Getac V100M Owner's Manual

V100

USER’S MANUAL

Rugged Mobile Computing Solutions

R01 (March 2009)

TRADEMARKS
All brand and product names are trademarks or registered trademarks of
their respective companies.

NOTE
The information in this manual is subject to change without notice.

ENERGY STAR® is a government program that offers businesses and
consumers energy-efficient solutions, making it easy to save money while
protecting the environment for future generations.

Please reference ENERGY STAR® related information from

www.energystar.gov.

As an ENERGY STAR® Partner, MiTAC Technology Corporation has
determined that this product meets the ENERGY STAR® guidelines for
energy efficiency.

An ENERGY STAR® qualified computer uses 70 % less electricity than
computers without enabled power management features.

Earning the ENERGY STAR®

 When every home office is powered by equipment that has earned the

ENERGY STAR®, the change will keep over 289 billion pounds of
greenhouse gases out of the air.

 If left inactive, ENERGY STAR

mode and may use 15 watts or less. New chip technologies make power
management features more reliable, dependable, and user-friendly than
even just a few years ago.

 Spending a large portion of time in low-power mode not only saves

energy, but helps equipment run cooler and last longer.

 Businesses that use ENERGY STAR

realize additional savings on air conditioning and maintenance.

®

qualified computers enter a low-power

®

enabled office equipment may

 Over its lifetime, ENERGY STAR

®

qualified equipment in a single home
office (e.g., computer, monitor, printer, and fax) can save enough
electricity to light an entire home for more than 4 years.

 Power management (“sleep settings”) on computers and monitors can

result in much savings annually.

Remember, saving energy prevents pollution

Because most computer equipment is left on 24 hours a day, power
management features are important for saving energy and are an easy way
to reduce air pollution. By using less energy, these products help lower
consumers’ utility bills, and prevent greenhouse gas emissions.

Table of Contents

Chapter 1 Getting Started ............................................................. 1-1

Getting the Computer Running ............................................. 1-2

Unpacking ........................................................................... 1-2

Connecting to AC Power .................................................... 1-3

Opening and Closing the Cover ........................................ 1-4

Operating in Tablet Mode ................................................. 1-6

Turning On and Off the Computer ................................... 1-8

Attaching the Hand Strap .................................................. 1-9

Taking a Look at the Computer ........................................... 1-11

Front Components ............................................................ 1-11

Rear Components ............................................................. 1-13

Right-Side Components .................................................... 1-14

Left-Side Components ...................................................... 1-14

Bottom Components ........................................................ 1-16

Top-open Components ..................................................... 1-17

Chapter 2 Operating Your Computer ............................................ 2-1

Starting and Stopping the Computer .................................... 2-2

Starting the Computer ....................................................... 2-2

Stopping the Computer ..................................................... 2-2

Using the Internal Keyboard .................................................. 2-4

Typewriter Keys .................................................................. 2-4

Cursor-Control Keys ............................................................ 2-5

Numeric Keypad ................................................................. 2-5

Function Keys ...................................................................... 2-6

Fn Key .................................................................................. 2-6

Hot Keys .............................................................................. 2-6

Using the Software Keyboard ................................................ 2-9

Using the Touchpad .............................................................. 2-10

Configuring the Touchpad ............................................... 2-12

Using the Touchscreen (Optional) ....................................... 2-13

Using the Active Digitizer Feature (Optional) .................... 2-15

Using the Hard Disk Drive .................................................... 2-18

Using OSD Control Panel ...................................................... 2-19

Using the Video Features ..................................................... 2-20

Configuring the Display Modes ....................................... 2-20

Using the Audio Features ..................................................... 2-22

Connecting Audio Devices ............................................... 2-23

Using G-Camera Lite ............................................................. 2-24

Using the Communication Features .................................... 2-25

Using the Modem ............................................................. 2-25

Using the LAN ................................................................... 2-26

Using the Wireless LAN .................................................... 2-27

Using the Bluetooth Feature ........................................... 2-32

Using the GPS .................................................................... 2-35

Chapter 3 Managing Power ........................................................... 3-1

AC Adapter .............................................................................. 3-2

Battery Pack ............................................................................. 3-3

Charging the Battery Pack ................................................. 3-3

Checking the Battery Level ................................................ 3-4

Replacing the Battery Pack ................................................ 3-5

Battery Low Signals and Actions ....................................... 3-7

Power Management ............................................................... 3-8

Hibernation ......................................................................... 3-9

Power-Saving Tips ................................................................. 3-10

Chapter 4 Expanding Your Computer ........................................... 4-1

Connecting an External Monitor (Optional) ......................... 4-2

Connecting a Serial Device ..................................................... 4-4

Connecting a USB Device ....................................................... 4-5

Using Smart Cards (Optional) ................................................. 4-6

Inserting and Removing a Smart Card .............................. 4-6

Using PC Cards ......................................................................... 4-8

Inserting and Removing a PC Card .................................... 4-8

Using ExpressCards (Optional) ............................................. 4-10

ExpressCard Type .............................................................. 4-10

Inserting and Removing an ExpressCard ......................... 4-11

Using the Card Reader .......................................................... 4-12

Using the Port Replicator (Optional) ................................... 4-14

System Memory Upgrade ..................................................... 4-16

Chaper 5 Using BIOS Setup and System Recovery ...................... 5-1

BIOS Setup ............................................................................... 5-2

When to Use BIOS Setup .................................................... 5-2

Main Menu .......................................................................... 5-5

Advanced Menu .................................................................. 5-6

Security Menu ..................................................................... 5-7

Boot Menu .......................................................................... 5-9

Exit Menu .......................................................................... 5-10

System Recovery .................................................................... 5-11

Chapter 6 Installing Software Drivers and Utilities .................... 6-1

How to Use the Driver Disc .................................................... 6-2

Installation for Windows XP .................................................. 6-4

Installation for Windows Vista ............................................... 6-8

Chapter 7 Using Management Utilities ......................................... 7-1

Using G-Manager .................................................................... 7-2

Using Button Manager ........................................................... 7-4

Chapter 8 Caring for the Computer .............................................. 8-1

Protecting the Computer ....................................................... 8-2

Using the Windows Security Center .................................. 8-2

Using the Cable Lock .......................................................... 8-3

Taking Care of the Computer ................................................ 8-4

Location Guidelines ............................................................ 8-4

General Guidelines ............................................................. 8-4

Cleaning Guidelines ............................................................ 8-5

Battery Pack Guidelines ...................................................... 8-5

Touchscreen Guidelines ...................................................... 8-6

