GE Vivid P3 User manual

Technical
Publication

Direction 5344303-100
Revision 2

GE Healthcare

GE Healthcare

Vivid™P3 Service Manual

Copyright© 2009 by General Electric Company Inc.
All Rights Reserved

This page was intentionally left blank.

GE HEALTHCARE PROPRIETARY TO GE
D

IRECTION 5344303-100, REVISION 2 VIVID P3 SERVICE MANUAL

Important Precautions

• THIS SERVICE MANUAL IS AVAILABLE IN ENGLISH ONLY.

• IF A CUSTOMER’S SERVICE PROVIDER REQUIRES A LANGUAGE OTHER THAN
ENGLISH, IT IS THE CUSTOMER’S RESPONSIBILITY TO PROVIDE
TRANSLATION SERVICES.

WARNING

AVERTISSEMENT

• DO NOT ATTEMPT TO SERVICE THE EQUIPMENT UNLESS THIS SERVICE
MANUAL HAS BEEN CONSULTED AND IS UNDERSTOOD.

• FAILURE TO HEED THIS WARNING MAY RESULT IN INJURY TO THE SERVICE
PROVIDER, OPERATOR OR PATIENT FROM ELECTRIC SHOCK, MECHANICAL
OR OTHER HAZARDS.

• CE MANUEL DE MAINTENANCE N’EST DISPONIBLE QU’EN ANGLAIS.

• SI LE PRESTATAIRE DE SERVICES DU CLIENT A BESOIN DE CE MANUEL DANS
UNE AUTRE LANGUE QUE L’ANGLAIS, IL INCOMBE AU CLIENT DE LE FAIRE
TRADUIRE.

• NE PAS TENTER D’INTERVENTION SUR LES ÉQUIPEMENTS TANT QUE LE
MANUEL DE MAINTENANCE N’A PAS ÉTÉ CONSULTÉ ET COMPRIS.

• LE NON-RESPECT DE CET AVERTISSEMENT PEUT ENTRAÎNER CHEZ LE
TECHNICIEN, L’OPÉRATEUR OU LE PATIENT DES BLESSURES DUES À DES
DANGERS ÉLECTRIQUES, MÉCANIQUES OU AUTRES.

WARNUNG

• DIESES KUNDENDIENST-HANDBUCH EXISTIERT NUR IN ENGLISCHER
SPRACHE.

• FALLS EIN FREMDER KUNDENDIENST EINE ANDERE SPRACHE BENÖTIGT, IST
ES AUFGABE DES KUNDEN, FÜR EINE ENTSPRECHENDE ÜBERSETZUNG ZU
SORGEN.

• WARTEN SIE DIESES GERÄT NUR, WENN SIE DIE ENTSPRECHENDEN
ANWEISUNGEN IM KUNDENDIENST-HANDBUCH GELESEN HABEN UND
NACHVOLLZIEHEN KÖNNEN.

• WIRD DIESE WARNUNG NICHT BEACHTET, SO KANN ES ZU VERLETZUNGEN
DES KUNDENDIENSTTECHNIKERS, DES BEDIENERS ODER DES PATIENTEN
DURCH ELEKTRISCHE SCHLÄGE, MECHANISCHE ODER SONSTIGE
GEFAHREN KOMMEN.

i

GE HEALTHCARE PROPRIETARY TO GE
D

IRECTION 5344303-100, REVISION 2 VIVID P3 SERVICE MANUAL

• ESTE MANUAL DE SERVICIO SÓLO ESTÁ DISPONIBLE EN INGLÉS.

• SI ALGÚN PROVEEDOR DE SERVICIOS AJENO A GEMS SOLICITA UN IDIOMA
QUE NO SEA EL INGLÉS, LA TRADUCCIÓN ES RESPONSABILIDAD DEL
CLIENTE.

• NO SE DEBERÁ DAR SERVICIO TÉCNICO AL EQUIPO SIN HABER

AVISO

CONSULTADO Y COMPRENDIDO ESTE MANUAL DE SERVICIO.

• LA NO OBSERVANCIA DEL PRESENTE AVISO PUEDE DAR LUGAR A QUE EL
PROVEEDOR DE SERVICIOS, EL USUARIO O EL PACIENTE SUFRAN LESIONES
PROVOCADAS POR DESCARGAS ELÉCTRICAS, PROBLEMAS MECÁNICOS O
PELIGROS DE OTRA NATURALEZA.

• ESTE MANUAL DE ASSISTÊNCIA TÉCNICA SÓ SE ENCONTRA DISPONÍVEL EM
INGLÊS.

• SE QUALQUER OUTRO SERVIÇO DE ASSISTÊNCIA TÉCNICA, QUE NÃO A
GEMS, SOLICITAR ESTES MANUAIS NOUTRO IDIOMA, É DA
RESPONSABILIDADE DO CLIENTE FORNECER OS SERVIÇOS DE TRADUÇÃO.

ATENÇÃO

• NÃO TENTE REPARAR O EQUIPAMENTO SEM TER CONSULTADO E
COMPREENDIDO ESTE MANUAL DE ASSISTÊNCIA TÉCNICA.

• O NÃO CUMPRIMENTO DESTE AVISO PODE PÔR EM PERIGO A SEGURANÇA
DO TÉCNICO, OPERADOR OU PACIENTE DEVIDO A CHOQUES ELÉTRICOS,
MECÂNICOS OU OUTROS.

AVVERTENZA

HOIATUS

• IL PRESENTE MANUALE DI MANUTENZIONE È DISPONIBILE SOLTANTO IN
INGLESE.

• SE UN ADDETTO ALLA MANUTENZIONE ESTERNO ALLA GEMS RICHIEDE IL
MANUALE IN UNA LINGUA DIVERSA, IL CLIENTE È TENUTO A PROVVEDERE
DIRETTAMENTE ALLA TRADUZIONE.

• SI PROCEDA ALLA MANUTENZIONE DELL’APPARECCHIATURA SOLO DOPO
AVER CONSULTATO IL PRESENTE MANUALE ED AVERNE COMPRESO IL
CONTENUTO.

• NON TENERE CONTO DELLA PRESENTE AVVERTENZA POTREBBE FAR
COMPIERE OPERAZIONI DA CUI DERIVINO LESIONI ALL’ADDETTO ALLA
MANUTENZIONE, ALL’UTILIZZATORE ED AL PAZIENTE PER FOLGORAZIONE
ELETTRICA, PER URTI MECCANICI OD ALTRI RISCHI.

• KÄESOLEV TEENINDUSJUHEND ON SAADAVAL AINULT INGLISE KEELES.

• KUI KLIENDITEENINDUSE OSUTAJA NÕUAB JUHENDIT INGLISE KEELEST
ERINEVAS KEELES, VASTUTAB KLIENT TÕLKETEENUSE OSUTAMISE EEST.

• ÄRGE ÜRITAGE SEADMEID TEENINDADA ENNE EELNEVALT KÄESOLEVA
TEENINDUSJUHENDIGA TUTVUMIST JA SELLEST ARU SAAMIST.

• KÄESOLEVA HOIATUSE EIRAMINE VÕIB PÕHJUSTADA TEENUSEOSUTAJA,
OPERAATORI VÕI PATSIENDI VIGASTAMIST ELEKTRILÖÖGI, MEHAANILISE
VÕI MUU OHU TAGAJÄRJEL.

ii -

GE HEALTHCARE PROPRIETARY TO GE
D

IRECTION 5344303-100, REVISION 2 VIVID P3 SERVICE MANUAL

• TÄMÄ HUOLTO-OHJE ON SAATAVILLA VAIN ENGLANNIKSI.

• JOS ASIAKKAAN PALVELUNTARJOAJA VAATII MUUTA KUIN
ENGLANNINKIELISTÄ MATERIAALIA, TARVITTAVAN KÄÄNNÖKSEN
HANKKIMINEN ON ASIAKKAAN VASTUULLA.

• ÄLÄ YRITÄ KORJATA LAITTEISTOA ENNEN KUIN OLET VARMASTI LUKENUT

VAROITUS

JA YMMÄRTÄNYT TÄMÄN HUOLTO-OHJEEN.

• MIKÄLI TÄTÄ VAROITUSTA EI NOUDATETA, SEURAUKSENA VOI OLLA
PALVELUNTARJOAJAN, LAITTEISTON KÄYTTÄJÄN TAI POTILAAN
VAHINGOITTUMINEN SÄHKÖISKUN, MEKAANISEN VIAN TAI MUUN
VAARATILANTEEN VUOKSI.

• ΤΟ ΠΑΡΟΝ ΕΓΧΕΙΡΙ∆ΙΟ ΣΕΡΒΙΣ ∆ΙΑΤΙΘΕΤΑΙ ΣΤΑ ΑΓΓΛΙΚΑ ΜΟΝΟ.

• ΕΑΝ ΤΟ ΑΤΟΜΟ ΠΑΡΟΧΗΣ ΣΕΡΒΙΣ ΕΝΟΣ ΠΕΛΑΤΗ ΑΠΑΙΤΕΙ ΤΟ ΠΑΡΟΝ

ΕΓΧΕΙΡΙ∆ΙΟ ΣΕ ΓΛΩΣΣΑ ΕΚΤΟΣ ΤΩΝ ΑΓΓΛΙΚΩΝ, ΑΠΟΤΕΛΕΙ ΕΥΘΥΝΗ ΤΟΥ
ΠΕΛΑΤΗ ΝΑ ΠΑΡΕΧΕΙ ΥΠΗΡΕΣΙΕΣ ΜΕΤΑΦΡΑΣΗΣ.

• ΜΗΝ ΕΠΙΧΕΙΡΗΣΕΤΕ ΤΗΝ ΕΚΤΕΛΕΣΗ ΕΡΓΑΣΙΩΝ ΣΕΡΒΙΣ ΣΤΟΝ ΕΞΟΠΛΙΣΜΟ

ΠΡΟΕΙ∆ΟΠΟΙΗΣΗ

ΕΚΤΟΣ ΕΑΝ ΕΧΕΤΕ ΣΥΜΒΟΥΛΕΥΤΕΙ

ΚΑΙ ΕΧΕΤΕ ΚΑΤΑΝΟΗΣΕΙ ΤΟ ΠΑΡΟΝ

ΕΓΧΕΙΡΙ∆ΙΟ ΣΕΡΒΙΣ.

• ΕΑΝ ∆Ε ΛΑΒΕΤΕ ΥΠΟΨΗ ΤΗΝ ΠΡΟΕΙ∆ΟΠΟΙΗΣΗ ΑΥΤΗ, ΕΝ∆ΕΧΕΤΑΙ ΝΑ
ΠΡΟΚΛΗΘΕΙ ΤΡΑΥΜΑΤΙΣΜΟΣ ΣΤΟ ΑΤΟΜΟ ΠΑΡΟΧΗΣ ΣΕΡΒΙΣ, ΣΤΟ ΧΕΙΡΙΣΤΗ Ή
ΣΤΟΝ ΑΣΘΕΝΗ ΑΠΟ ΗΛΕΚΤΡΟΠΛΗΞΙΑ, ΜΗΧΑΝΙΚΟΥΣ Ή ΑΛΛΟΥΣ ΚΙΝ∆ΥΝΟΥΣ.

FIGYELMEZTETÉS

VIÐVÖRUN

• EZEN KARBANTARTÁSI KÉZIKÖNYV KIZÁRÓLAG ANGOL NYELVEN ÉRHETŐ
EL.

• HA A VEVŐ SZOLGÁLTATÓJA ANGOLTÓL ELTÉRŐ NYELVRE TART IGÉNYT,
AKKOR A VEVŐ FELELŐSSÉGE A FORDÍTÁS ELKÉSZÍTTETÉSE.

• NE PRÓBÁLJA ELKEZDENI HASZNÁLNI A BERENDEZÉST, AMÍG A
KARBANTARTÁSI KÉZIKÖNYVBEN LEÍRTAKAT NEM ÉRTELMEZTÉK.

• EZEN FIGYELMEZTETÉS FIGYELMEN KÍVÜL HAGYÁSA A SZOLGÁLTATÓ,
MŰKÖDTETŐ VAGY A BETEG ÁRAMÜTÉS, MECHANIKAI VAGY EGYÉB
VESZÉLYHELYZET MIATTI SÉRÜLÉSÉT EREDMÉNYEZHETI.

• ÞESSI ÞJÓNUSTUHANDBÓK ER EINGÖNGU FÁANLEG Á ENSKU.

