Page 1
3
. Notes and Precautions
z You must connect the AC adapter for full I/O functionality.
z DO NOT touch the connectors of the Office Dock.
z DO NOT attempt to make connections if there is any object between the
computer and the Office Dock. Doing so could damage the computer and
the Office Dock.
z DO NOT attempt to move the Office Dock when it is connected to the
computer.
z If the computer malfunctions while the Office Dock is connected, turn off
the computer and disconnect the Office Dock. Connect the AC adapter to
the computer and check to see if the computer operates normally. If the
computer operates normally, the Office Dock may be malfunctioning.
z DO NOT place metal objects or containers of liquid on top of the Office
Dock. If paper clips, coins, or other metal objects, or water, or other
liquid spills, get inside the Office Dock, fire or electric shock may result.
Immediately unplug the power cable and remove the computer from the
Office Dock.
z Unplug the power cord and remove the computer from the Office Dock
if any of the following malfunctions occur:
– the Office Dock is damaged
– smoke is emitted
– an unusual smell is emitted
– the Office Dock is unusually hot
Continuing to use the Office Dock while any of the above conditions are
present may result in fire or electric shock.
Rugged Mobile Computing Solutions
S400
OFFICE DOCK
OPERATION GUIDE
561583310001 R00
Page 2
1
. Introduction
The Office Dock makes your S400 a desktop computer. With peripheral
devices such as the keyboard, mouse, monitor, and printer all connected to
the Office Dock, you have a handy work area on your desk. There are no
hassles of disconnecting or connecting the various cables whenever you
have to carry S400 between your desk and elsewhere.
2
. Installation
1. Connect the AC adapter to the Office Dock. The power indicator on your
Office Dock will light up.
2. Disconnect all cables from your S400 and turn off the power.
3. Slide and open the docking connector cover on the bottom of S400.
4. Align S400 with the alignment mark and guide pins on the Office Dock
and put down S400 on the dock.
5. Connect the cables of your peripheral devices to the corresponding
connectors on your Office Dock.
Power Connector
VGA Port
LAN (RJ-45) Port
Audio Output
Connector
Microphone
Connector
RS232 Serial Ports
Docking Connector
Guide Pin
Alignment Mark
Guide Pin
Kensington
Lock
USB Ports
Parallel Port
PS2 Mouse Connector
PS2 Keyboard Connector
USB Port
DVI-D Port
eSATA/USB
Combo Port
Power Indicator
DisplayPort
Loading...