Geovision GV-IO 12-Out Card V3 User Manual

GV-IO 12-Out Card V3

With 12 relay outputs, the GV-IO 12-Out Card is designed to work with GV-NET/IO
Card to provide an interf ace for your external devices such as alarms and gates.

Specifications

Relay Output

12

Installation

Insert the GV-IO 12-Out Card to an empty card slot. Connect the 20-Pin Ribbon
Cable to the GV Video Capture Card, the GV-IO 12-In Card, and the GV-NET/IO
Card as shown below.

Packing List

1

GV-IO 12-Out Card x 1

2

20-pin Ribbon Cable with 4 Connectors ) x 1

3

4-Pin to 4-Pin Mini Power Cable x 1

4

Installation Guide x 1

Relay Out 5
Relay Out 6
Relay Out 7
Relay Out 8
Com

Relay Out 9
Relay Out 10
Relay Out 11
Relay Out 12
Com

Relay Out 13
Relay Out 14
Relay Out 15
Relay Out 16
Com

1

GV-IO 12-Out Card

4-pin to 4-p in

3

Mini Power Cable

Connect to
GV-NET/IO Card and
GV-IO 12-In Card

Relay Status

Output

Normal Open
USB

Connection

30V DC, 3A

Relay Capacitance

DC IN

Environmental Conditions

Compatible Car d

RS-232
Connection

DC 5V, 1A
0~50 degree C / 32~122 Degree F

5%~95% (non-condensing)
All GV Video Capture Cards

125 / 250V AC, 3A

Models
Dimensions (W x H) 120 x 99 mm / 4.72 x 3.9 in

Note:

1. To prevent the noise interference in I/O operation, tightly screw the GV-IO
12-Out Card to the PC case.

2. The GV-IO 12-Out Card must work with the GV-NET/IO Card together.

GV Video Capture Card

2

20-pin Ribbon Cable

2013.12.23