• EF ÞJÓNUSTUAÐILI VIÐSKIPTAMANNS ÞARFNAST ANNARS TUNGUMÁLS EN
ENSKU, ER ÞAÐ Á ÁBYRGÐ VIÐSKIPTAMANNS AÐ ÚTVEGA ÞÝÐINGU.

• REYNIÐ EKKI AÐ ÞJÓNUSTA TÆKIÐ NEMA EFTIR AÐ HAFA SKOÐAÐ OG SKILIÐ
ÞESSA ÞJÓNUSTUHANDBÓK.

• EF EKKI ER FARIÐ AÐ ÞESSARI VIÐVÖRUN GETUR ÞAÐ VALDIÐ MEIÐSLUM
ÞJÓNUSTUVEITANDA, STJÓRNANDA EÐA SJÚKLINGS VEGNA RAFLOSTS,
VÉLRÆNNAR EÐA ANNARRAR HÆTTU.

iii

GE HEALTHCARE PROPRIETARY TO GE
D

IRECTION 5344303-100, REVISION 2 VIVID P3 SERVICE MANUAL

• TENTO SERVISNÍ NÁVOD EXISTUJE POUZE V ANGLICKÉM JAZYCE.

• V PŘÍPADĚ, ŽE POSKYTOVATEL SLUŽEB ZÁKAZNÍKŮM POTŘEBUJE NÁVOD V
JINÉM JAZYCE, JE ZAJIŠTĚNÍ PŘEKLADU DO ODPOVÍDAJÍCÍHO JAZYKA
ÚKOLEM ZÁKAZNÍKA.

• NEPROVÁDĚJTE ÚDRŽBU TOHOTO ZAŘÍZENÍ, ANIŽ BYSTE SI PŘEČETLI

VÝSTRAHA

TENTO SERVISNÍ NÁVOD A POCHOPILI JEHO OBSAH.

• V PŘÍPADĚ NEDODRŽOVÁNÍ TÉTO VÝSTRAHY MŮŽE DOJÍT ÚRAZU
ELEKTRICKÁM PROUDEM PRACOVNÍKA POSKYTOVATELE SLUŽEB,
OBSLUŽNÉHO PERSONÁLU NEBO PACIENTŮ VLIVEM ELEKTRICKÉHOP
PROUDU, RESPEKTIVE VLIVEM K RIZIKU MECHANICKÉHO POŠKOZENÍ NEBO
JINÉMU RIZIKU.

• DENNE SERVICEMANUAL FINDES KUN PÅ ENGELSK.

• HVIS EN KUNDES TEKNIKER HAR BRUG FOR ET ANDET SPROG END
ENGELSK, ER DET KUNDENS ANSVAR AT SØRGE FOR OVERSÆTTELSE.

• FORSØG IKKE AT SERVICERE UDSTYRET MEDMINDRE

ADVARSEL

DENNE SERVICEMANUAL ER BLEVET LÆST OG FORSTÅET.

• MANGLENDE OVERHOLDELSE AF DENNE ADVARSEL KAN MEDFØRE SKADE
PÅ GRUND AF ELEKTRISK, MEKANISK ELLER ANDEN FARE FOR TEKNIKEREN,
OPERATØREN ELLER PATIENTEN.

WAARSCHUWING

BRĪDINĀJUMS

• DEZE ONDERHOUDSHANDLEIDING IS ENKEL IN HET ENGELS
VERKRIJGBAAR.

• ALS HET ONDERHOUDSPERSONEEL EEN ANDERE TAAL VEREIST, DAN IS DE
KLANT VERANTWOORDELIJK VOOR DE VERTALING ERVAN.

• PROBEER DE APPARATUUR NIET TE ONDERHOUDEN VOORDAT DEZE
ONDERHOUDSHANDLEIDING WERD GERAADPLEEGD EN BEGREPEN IS.

• INDIEN DEZE WAARSCHUWING NIET WORDT OPGEVOLGD, ZOU HET
ONDERHOUDSPERSONEEL, DE OPERATOR OF EEN PATIËNT GEWOND
KUNNEN RAKEN ALS GEVOLG VAN EEN ELEKTRISCHE SCHOK,
MECHANISCHE OF ANDERE GEVAREN.

• ŠĪ APKALPES ROKASGRĀMATA IR PIEEJAMA TIKAI ANGĻU VALODĀ.

• JA KLIENTA APKALPES SNIEDZĒJAM NEPIECIEŠAMA INFORMĀCIJA CITĀ
VALODĀ, NEVIS ANGĻU, KLIENTA PIENĀKUMS IR NODROŠINĀT TULKOŠANU.

• NEVEICIET APRĪKOJUMA APKALPI BEZ APKALPES ROKASGRĀMATAS
IZLASĪŠANAS UN SAPRAŠANAS.

• ŠĪ BRĪDINĀJUMA NEIEVĒROŠANA VAR RADĪT ELEKTRISKĀ

S STRĀVAS
TRIECIENA, MEHĀNISKU VAI CITU RISKU IZRAISĪTU TRAUMU APKALPES
SNIEDZĒJAM, OPERATORAM VAI PACIENTAM.

iv -

GE HEALTHCARE PROPRIETARY TO GE
D

IRECTION 5344303-100, REVISION 2 VIVID P3 SERVICE MANUAL

• ŠIS EKSPLOATAVIMO VADOVAS YRA IŠLEISTAS TIK ANGLŲ KALBA.

• JEI KLIENTO PASLAUGŲ TEIKĖJUI REIKIA VADOVO KITA KALBA – NE ANGLŲ,
VERTIMU PASIRŪPINTI TURI KLIENTAS.

• NEMĖGINKITE ATLIKTI ĮRANGOS TECHNINĖS PRIEŽIŪROS DARBŲ, NEBENT

ĮSPĖJIMAS

VADOVAUTUMĖTĖS ŠIUO EKSPLOATAVIMO VADOVU IR JĮ SUPRASTUMĖTE

• NEPAISANT ŠIO PERSPĖJIMO, PASLAUGŲ TEIKĖJAS, OPERATORIUS AR
PACIENTAS GALI BŪTI SUŽEISTAS DĖL ELEKTROS SMŪGIO, MECHANINIŲ AR
KITŲ PAVOJŲ.

• DENNE SERVICEHÅNDBOKEN FINNES BARE PÅ ENGELSK.

• HVIS KUNDENS SERVICELEVERANDØR TRENGER ET ANNET SPRÅK, ER DET
KUNDENS ANSVAR Å SØRGE FOR OVERSETTELSE.

• IKKE FORSØK Å REPARERE UTSTYRET UTEN AT DENNE

ADVARSEL

SERVICEHÅNDBOKEN ER LEST OG FORSTÅTT.

• MANGLENDE HENSYN TIL DENNE ADVARSELEN KAN FØRE TIL AT
SERVICELEVERANDØREN, OPERATØREN ELLER PASIENTEN SKADES PÅ
GRUNN AV ELEKTRISK STØT, MEKANISKE ELLER ANDRE FARER.

OSTRZEŻENIE

ATE NŢIE

• NINIEJSZY PODRĘCZNIK SERWISOWY DOSTĘPNY JEST JEDYNIE W JĘZYKU
ANGIELSKIM.

• JEŚLI FIRMA ŚWIADCZĄCA KLIENTOWI USłUGI SERWISOWE WYMAGA
UDOSTĘPNIENIA PODRĘCZNIKA W JĘZYKU INNYM NIŻ ANGIELSKI,
OBOWIĄZEK ZAPEWNIENIA STOSOWNEGO TłUMACZENIA SPOCZYWA NA
KLIENCIE.

• NIE PRÓBOWAĆ SERWISOWAĆ

NINIEJSZEGO SPRZĘTU BEZ UPRZEDNIEGO

ZAPOZNANIA SIĘ Z PODRĘCZNIKIEM SERWISOWYM.

• NIEZASTOSOWANIE SIĘ DO TEGO OSTRZEŻENIA MOżE GROZIĆ
OBRAŻENIAMI CIAłA SERWISANTA, OPERATORA LUB PACJENTA W WYNIKU
PORAŻENIA PRĄDEM, URAZU MECHANICZNEGO LUB INNEGO RODZAJU
ZAGROŻEŃ.

• ACEST MANUAL DE SERVICE ESTE DISPONIBIL NUMAI ÎN LIMBA ENGLEZĂ.

• DACĂ UN FURNIZOR DE SERVICII PENTRU CLIENŢI NECESITĂ O ALTĂ LIMBĂ
DECÂT CEA ENGLEZĂ, ESTE DE DATORIA CLIENTULUI SĂ FURNIZEZE O
TRADUCERE.

• NU ÎNCERCAŢI SĂ REPARAŢI ECHIPAMENTUL DECÂT ULTERIOR
CONSULTĂRII ŞI ÎNŢELEGERII ACESTUI MANUAL DE SERVICE.

• IGNORAREA ACESTUI AVERTISMENT AR PUTEA DUCE LA RĂNIREA
DEPANATORULUI, OPERATORULUI SAU PACIENTULUI ÎN URMA
PERICOLELOR DE ELECTROCUTARE, MECANICE SAU DE ALTĂ NATURĂ.

v

GE HEALTHCARE PROPRIETARY TO GE
D

IRECTION 5344303-100, REVISION 2 VIVID P3 SERVICE MANUAL

• ДАННОЕ РУКОВОДСТВО ПО ОБСЛУЖИВАНИЮ ПРЕДОСТАВЛЯЕТСЯ
ТОЛЬКО НА АНГЛИЙСКОМ ЯЗЫКЕ.

• ЕСЛИ СЕРВИСНОМУ ПЕРСОНАЛУ КЛИЕНТА НЕОБХОДИМО РУКОВОДСТВО

НЕ НА АНГЛИЙСКОМ ЯЗЫКЕ, КЛИЕНТУ СЛЕДУЕТ САМОСТОЯТЕЛЬНО
ОБЕСПЕЧИТЬ ПЕРЕВОД.

ОСТОРОЖНО!

• ПЕРЕД ОБСЛУЖИВАНИЕМ ОБОРУДОВАНИЯ ОБЯЗАТЕЛЬНО ОБРАТИТЕСЬ
К ДАННОМУ РУКОВОДСТВУ И ПОЙМИТЕ ИЗЛОЖЕННЫЕ В НЕМ СВЕДЕНИЯ.

• НЕСОБЛЮДЕНИЕ УКАЗАННЫХ ТРЕБОВАНИЙ МОЖЕТ ПРИВЕСТИ К ТОМУ,
ЧТО СПЕЦИАЛИСТ ПО ТЕХОБСЛУЖИВАНИЮ

, ОПЕРАТОР ИЛИ ПАЦИЕНТ
ПОЛУЧАТ УДАР ЗЛЕКТРИЧЕСКИМ ТОКОМ, МЕХАНИЧЕСКУЮ ТРАВМУ ИЛИ
ДРУГОЕ ПОВРЕЖДЕНИЕ.

• TÁTO SERVISNÁ PRÍRUČKA JE K DISPOZÍCII LEN V ANGLIČTINE.

• AK ZÁKAZNÍKOV POSKYTOVATEĽ SLUŽIEB VYŽADUJE INÝ JAZYK AKO
ANGLIČTINU, POSKYTNUTIE PREKLADATEĽSKÝCH SLUŽIEB JE
ZODPOVEDNOSŤOU ZÁKAZNÍKA.

• NEPOKÚŠAJTE SA VYKONÁVAŤ SERVIS ZARIADENIA SKÔR, AKO SI

UPOZORNENIE

NEPREČÍTATE SERVISNÚ PRÍRUČKU A NEPOROZUMIETE JEJ.

• ZANEDBANIE TOHTO UPOZORNENIA MÔŽE VYÚSTIŤ DO ZRANENIA
POSKYTOVATEĽA SLUŽIEB, OBSLUHUJÚCEJ OSOBY ALEBO PACIENTA
ELEKTRICKÝM PRÚDOM, PRÍPADNE DO MECHANICKÉHO ALEBO INÉHO
NEBEZPEČENSTVA.

VAR NING

DİKKAT

• DEN HÄR SERVICEHANDBOKEN FINNS BARA TILLGÄNGLIG PÅ ENGELSKA.

• OM EN KUNDS SERVICETEKNIKER HAR BEHOV AV ETT ANNAT SPRÅK ÄN
ENGELSKA ANSVARAR KUNDEN FÖR ATT TILLHANDAHÅLLA
ÖVERSÄTTNINGSTJÄNSTER.