When Traveling ....................................................................... 8-8

Chatper 9 Troubleshooting ............................................................ 9-1

Preliminary Checklist ............................................................... 9-2

Solving Common Problems .................................................... 9-3

Battery Problems ................................................................ 9-3

Bluetooth Problems ............................................................ 9-3

Display Problems ................................................................. 9-4

Hardware Device Problems ................................................ 9-5

Hard Disk Drive Problems ................................................... 9-5

Keyboard, Mouse, and Touchpad Problems ..................... 9-6

LAN Problems ...................................................................... 9-6

WLAN Problems .................................................................. 9-7

Modem Problems ................................................................ 9-8

PC Card Problems ................................................................ 9-9

Power Management Problems .......................................... 9-9

Software Problems ........................................................... 9-10

Sound Problems ................................................................ 9-10

Startup Problems .............................................................. 9-11

Other Problems ................................................................. 9-11

Resetting the Computer ....................................................... 9-12

Appendix A Specifications ............................................................... A-1

Appendix B Regulatory Information ............................................... B-1

On the Use of the System ....................................................... B-2

Class B Regulations ............................................................. B-2

Safety Notices ..................................................................... B-3

On the Use of the RF Device .................................................. B-6

USA and Canada Safety Requirements and Notices ........ B-6

European Union CE Marking and Compliance Notices .... B-9

Chapter 1

Getting Started

Congratulations on purchasing this rugged computer.

This chapter first tells you step by step how to get the computer up and
running. Then, you will find a section briefly introducing the external
components of the computer.

Getting the Computer Running

This section guides you through the procedures for getting the computer
ready for operation.

Unpacking

After unpacking the shipping carton, you should find these standard items:

 Notebook computer

 Accessories:

 AC adapter
 AC power cord
 Grid-type hand strap
 Driver disc
 Stylus (option)
 Digitizer pen (option)
 Size “AAAA” battery (option)

Inspect all the items. If any item is damaged or missing, notify your dealer
immediately.

Keep the shipping carton and packing materials in case you need to ship or
store the computer in the future.

Connecting to AC Power

The computer operates either on the external AC power or internal battery
power. It is suggested that you use AC power when you start up the
computer for the very first time.

1. Make sure that the computer is turned off.

2. Plug the DC cord of the AC adapter to the power connector of the

computer ().

3. Plug the female end of the AC power cord to the AC adapter and the

male end to an electrical outlet ().

4. When the AC adapter is connected, power is being supplied from the

electrical outlet to the AC adapter and onto your computer. Now, you
are ready to turn on the computer.

Latch A
Latch B





Opening and Closing the Cover

Open the top cover by pulling up on latch A and releasing latch B () and
lifting up the cover (). You can tilt the cover forward or backward for
optimal viewing clarity.

Close the top cover by closing the display (). Then position latch B on the
display side and bring latch A down () to fix the display in place.

Latch A

Latch B

Operating in Tablet Mode

In addition to being used as a regular notebook computer (Laptop mode),
your computer can also be operated in Tablet mode. In Tablet mode, the
computer can be operated using the touchscreen or active digitizer feature
with the software keyboard (see chapter 2), and the tablet buttons (see later
section on “Front Components”), instead of the internal keyboard and the
touchpad.

1. Open the top cover so that it is almost perpendicular with the keyboard

of the computer.

2. Turn the display counter-clockwise by 165

o

.

1. Close the computer with the display facing up (). Then pull up on the

latch A.

Latch A
Latch B

2. Position the latch B on the display side, then bring latch A down () to

fix the display in place.

In Tablet mode, the computer can be operated while holding it as shown.

To return to Laptop mode, perform the steps for changing the computer
into Tablet mode in reverse order.

Turning On and Off the Computer

Turning On

1. Make sure that the computer is connected to AC power.

2. Press the power button ( ).

3. Each time the computer is turned on, it performs a Power-On Self Test

(POST), and the operating system such as Windows should start.

Turning Off

To turn off the computer power, use the “Shut Down” command of your

operating system.

Attaching the Hand Strap

The hand strap can be attached to any two sides of the four (option) corners
of your computer.

Standard setup: two buckles on the left/right front side of your computer.

To release, press on the right spring latch first to detach the right side. Then
release the left side.

Optional setup: buckles on four corners of your computer.





Ref

Component

Description



Hand Strap
Holder

The hand strap can be attached to the two holders for
convenient handling of your computer.



OSD Control
Button

Toggles the OSD (On Screen Display) control panel ON
and OFF.



Sunlight­readable

Button

Toggles the sunlight-readable function ON and OFF.

IMPORTANT: To prevent burns to your fingers if using
the computer (especially in Tablet Mode) with
sunlight-readable mode turned on, do wear gloves
when touching the top portion of the LCD display as it
may be hot to the touch.



RF Button

Toggles the wireless LAN /

Bluetooth

®

wireless / 3G

power ON and OFF.



Reset Button

Serves as the Ctrl+Alt+Del keyboard buttons.

Taking a Look at the Computer

Front Components

Ref

Component

Description



Software
Keyboard

Button

Shows or hides the software keyboard on your LCD
display.



Top Cover
Latch

Locks the top cover.



Power
Button

Turns the computer power ON and OFF.

TABLE NOTE: Quick buttons (items  to ) can be re-defined using the
Button Manager utility. (See “Using Button Manager” in Chapter 7 for

information.)

Ref

Component

Description



Hand Strap
Holder

The hand strap can be attached to the two holders
for convenient handling of your computer.



Audio Output
Connector

Connects a set of headphones, external speakers
with amplifier, or an audio recording device.



Microphone
Connector

Connects an external microphone.



Kensington
Lock

Locks the computer to a stationary object for
security.



VGA Connector

Connects an external display monitor.
NOTE: Depending on your model, this port could be

a serial connector.



Serial
Connector

Connects a serial mouse or serial communication
device.

Rear Components

Ref

Component

Description



Battery Pack
Compartment

Inside is the battery pack that supplies power to
your computer when external power is not
connected.



Hard Disk Drive
Compartment

Inside is the hard disk drive.

Ref

Component

Description



Power Connector

Connects the AC adapter.



USB Ports

Each of the two ports connects a USB device, such
as a flash disk, printer, digital camera, joystick, and
more.

Right-Side Components

Left-Side Components



RJ-11 Connector

Connects the telephone line.



RJ-45 Connector

Connects the LAN cable.



ExpressCard Slot

(upper)

Accepts an ExpressCard for additional functions
(option).

