Geovision GV-VD1500 User Manual

GV-IPCam H.264

Hardware Manual

Vandal Proof IP Dome Target Vandal Proof IP Dome

Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use.

ICH264TG2V10

Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of GeoVision.

Every effort has been made to ensure that the information in this manual is accurate. GeoVision, Inc. makes no expressed or implied warranty of any kind and assumes no responsibility for errors or omissions. No liability is assumed for incidental or consequential damages arising from the use of the information or products contained herein. Features and specifications are subject to change without notice. Note: no memory card slot or local

storage function for Argentina.

GeoVision, Inc. 9F, No. 246, Sec. 1, Neihu Rd., Neihu District, Taipei, Taiwan Tel: +886-2-8797-8377 Fax: +886-2-8797-8335 http://www.geovision.com.tw

Trademarks used in this manual: GeoVision, the GeoVision logo and GV series products are trademarks of GeoVision, Inc. Windows and Windows XP are registered trademarks of Microsoft Corporation.

September 2015

Content

Content ................................................................................i

Options .............................................................................. iii

Note for Adjusting Focus and Zoom...............................

Note for Installing Camera Outdoor...............................

Chapter 1 Vandal Proof IP Dome (Part I) ........................

1.1 Packing List..............................................................................

1.2 Features...................................................................................

1.3 Overview ..................................................................................

1.4 Installation................................................................................

1.4.1 Hard-Ceiling Mount......................................................

1.4.2 In-Ceiling Mount.........................................................

1.5 Connecting the Camera..........................................................

1.5.1 Wire Definition ...........................................................

1.5.2 Power Connection......................................................

1.5.3 Voltage Load Expansion (Optional)............................

1.6 Loading Factory Default..........................................................

Chapter 2 Vandal Proof IP Dome (Part II) .....................

2.1 Packing List............................................................................

2.2 Features.................................................................................

18 20 21

25 28

3 4 6 8

2.3 Overview ................................................................................

2.4 Installation.............................................................................. 32

2.4.1 Installation of Weatherproof Shield.............................

2.5 Connecting the Camera..........................................................

2.5.1 Power Connection......................................................

2.5.2 I/O Device Connections .............................................

2.6 Loading Factory Default..........................................................

Chapter 3 Target Vandal Proof IP Dome.......................

3.1 Packing List............................................................................

3.2 Features.................................................................................

3.3 Overview ................................................................................

3.4 Installation..............................................................................

3.5 Connecting the Camera..........................................................

3.6 Loading Factory Default..........................................................

45 45

49 52 54 56 67 68

Options

Optional devices can expand your camera’s capabilities and versatility. Contact your dealer for more information.

Device Description

The power adapter is available for all Vandal Proof

Power Adapter

GV-PA191 PoE Adapter

GV-POE Switch

GV-Mount Accessories

IP Dome. Contact your sales representative for the countries and areas supported.

The GV-PA191 PoE adapter is designed to provide power and network connection to the cameras over a single Ethernet cable.

The GV-POE Switch is designed to provide power along with network connection for IP devices. The GV-POE Switch is available in various models with different numbers and types of ports.

The GV-Mount Accessories provide a comprehensive lineup of accessories for installation on ceiling, wall corner and pole. For details, see GV- Mount Accessories Installation Guide on the Software DVD.

iii

Device Description

The GV-Relay V2 is designed to expand the voltage load of GV IP devices. It provides 4 relay outputs,

GV-Relay V2

Metal PG21 Conduit Connector

Weatherproof Shield

and each can be set as normally open (NO) or normally closed (NC) independently as per your requirement.

The metal PG21 conduit connector is used for running the wires of GV-VD1530 / 2430 / 2530 / 3430, GV-VD1540 / 2440 / 2540 / 3440 / 5340 and GV-VD2540-E / 5340-E and GV-EVD2100 / 3100 through a 3/4” conduit pipe.

The weatherproof shield is made for GV-VD1530 / 2430 / 2530 / 3430, GV-VD1540 / 2440 / 2540 / 3440 / 5340, and GV-VD2540-E / 5340-E to protect the camera from rain and snow.

Note for Adjusting Focus and Zoom

When adjusting the Focus and Zoom Screws, do not over tighten the Focus and Zoom screws. The screws only need to be as tight as your finger can do it. It is not necessary to use any tools to get them tighter. Doing so can damage the structure of lens.