• FÖRSÖK INTE UTFÖRA SERVICE PÅ UTRUSTNINGEN OM DU INTE HAR LÄST
OCH FÖRSTÅR DEN HÄR SERVICEHANDBOKEN.

• OM DU INTE TAR HÄNSYN TILL DEN HÄR VARNINGEN KAN DET RESULTERA I
SKADOR PÅ SERVICETEKNIKERN, OPERATÖREN ELLER PATIENTEN TILL
FÖLJD AV ELEKTRISKA STÖTAR, MEKANISKA FAROR ELLER ANDRA FAROR.

• BU SERVİS KILAVUZU YALNIZCA İNGİLİZCE OLARAK SAĞLANMIŞTIR.

• EĞER MÜŞTERİ TEKNİSYENİ KILAVUZUN İNGİLİZCE DIŞINDAK

İ BİR DİLDE
OLMASINI İSTERSE, KILAVUZU TERCÜME ETTİRMEK MÜŞTERİNİN
SORUMLULUĞUNDADIR.

• SERVİS KILAVUZUNU OKUYUP ANLAMADAN EKİPMANLARA MÜDAHALE
ETMEYİNİZ.

• BU UYARININ GÖZ ARDI EDİLMESİ, ELEKTRİK ÇARPMASI YA DA MEKANİK
VEYA DİĞER TÜRDEN KAZALAR SONUCUNDA TEKNİSYENİN, OPERATÖRÜN
YA DA HASTANIN YARALANMASINA YOL AÇABİLİR.

vi -

GE HEALTHCARE PROPRIETARY TO GE
D

IRECTION 5344303-100, REVISION 2 VIVID P3 SERVICE MANUAL

vii

GE HEALTHCARE PROPRIETARY TO GE
D

IRECTION 5344303-100, REVISION 2 VIVID P3 SERVICE MANUAL

DAMAGE IN TRANSPORTATION

All packages should be closely examined at time of delivery. If damage is apparent write “Damage In
Shipment” on ALL copies of the freight or express bill BEFORE delivery is accepted or “signed for” by
a GE representative or hospital receiving agent. Whether noted or concealed, damage MUST be
reported to the carrier immediately upon discovery, or in any event, within 14 days after receipt, and the
contents and containers held for inspection by the carrier. A transportation company will not pay a claim
for damage if an inspection is not requested within this 14 day period.

CERTIFIED ELECTRICAL CONTRACTOR STATEMENT - FOR USA ONLY

All electrical Installations that are preliminary to position ing of the equipment at the site prepared for the
equipment shall be performed by licensed electrical contractors. Othe r conn ections between pieces o f
electrical equipment, calibrations and testing sha ll be performed by q ualified GE Healthcare person nel.
In performing all electrical work on these products, GE will use its own specially trained field engineers.
All of GE’s electrical work on these products will comply with the requirements of the applicable
electrical codes.

The purchaser of GE equipment shall only utilize qualified personnel (i.e., GE’s field engineers,
personnel of third-party service companies with equivalent training, or licensed electricians) to perform
electrical servicing on the equipment.

OMISSIONS & ERRORS

If there are any omissions, errors or suggestions for improving this documentation, please contact the
GE Healthcare Global Documentation Group with specific information listing the system type, manual
title, part number, revision number, page number and suggestion details. Mail the information to:
Service Documentation, 9900 Innovation Drive (RP-2123), Wauwatosa, WI 53226.

GE Healthcare employees should use the iTrak System to report all documentation errors or omissions.

viii -

GE HEALTHCARE PROPRIETARY TO GE
D

IRECTION 5344303-100, REVISION 2 VIVID P3 SERVICE MANUAL

LEGAL NOTES

The contents of this publication may not be copied or duplicated in any form, in whole or in part, without
prior written permission of GE Healthcare.

GE Healthcare may revise this publication from time to time without written notice.

TRADEMARKS

All products and their name brands are trademarks of their respective holders.

COPYRIGHTS

All Material Copyright© 2009 by General Electric Inc. All Rights Reserved.

ix

GE HEALTHCARE PROPRIETARY TO GE
D

IRECTION 5344303-100, REVISION 2 VIVID P3 SERVICE MANUAL

Revision History

Revision Date Reason for change

1 July 12, 2009 Initial Release
2 OCT 15,2009 Updated Chapter 8

List of Effected Pages

Pages Revision Pages Revision Pages Revision

Chapter 8 - Replacement

Procedures

pages 8-1 to 8-83

Chapter 9 - Replacement Parts

pages 9-1 to 9-19

Chapter 10 - Periodic Maintenance

pages 10-1 to 10-25

Index

pages I to 4

2

2

2

2

Title Page 2

Important Precautions

pages i to x

Table of Contents

pages xi to xxviii

Chapter 1 - Introduction

pages 1-1 to 1-18

Chapter 2 - Pre-Installation

pages 2-1 to 2-11

Chapter 3 - Installation

pages 3-1 to 3-30

2

2

2

2

Chapter 4 - Functional Checks

pages 4-1 to 4-40

Chapter 5 - Theory

pages 5-1 to 5-34

Chapter 6 - Service Adjustments

pages 6-1 to 6-2

Chapter 7 - Diagnostics/

Troubleshooting

pages 7-1 to 7-63

2

2

2

2

2 Back Cover 2

x -

GE HEALTHCARE PROPRIETARY TO GE
D

IRECTION 5344303-100, REVISION 2VIVID P3 SERVICE MANUAL

CHAPTER 1

Introduction

Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 1

Purpose of Chapter 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 1

Chapter Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 1

Purpose of Service Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 1

Typical Users of the Service Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 2

Vivid P3 Models Covered by this Manual . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 2

Purpose of Operator Manual(s) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 2

Important Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 3

Conventions Used in Book . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 3

Standard Hazard Icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 4

Product Icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 5

Safety Considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 9

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 9

Human Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 9

Mechanical Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 9

Electrical Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 10

Labels Locations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 11

Warning labels location Tabels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 16

Dangerous Procedure Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 17

Lockout/Tagout Requirements (For USA Only) . . . . . . . . . . . . . . . . . . . . . 1 - 17

Returning/Shipping Probes and Repair Parts . . . . . . . . . . . . . . . . . . . . . . . 1 - 17

EMC, EMI, and ESD. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 18

Electromagnetic Compatibility (EMC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 18

CE Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 18

Electrostatic Discharge (ESD) Prevention . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 18

Customer Assistance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 19

Contact Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 19

System Manufacturer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 20

Table of Contents 1

GE HEALTHCARE PROPRIETARY TO GE
D

IRECTION 5344303-100, REVISION 2 VIVID P3 SERVICE MANUAL

CHAPTER 2

Pre Installation

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 1

Purpose of this chapter 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 1

Chapter Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 1

General Console Requirements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 2

Console Environmental Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 2

Cooling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 2

Lighting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 2

Electrical Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 3

Vivid P3 Power Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 3

Inrush Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 4

Site Circuit Breaker . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 4

Site Power Outlets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 4

Unit Power Plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 4

Power Stability Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 4

EMI Limitations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 5

Scan Probe Environmental Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 6

Time and Manpower Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 6

Facility Needs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 7

Recommended Ultrasound Room Layout . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 7

Purchaser Responsibilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 7

Required Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 8

Desirable Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 8

Recommended and Alternate Ultrasound Room Layout . . . . . . . . . . 2 - 9

Networking Pre-installation Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 10

Stand Alone Scanner (without Network Connection) . . . . . . . . . . . . 2 - 10

Scanner Connected to Hospital’s Network . . . . . . . . . . . . . . . . . . . . 2 - 10

Purpose of DICOM Network Function . . . . . . . . . . . . . . . . . . . . . . . . 2 - 10

DICOM Option Pre-installation Requirements . . . . . . . . . . . . . . . . . . 2 - 10

2 Table of Contents

GE HEALTHCARE PROPRIETARY TO GE
D

IRECTION 5344303-100, REVISION 2VIVID P3 SERVICE MANUAL

CHAPTER 3

Installation

Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 1

Purpose of Chapter 3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 1

Average Installation Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 1

Installation Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 2

Safety Reminders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 2

Receiving and Unpacking the Equipment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 3

Moving into Position . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 7

Adjusting System Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 7

Product Locator Installation Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 7

Packing the Equipment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 8

Preparing for Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 9

Verify Customer Order . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 9

Physical Inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 9

System Voltage Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 9

EMI Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 9

Checking the Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 9

Completing the Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 10

Power On / Boot Up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 10

Scanner Power On . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 10

Turn on the system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 11

Power Off/ Shutdown . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 11

Back-end Processor Power Down . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 11

Scanner Shutdown . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 12

Transducer Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 13

System Configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 14

System Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 14

Physical Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 14

Approved on-board peripherals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 15

Connecting Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 16

Peripherals/Accessories Connector Panel . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 16

Rear Panel Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 16

TOP Panel Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 17

This section indicates the pin assignment for each connector. . . . . 3 - 18

Connect peripherals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 19

Available Probes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 23

Software/Option Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 24

Table of Contents 3

GE HEALTHCARE PROPRIETARY TO GE
D

IRECTION 5344303-100, REVISION 2 VIVID P3 SERVICE MANUAL

Connectivity Installation Worksheet. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 25

Loading Base Image Software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 26

Software Version check out. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 27

Functional Check-out . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 27

Paperwork . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 28

Product Locator Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 28

User Manual(s) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 28

4 Table of Contents

GE HEALTHCARE PROPRIETARY TO GE
D

IRECTION 5344303-100, REVISION 2VIVID P3 SERVICE MANUAL

CHAPTER 4

Functional Checks

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 1

Purpose for Chapter 4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 1

Required Equipment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 1

General Procedure. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 2

Power On/Boot Up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 2

Boot Up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 2

Turn on the system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 3

Power Off/ Shutdown . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 3

Back-end Processor Power Down . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 3

Scanner Shutdown . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 4

Full Maintenance Reboot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 4

Archiving and Loading Presets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 5

Archiving Presets to an DVD-R Disk (or USB memory device) . . . . 4 - 5

Loading Presets from an DVD-R disk (or USB memory device) . . . 4 - 6

Adjusting the Display Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 6

System Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 7

Control Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 7

Vivid P3 SoftMenu Key Tour . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 8

Monitor Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 9

B Mode Checks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 10

Preparations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 10

B Mode OP Panel Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 11

B Mode Softmenu Key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 12

M Mode Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 13

Preparations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 13

M Mode OP Panel Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 14

M Mode Softmenu Key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 15

Color Flow Mode Checks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 16

Preparations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 16

Color Flow Mode OP Panel Controls . . . . . . . . . . . . . . . . . . . . . . . . 4 - 17

Color Flow Mode Softemenu Key . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 18

Doppler Mode Checks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 20

Preparations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 20

Doppler Mode OP Panel Controls . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 21

Doppler Mode OP Panel Controls . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 22

Basic Measurements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 24

Distance and Tissue Depth Measurements . . . . . . . . . . . . . . . . . . . 4 - 24

Circumference/Area (Ellipse) Measurement . . . . . . . . . . . . . . . . . . 4 - 24

Worksheets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 24

Probe/Connectors Usage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 25

Table of Contents 5

GE HEALTHCARE PROPRIETARY TO GE
D

IRECTION 5344303-100, REVISION 2 VIVID P3 SERVICE MANUAL

Connecting a probe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 25

Activating the probe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 25

Deactivating the probe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 25

Disconnecting the probe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 25

Using Cine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 25

Activating CINE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 25

Quickly Move to Start/End Frame . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 25

Start Frame/End Frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 26

Adjusting the CINE Loop Playback Speed . . . . . . . . . . . . . . . . . . . . 4 - 26

Moving through a CINE Loop Frame By Frame . . . . . . . . . . . . . . . . 4 - 26

Image Management (QG) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 26

Backup and Restore Database, Preset Configurations and Images . . . . . . 4 - 27

Formatting Media . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 27

Backup System Presets and Configurations . . . . . . . . . . . . . . . . . . . 4 - 28

Restore System Presets and Configurations . . . . . . . . . . . . . . . . . . 4 - 29

Archiving Images . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 30

Full Backup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 32

Software Configuration Checks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 36

Peripheral Checks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 36

6 Table of Contents

GE HEALTHCARE PROPRIETARY TO GE
D

IRECTION 5344303-100, REVISION 2VIVID P3 SERVICE MANUAL

CHAPTER 5

Components and Functions (Theory)

Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 1

Block Diagrams and Theory. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 2