PCMCIA Slot

(lower)

Accepts a PC card for additional functions.
OR

PCMCIA Slot

(upper)

Accepts a PC card for additional functions.

Smart Card
Reader (lower)

Accepts a smart card for additional security feature
(option).



Card Reader

Accepts a SD (Secure Digital) card for removable
storage media.

Ref

Component

Description



Antenna
Connector

Inside is the connector for using an external
antenna.



Expansion Bus
Connector

Inside is the expansion bus connector for using a
Port Replicator.



Wireless LAN
(WLAN) Card Slot

Inside is the mini PCI-E slot for using a mini PCI-E
WLAN card.



Speaker

Sends out sound and voice from your computer.



Memory Slot

Inside is the memory slot for expanding the
memory size of your computer.

Bottom Components

Ref

Component

Description



Webcam Lens

(option)

Allows you to use your computer’s camera function.
(Not shown in the illustration)



WLAN
Antenna

Inside is the antenna for wireless LAN (local area
network) transmission.



WWAN 3G
Antenna

(option)

Inside is the antenna for optional wireless WAN (wide
area network) 3G transmission.



LCD Screen

Displays the output of the computer.



Light Sensor

Adjusts the LCD brightness and optional keyboard
backlight automatically surrounding.

Top-open Components

Ref

Component

Description



Keyboard

Serves as the data input device of the computer.



Touchpad

Serves as the pointing device of the computer.



Indicators

Show the current status of the computer’s devices.

AC Power

Lights green when the computer is turned on and
using AC power.

Battery

Charge

Lights green when the battery is fully charged.

Lights yellow when the battery is being charged.

Blinks yellow when the battery’s capacity is below 10
%.

Blinks green and yellow by turns when battery’s
temperature is too high (over 60 oC).

Hard Disk

Drive In-Use

Lights green when computer is accessing the hard disk
drive.

Lights red when optional hard disk drive heater is on
for low temperature operation.

RF

Lights when wireless LAN /

Bluetooth

®

wireless / 3G

power is on.

Num Lock

Lights when Num Lock is on.

Caps Lock

Lights when Caps Lock is on.



Stylus

Provides a convenient way to use the touchscreen. Can
be stretched for better grip and handling.



Bluetooth
Antenna

(option)

Inside is the antenna for optional Bluetooth feature
transmission.

Chapter 2

Operating Your
Computer

This chapter provides information about the use of the computer.

If you are new to computers, reading this chapter will help you learn the
operating basics. If you are already a computer user, you may choose to read
only the parts containing information unique to your computer.

To stop in

this mode...

Do this...

To start up or
resume again

Off

Follow the shutdown procedure of your
operating system. This can prevent loss of
unsaved data or damage to your software
programs.

If the system is locked up because of
hardware or software problems, press the
power button to turn off the computer.

Press the power
button.

Standby

Depending on your settings in Windows,
you can place the computer in Standby
mode by:

Press any key.

Starting and Stopping the
Computer

There are a number of ways to start and stop the computer.

Starting the Computer

You always start the computer using the power button.

A computer starts up with an operating system (OS) existing on the storage
device such as the hard disk. The computer will automatically load the OS
after you turn it on. This process is called booting.

Stopping the Computer

When you finish a working session, you can stop the computer by turning
off the power or leaving the computer in Standby or Hibernation mode:

To stop in

this mode...

Do this...

To start up or
resume again

 Closing the display cover
 Pressing the Fn+F10 hot key
 Pressing the power button

Hibernation

Depending on your settings in Windows,
you can place the computer in
Hibernation mode by:

 Closing the display cover
 Pressing the power button

Press the power
button.

If you choose to stop in Standby or Hibernation mode, you can return to

where you left off the next time you start up the computer. (See “Power
Management” in Chapter 3 for more information.)

Using the Internal Keyboard

Your keyboard has all the standard functions of a full-sized computer
keyboard plus an Fn key added for specific functions.

The standard functions of the keyboard can be further divided into four
major categories:

 Typewriter keys

 Cursor-control keys

 Numeric keys

 Function keys

Typewriter Keys

Typewriter keys are similar to the keys on a typewriter. Several keys are
added such as the Ctrl, Alt, Esc, and lock keys for special purposes. When the
lock keys ( aps Lock and Num Lk) are pressed, their corresponding indicators
light up.

The Control (Ctrl) / Alternate (Alt) key is normally used in combination with
other keys for program-specific functions. The Escape (Esc) key is usually
used for stopping a process. Examples are exiting a program and canceling a
command. The function depends on the program you are using.

Cursor-Control Keys

Numeric Keypad

A 15-key numeric keypad is embedded in the typewriter keys as shown next:

Numeric keys facilitate entering of numbers and calculations. When Num
Lock is on, the numeric keys are activated; meaning you can use these keys
to enter numerals.





Function Keys

On the top row of the keys are the function keys: to . Function keys
are multi-purpose keys that perform functions defined by individual
programs.

Fn Key

Fn

The key, at the lower left corner of the keyboard, is used with another

key to perform the alternative function of a key. The letter “Fn” and the

alternative functions are identified by the color of blue on the keytop. To
perform a desired function, first press and hold , then press the other key.

Hot Keys

Hot keys refer to a combination of keys that can be pressed any time to
activate special functions of the computer. Most hot keys operate in a cyclic
way. Each time a hot key combination is pressed, it shifts the corresponding
function to the other or next choice.

You can easily identify the hot keys with the icons imprinted on the keytop.
The hot keys are described next.

Key

Description

Switches the wireless LAN radio on and off.
NOTE: This function works only if an optional mini PCI-E

wireless LAN card is installed.

Decreases the sound volume.

Increases the sound volume.

Decreases the LCD brightness (20 levels).

Increases the LCD brightness (20 levels).

Switches the system sound output off (mute) and on.

Switches LCD backlight on and off.

Switches the display output when external devices are
connected.

NOTE: This function only applies to Plug & Play display
devices.

Serves as the sleep button that you can define with

Windows’ Power Options. (See the “Power Management”

in Chapter 3.)

Euro Symbol

You can press the euro dollar sign on various keyboards.

 To press the euro sign on a United States-International keyboard, hold

down the Alt Gr key and press 5 (which has an euro sign on it).

 To press the euro sign on a standard United States keyboard, hold down

either of the Alt keys and type 0128 on the numeric keypad part of your
keyboard.

 To press the euro sign on an UK keyboard, hold down the Alt Gr key and

press 4 (which has an euro sign on it).

Windows Keys

The keyboard has two keys that perform Windows-specific functions:
Windows Logo key and Application key.