The maximum torque value for all the zoom and focus screws is 0.049 N.m

Note for Installing Camera Outdoor

When installing the camera outdoor, be sure that:

1. The camera is set up above the junction box to prevent water from entering the camera along the cables.

2. Any PoE, power, audio and I/O cables are waterproofed using waterproof silicon rubber or the like.

3. After opening the camera cover, ensure the screws are tightened and the cover is in place.

4. The silica gel bag loses its effectiveness when the dry camera is opened. To prevent the lens from fogging up, replace the silica gel bag every time you open the camera, and conceal the gel bag in camera within 2 minutes of exposing to open air.

vii

Vandal Proof IP Dome (Part I)

Chapter 1 Vandal Proof IP Dome (Part I)

The Vandal Proof IP Dome is a series of outdoor camera designed for vandal protection. They are equipped with automatic infrared cut filters and IR LED for day and night surveillance. The WDR Pr o models can produce clear image for scenes containing contrasting intensity of lights. The super low lux models can display color live view in near darkness. For related models, see 1.2 Features.

These Vandal Proof IP Domes can be installed on wall and ceiling using the standard package. They can also be installed on wall corners and poles using the GV-Mount accessories (optional). For more details, see GV-Mount Accessories Installation Guide on the Software DVD.

Model No. Specification Description GV-VD120D

(IK10+, Transparent Cover)

GV-VD121D

(IK10+, Smoked Cover)

GV-VD122D

(IK7, Trans parent Cover)

GV-VD123D

(IK7, Smoked Cover)

Varifocal Lens

Auto Iris, f:3 ~ 9 mm, F/1.3, 1/2.7” ø 14 mm lens mount

1.3 MP Low Lux, H.264, Vandal Proof IP Dome

Model No. Specification Description GV-VD220D

(IK10+, Transparent Cover)

GV-VD221D

(IK10+, Smoked Cover)

GV-VD222D

(IK7, Trans parent Cover)

GV-VD223D

(IK7, Smoked Cover)

GV-VD320D

(IK10+, Transparent Cover)

GV-VD321D

(IK10+, Smoked Cover)

GV-VD322D

(IK7, Trans parent Cover)

GV-VD323D

(IK7, Smoked Cover)

GV-VD1500

(IK10+, Transparent Cover)

GV-VD2500

(IK10+, Transparent Cover)

GV-VD2400

(IK10+, Transparent Cover)

GV-VD3400

(IK10+, Transparent Cover)

Varifocal Lens

Auto Iris, f:3 ~ 9 mm, F/1.3, 1/2.7” ø 14 mm lens mount

Auto Iris, f:3 ~ 9 mm, F/1.2, 1/2.7” ø 14 mm lens mount

2 MP, H.264, Vandal Proof IP Dome

3 MP, H.264, Vandal Proof IP Dome

1.3 MP / 2 MP Super Low Lux, Vandal Proof IP Dome

2 MP / 3 MP, H.264, WDR Pro, Vandal Proof IP Dome

Vandal Proof IP Dome (Part I)

1.1 Packing List

 Vandal Proof IP Dome  Silica Gel Bag x 2  Screw Anchor x 4

 Ceiling Screw x 4

 T-Cap Screw x 3

 T-Cap x 3

 Focus Adjustment Cap

 GV-NVR Software DVD  GV-IPCAM H.264 Software

 Warranty Card

Note:

1. Focus Adjustment Cap is only needed and supplied for IK10+ models.

2. The power adapter can be excluded upon request.

 Torx Wrench

 Blue Screw x 3

 Small Screw Cap x 3

 Plastic Clip x 3

 2-Pin Terminal Block  Power Adapter

DVD

1.2 Features

 Image sensor

Camera Model Image Sensor

GV-VD120D / 121D / 122D / 123D

GV-VD1500

1/3" progressive scan low lux CMOS

1/3’’ progressive scan super low lux CMOS

GV-VD2500

GV-VD2400 / 3400 1/3.2" progressive scan CMOS GV-VD220D / 221D / 222D /

223D GV-VD320D / 321D / 322D /

323D

 Dual streams from H.264 or MJPEG  Frame rate

Camera Model Frame Rate

GV-VD120D / 121D / 122D / 123D / 1500

GV-VD220D / 221D / 222D / 223D / 2400 / 2500

GV-VD320D / 321D / 322D / 323D / 3400

 Day and night function (with removable IR-cut filter)  Wide Dynamic Range Pro (for GV-VD2400 / 3400 only)  Defog  Intelligent IR  Vandal resistance (IK10+ and IK7)  Ingress protection (IP67 rating)