Block Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 2

General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 3

Front End . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 4

The Back End . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 5

Top Console . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 5

External I/O . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 6

Peripherals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 6

Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 7

PWA Assy Diagrams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 8

TMST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 8

Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 10

RX64 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 11

Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 11

TX64 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 12

Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 12

CWD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 13

Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 13

Connector Board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 14

Rear Panel-1 & Rear panel 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 15

PDB (Power Distribution Board) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 16

Keyboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 17

Scan Control Board LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 18

Power Diagrams. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 19

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 19

AC Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 19

Common Service Platform . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 20

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 20

Global Service User Interface (GSUI) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 20

Internationalization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 20

Service Login . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 20

Access / Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 20

Service Dongle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 21

Entering Technical Support Mode During Boot-up . . . . . . . . . . . . . 5 - 21

Entering Technical Support Mode when System is Powered ON . . 5 - 23

Service Home Page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 24

Table of Contents 7

GE HEALTHCARE PROPRIETARY TO GE
D

IRECTION 5344303-100, REVISION 2 VIVID P3 SERVICE MANUAL

Error Logs Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 25

Logs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 26

Utilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 27

Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 27

Exit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 28

Diagnostics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 29

Diagnostics Execution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 30

Diagnostic Reports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 30

Image Quality . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 31

Calibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 31

Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 32

Utilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 32

Replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 33

PM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 33

8 Table of Contents

GE HEALTHCARE PROPRIETARY TO GE
D

IRECTION 5344303-100, REVISION 2VIVID P3 SERVICE MANUAL

CHAPTER 6

Service Adjustments

Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 - 1

Purpose of this chapter 6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 - 1

Monitor Adjustments. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 - 2

Adjustments Procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 - 2

Table of Contents 9

GE HEALTHCARE PROPRIETARY TO GE
D

IRECTION 5344303-100, REVISION 2 VIVID P3 SERVICE MANUAL

CHAPTER 7

Diagnostics/Troubleshooting

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 1

Purpose of Chapter 7 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 1

Gathering Trouble Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 2

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 2

Collect Vital System Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 2

Collect a Trouble Image with Logs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 3

USB Quick Save . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 4

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 4

Check and Record the P3 Key Function . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 4

Setting the P3 Key to USB Quick Save . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 5

Screen Captures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 6

Check and Record the P3 Key Function . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 6

Setting the P3 Key to Screen Capture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 6

Capturing a Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 6

Reset the P3 Key to Customer’s Functionality . . . . . . . . . . . . . . . . . . . . . . . 7 - 8

Global Service User Interface (GSUI) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 9

Enter global service user interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 9

Active Diagnostic Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 10

Control Frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 10

Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 10

Loop Count . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 10

Progress Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 10

Short Text Message . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 11

Background Color . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 11

Common Diagnostics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 12

Utilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 12

Disruptive Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 12

System Shutdown . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 12

PC Diagnostics (Non-Interactive Tests) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 13

Essential Tests . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 13

System Board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 13

Hard Disk Surface Scan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 14

Hard Disk Quick Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 14

PCIBus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 14

Video Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 14

Network Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 14

CMOS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 14

10 Table of Contents

GE HEALTHCARE PROPRIETARY TO GE
D

IRECTION 5344303-100, REVISION 2VIVID P3 SERVICE MANUAL

DRAM Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 14

PC Diagnostics (Interactive Tests) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 15

Keyboard Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 15

Mouse Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 15

Restart Vivid P3 After Diagnostics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 15

Vivid P3 Diagnostic Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 16

FRU Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 16

TMST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 16

RX64 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 17

TX64 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 18

Wire -Lan Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 19

Insite II Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 20

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 25

Console Troubleshooting Trees . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 25

System Doesn’t Boot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 25

Structured Artifact in the image . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 27

B Mode Low Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 28

B Mode Low Image Quality . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 29

Noise in B Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 30

Color Flow Low Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 31

Spectrum Doppler Low Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 32

Noise in Color Flow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 33

Scan Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 34

Trackball . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 36

LCD Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 37

Peripheral Troubleshooting Trees . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 38

Unable Recording by Printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 38

Drive Issue DVD-RW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 39

LCD Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 40

Network Troubleshooting Trees . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 41

No Connection to the Network at All . . . . . . . . . . . . . . . . . . . . . . . . 7 - 41

No Contact With Server, But Connection to Network is OK. . . . . . . 7 - 42

Table of Contents 11

GE HEALTHCARE PROPRIETARY TO GE
D

IRECTION 5344303-100, REVISION 2 VIVID P3 SERVICE MANUAL

CHAPTER 8

Replacement Procedures

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 1

Purpose of Chapter 8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Disassembly/Re-assembly. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . of Vivid

P3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 2

Warning and Caution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 2

Standard tools list for Vivid P3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 2

LCD Assy (FRU P/N: 5315112) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 3

FRU BOM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 3

Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 3

Needed Manpower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 3

Preparations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 3

Removal procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 3

Mounting Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 6

Functional Checkout Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 6

LCD Arm Cover (FRU P/N: 5310093) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 7

Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 7

Needed Manpower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 7

Preparations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 7

Removal procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 7

Mounting procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 7

Functional Checkout Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 7

Handle P3 Console (FRU P/N :5315120) . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 8

Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 8

FRU BOM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 8

Needed Manpower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 8

Preparations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 8

Removal procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 8

Mounting procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 9

Functional Checkout Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 9

Keyboard Assembly (FRU P/N :5314404) . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 10

Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 10

Needed Manpower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 10

Preparations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 10

Removal Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 10

Mounting procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 13

Replace Keyboard Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 13

Functional Checkout Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 13

TGC PWA FRU Assy (FRU P/N :5315107) . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 14

Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 14

FRU BOM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 14

Needed Manpower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 14

Preparations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 14

12 Table of Contents

GE HEALTHCARE PROPRIETARY TO GE
D

IRECTION 5344303-100, REVISION 2VIVID P3 SERVICE MANUAL

Removal procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 14

Mounting procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 15

Functional Checkout Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 15

Alpha Numeric Keyboard with cables (FRU P/N :5340669) . . . . . . . . . . . . 8 - 16

Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 16

FRU BOM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 16

Needed Manpower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 16

Preparations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 16

Removal procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 16

Mounting procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 17

Functional Checkout Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 17

Optical Trackball Assy (FRU P/N :5315029) . . . . . . . . . . . . . . . . . . . . . . . 8 - 18

Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 18

FRU BOM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 18

Needed Manpower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 18

Preparations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 18

Removal procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 18

Mounting procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 19

Functional Checkout Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 19

Keyboard Rear Cover Assy (FRU P/N: 5315122 ). . . . . . . . . . . . . . . . . . . . . . . . . 8 - 20

This is a description on how to remove and replace the keyboard cover Assembly. 8

- 20

Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 20

FRU BOM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 20

Needed Manpower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 20

Preparations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 20

Removal procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 20

Mounting procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 21

Functional Checkout Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 21

Probe Holder (FRU P/N :5168500) / Gel Bottle Holder (FRU P/N :5168636) 8 - 22

Needed Manpower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 22

Preparations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 22

Removal procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 22

Mounting procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 22

Functional Checkout Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 22

Keyboard Knob Set (FRU P/N :5315502 ) & Encoder set (FRU P/N :5262796) 8 - 23

Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 23

FRU BOM For Keyboard Knob set . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 23

FRU BOM For Encoder set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 23

Needed Manpower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 23

Preparations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 23

Removal procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 23

Mounting procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 24

Functional Checkout Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 24

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Mechani-

cals. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 25

RH Side Cover (FRU No :5350996) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 25

Table of Contents 13

GE HEALTHCARE PROPRIETARY TO GE
D

IRECTION 5344303-100, REVISION 2 VIVID P3 SERVICE MANUAL

Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 25

FRU BOM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 25

Needed Manpower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 25

Preparations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 25

Removal Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 25

Mounting procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 26

Functional Checkout Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 26

LH Side Cover (FRU No: 5350992) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 27

Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 27

FRU BOM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 27

Needed Manpower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 27

Preparations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 27

Removal Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 27

Mounting procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 27

Functional Checkout Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 27

Rear Cover (FRU No. 5315117) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 28

Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 28

FRU BOM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 28

Needed Manpower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 28

Preparations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 28

Removal Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 28

Mounting procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 29

Functional Checkout Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 29

Front Cover (FRU No.5315116 ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 30

Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 30

FRU BOM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 30

Needed Manpower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 30

Preparations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 30

Removal Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 30

Mounting procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 31

Functional Checkout Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 31

Top Cover (FRU P/N :5315121) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 32

Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 32

FRU BOM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 32

Needed Manpower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 32

Preparations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 32

Removal Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 32

Mounting procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 34

Functional Checkout Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 34

Caster Wheel Front (FRU P/N :5315118) / Caster Wheel Rear (FRU P/N :5315119)

8 - 35

Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 35

FRU BOM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 35

Needed Manpower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 35

Preparations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 35

Removal Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 35

Mounting procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 36

14 Table of Contents

GE HEALTHCARE PROPRIETARY TO GE
D

IRECTION 5344303-100, REVISION 2VIVID P3 SERVICE MANUAL

Functional Checkout Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 36

Rear EMI Cover (Part of EMI Cover Assy FRU P/N :5315111) . . . . . . . . . 8 - 37

Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 37

FRU BOM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 37

Needed Manpower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 37

Preparations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 37

Removal Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 37

Mounting procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 38

Functional Checkout Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 38

Right EMI Cover (Part of EMI Cover Assy FRU P/N :5315111) . . . . . . . . . 8 - 39

Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 39

FRU BOM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 39

Needed Manpower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 39

Preparations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 39

Removal Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 39

Mounting procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 40

Functional Checkout Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 40

Left EMI Cover (Part of EMI Cover Assy FRU P/N: 5315111) . . . . . . . . . . 8 - 41

Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 41

FRU BOM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 41

Needed Manpower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 41

Preparations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 41

Removal Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 41

Mounting procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 42

Functional Checkout Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 42

MST BOARD ASSEMBLY ( PART NO:5315025) . . . . . . . . . . . . . . . . . . . . 8 - 43

Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 43

FRU BOM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 43

Needed Manpower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 43

Preparations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 43

Removal Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 43

Mounting procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 46

Functional Checkout Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 46

HARD DISK DRIVE ASSEMBLY ( PART NO:5315113) . . . . . . . . . . . . . . 8 - 47

Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 47

FRU BOM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 47

Needed Manpower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 47

Preparations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 47

Removal Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 47

Mounting procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 48

Functional Checkout Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 48

USB Cable Set (FRU P/N: 5315039) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 49

Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 49

FRU BOM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 49

Needed Manpower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 49

Preparations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 49

Removal Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 49

Table of Contents 15

GE HEALTHCARE PROPRIETARY TO GE
D

IRECTION 5344303-100, REVISION 2 VIVID P3 SERVICE MANUAL

Functional Checkout Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 49

LV and Power distribution Board (Part No: 5315028) / Power distribution Board As-

sembly (Part no :5315104) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 50

Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 50

FRU BOM FOR LV & PDB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 50

FRU BOM FOR PDB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 50

Needed Manpower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 50

Preparations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 50

Removal Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 50

Mounting procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 52

Functional Checkout Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 52

Rear Panel Assy (110V FRU P/N: 5315503/ 220V FRU P/N: 5315504). . . . . . . . . 8 - 53

Rear Panel Assy (FRU No.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 53

Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 53

FRU BOM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 53

Needed Manpower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 53

Preparations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 53

Removal Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 53

Mounting procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 55

Functional Checkout Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 55

Connector Board Assy 3PP (FRU No. 5314414) . . . . . . . . . . . . . . . . . . . . 8 - 56

Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 56

Needed Manpower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 56

Preparations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 56

Removal Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 56

Mounting procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 58

Functional Checkout Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 59

TX Board (FRU No. 2404903)/ Flex Cable (Con to Tx) Assy (FRU No.5315108) 8 -

60

Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 60

FRU BOM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 60

Needed Manpower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 60

Preparations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 60

Removal Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 60

Mounting procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 61

Functional Checkout Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 61

RX Board (FRU P/N: 5315027) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 62

Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 62

FRU BOM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 62

Needed Manpower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 62

Preparations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 62

Removal Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 62

Mounting procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 63

Functional Checkout Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 64

Flexi Cable (MST to TX) Assy (FRU No.5315109) . . . . . . . . . . . . . . . . . . . 8 - 65

Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 65

FRU BOM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 65

16 Table of Contents

GE HEALTHCARE PROPRIETARY TO GE
D

IRECTION 5344303-100, REVISION 2VIVID P3 SERVICE MANUAL

Needed Manpower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 65

Preparations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 65

Removal Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 65

Mounting procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 67

Functional Checkout Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 67

Power Block . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 68

Transformer Assembly (FRU No. 5196448) . . . . . . . . . . . . . . . . . . . . . . . . 8 - 68

Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 68

Needed Manpower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 68

Preparations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 68

Removal Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 68

Mounting procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 70

Functional Checkout Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 70

Key Caps (FRU P/N: 5315124) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 71

Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 71

Needed Manpower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 71

Preparations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 71

Removal Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 71

Mounting procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 72

Functional Checkout Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 72

DVD Drive. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 73

DVD Tray Assembly (FRU P/N: ) / DVD Drive ( FRU P/N: 5312274) . . . . . 8 - 73

Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 73

FRU BOM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 73

Needed Manpower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 73

Preparations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 73

Removal Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 73

Mounting procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 73

Functional Checkout Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 74

Power Cable. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 75

Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 75

Needed Manpower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 75

Preparations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 75

Removal Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 75

Mounting procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 75

Functional Checkout Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 75

Signal Cable Set (FRU P/N: 5315042). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 77

Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 77

FRU BOM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 77

Needed Manpower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 77

Preparations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 77

Removal Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 77

Functional Checkout Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 77

Power Cable Set (FRU P/N: 5315036). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 78

Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 78

FRU BOM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 78

Needed Manpower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 78

Table of Contents 17

GE HEALTHCARE PROPRIETARY TO GE
D

IRECTION 5344303-100, REVISION 2 VIVID P3 SERVICE MANUAL

Preparations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 78

Removal Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 78

Functional Checkout Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 78

CWD Assy (FRU No:5315026 ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 79

Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 79

Needed Manpower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 79

Preparations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 79

Removal procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 79

Functional Checkout Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 79

Loading Base Image Software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 81

18 Table of Contents

GE HEALTHCARE PROPRIETARY TO GE
D

IRECTION 5344303-100, REVISION 2VIVID P3 SERVICE MANUAL

CHAPTER 9

Renewal Parts

Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 - 1

Purpose of Chapter 9 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 - 1

List of Abbreviations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 - 1

Renewal Parts Lists . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 - 2

Equipment Models Covered in this Chapter . . . . . . . . . . . . . . . . . . . . . . . . 9 - 2

Operator Console Assy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 - 4

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LCD

Assy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 - 5

Keyboard Assy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 - 6

Mechanical Assy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 - 8

Pwa Assy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 - 11

cable assy. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 - 13

Accessories and Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 - 16

Probe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 - 17

keyboard key caps Fru part no :- 5315124. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 - 18

Table of Contents 19

GE HEALTHCARE PROPRIETARY TO GE
D

IRECTION 5344303-100, REVISION 2 VIVID P3 SERVICE MANUAL

CHAPTER 10

Care & Maintenance

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 - 1

Periodic Maintenance Inspections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 - 1

Purpose of Chapter 10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 - 1

Why do Maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 - 2

Keeping Records . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 - 2

Quality Assurance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 - 2

Maintenance Task Schedule . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 - 2

How often should care & maintenance tasks be performed? . . . . . . . . . . . . 10 - 2

Tools Required. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 - 4

Standard GE Tool Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 - 4

Special Tools, Supplies and Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 - 6

Specific Requirements for Care & Maintenance . . . . . . . . . . . . . . . . 10 - 6

System Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 - 7

Preliminary Checks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 - 7

Functional Checks (See Also Chapter 4) . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 - 8

System Checks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 - 8

Peripheral/Option Checks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 - 9

Input Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 - 9

AC Power Inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 - 9

Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 - 9

General Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 - 9

Physical Inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 - 10

Optional

Probe Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 - 11

Using a Phantom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 - 12

Electrical Safety Tests . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 - 12

Safety Test Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 - 12

GEMS Leakage Current Limits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 - 13

Outlet Test - Wiring Arrangement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 - 14

Chassis Leakage Current Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 - 15

Diagnostic Checks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 - 11

View the Logs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 - 11

Probe Related Checks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 - 11

Basic Probe Care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 - 11

Basic Probe Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 - 11

Definition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 - 15

20 Table of Contents

GE HEALTHCARE PROPRIETARY TO GE
D

IRECTION 5344303-100, REVISION 2VIVID P3 SERVICE MANUAL

Generic Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 - 15

Dale 600 Meter Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 - 16

Data Sheet for enclosure Source Leakage Current . . . . . . . . . . . . . 10 - 17

Probe Leakage Current Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 - 18

Definition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 - 18

Generic Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 - 18

Meter Procedure Using Probe Adapter . . . . . . . . . . . . . . . . . . . . . . 10 - 18

No Meter Probe Adapter Procedure . . . . . . . . . . . . . . . . . . . . . . . . 10 - 20

Data Sheet for Transducer Source Leakage Current . . . . . . . . . . . 10 - 21

When There's Too Much Leakage Current... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 - 22

Table of Contents 21

GE HEALTHCARE PROPRIETARY TO GE
D

IRECTION 5344303-100, REVISION 2 VIVID P3 SERVICE MANUAL

This page was intentionally left blank.

22 Table of Contents

GE HEALTHCARE PROPRIETARY TO GE
D

IRECTION 5344303-100, REVISION 2 VIVID P3 SERVICE MANUAL

Chapter 1
Introduction

Section 1-1 Overview

1-1-1 Purpose of Chapter 1

This chapter describes important issues related to safely servicing this ultrasound machine. The service
provider must read and understand all the information presented here before installing or servicing a
unit.

1-1-2 Chapter Contents

Table 1-1 Contents in Chapter 1

Section Description Page Number

1-1

1-2

1-3

1-4

1-5

Overview

Important Conventions

Safety Considerations

EMC, EMI, and ESD

Customer Assistance

1-1-3 Purpose of Service Manual

This Service Manual provides service information for the Vivid P3 Ultrasound Scanning System. It
contains the following chapters:

1.) Chapter 1 - Introduction: Contains a content summary and warnings.

2.) Chapter 2 - Pre Installation: Contains pre-installation requirements for the Vivid P3.

3.) Chapter 3 - Installation: Contains installation procedures.

4.) Chapter 4 - Functional Checks: Contains functional checks that are recommended as part of the
installation, or as required during servicing and periodic maintenance.

5.) Chapter 5 - Components and Functions (Theory): Contains block diagrams and functional
explanations of the electronics.

6.) Chapter 6 - Service Adjustments: Contains instructions on how to make availa ble adjustments to
the Vivid P3.

7.) Chapter 7 - Diagnostics/Troubleshooting: Provides procedure s for running diagnostic or related
routines for the Vivid P3.

8.) Chapter 8 - Replacement Procedures: Provides disassembly procedures and reassembly
procedures for all changeable Field Replaceable Units (FRU).

9.) Chapter 9 - Renewal Parts: Contains a complete list of field replaceable parts for the Vivid P3.

10.)Chapter 10 - Care & Maintenance: Provides periodic maintenance procedures for the Vivid P3.

1-1

1-3

1-9

1-18

1-19

Chapter 1 Introduction 1-1

GE HEALTHCARE PROPRIETARY TO GE
D

IRECTION 5344303-100, REVISION 2 VIVID P3 SERVICE MANUAL

1-1-4 Typical Users of the Basic Service Manual

• Service Personnel (installation, maintenance, etc.).

• Hospital’s Service Personnel

• Contractors (Some parts of Chapter 2 - Pre-Installation)

1-1-5 Vivid P3 Models Covered by this Manual

Table 1-2 Vivid P3 Model Designations

Part Number Description

5350375 Vivid P3 System INDIA 230V
5350378 Vivid P3 System CHINA 230V
5350379 Vivid P3 System CHILE/KOREA 230V
5350380 Vivid P3 System EUROPE 230V
5350381 Vivid P3 System AMERICAS 110V

1-1-6 Purpose of Operator Manual(s)

The Operator Manual(s) should be fully read and understood before operating the Vivid P3 and also
kept near the unit for quick reference.

1-2 Section 1-1 - Overview

GE HEALTHCARE PROPRIETARY TO GE
D

IRECTION 5344303-100, REVISION 2 VIVID P3 SERVICE MANUAL

Section 1-2 Important Conventions

1-2-1 Conventions Used in Book

Icons

Pictures, or icons, are used wherever they reinforce the printed message. The icons, labels and
conventions used on the product and in the service information are described in this chapter.

Safety Precaution Messages

Various levels of safety precaution messages may be found on the equipment and in the service
information. The different levels of concern are identi fied by a flag word that precedes the precautionary
message. Known or potential hazards are labeled in one of following ways:

DANGER

DANGER IS USED TO INDICATE THE PRESENCE OF A HAZARD THAT WILL
CAUSE SEVERE PERSONAL INJURY OR DEATH IF THE INSTRUCTIONS ARE
IGNORED.

WARNINGWARNING

CAUTION

NOTICE

NOTE: Notes provide important information about an item or a procedure.

WARNING IS USED TO INDICATE THE PRESENCE OF A HAZARD THAT CAN CAUSE
SEVERE PERSONAL INJURY AND PROPERTY DAMAGE IF INSTRUCTIONS ARE
IGNORED.

Caution is used to indicate the presence of a hazard that will or can cause minor personal injury
and property damage if instructions are ignored.

Equipment Damage Possible
Notice is used when a hazard is present that can cause property damage but has absolutely no

personal injury risk.

Example: Disk drive will crash.

Information contained in a NOTE can often save you time or effort.

Chapter 1 Introduction 1-3

GE HEALTHCARE PROPRIETARY TO GE
D

IRECTION 5344303-100, REVISION 2 VIVID P3 SERVICE MANUAL

1-2-2 Standard Hazard Icons

Important information will always be preceded by the exclamation point contained within a triangle, as
seen throughout this chapter. In addition to text, several different graphical icons (symbo ls) may be
used to make you aware of specific types of hazards that could cause harm.

Table 1-3 Standard Hazard Icons

ELECTRICAL MECHANICAL RADIATION

LASER HEAT

LASER

LIGHT

Other hazard icons make you aware of specific procedures that should be followed.

Table 1-4 Standard Icons Indicating a Special Procedure Be Used

AVOID STATIC ELECTRICITY TAG AND LOCK OUT WEAR EYE PROTECTION

TAG

&

LOCKOUT

Date

Signed

EYE

PROTECTION

1-4 Section 1-2 - Important Conventions

GE HEALTHCARE PROPRIETARY TO GE
D

IRECTION 5344303-100, REVISION 2 VIVID P3 SERVICE MANUAL

1-2-3 Product Icons

The following table describes the purpose and locatio n of safety labe ls and other importan t information
provided on the equipment.

Table 1-5 Warnings

LABEL/SYMBOL PURPOSE/MEANING LOCATION

Identification and Rating Plate • Manufacture’s name

Type/Class Label Used to indicate the degree of safety or

IP Code (IPX1 or IPX8) Indicates the degree of protection

• Date of manufacture

• Model and serial numbers

• Electrical ratings (Volts, Amps, phase,
and frequency)

protection.

provided by the enclosure per IEC60

529. IPX1 cannot be used in operating

room environment; IPX8 can be used in
operating room environment.

Equipment Type BF (man in the box
symbol) IEC 878-02-03 indicates B
Type equipment having a floating
applied part.

See ‘Identification and Rating Plate’ on
<Italic>page 1-5 for more information.

Bottom of Footswitch

Probe and PCG marked Type BF

ATTENTION - Consult accompanying
documents is intended to alert the user
to refer to the operator manual or other
instructions when complete information
cannot be provided on the label.

“CAUTION - Dangerous voltage” (the
lightning flash with arrowhead in
equilateral triangle) is used to indicate
electric shock hazards.

“Mains OFF” indicates the power off
position of the mains power breaker.

“Mains ON” indicates the power on
position of the mains power breaker.

“ON” indicates the power on position of
the power switch.

CAUTION: This Power Switch DOES
NOT ISOLATE Mains Supply.

“Standby” indicates the power standby
position of the power switch.

CAUTION: This Power Switch DOES
NOT ISOLATE Mains Supply.

“Protective Earth” indicates the
protective earth (grounding) terminal.

Various

Rear panel and inside of console

See the Console Overview section for
location information.

See the Console Overview section for
location information.

See the Console Overview section for
location information.