The Windows Logo key opens the Start menu and performs
software-specific functions when used in combination with other keys. The

Application key usually has the same effect as a right mouse click. (See

your Windows manual for more information.)

Using the Software Keyboard

When using the computer in Tablet mode, you can use the software
keyboard.

1. Press the software keyboard button ( ) and the software keyboard

will appear onscreen.

2. Enter the characters with the stylus.

NOTE:

Using the Touchpad

The touchpad is a pointing device that allows you to communicate with the
computer by controlling the location of the pointer on the screen and
making selection with the buttons.

The touchpad consists of a rectangular pad (work surface) and a left and
right buttons. To use the touchpad, place your forefinger or thumb on the
pad. The rectangular pad acts like a miniature duplicate of your display. As
you slide your fingertip across the pad, the pointer (also called cursor) on the
screen moves accordingly. When your finger reaches the edge of the pad,
simply relocate yourself by lifting the finger and placing it on the other side
of the pad.

Here are some common terms that you should know when using the
touchpad:

Term

Action

Point

Move your finger on the pad until the cursor points to the
selection on the screen.

Click

Press and release the left button.

–or–

Tap gently anywhere on the pad.

Double-click

Press and release the left button twice in quick succession.

–or–

Tap twice on the pad rapidly.

Drag and
drop

Press and hold the left button, then move your finger until
you reach your destination (drag). Finally, release the
button (drop) when you finish dragging your selection to
the destination. The object will drop into the new location.

–or–

Gently tap twice on the pad and on the second tap, keep
your finger in contact with the pad. Then, move your
finger across the pad to drag the selected object to your
destination. When you lift your finger from the pad, the
selected object will drop into place.

Scroll

To scroll is to move up and down or left and right in the
working area on the screen.

To move vertically, place your finger on the right or left
edge of the pad and slide your finger up and down along
the edge. To move horizontally, place your finger on the
top or bottom edge of the pad and slide your finger left
and right.

This function works only after you install the touchpad
driver supplied with the computer and it may not work for
all applications.

TABLE NOTE: If you swap the left and right buttons, “tapping” on the
touchpad as an alternative method of pressing the left button will no longer
be valid.

Configuring the Touchpad

You may want to configure the touchpad to suit your needs. For example, if
you are a left-handed user, you can swap the two buttons so that you can
use the right button as the left button and vice versa. You can also change
the size of the on-screen pointer, the speed of the pointer, and so on.

To configure the touchpad, go to Control Panel  Hardware and Sounds 

Mouse Properties.

Using the Touchscreen (Optional)





The touchscreen is a touch-sensitive device that allows you to easily use the
computer without a mouse or touchpad to communicate with the computer
by controlling the location of the pointer on the screen and making
selection with the buttons.

Term

Action

Click/Point

Tap gently on the touchscreen.

Double-click

Tap twice on the touchscreen rapidly.

Drag and drop

Press lightly on the touchscreen and move your finger
until you reach your destination (drag). Finally, release
your finger (drop) when you finish dragging your
selection to the destination. The object will drop into the
new location.

Here are some common terms that you should know when using the
touchscreen:

Using the Active Digitizer Feature
(Optional)





The active digitizer feature allows you to easily use the computer without a
mouse, keyboard, or touchpad to communicate with the computer by using
the optional digitizer pen.

Term

Action

Move

Move the cursor pointed by the digitizer
pen.

Click/Point

Tap gently on the display.

Double-click

Tap twice on the display rapidly.

Drag and
drop

Press lightly on the display and move your
digitizer pen until you reach your
destination (drag). Finally, release your
digitizer pen (drop) when you finish
dragging your selection to the
destination. The object will drop into the
new location.

Right-click

Press and hold down the digitizer pen
button (A), then tap gently the object.

When using the digitizer pen, be sure to install the included size “AAAA”
battery.

Here are some common terms that you should know when using the active
digitizer feature:













Using the Hard Disk Drive

Your computer comes with a removable hard disk drive as drive C. A hard
disk drive is a storage device with non-removable, rotating, magnetic
storage platters inside it. It is where your operating system and application
software programs are stored.

Your hard disk drive is a 2.5-inch SATA (serial ATA) hard disk drive. This type
of drive embodies the latest in fast, reliable mass storage by integrating all
the control circuitry necessary for operation directly onto the drive itself.

You can enable the Advanced Host Controller Interface (AHCI), a
programming interface for SATA host controllers. AHCI defines transactions
between the SATA controller and software and enables advanced
performance and usability with SATA. When the SATA AHCI mode is
enabled, your system can support SATA native command queuing,
aggressive power management, and so on.

The system may come with an optional heater that automatically turns on
for low temperature operation.





Using OSD Control Panel

The OSD Control Panel allows you to easily activate or operate certain
functions on your computer.

To use the OSD Control Panel:

1. Press the button

2. The following screen appears, providing several control buttons.

on the front of your computer.

For detailed descriptions of the Control Panel, click the

3. To close the Control Panel, either press the button

again or click the

button .

button.

on your computer

Using the Video Features

The video subsystem of your computer features:

 10.4-inch wide TFT (Thin-Film Transistor) color LCD display with

1024×768 XGA resolution

 Simultaneous display on LCD and external monitor, which is useful when

you have a presentation as you can control the screen from your
computer and face the audience at the same time (option)

 Multi-display capability, which allows you to expand your desktop on the

screen to another display device so that you have more desktop space to
work on



Built-in light sensor to automatically adjust the LCD brightness and
optional keyboard backlight

 Power Management

 Sunlight-readable LCD display





Power Options

Configuring the Display Modes

Your computer has been set to a default resolution and number of colors
before shipment. You can view and change display settings through your

operating system. See your operating system documentation or online help
for specific information.

For displaying in higher resolutions, you can connect an external monitor
that supports higher resolutions. (See “Connecting an External Monitor” in
Chapter 4 for more information.)

Using the Audio Features





The audio subsystem of your computer features:

 Built-in sound system for recording and playing sound on your computer

 Azalia interface (high density audio codec)

 Speaker (located on bottom side), and

 External audio connectors

Ways of playing and recording sound vary with the operating system used.
See your operating system documentation or online help for specific
information.

Connecting Audio Devices

For higher audio quality, you can send or receive sound through external
audio devices.

 Audio Output Connector (

) can be connected to speakers,

headphones, or earphone set.

 Microphone Connector (

) can be connected to an external

microphone for recording voice or sound.

Mode

Current settings

Setting buttons for
different modes

Using G-Camera Lite

G-Camera Lite allows you to take pictures with the Webcam, if supplied with
your computer.