1/2.8’’ progressive scan super low lux CMOS

1/2.5’’ progressive scan CMOS

Up to 30 fps at 1280 x 1024

Up to 30 fps at 1920 x 1080

Up to 20 fps at 2048 x 1536

Vandal Proof IP Dome (Part I)



3-axis mechanism (pan / tilt / roll)

 Micro SD card slot (SD/SDHC) for local storage  NAS recording  Recording assigned by GV-Edge Recording Manager (Windows &

Mac)

 One sensor input and alarm output  TV-out support  Two-way audio  3D noise reduction (for GV-VD1500 / 2500)  2D noise reduction (except for GV-VD1500 / 2500)  Motion detection  Tampering alarm  Visual automation  Text overlay  Privacy mask  IP address filtering  DC 12V / AC 24V / PoE (IEEE 802.3af)  Megapixel lens  Support for iPhone, iPad, Android and 3GPP  31 languages on Web interface  ONVIF (Profile S) conformant

1.3 Overview

4 5

6 7 8 9 7

10 11

Figure 1-1

No. Name Description

1 Power LED

2 Status LED

3 Default Button

Memory Card

Slot Thread Lock Locks the housing cover to the camera body

5 6 Pan Disc Loosens to pan the camera.

7 Tilt Screw Loosen the screw to tilt the camera.

Turns on (green) when the power is on and turns off when there is no power supply.

Turns on (green) when the system operates normally and turns off when system error occurs.

Resets the camera to factory default. For details, see 1.6 Loading Factory Default.

Inserts a micro SD ca r d (SD/SDHC , ve r sion

2.0 only, Class 10) to store recording data.

to prevent the cover from falling.

Vandal Proof IP Dome (Part I)

No. Name Description

8 Rotational Screw Loosens to adjust the camera angle.

9 Zoom Screw Adjus ts the zoom of the camera. 10 Focus Screw Adjusts the focus of the camera. 11 Silica Gel Bag Absorbs moisture in the camera body.

1.4 Installation

The Vandal Proof IP Dome is designed for outdoors. With the standard package, there are two ways to install the Vandal Proof IP Dome:

ceiling mount

Note: You can also install the camera:

and in-ceilin g mount.

 on a power box (of the 4" square and double gang type) using the

standard package

 to ceilings, wall corners (concave or convex), and poles using

optional mounting kits

For details on these installations, see GV-Mount Accessories Installation Guide on the Software DVD.

hard-

Vandal Proof IP Dome (Part I)

1.4.1 Hard-Ceiling Mount

Figure 1-2

1. Unpack the camera package and take out the camera body.

Unscrew the housing cover

Unscrew thread lock

Unscrew the inner housing

Take out the camera body

Vandal Proof IP Dome (Part I)

2. Mark the position of four screw holes on the desired installation location, and drill holes in the marked locations. Drill the ellipse part if you wish to put the wires through it.

3. Insert the screw anch o r s to th e 4 ho le s on the ce ilin g.

4. Secure the back cover to the ceiling with 4 ceiling screws.

Figure 1-3

5. Refer to step 1 to secure the camera body with inner housing.

6. Thread the cable through the conduit entry at the side of the back cover. Alternatively pass the wires through the ellipse hole at the bottom of the back cover.

Figure 1-4

7. Connect the network, power and other cables to the camera. See 1.5 Connecting the Camera.

8. Access the live view. See 2.1 Accessing the Live View, GV-IPCam H.264 Firmware Manual.

9. Based on the live view, adjust the camera to a desired angle as illustrated below.

Tip: The 3-axis mechanism offers flexible and easy installation.

Pan Adjustment

Figure 1-5

ilt Adjustment

Vandal Proof IP Dome (Part I)

Rotational Adjustment

Figure 1-6

10. Adjust image clarity using the GV-IP Device Utility program. For details, see 2.2 Adjusting Image Clarity, GV-IPCam H.264 Firmware Manual.

11. Screw on the thread lock as shown in step 1.

12. Replace the silica gel bag on the cam era body withi n 2 minutes of opening the silica gel bag package.

13. Secure the housing cover to the camera body as shown in step 1.

Figure 1-7

Note: Adjust the black mask inside the housing cover to make sure the

camera view is not obscured.

IMPORTANT:

1. The gel bag loses its effectiveness when the dry camera is opened. To prevent the lens from fogging up, replace the silica gel bag every time you open the camera and conceal the silica gel bag within 2 minutes of exposing to open air.

2. Make sure the housing cover is properly secured to prevent water from entering and damaging the inner housing.

+ 54 hidden pages