Internal

Chapter 1 Introduction 1-5

GE HEALTHCARE PROPRIETARY TO GE
D

IRECTION 5344303-100, REVISION 2 VIVID P3 SERVICE MANUAL

Table 1-5 Warnings

LABEL/SYMBOL PURPOSE/MEANING LOCATION

“Equipotentiality” indicates the terminal
to be used for connecting equipotential
conductors when interconnecting
(grounding) with other equipment.
Connection of additional protective
earth conductors or potential
equalization conductors is not
necessary in most cases and is only
recommended for situations involving
multiple equipment in a high-risk patient
environment to provide assurance that
all equipment is at the same potential
and operates within acceptable leakage
current limits. An example of a high­risk patient would be a special
procedure where the patient has an
accessible conductive path to the heart
such as exposed cardiac pacing leads.

Alternating Current symbol is in
accordance with IEC 60878-01-14.

Rear of console

Rear Panel, Rating Plate, Circuit
breaker label of console and front panel
(if applicable).

Date of manufacture.
The date could be a year, year and

month, or year, month and day, as
appropriate. See ISO 8601 for date
formates.

Catalog or model number. Rating Plate

Serial number Rating Plate

Direct Current.
For products to be powered from a DC

supply.

Type CF Defib-Proof Applied Part (heart
in the box with paddle) symbolis in
accordance with IEC 60878-02-06.

Rating Plate

Rating Plate

ECG Module

1-6 Section 1-2 - Important Conventions

GE HEALTHCARE PROPRIETARY TO GE
D

IRECTION 5344303-100, REVISION 2 VIVID P3 SERVICE MANUAL

Table 1-5 Warnings

LABEL/SYMBOL PURPOSE/MEANING LOCATION

This symbol indicates that the waste of
electrical and electronic equipment
must not be disposed as unsorted
municipal waste and must be collected
separately. Please contact an
authorized representative of the
manufacturer for information concerning
the decommissioning of your
equipment.

No hazardous substance, above the
maximum concentration value, is
present. Maximum concentration
values for electronic information
products, as set by the People’s
Republic of China Electronic Industry
Standard SJ/T11364-2006, include the
hazardous substances of lead, mercury,
hexavalent chromium, cadmium,
polybrominated biphenyl (PBB), and
polybrominated diphenyl ether (PBDE).

Indicates the presence of hazardous
substance(s) above the maximum
concentration value. Maximum
concentration values for electronic
information products, as set by the
People’s Republic of China Electronic
Industry Standard SJ/T11364-2006,
include the hazardous substances of
lead, mercury, hexavalent chromium,
cadmium, polybrominated biphenyl
(PBB), and polybrominated diphenyl
ether (PBDE). “20” indicates the
number of years during which the
hazardous substance(s) will not leak or
mutate so that the use of this product
will not result in any severe
environmental pollution, bodily injury, or
damage to any assets.

DO NOT place a finger, hand or any
object on the joint of the monitor or
monitor arm to avoid injury when
moving the monitor and monitor arm.

Rating Plate

Rear Panel

Rear of the LCD monitor

Do not use the following devices near
this equipment: cellular phone, radio
receiver, mobile radio transmitter, radio
controlled toy, broadband power lines,
etc. Use of these devices near this
equipment could cause this equipment
to perform outside the published
specifications. Keep power to these
devices turned off when near this
equipment.

Rear Panel

Chapter 1 Introduction 1-7

GE HEALTHCARE PROPRIETARY TO GE
D

IRECTION 5344303-100, REVISION 2 VIVID P3 SERVICE MANUAL

Table 1-5 Warnings

LABEL/SYMBOL PURPOSE/MEANING LOCATION

“CAUTION

This unit weighs...

Special care must be used to avoid..."

This precaution is intended to prevent
injury that may result if one person
attempt to move the unit considerable
distances or on an incline due to the
weight of the unit.

This product consists of devices that
may contain mercury, which must be
recycled or disposed of in accordance
with local, state, or country laws.
(Within this sytem, the backlight lamps
in the monitor display, contain mercury.)

On the console where easily seen
during transport

1-8 Section 1-2 - Important Conventions

GE HEALTHCARE PROPRIETARY TO GE
D

IRECTION 5344303-100, REVISION 2 VIVID P3 SERVICE MANUAL

Section 1-3 Safety Considerations

1-3-1 Introduction

The following safety precautions must be observed duri ng all phases of operation, service and repair of
this equipment. Failure to comply with these precautions or with specific warnings elsewhere in this
manual, violates safety standards of design, manufacture and intended use of the equipment.

1-3-2 Human Safety

Operating personnel must not remove the system covers.
Servicing should be performed by authorized personnel only.
Only personnel who have participated in a Vivid P3 Training are authorized to service the equipment.

1-3-3 Mechanical Safety

WARNINGWARNING

Ultrasound probes are highly sensitive medical instruments that can ea sily be damaged
by improper handling. Use care when handling and protect from damage when not in
use. Do not use a damaged or defective probe. Failure to follow these precautions can
result in serious injury and equipment damage.

WARNINGWARNING

CAUTION

NOTE: Special care should be taken when transporting the unit in a vehicle:

Never use a probe that has fallen to the floor. Even if it looks ok, it may be damaged.

The Vivid P3 weights 80kg or more, depending on installed peripherals, when ready for use. To
avoid possible injury and equipment damage:

ALWAYS:

• Use the handle to move the system.

• Do not let the system strike walls or door frame.

• Limit movement to a slow careful walk.

• Before transporting, place the system in its special storage case.

• Ensure that the system is firmly secured while inside the vehicle.

• Secure system with straps or as directed otherwise to prevent motion during transport.

• Prevent vibration damage by driving cautiously. Avoid unpaved roads, excessive speeds, and
erratic stops or starts.

Chapter 1 Introduction 1-9

GE HEALTHCARE PROPRIETARY TO GE
D

IRECTION 5344303-100, REVISION 2 VIVID P3 SERVICE MANUAL

1-3-4 Electrical Safety

To minimize shock hazard, the equipment chassis must be connected to an electrical ground. The
system is equipped with a three-conductor AC power cable. This must be plugged into an approved
electrical outlet with protective ground.

The power outlet used for this equipment should not be shared with other types of equipment.
Both the system power cable and the power connector meet international electrical standards.

1-10 Section 1-3 - Safety Considerations

GE HEALTHCARE PROPRIETARY TO GE
D

IRECTION 5344303-100, REVISION 2 VIVID P3 SERVICE MANUAL

1-3-5 Labels Locations

Figure 1-1 Label Location for Vivid P3

Chapter 1 Introduction 1-11

GE HEALTHCARE PROPRIETARY TO GE
D

IRECTION 5344303-100, REVISION 2 VIVID P3 SERVICE MANUAL

1-3-5 Labels Locations (cont’d)

Figure 1-2 Label Location for Vivid P3

1-12 Section 1-3 - Safety Considerations

GE HEALTHCARE PROPRIETARY TO GE
D

IRECTION 5344303-100, REVISION 2 VIVID P3 SERVICE MANUAL

1-3-5 Labels Locations (cont’d)

Figure 1-3 Label Location for Vivid P3

Chapter 1 Introduction 1-13

GE HEALTHCARE PROPRIETARY TO GE
D

IRECTION 5344303-100, REVISION 2 VIVID P3 SERVICE MANUAL

1-3-5 Labels Locations (cont’d)

Figure 1-4

1-14 Section 1-3 - Safety Considerations

GE HEALTHCARE PROPRIETARY TO GE
D

IRECTION 5344303-100, REVISION 2 VIVID P3 SERVICE MANUAL

Figure 1-5

Chapter 1 Introduction 1-15

GE HEALTHCARE PROPRIETARY TO GE
D

IRECTION 5344303-100, REVISION 2 VIVID P3 SERVICE MANUAL

1-3-6 Warning labels location Tabels

L1 (Figure 2-3)

D1: Standard LCD monitor may rotate while
transporting. Bind the system securely to prevent
damage in transportation.
D2: To avoid injury by tipping over, DO NOT PUSH
THIS UNIT FROM THE SIDES.
D3: DO NOT place a finger, hand or any object on
the joint of the monitor or monitor arm to avoid injury
when moving the monitor and monitor arm.Placing
objects on top of the monitor may cause the monitor
to tilt with the falling objects resulting in injury to the
operator.Do not place any objects on the monitor.

L2 (Figure 2-4)

D4: This machine should be used in compliance
with law. Some jurisdictions restrict certain uses,
such as gender determination.

L3 (Figure 2-5)

D5: Identification and Rating Plate.

L4 (Figure 2-6)

D6: Possible shock hazard. Do not remove covers
or panels. No user serviceable parts are inside.
Refer servicing to qualified service personnel.
D7: Do not use the following devices near this
equipment: cellular phone, radio receiver, mobile
radio transmitter, radio controlled toy, etc. Use of
these devices near this equipment could cause this
equipment to perform outside the published
specifications. Keep power to these devices turned
off when near this equipment.
D8: Prescription Device: United States law restricts
this device to sale or use by or on the order of a
physicians U.S.A. Only)
D9: The CE Mark of Conformity indicates this
equipment conforms with the Council Directive 93/
42/EEC
D10: CISPR CAUTION: The <systemFont>Vivid P3
conforms to the CISPR11, Group 1, Class A of the
international standard for Electromagnetic
disturbance characteristics.

D11: WEEE Label: This symbol indicates that the
waste of electrical and electronic equipment must
not be disposed as unsorted municipal waste and
must be collected separately. Please contact an
authorized representative of the manufacturer for
information concerning the decommissioning of
your equipment.
D12: The equipment weighs approximately 80 kg
(176 lbs). To avoid possible injury and equipment
damage when transporting from one area of use to
another:

• Be sure the pathway is clear.• Limit movement to a
slow careful walk.• Use two or more persons to
move the equipment on inclines or long distance.

L6 (Figure 2-8)

D14: Gost Label (Russia Only).

L7 (Figure 2-9)

D15: TUV Label: TUV Listing and Certification Mark
is used to designate conformance to nationally
recognized product safety standards. The Mark
bears the name and/or logo of the testing laboratory,
product category, safety standard to which
conformity is assessed, and a control number

L8 (Figure 2-10)

D16: Circuit breaker Label

L9 (Figure 2-11)

D17: Line Input voltage Label.

L10 (Figure 2-12)

D18: Signal ground point label CAUTION: This is
only for “FUNCTIONAL GROUNDING”, NOT
“PROTECTIVE EARTH”.

L11 (Figure 2-13)

Lamp contains Mercury Dispose According to Stete/
Local Law.

1-16 Section 1-3 - Safety Considerations

GE HEALTHCARE PROPRIETARY TO GE
D

IRECTION 5344303-100, REVISION 2 VIVID P3 SERVICE MANUAL

1-3-7 Dangerous Procedure Warnings

Warnings, such as the examples below, precede potentially dangerous procedures throughout this
manual. Instructions contained in the warnings must be followed.

DANGER

DANGEROUS VOLTAGES, CAPABLE OF CAUSING DEATH, ARE PRESENT
IN THIS EQUIPMENT. USE EXTREME CAUTION WHEN HANDLING, TESTING
AND ADJUSTING.

WARNINGWARNING

WARNINGWARNING

WARNINGWARNING

EXPLOSION WARNING
DO NOT OPERATE THE EQUIPMENT IN AN EXPLOSIVE ATMOSPHERE.

OPERATION OF ANY ELECTRICAL EQUIPMENT IN SUCH AN ENVIRONMENT
CONSTITUTES A DEFINITE SAFETY HAZARD.

DO NOT SUBSTITUTE PARTS OR MODIFY EQUIPMENT
BECAUSE OF THE DANGER OF INTRODUCING ADDITIONAL HAZARDS, DO NOT

INSTALL SUBSTITUTE PARTS OR PERFORM ANY UNAUTHORIZED MODIFICATION
OF THE EQUIPMENT.

SHUT DOWN FORCEDLY OR PLUG IN/OUT ACDC INVALID MAY CAUSE THE
DAMAGE OF SYSTEM FILES.

1-3-8 Lockout/Tagout Requirements (For USA Only)

Follow OSHA Lockout/Tagout requirements by ensuring you are in total control of the electrical Mains
plug.

1-3-9 Returning/Shipping Probes and Repair Parts

Equipment being returned must be clean and free of blood and other infectious substances.
GEMS policy states that body fluids must be properly removed from any part or equipment prior to

shipment. GEMS employees, as well as customers, are responsible for ensuring that parts/equipment
have been properly decontaminated prior to shipment. Under no circumstance should a part or
equipment with visible body fluids be taken or shipped from a clinic or site (for example, body coils or
an ultrasound probe).

The purpose of the regulation is to protect employees in the transportation industry, as well as the
people who will receive or open this package.