To start G-Camera Lite, click Start  All Programs  G-Camera Lite 
G-Camera Lite. The camera control panel appears.

Click the Shutter button

For detailed descriptions of G-Camera Lite, click the button .

or press Enter to take photos.

Using the Communication
Features

Using the Modem

The internal 56 K fax/data modem allows you to use the telephone line to
communicate with others by fax, email, or connect to an online service or
bulletin board.

To connect the telephone line to the modem, connect one end of the
modem cable to the RJ-11 connector on the computer and the other end to
the phone line.








Using the LAN

The internal 10/100/1000Base-T LAN (Local Area Network) module allows
you to connect your computer to a network. It supports data transfer rate up
to 1000 Mbps.

To connect the network cable to the LAN module, connect one end of the
LAN cable to the RJ-45 connector on the computer and the other end to the
network hub.

Technology

802.11a

802.11g

802.11n

Stated Maximum
Throughput
(Mbps)

54

54

100 Mbps or more

Data Rates (Mbps)

54, 48, 36, 24, 18,
12, 9, 6

54, 36, 18, 9

100 ~ 210
Band (GHz)

5.15 ~ 5.35

2.4

2.4 / 5

Modulation
Technology

OFDM (Orthogonal
Frequency Division
Multiplexing)

OFDM (Orthogonal
Frequency Division
Multiplexing)

Spatial multiplexing,
uses MIMO
(multiple-input
multiple-output)

Using the Wireless LAN

Depending on your model, an internal mini PCI-E wireless LAN (WLAN) card
may have been pre-installed by your computer manufacturer at the factory.
This card allows you to access corporate networks or the Internet in a
wireless environment.

The WLAN features include:

 Peer-to-Peer (Ad-Hoc) and Access Point (Infrastructure) modes support

 WEP (Wired Equivalent Privacy) 64/128-bit data encryption

 IEEE 802.11a/g/n standard compliance

To take advantage of the WLAN feature, make sure that the WLAN driver is
installed correctly. If your WLAN card was provided by your dealer instead of
the computer manufacturer, contact your dealer for the correct driver to
use.

Installing the Mini PCI-E WLAN Card

In case the mini PCI-E WLAN card has not been installed in your computer,
perform the following:

1. Remove the battery pack (see chapter 3) and make sure that the

computer is not connected to AC power.

2. Carefully place the computer upside down.

3. Remove the two screws and open the compartment cover.

4. To install the card, match the notched part of the card with the socket’s

projected part, and firmly insert the card into the socket horizontally.

5. Secure with two screws.

6. Connect the antenna cable (see label for the correct one) to the “MAIN”

and “AUX” antenna connectors on the card.

7. Close the compartment cover and secure with two screws.

Turning Off/On the WLAN Radio

Your computer has a built-in Fn+F2 WLAN hot key to switch the WLAN

on/off (see “Hot Keys” in Chapter 2). If you need to temporarily turn off the
radio, press Fn+F2. To resume network connection, press Fn+F2 again.

It takes approximately 30 seconds for your computer to make a successful
WLAN connection and approximately 10 seconds to disconnect.

Connecting to a Wireless Network

To connect to a wireless network:

1. Make sure that the WLAN radio is on (controlled by Fn+F2).

2. Click Start  Programs  Intel PROSet Wireless  Intel PROSet

Wireless.

3. If any wireless network is detected, the following window appears on

screen.

4. Click to select a wireless network to connect to, and then click Connect.

5. Depending on the settings, you may be asked to enter a wireless security

password (encryption key).

For more information on the Intel PROSet Wireless utility, click Help? in the

Intel(R) PROSet/Wireless window.

Status

Icon

On

(blue with white logo).

Connected

(blue with green logo)

Using the Bluetooth Feature

Depending on your model, your computer may incorporate the Bluetooth
capability for short-range (about 10 meters) wireless communications
between devices without requiring a cable connection.

With Bluetooth, data can be transmitted through walls, pockets and
briefcases as long as two devices are within range. By default, your
computer’s Bluetooth feature is active (always ON) upon booting your
computer and is in the general discoverable and pairable mode.

The status of the Bluetooth connection is indicated by the Bluetooth icon
located in the system tray in the lower-right part of the screen.

You can use the Bluetooth Utility to configure Bluetooth connection settings
and transfer files.

Connecting to Another Bluetooth Device

1. Make sure that the target Bluetooth device is turned on, discoverable

and within close range. (See the documentation that came with the
Bluetooth device.)

2. To search for Bluetooth devices, use any of the following three methods:

Method 1:

Right click the Bluetooth icon located in the system tray in the
lower-right part of the screen. Select Explore Bluetooth Places.

Method 2:

Right click the Bluetooth icon located in the system tray in the
lower-right part of the screen. Select Display Classic View. The Bluetooth
utility screen appears. Right click the central icon (the yellow sun) and
select Search Devices.

Method 3:

Use Windows File Manager to browse to Bluetooth Places and select
Search Devices.

3. Select the device you want to connect from the search results.

4. Depending on the type of Bluetooth device that you want to connect to,

you will need to enter the pertinent information.

For detailed information on using the Bluetooth Utility, see the Bluetooth
Utility Help

Using the GPS





Navigation and positioning are crucial to so many activities. To try to figure
out where you are and where you are going, you need GPS technology. The
Global Positioning System (GPS) is a worldwide radio-navigation system.

Chapter 3

Managing Power

Your computer operates either on external AC power or on internal battery
power.

This chapter tells you how you can effectively manage power. To maintain
optimal battery performance, it is important that you use the battery in the
proper way.

AC Adapter









The AC adapter serves as a converter from AC (Alternating Current) to DC
(Direct Current) power because your computer runs on DC power, but an
electrical outlet usually provides AC power. It also charges the battery pack
when connected to AC power.

The adapter operates on any voltage in the range of 100~240 V AC.

Battery Pack

The battery pack is the internal power source for the computer. It is
rechargeable using the AC adapter.

The operating time of a fully charged battery pack depends on how you are
using the computer. When your applications often access peripherals, you
will experience a shorter operating time.

Charging the Battery Pack

  

 



 



To charge the battery pack, connect the AC adapter to the computer and an
electrical outlet. The Battery Charge Indicator (
yellow to indicate that charging is in progress. You are advised to keep the

computer power off while the battery is being charged. When the battery is
fully charged, the Battery Charge Indicator is off.

It takes approximately 3 hours to fully charge the Li-Ion battery pack when
the computer is off, and approximately 6 hours to fully charge the Li-Ion
battery pack when the computer is on.

