General Machine Products Weave-1 User Manual

Lacing Instructions for
Double Weave-Double Flexible Eye Lace Up Grip

Single weave grips should be laced with
single strand lacing.

Double weave grips should be laced with
double strand lacing.

Start lacing at the lead or anchoring end
of the grip. Thread the lacing through the
first two loops of the split and
until the laces are centered at this point.

Lace as you would your shoe, crossing
the laces before lacing the next two
loops.

Do not pull the lacing too tight. Leave a
space between adjoining loops approxi­mately equal to the width of one diamond
of mesh.

Next twist the lacing strands tightly to­gether at the tail end of the grip.

Finally, wrap the ends of the lacing once
or twice around the tail
twisting the ends together securely.

Any excess lace can now be cut off.

of the grip tightly,

pull through

General Machine Products Co. 3111 Old Lincoln Highway Trevose, PA 19053 USA

Tel: [phone] Fax: [phone] Email: info@GMPtools.