NOTE: The US Department of Transportation (DOT) has ruled that “items that were saturated and/or

dripping with human blood that are now caked with dried blood; or which were used or intended
for use in patient care” are “regulate d medi cal waste” for transportation pur poses and must be
transported as a hazardous material.

NOTE: The USER/SERVICE staff should dispose all the waste properly as per federal, state, and local

waste disposal regulation.

Chapter 1 Introduction 1-17

GE HEALTHCARE PROPRIETARY TO GE
D

IRECTION 5344303-100, REVISION 2 VIVID P3 SERVICE MANUAL

Section 1-4 EMC, EMI, and ESD

1-4-1 Electromagnetic Compatibility (EMC)

Electromagnetic compatibility describes a level of performance of a device within its electromagnetic
environment. This environment consists of the device itself and its surroundings including other
equipment, power sources and persons with which the device must interface. Inadequate compatibility
results when a susceptible device fails to perform as intended due interference from its environment or
when the device produces unacceptable levels of emission to its environment. This interference is often
referred to as radio–frequency or electromagnetic interference (RFI/EM I) an d can be rad iated th rough
space or conducted over interconnecting power of signal cables. In ad dition to electromagnetic energy,
EMC also includes possible effects from electrical fields, magnetic fields, electrostatic discharge and
disturbances in the electrical power supply.

1-4-2 CE Compliance

The Vivid P3 unit conforms to all applicable conducted and radiated emission limits and to immunity
from electrostatic discharge, radiated and cond ucted RF fields, magnetic fields and power line tra nsient
requirements.

For applicable standards refer to the Safety Chapter in the Basic User Manual.

NOTE: For CE Compliance , it is critical that all covers, sc rews, shielding, gaskets, mesh, cla mps, are in

good condition, installed tightly without skew or stress. Proper installation following all
comments noted in this service manual is required in order to achieve full EMC performance.

1-4-3 Electrostatic Discharge (ESD) Prevention

WARNINGWARNING

DO NOT TOUCH ANY BOARDS WITH INTEGRATED CIRCUITS PRIOR TO TAKING
THE NECESSARY ESD PRECAUTIONS:

1.FOLLOW GENERAL GUIDELINES FOR HANDLING OF ELECTROSTATIC
SENSITIVE EQUIPMENT.

1-18 Section 1-4 - EMC, EMI, and ESD

GE HEALTHCARE PROPRIETARY TO GE
D

IRECTION 5344303-100, REVISION 2 VIVID P3 SERVICE MANUAL

Section 1-5 Customer Assistance

1-5-1 Contact Information

If this equipment does not work as indicated in this service manual or in the User Manual, or if you
require additional assistance, please contact the loca l distributor or appropriate support resource, as
listed below.

Prepare the following information before you call:

- System ID serial number.

- Software version.

Table 1-6 Phone Numbers for Customer Assistance

Location Phone Number

USA
GE Healthcare
Ultrasound Service Engineering
9900 Innovation Drive
Wauwatosa, WI 53226

Canada 1-800-668-0732

Latin America

Europe
GE Ultraschall Deutschland GmbH& Co. KG
BeethovenstraBe 239
Postfach 11 05 60, D-42665 Solingen
Germany

Asia (Singapore)
GE Ultrasound Asia
Service Department - Ultrasound
298 Tiong Bahru Road #15-01/06
Central Plaza
Singapore 169730

Service: On-site

Service: Parts

Applications support

Service

Applications support

Phone: [phone] (General Imaging and Cardiac)

Fax: [phone]

Asia ultrasound tech support
ANZ+(61)1800647855

China+(86)8008108188
India+(91)1800114567
Korea+(82)262013585
SEA+(65)6277344

1-800–437–1171

1-800-558-2040

1-800-682-5327 or 1-262-524-5698

1-800-321-7937

1-262-524-5698

Japan Support Center

Phone: [phone]
Fax: [phone]

Chapter 1 Introduction 1-19

GE HEALTHCARE PROPRIETARY TO GE
D

IRECTION 5344303-100, REVISION 2 VIVID P3 SERVICE MANUAL

1-5-2 System Manufacturer

Table 1-7 System Manufacturer

Manufacturer

Wipro GE Healthcare Pvt Ltd

No:4, Kadugodi Industrial Area,

Bangalore,

Karnataka,
INDIA - 560067.

TEL: [phone]
FAX: [phone]

1-20 Section 1-5 - Customer Assistance

GE HEALTHCARE PROPRIETARY TO GE
D

IRECTION 5344303-100, REVISION 2 VIVID P3 SERVICE MANUAL

Chapter 2
Pre Installation

Section 2-1 Overview

2-1-1 Purpose of this chapter 2

This chapter provides the information required to plan and prepare for the installation of a Vivid P3.
Included are descriptions of the facility and electrical needs to be met by the purchaser of the unit.

2-1-2 Chapter Contents

Table 2-8 Contents in Chapter 2

Section Description Page Number

2-1

2-2

2-3

Overview

General Console Requirements

Facility Needs

2-1

2-2

2-7

Chapter 2 Pre Installation 2-1

GE HEALTHCARE PROPRIETARY TO GE
D

IRECTION 5344303-100, REVISION 2 VIVID P3 SERVICE MANUAL

Section 2-2 General Console Requirements

2-2-1 Console Environmental Requirements

Table 2-9 Environmental Requirements for Vivid P3 Scanners

Operational Storage Transport

Temperature

Humidity

Pressure

Temperatures in degree C, conversion to degree F =(degree C*(9/5) + 32)

10 - 40 degree C
50-104 degree F

30 - 75%
non-condensing

700 - 1060hPa 700 - 1060hPa 700 - 1060hPa

10- 70 degree C
14- 158 degree F

30 -90%
non-condensing

-40- 60 degree C

-40- 140 degree F
30 - 90%

non-condensing

Table 2-10 Environmental Requirements for an Ultrasound Room

Item Values

Power Source

Radiation Shielding

Temperature

Humidity

Heat Dissipation

Floor Landing

Floor Condition

Weight

Refer to Table 2-11 on page 2-3.
NONE REQUIRED for ULTRASOUND ENERGY
20-26 DEG. C (68-79 DEG F) for PATIENT COMFORT
50% to 70% for PATIENT COMFORT
1366 BTU/Hr.

Approximately 680 - 800 kg/m2 without Accessories
Gradient: WITHIN 5 degrees
80 kg (176lbs) without Accessories

2-2-1-1 Cooling

The cooling requirement for the Vivid P3 is 1366 BTU/hr. This figure does not include cooling needed
for lights, people, or other equipment in the room. Each person in the room places an additional 300
BTU/hr. demand on the cooling system.

2-2-1-2 Lighting

Bright light is needed for system installation, updates and repairs. However, operator and patient
comfort may be optimized if the room light is subdued and indirect. Therefore a combination lighting
system (dim/bright) is recommended. Keep in mind that lighting controls and d iameters can be a source
of EMI which could degrade image quality. These controls should be selected to minimize possible
interface.

2-2 Section 2-2 - General Console Requirements

GE HEALTHCARE PROPRIETARY TO GE
D

IRECTION 5344303-100, REVISION 2 VIVID P3 SERVICE MANUAL

2-2-2 Electrical Requirements

NOTE: GE Healthcare requires a dedicated power and ground fo r the proper operation of its

Ultrasound equipment. This dedicated power shall originate at the last distribution panel before
the system.

Sites with a mains power system with defined Neutral and Live:

The dedicated line shall consist of one phase, a neutral (not shared with any other circuit), and a full
size ground wire from the distribution panel to the Ultrasound outlet.

Sites with a mains power system without a defined Neutral:

The dedicated line shall consist of one phase (two lines), not shared with any other circuit, and a full
size ground wire from the distribution panel to the Ultrasound outlet.

Please note that image artifacts can occur, if at any time within the facility, the ground from the main
facility's incoming power source to the Ultrasound unit is only a conduit.

2-2-2-1 Vivid P3 Power Requirements

Table 2-11 Electrical Specifications for Vivid P3

PARAMETER AREA LIMITS

Voltage Range

100-120V

220-240V 230 VAC ±10% (207-253 VAC)
Power All applications MAX. 425VA
Line Frequency All applications 50/60Hz (±2Hz)

Power Transients All applications

Decaying Oscillation All applications

100 VAC

Less than 25% of nominal peak voltage
for less than 1 millisecond for any type of
transient, including line frequency,
synchronous, asynchronous, or
aperiodic transients.

Less than 15% of peak voltage for less
than 1 millisecond.

± 10% (90-110 VAC)

Chapter 2 Pre Installation 2-3

GE HEALTHCARE PROPRIETARY TO GE
D

IRECTION 5344303-100, REVISION 2 VIVID P3 SERVICE MANUAL

2-2-2-2 Inrush Current

Inrush current is not a factor to consider due to the inrush current limiting properties of the power
supplies.

2-2-2-3 Site Circuit Breaker

It is recommended that the branch circuit breaker for the machine be readily accessible.

2-2-2-4 Site Power Outlets

A dedicated AC power outlet must be within reach of the unit without extension cords. Other adequate
outlets for the external peripherals, medical and test equipment needed to support this unit must also
be present within 1 m (3.2 ft.) of the unit. Electrical insta llatio n mus t meet all curr en t loca l, sta te, an d
national electrical codes.

2-2-2-5 Unit Power Plug

If the unit arrives without a power plug, or with the wrong plug, you must contact your GE dealer or the
installation engineer must supply what is locally required.

2-2-2-6 Power Stability Requirements

Voltage drop-out

Max 10 ms.

Power Transients

(All applications)
Less than 25% of nominal peak voltage for less than 1 millisecond for any type of transient, including

line frequency, synchronous, asynchronous, or aperiodic transients.

2-4 Section 2-2 - General Console Requirements

GE HEALTHCARE PROPRIETARY TO GE
D

IRECTION 5344303-100, REVISION 2 VIVID P3 SERVICE MANUAL

2-2-3 EMI Limitations

Ultrasound machines are susceptible to Electromagnetic Interference (EMI) from radio frequencies,
magnetic fields, and transient in the air wiring. They also generate EMI. The Vivid P3 co mplies with
limits as stated on the EMC label. However there is no guarantee that interface will not occur in a
particular installation.

Possible EMI sources should be identified before the unit is installed.
Electrical and electronic equipment may produce EMI unintentionally as the result of defect.
These sources include:

• medical lasers,

• scanners,

• cauterizing guns,

•computers,

•monitors,

• fans,

• gel warmers,

• microwave ovens,

• light dimmers,

• portable phones.

•Lift
The presence of a broadcast station or broadcast van may also cause interference.

See Table 2-12 for EMI Prevention tips.

Table 2-12 EMI Prevention/abatement

EMI Rule Details

Keep the unit at least 5 meters or 15 feet away from other EMI sources. Special shielding

Be aware of RF sources

Ground the unit

Replace all screws, RF
gaskets, covers, cores

Replace broken RF gaskets

Do not place labels where RF
gaskets touch metal

Use GE specified harnesses
and peripherals

Take care with cellular phones Cellular phones may transmit a 5 V/m signal; that could cause image artifacts.

may be required to eliminate interference problems caused by high frequency, high
powered radio or video broadcast signals.

Poor grounding is the most likely reason a unit will have noisy images. Check grounding of
the power cord and power outlet.

After you finish repairing or updating the system, replace all covers and tighten all screws.
Any cable with an external connection requires a magnet wrap at each end. Install the
shield over the front of card cage. Loose or missing covers or RF gaskets allow radio
frequencies to interfere with the ultrasound signals.

If more than 20% or a pair of the fingers on an RF gasket are broken, replace the gasket.
Do not turn on the unit until any loose metallic part is removed.

Never place a label where RF gaskets meet the unit. Otherwise, the gap created will permit
RF leakage. Or, if a label has been found in such a position, move the label.

The interconnect cables are grounded and require ferrite beads and other shielding. Also,
cable length, material, and routing are all important; do not change from what is specified.

Properly dress peripheral
cables

Do not allow cables to lie across the top of the card cage or hang out of the peripheral bays.
Loop the excess length for peripheral cables inside the peripheral bays. Attach the monitor
cables to the frame.

Chapter 2 Pre Installation 2-5

GE HEALTHCARE PROPRIETARY TO GE
D

IRECTION 5344303-100, REVISION 2 VIVID P3 SERVICE MANUAL

2-2-4 Scan Probe Environmental Requirements

Operation:10° to 40° C
Storage: 10° to 70° C

NOTE: Temperature in degrees C. Conversion to Degrees F = (Degrees C * (9/5) + 32).