) on the computer glows

Switch

Checking the Battery Level

By Operating System

You can check the approximate battery level using the battery meter
function of the operating system. To read the battery level in Windows, click

the icon on the taskbar. (Click the icon if the computer is using AC
power.)

By Gas Gauge

On the exterior side of the battery pack is a gas gauge for displaying the
estimated battery charge. When the battery pack is not installed in the
computer and you want to know the battery charge, you can press the
switch with a pointed device to see the corresponding value of indicator
segment that light green.

The value of the corresponding green segment indicates the relative
percentage of the battery charge. The battery pack is fully discharged when
you see no segment glowing green.

Replacing the Battery Pack





If you often rely on battery power for a long period of time while traveling,
you may consider the purchase of an additional battery pack from your
dealer and keep it with you in a fully charged state as a backup.

To replace the battery pack, follow these steps:

1. Make sure that the computer is not turned on or connected to AC

power.

2. Locate the battery compartment on the right side of the computer.

3. Open the compartment cover by pressing on both sides of the release

latch using your thumb and index fingers.

4. Pull on the ribbon strip to remove the battery pack.

5. Slide the new battery pack all the way into the slot. Make sure to

observe the correct orientation (the ribbon strip must face outward for
future battery back removal).

6. Close the compartment cover to secure the battery pack.

Battery Low Signals and Actions

Battery Low occurs when the battery has approximately 10 % (Windows
default setting) of its charge remaining. The computer gives warning beeps

or messages and the Battery Charge Indicator (
you to take actions.

Immediately save your data upon Battery Low. The remaining operating
time depends on how you are using the computer. If you are using the audio
subsystem, PC card, hard or USB flash disk, the battery might run out of
charge very quickly.

Always respond to Battery Low by placing your computer on the Standby or
Hibernation mode, turning off the computer, or connecting the AC adapter.

If you do not take any action, the computer will automatically hibernate and
turn off.

) blinks yellow to alert





What...

When...

Power to the hard disk is turned
off

When the hard disk has been idle for a
set period.

Power to the display is turned off

When the display has been idle for a set
period.

The computer enters the Standby
mode. The hard disk and display
are turned off and the entire
system consumes less power.

When the entire system has been idle for
a set period.

When you press the Fn+F10 hot key. *

When you close the cover. *

When you press the power button. *

The computer enters the
Hibernation mode. (See the next
subsection for more
information.)

When you press the Fn+F10 hot key. *

When you close the cover. *

When you press the power button. *

Power Management

Your computer supports ACPI (Advanced Configuration and Power
Interface) for power management. The power management feature allows
you to reduce the power consumption for energy saving.

With an ACPI-compliant operating system such as Windows, power supply to
different computer components is controlled on an as-needed basis. This
allows maximum power conservation and performance at the same time.

In general, Windows’ power management works in this way:

* Depends on your settings in Windows.

For detailed information on power management, see Windows’ Help.

Hibernation

Hibernate

Power Options

Hibernation is a very useful feature. People frequently open many
applications when they use computers. It takes some time to get all these
applications open and running, and normally they all have to be closed
before the computer can be turned off.

When you use the hibernation feature, you do not have to close the
applications. The computer stores the state of your computer to a file on the
hard disk and then shuts down. The next time you turn on your computer,
you return to exactly where you left off.

Power-Saving Tips

Aside from enabling your computer’s power saving mode (see previous
section), you can do your part to maximize the battery’s operating time by
following these suggestions.

 Do not disable Power Management.

 Decrease the LCD brightness to the lowest comfortable level.

 Shorten the length of time before Windows turn off the display.

 Many USB devices use power just by being connected. If you use a USB

mouse, you can save power by disconnecting the mouse and using the
touchpad. If you use a USB flash drive, unplug it when you are not using
it.

 If you work with an application that uses a PC card, exit the application

when you finish using it.

 If you have a PC card installed, remove it when not in use. Some PC cards

drain power even while they are inactive.

 Deactivate the WLAN function if you are not using it (see Chapter 2).

 Deactivate the

Bluetooth

®

wireless function if you are not using it (see

Chapter 2).

 Turn off the computer when you are not using it.

Chapter 4

Expanding Your
Computer

You can expand the capabilities of your computer by connecting other
peripheral devices. When using a device, be sure to read the instructions
accompanying the device together with the relevant section in this chapter.

Connecting an External Monitor
(Optional)

If you want the benefits of a larger display screen with higher resolution,
you can connect an external display monitor to your computer. Follow this
procedure to connect an external monitor:

1. Make sure that the computer is not turned on.

2. Plug the monitor’s D-type signal connector to the computer’s VGA

connector.

3. Plug one end of the monitor’s power cord into the power socket on the

monitor and the other end to an electrical outlet.

4. To use the monitor, turn on the monitor before turning on the

computer.

5. The monitor should respond by default. If not, you can switch the display

to the monitor or to both (simultaneous display), or to multi-display by
pressing the Fn+F9 hot key. In Windows, you can also change the display
through the settings in Display Properties.

6. You can change display settings through your operating system. See

your operating system documentation or online help for specific
information.

Connecting a Serial Device

Your computer has one or two serial port (depending on model) for
connecting a serial device such as a serial mouse or serial communication
device (modem).

Follow this procedure to connect a serial device:

1. Make sure the computer is not turned on

2. Plug the device cable to the serial port on the rear of the computer.

3. Turn on the computer.

Connecting a USB Device

Your computer has two USB ports for connecting USB devices, such as a
digital camera, scanner, printer, modem, and mouse.

The USB ports support transfer rates up to 12 MB/s for USB 1.1 devices and
480 MB/s for USB 2.0 devices.

To connect a USB device, simply plug the device cable to one of the USB
ports.

Eject button

Using Smart Cards (Optional)

Your computer may have a smart card slot for additional security feature,
providing tamper-proof storage of user and account identity. A smart card is
a type of plastic card embedded with a computer chip that stores and
transacts data between you (user) and the computer.

You need to install third-party smart card software to take advantage of the
smart card feature.

Inserting and Removing a Smart Card

To insert a smart card:

1. Locate the smart card slot.

2. Slide the smart card, with its label and embedded computer chip facing

up into the slot.

3. When a new card is seated, use the third-party smart card software to

allow your computer to read it.

To remove a smart card:

1. Make sure that the third-party smart card software is not accessing the

smart card.

2. Pull the card out of the slot.

Eject button

Using PC Cards

Your computer has one or two PC card slots that support CardBus
specifications. The slots can accommodate a type II card. Typical type II cards
are flash memory, SRAM, modem, LAN, and SCSI cards.

