General Machine Products 15326 B User Manual
B ladder Platform Seat Replacement
B ladder Platform Seat Replacement
QTY Part Number Description
1 24646 Seat
2 09758 1/4-20x1 (a)
4 16195 1/4-20x1 1/4 (b)
STEP 1
Remove damaged seat and related hardware.
Inspect the platform carefully and look for
unsatisfactory conditions such as:
Defective hardware such as spring latches that
do not operate properly
2 16194 1/4-20x1 1/2 (c)
8 17657 Lock Washer
Excessive wear such as a damaged or broken
weld or bent pipe
8 05024 1/4x20 Sq Nut
3 Warning Labels
If reliability or safety is questionable, be safe and
dispose of properly and purchase a new ladder
platform, GMP # 15326
STEP 2
Raise the seat on 2 wooden blocks,
tread side up, with the 2 holes in the
center closest to you. Start screws in
AERIAL TOOLS
the holes as illustrated in photo.
See the manual on the Ladder Platform for
additional important information
P/N 32165
07/22/2010
c c
b
b
STEP 4
Turn seat over and place
back on wood blocks. Install bracket and latch
assembly. Fasten with
lock washers, nuts and
tighten to 50 inch
pounds.
3111 Old Lincoln Highway, Trevose, PA 19053 USA • 215.357.5500 • 215.357.6216 (Fax) • info@GMPtools.com • www GMPtools.com
b
a
b
a
STEP 5
Install frame assembly
and fasten with lock
washers, nuts and
tighten to 50 inch
pounds.
STEP 3
Tap screws flush with a
hammer sinking square
under head into wood.
STEP 6
Round over threads with
a ball peen hammer on all
bolts to prevent the nuts
from backing off during
use.
Loading...