GE HLU Powerflood, VLU Powerflood Instructions Manual
GE
GEH-3851C
g
Lighting Solutions
HLU, VLU Powerflood® Floodlight
READ THOROUGHLY BEFORE INSTALLING
Trunnion Mounted
(Standard)
SCREW B
BOLT A
Slipfitter Mounted
(Options K or S)
INSTRUCTIONS
Wall Mounted
(Option V)
HLUF
BOLT A
VLUF
WARNING
Risk of electric shock
• Turn power off before servicing
– see instructions
GENERAL
This luminaire is designed for outdoor lighting applications, and should not be used in areas of limited
ventilation or in high ambient temperature enclosures. Best
results will be obtained if installed and maintained
according to the following recommendations.
UNPACKING
This luminaire has been properly packed so that no
parts should have been damaged during transit. Inspect to
confirm.
MOUNTING
CAUTION
Unit will fall if not installed properly
• Follow installation instructions
This floodlight is provided with either trunnion mounting, pipe mounting, or wall mounting means.
TRUNNION MOUNTED UNITS — Mounted directly on a
flat surface. Mounting adapters are available for installation on poles, crossarms, pipes, etc. The trunnion bracket
has a clearance hole for a 3/4-inch bolt used for attachment to such mountings. The 0.562-inch holes on either
side permit additional anchoring, where required. Tighten
side trunnion bolts to 18 - 22 foot pounds.
PIPE MOUNTED UNITS — The slipfitter can be
mounted on 1-7/8-inch O.D. through 2-3/8-inch O.D. or
2-7/8-inch O.D. through 3-inch O.D. pipes. Three set
screws are used to clamp the floodlight securely to the pipe.
Tighten set screws to 18 - 22 foot pounds.
WALL MOUNTED UNITS - The wall mounting plate is
provided with four (4) 0.438-inch clearance holes spaced
4.375(H)x2.875(V) inches for mounting.
AIMING
Slightly loosen bolt "A" (two on trunnion, one on
slipfitter), tilt luminaire to desired position, and retighten
bolts. Both trunnions and slipfitters have vertical degree
scales which permit setting the floodlight at a selected
These instructions do not purport to cover all details or variations in equipment nor to provide for every possible contingency to be met in connection with installation, operation or
maintenance. Should further information be desired or should particular problems arise which are not covered sufficiently for the purchaser’s purposes, the matter should be referred
to GE Lighting Solutions.
Loading...