Inserting and Removing a PC Card





To insert a PC card:

1. Locate the PC card slot on the left side of the computer.

2. Slide the PC card, with its label facing up, into the slot until the eject

button pops out.

3. When a new card is seated, the computer will detect it and try to install

the appropriate driver. Follow the on-screen instructions to complete the
process.

To remove a PC card:

1. Double-click on the Safely Remove Hardware icon found on the

Windows taskbar and the Safely Remove Hardware window appears on
screen.

2. Select (highlight) the PC card from the list to disable the card.

3. Push the eject button and the card will slide out slightly.

4. Pull the card out of the slot.

Using ExpressCards (Optional)

Your computer may have an ExpressCard slot.

ExpressCard supports the PCI Express and USB 2.0 serial data interfaces
(supporting speeds of up to 2.5 Gbps and 480 Mbps respectively), improving
speed in data transfer while conserving power usage.

ExpressCard Type

The ExpressCard slot can accommodate a 54 mm (ExpressCard/54) or
34 mm (ExpressCard/34) wide ExpressCard. Typical ExpressCards support a
very extensive range of applications including memory, wired and wireless
communication cards, and security devices.

Shown next are the appearances of ExpressCards for your reference.

ExpressCard/54 ExpressCard/34

Eject button

Inserting and Removing an ExpressCard

To insert an ExpressCard:

1. Locate the ExpressCard slot on the left side of the computer.

2. Slide the ExpressCard, with its label facing up, all the way into the slot

until the rear connectors click into place.

3. When a new card is seated, the computer will detect it and try to install

To remove an ExpressCard:

1. Double-click on the Safely Remove Hardware icon found on the

2. Select (highlight) the ExpressCard from the list to disable the card.

3. Push the eject button and the card will slide out slightly.

4. Pull the card out of the slot.

the appropriate driver. Follow the on-screen instructions to complete the
process.

Windows taskbar and the Safely Remove Hardware window appears on
screen.

Using the Card Reader







Your computer has a Card Reader. The Card Reader is a small drive for
reading from and writing to removable storage cards (or called memory
cards). The Card Reader supports Secure Digital (SD) cards.

Shown next is the appearance and size of Secure Digital (SD) card type for
your reference.

24×32× 2.1 (mm)

To insert a storage card:

1. Locate the Card Reader slot on the left side of the computer.

2. Align the card with its connector pointing to the slot and its label facing

up. Slide the card into the slot until it reaches the end.

3. Windows will detect the card and assign it a drive name (typically E).

To remove a storage card:

1. Double-click My Computer.

2. Right-click the drive with the card and select Eject.

3. Pull the card out of the slot.

Using the Port Replicator
(Optional)

A port replicator is available as an option. This device eliminates the hassles
of having you connect and disconnect the various cables when carrying your
computer around and allows a variety of peripherals to be connected
including a headphone or microphone, etc. The port replicator connects to
the expansion bus connector at the bottom of your computer.

1. Slide open the expansion bus connector cover.

2. Connect your port replicator to the expansion bus connector.

For more detailed information, refer to the Operating Instructions of the
port replicator.

System Memory Upgrade

You can upgrade your computer by changing system memory to a maximum
of 4 GB on the DDR2 SO-DIMM slot.

To install the RAM module:

1. Remove the battery pack (see chapter 3) and make sure that the

computer is not connected to AC power.

2. Carefully place the notebook computer upside down.

3. Remove the two screws to open the compartment cover.

4. To install the RAM module, match the module's notched part with the

socket's projected part and firmly insert the module into the socket at a

20-degree angle. Then push down until the retaining clips lock the
module into position.

5. Close the compartment cover and secure with two screws.

Chapter 5

Using BIOS Setup and
System Recovery

BIOS Setup Utility is a program for configuring the BIOS (Basic Input/ Output
System) settings of the computer. BIOS is a layer of software, called
firmware, that translates instructions from other layers of software into
instructions that the computer hardware can understand. The BIOS settings
are needed by your computer to identify the types of installed devices and
establish special features.

System Recovery reinstalls Windows to your system and configures it to the
system’s factory default settings.

This chapter tells you how to use the BIOS Setup and System Recovery.

BIOS Setup

When to Use BIOS Setup

When to Use

You need to run BIOS Setup Utility when:

 You see an error message on the screen requesting you to run BIOS

Setup Utility.

 You want to restore the factory default BIOS settings.

 You want to modify some specific settings according to the hardware .

 You want to modify some specific settings to optimize the system

performance.

Starting BIOS Setup







To run BIOS Setup Utility, press the F2 key when the prompt appears on the
screen during the system startup. The prompt shows up on the screen for
only a few seconds. You must press the F2 key quickly. The BIOS Setup Utility
main screen appears as shown next.

V

Main Advanced Security Boot Exit

Model:

SATA Port 1

System Time:

System Date:

Processor Info:
Installed System Memory:

System BIOS Version:
KBC/EC BIOS Version:

LAN MAC Address:
Serial Number:

F1 Help ↑↓ Select Item -/+ Change Values F9 Setup Defaults
Esc Exit ←→ Select Menu Enter Select X Sub-Menu F10 Save and Exit

100

[FUJITSU MHV2080BH-(PM)80026MB

[16:33:08]

16

[01/12/2009]

Intel(R)Core(TM)2 Duo CPU U9400@1.40GHz
1024 MB

R1.01
R1.03

00-22-20-01-61-90
xxxxxxxxxx

The BIOS Setup Utility screen can be divided into four areas:

z On the top is the menu bar containing the titles of the available menus.

Each menu title brings a specific menu.

z The left column of the menu displays the menu items.

z The right column of the menu provides more detailed information when

a menu item is highlighted.

z The bottom of the menu provides keyboard instructions for moving

around and making selections.

Moving Around and Making Selections

You must go through two or three levels to complete the setting for an
item. In most cases, there are two levels: menu title and submenu.

Use the keyboard to move around and make selections. Keyboard
information can be found at the bottom of the screen. A brief description of
keyboard usage is listed next:

Using BIOS Setup and System Recovery 5-3

Key

Function

 , 

Selects a menu title.

 , 

Selects an item or option.

+ / –

Changes the value.

Enter

1) Brings up the sub-menu when available.

2) Opens or closes the option window when an item is
selected.

Esc

1) Exits BIOS Setup Utility.

2) Closes the option window if one is open.

F1

Provides help information.

F9

Loads setup defaults.

F10

Saves and exit the BIOS Setup Utility.

V

Main Menu

The Main menu contains the system date and time settings as well as shows
the basic configuration of the system.

Main Advanced Security Boot Exit

Model:

SATA Port 1

System Time:

System Date:

Processor Info:
Installed System Memory:

System BIOS Version:
KBC/EC BIOS Version:

LAN MAC Address:
Serial Number:

F1 Help ↑↓ Select Item -/+ Change Values F9 Setup Defaults
Esc Exit ←→ Select Menu Enter Select X Sub-Menu F10 Save and Exit

System Time sets the system time.

100

[FUJITSU MHV2080BH-(PM)80026MB

[16:33:08]

16

[01/12/2009]

Intel(R)Core(TM)2 Duo CPU U9400@1.40GHz
1024 MB

R1.01
R1.03

00-22-20-01-61-90
xxxxxxxxxx

System Date sets the system date.

Using BIOS Setup and System Recovery 5-5

A

Advanced Menu

The Advanced menu contains the advanced settings as shown next.

Main Advanced Security Boot Exit

SATA Mode Selection:

Digitizer Type:
Serial port COM1:
Serial port COM2:
Serial port COM4:

Boot-time Diagnostic Screen:

F1 Help ↑↓ Select Item -/+ Change Values F9 Setup Defaults
Esc Exit ←→ Select Menu Enter Select X Sub-Menu F10 Save and Exit

SATA Mode Selection sets the mode to enhanced

IDE

Controller Interface) or

. Turbo memory feature works only when the

SATA AHCI mode is enabled.

[AHCI]

HCI

[AIP1040]
[Enabled]
[Enabled]
[Enabled]

[Disabled]

Item Specific Help

Determines how SATA
controller(s) operate.

NOTE: Turbo memory
function need to enable
SATA AHCI mode. If not
Turbo memory does NOT
have function.

AHCI

(Advanced Host

Digitizer Type or TouchScreen (actual item shown depends on your model)

Digitizer Type allows you to select the type of digitizer you are using.

TouchScreen allows you to unconditionally disable it when set at

Disabled

.

Serial Port COM1/COM2/COM4 allows you to unconditionally disable it
when set at

Disabled

.

Boot-time Diagnostic Screen allows you to display the diagnostic screen
during system boot-up.

Using BIOS Setup and System Recovery

5-6

Main

Advanced

Security

Boot

Exit

Supervisor Password Is:
User Password Is:

Set Supervisor Password:

Set User Password

Password on boot:

TPM Support

Current TPM State

Change TPM State

Set
Clear

[Enter]
[Enter]

[Disabled]

[Eabled]

UNKNOWN

[Enable & Activated]

Item Specific Help

Supervisor Password
controls access to the
setup utility.

F1 Help ↑↓ Select Item -/+ Change Values F9 Setup Defaults
Esc Exit ←→ Select Menu Enter Select  Sub-Menu F10 Save and Exit

Enter

Security Menu

The Security menu contains the security settings, which safeguard your
system against unauthorized use.

Supervisor/User Password Is shows whether you have set the
supervisor/user password or not for the system.

Set Supervisor/User Password sets the supervisor/user password. When
typing the password, first make sure that Num Lock is off, and then type the
password in the entry fields and press Enter. Confirm your password by
typing it again and pressing Enter. You can set the supervisor/user password
to be required for starting up the system and/or entering SCU.





Password on Boot allows you to enable or disable the entering of password
for booting up your system. Once the password is successfully set and this
item is enabled, it is required for booting up the system.

TPM Support enables or disables TPM (Trusted Platform Module) support.
The TPM is a component on your computer’s mainboard that is specifically
designed to enhance platform security above-and-beyond the capabilities of
today’s software by providing a protected space for key operations and
other security critical tasks. Using both hardware and software, TPM protects
encryption and signature keys at their most vulnerable stages – operations
when the keys are being used unencrypted in plain-text form. TPM is
specifically designed to shield unencrypted keys and platform authentication
information from software-based attacks.



 Current TPM State Change TPM State

TPM Support

Current TPM State shows the current TPM state.

Change TPM State allows you to select between

Deactivate & Disable

, and

Enable & Activate

.

No Change, Clear

,

Main

Advanced

Security

Boot

Exit

Boot priority order:

1: USB FDC:

2: SATA HDD:
3: USB KEY:
4: USB CDROM:
5: USB HDD:
6: PCI BEV: IBA GE Slot 00C8 v1300
7:
8:

Excluded from boor order:
: Other USB:
: PCI:
: UNKNOWN:

Item Specific Help

Keys used to view or
configure devices:
Up and Down arrows
select a device.
<+> and <-> moves the
device up or down.
<x> exclude or include
the device to boot.
<Shift + 1> enables or
disables a device.
<1 – 4> Loads default
boot sequence.

F1 Help ↑↓ Select Item -/+ Change Values F9 Setup Defaults

Esc Exit ←→ Select Menu Enter Select  Sub-Menu F10 Save and Exit

Key

Function

 , 

Selects (highlight) a boot device.

+, –

Changes the boot sequence.

1 to 4

Loads the default boot sequence.

X

Moves the highlighted boot device from the “Boot priority
order” list to the “Excluded from boot order” list, and vice versa.

Shift+1

Deactivates/activates the highlighted boot device on the “Boot
priority order” list. When a device has been deactivated, an “ ”
(exclamation) symbol appears beside the item and system will
bypass it when detecting boot device during POST.

Boot Menu

The Boot menu sets the sequence of the devices to be searched for the
operating system.

The bootable devices will be automatically detected during POST and shown
here, allowing you to set the sequence that the BIOS uses to look for a device
from which to load the OS. Below is a brief description of keyboard usage:

Main

Advanced

Security

Boot

Exit

Exit Saving Changes

Exit Discarding Changes

Load Setup Defaults

Discard Changes

Save Changes

Item Specific Help

Exit System Setup and
save your changes to
CMOS.

F1 Help ↑↓ Select Item -/+ Change Values F9 Setup Defaults

Esc Exit ←→ Select Menu Enter Select  Sub-Menu F10 Save and Exit

Exit Menu

The Exit menu displays ways of exiting BIOS Setup Utility. After finishing
with your settings, you must save and exit so that the changes can take
effect.

Exit Saving Changes saves the changes you have made and exits BIOS Setup
Utility.

Exit Discarding Changes exits BIOS Setup Utility without saving the changes
you have made.

Load Setup Defaults loads the factory default values for all the items.

Discard Changes restores the previous values for all the items.

Saves Changes saves the changes you have made.