NOTICE

SYSTEMS AND ELECTRONIC PROBES ARE DESIGNED FOR STORAGE TEMPERATURES OF

-20 TO + 50 degrees C. WHEN EXPOSED TO LARGE TEMPERATURE VARIATIONS, THE
PRODUCT SHOULD BE KEPT IN ROOM TEMPERATURE FOR 10 HOURS BEFORE USE.

2-2-5 Time and Manpower Requirements

Site preparation takes time. Begin Pre-installation checks as soon as possible. If possible, allow six
weeks before delivery, for enough time to make necessary changes.

CAUTION

Have two people available to deliver and unpack the Vivid P3.
Attempts to move the unit considerable distances or on an incline by one person could result
in injury or damage or both.

2-6 Section 2-2 - General Console Requirements

GE HEALTHCARE PROPRIETARY TO GE
D

IRECTION 5344303-100, REVISION 2 VIVID P3 SERVICE MANUAL

Section 2-3 Facility Needs

2-3-1 Recommended Ultrasound Room Layout

2-3-1-1 Purchaser Responsibilities

The work and materials needed to prepare the site is the responsibility of the purchaser. Delay,
confusion, and waste of manpower can be avoided by comple ting pre installation work before d elivery.
User the Pre Installation checklist to verify that all needed steps have been taken,
Purchaser reasonability includes:

• Procuring the materials required.

• Completing the preparations before de livery of th e ultr a so un d sys tem .

• Paying the costs for any alternations and modifications not specifically provided in the sales
contract.

NOTE: All electrical installation that are preliminary to the positioning of the equipment at the site

prepared for the equipment must be performed by licensed electrical contractors. Other
connections between pieces of electrical equipment, products involved (and the accompanying
electrical installations) are highly sophisticated and special engineering competence is
required. All electrical work on these product must comply with the requirements of applicable
electrical codes. The purchaser of GE equipment must only utilize qualified personnel to
perform electrical servicing on the equipment.

The desire to use a non-listed or customer provided product or to place an approved product further
from the system than the interface kit allows pres ents challenges to the installation team. To avoid
delays during installation, such variances should be made known to the in dividuals or group performing
the installation at the earliest possible date (preferable prior to purchase).
The ultrasound suite must be clean prior to delivery of the machine. Carpet is not recommended
because it collects dust and creates static. Potential sources of EMI (electromagnetic interference)
should also be investigated before delivery. Dirt, static, and EMI can negatively impact system.

Chapter 2 Pre Installation 2-7

GE HEALTHCARE PROPRIETARY TO GE
D

IRECTION 5344303-100, REVISION 2 VIVID P3 SERVICE MANUAL

2-3-2 Required Features

NOTE: GE Health Care Systems requires a dedicated power and ground for the proper oper ation of its

Ultrasound equipment. This dedicated power shall originate at the last distribution panel before
the system.

Sites with a mains power system with defined Neutral and Live:

The dedicated line shall consist of one phase, a neutral (not shared with any other circuit), and a full
size ground wire from the distribution panel to the Ultrasound outlet.

Sites with a mains power system without a defined Neutral:

The dedicated line shall consist of one phase (two lines), not shared with any other circuit, and a full
size ground wire from the distribution panel to the Ultrasound outlet.

Please note that image artifacts can occur, if at any time within the facility, the ground from the main
facility's incoming power source to the Ultrasound unit is only a conduit.

• Dedicated single branch power outlet of adequate amperage meeting all local and national codes
which is located less than 2.5 m (8 ft.) from the unit’s proposed location

• Door opening is at least 76 cm (30 in) wide

• Proposed location for unit is at least 0.3m (1 ft.) from the wall for cooling

• Power outlet and place for any external peripheral are within 2 m (6.5 ft.) of each other with
peripheral within 1 m of the unit to connect cables.

• Power outlets for other medical equipment and gel warmer

• Power outlets for test equipment and modem within 1 m (3.2 ft.) of unit

• Clean and protected space to store transducers (in their cases or on a rack)

• Material to safely clean probes (done with a plastic container, never metal)

2-3-3 Desirable Features

• Door is at least 92 cm (3 ft.) wide

• Circuit breaker for dedicated power outlet is easily accessible

• Sink with hot and cold water

• Receptacle for bio–hazardous waste, like used probe sheaths

• Emergency oxygen supply

• Storage for linens and equipment

• Nearby waiting room, lavatory, and dressing room

• Dual level lighting (bright and dim)

• Lockable cabinet ordered by GE for its software and proprietary manuals.

2-8 Section 2-3 - Facility Needs

GE HEALTHCARE PROPRIETARY TO GE
D

IRECTION 5344303-100, REVISION 2 VIVID P3 SERVICE MANUAL

2-3-3-1 Recommended and Alternate Ultrasound Room Layout

Recommended standard floor plan and a minimal floor plan for ultrasound equipment:

Figure 2-5 RECOMMENDED ULTRASOUND ROOM LAYOUT

Chapter 2 Pre Installation 2-9

GE HEALTHCARE PROPRIETARY TO GE
D

IRECTION 5344303-100, REVISION 2 VIVID P3 SERVICE MANUAL

2-3-4 Networking Pre-installation Requirements

2-3-4-1 Stand Alone Scanner (without Network Connection)

None.

2-3-4-2 Scanner Connected to Hospital’s Network

Supported networks:

2-3-4-3 Purpose of DICOM Network Function

DICOM services provide the operator with clinically useful features for moving images and patient
information over a hospital network. Examples of DICOM services include the transfer of images to
workstations for viewing or transferring images to remote printers. As an added benefit, transferring
images in this manner frees up the on-board moni tor and peripherals, enabling viewing to be don e while
scanning continues. With DICOM, images can be archived, stored, and retrieved faster, easier, a nd at
a lower cost.

2-3-4-4 DICOM Option Pre-installation Requirements

To configure the Vivid P3 to work with other network conn ections, the site’s network administrator must
provide some necessary information.

Information must include:

• A host name, local port number, AE Title, IP address and Net Mask for the Vivid P3.

• The IP addresses for the default gateway and other routers at the site for ROUTING
INFORMATION.

• The host name, IP address, port and AE Title for each d evice the site wants connected to the

for DICOM APPLICATION INFORMATION. A field for the make (manufacturer) and the revision

P3

of the device, is also included. This information may be useful for solving errors.

Vivid

2-10 Section 2-3 - Facility Needs

GE HEALTHCARE PROPRIETARY TO GE
D

IRECTION 5344303-100, REVISION 2 VIVID P3 SERVICE MANUAL

2-3-4-4 DICOM Option Pre-installation Requirements (cont’d)

.

Vivid P3

Host Name

AE Title

ROUTING INFORMATION

ROUTER1
ROUTER2
ROUTER3

DICOM APPLICATION INFORMATION

NAME

Store 1

Store 2

Store 3

Local Port

Destination
IP Addresses

...
...
...

MAKE/REVISION IP ADDRESSES PORTAE TITLE

IP Address

Net Mask

Default

...

...

GATEWAY IP Addresses

...

...
...
...

...

...

...

Store 4

Store 5

Store 6

Worklist

Storage
Commit

MPPS

...

...

...

...

...

...

Figure 2-6 Worksheet for DICOM Network Information

Chapter 2 Pre Installation 2-11

GE HEALTHCARE PROPRIETARY TO GE
D

IRECTION 5344303-100, REVISION 2 VIVID P3 SERVICE MANUAL

This page was intentionally left blank.

2-12 Section 2-3 - Facility Needs

GE HEALTHCARE PROPRIETARY TO GE
D

IRECTION 5344303-100, REVISION 2 VIVID P3 SERVICE MANUAL

Chapter 3
Installation

Section 3-1 Overview

3-1-1 Purpose of Chapter 3

This chapter contains information needed to install the unit. Included are references to a procedure that
describes how to receive and unpack the equipment and how to file a damage or loss claim.
How to prepare the facility and unit of the actual installation, and how to check and test the unit, probes,
and external peripherals for electrical safety are inclu ded in this procedure. Also included in this section
are guidelines for transporting the unit to a new site.

Table 3-13 Contents in Chapter 3

Section Description Page Number

3-1

3-2

3-3

3-4

3-5

3-6

3-6-6

3-7

3-8

3-9

3-10

Overview

Receiving and Unpacking the Equipment

Packing the Equipment

Preparing for Installation

Completing the Installation

System Configuration

Software/Option Configuration

Connectivity Installation Worksheet

Loading Base Image Software

Software Version check out

Paperwork

3-1-2 Average Installation Time

Table 3-14 Average Installation Time

Description Average Installation Time Comments

3-1

3-3

3-8

3-9

3-10

3-14

3-26

3-27

3-28

3-29

3-30

Unpacking the scanner
Scanner /options
DICOM Option

Approximately 0.5 hour
Approximately 0.5 hour

30 minutes

Dependent on the configuration that is required
Dependent on the amount of configuration

The VIVID P3 installation and functional checkout will take approximately Four hour. VIVID P3 consoles
with optional equipment may take slightly longer.

Chapter 3 Installation 3-1

GE HEALTHCARE PROPRIETARY TO GE
D

IRECTION 5344303-100, REVISION 2 VIVID P3 SERVICE MANUAL

3-1-3 Installation Warnings

11.)Since the VIVID P3 weighs approximately 80 kg (176 lbs)without options, preferably two people
should unpack it. Two people are also preferable for installing any additional bulky items.

12.)There are no operator serviceable components. To prevent shock, do not remove any covers or
panels. Should problems or malfunctions occur, unplug the power cord. Only qualified service
personnel should carry out servicing.

NOTE: For information regarding packing labels, refer to LABELS ON PACKAGE.

13.)After being transported, the unit may be very cold or hot. If this is the case, allow the unit to
acclimate before you turn it on. It requires one hour for each 2.5×C increment it's temperature is
below 10×C or above 40×C.

DANGER

Equipment damage possibility. Turning the system on without acclimation after arriving at site
may cause the system to be damaged.

Table 3-15 Time for Settlement

60 55 50 45 40 35 30 25 20 15 10 5 0 -5 -10 -15 -20 -25 -30 -35 -40

°C

140 131 122 113 104 96 86 77 68 59 50 41 32 23 14 5 -4 -13 -22 -31 -40

°F

864200000002468101214161820

hrs

3-1-4 Safety Reminders

DANGER

WHEN USING ANY TEST INSTRUMENT THAT IS CAPABLE OF OPENING THE
AC GROUND LINE (I.E., METER’S GROUND SWITCH IS OPEN), DON’T TOUCH
THE UNIT!

CAUTION

DANGER

DANGER

If the unit is very cold or hot, do not turn on its power until it has had a chance to acclimate to
its operating environment.

To prevent electrical shock, connect the unit to a properly grounded power outlet. Do not use a
three to two prong adapter. This defeats safety grounding.

Do not operate this unit unless all board covers and frame panels are securely in place.System
performance and cooling require this.

DANGER

OPERATOR MANUAL(S)
The User Manual(s) should be fully read and understood before operating the VIVID P3 and kept
near the unit for quick reference.

DANGER

ACOUSTIC OUTPUT HAZARD
Although the ultrasound energy transmitted from the VIVID P3 probe is within FDA limits, avoid
unnecessary exposure. Ultrasound energy can produce heat and mechanical damage

3-2 Section 3-1 - Overview

GE HEALTHCARE PROPRIETARY TO GE
D

IRECTION 5344303-100, REVISION 2 VIVID P3 SERVICE MANUAL

Section 3-2 Receiving and Unpacking the Equipment

When a new system arrives, check that any components are not damaged and ar e not in short supply.
If shipping damage or shortage occurs, contact the address shown in Chapter 1.

The Packaging/Unpacking Procedure.
Topics discussed in the Packaging/Unpacking Procedure:

1.) Check the Shipment,

2.) Unpack the Unit,

3.) Handling Incomplete or Damaged Shipment

Please read these procedures before packing/unpacking the VIVID P3.
We strongly advice you to store the VIVID P3 packing material in undamaged condition in case of future

transportation.

Do not lift the unit by the Keyboard. This may cause equipment damage.

CAUTION

The crate with the VIVID P3 weighs approximately 80 kg. Be prepared for a sudden shift of weight
as the unit is removed from its base (pallet).

CAUTION

CAUTION

Inspect the Shcik watch and Tilt watch. Ensure that they are not fused. (Refer to the instructions
attached on the packing Box on howto check the Shcik watch and Tiltwatch)

1.) Cut the two Metal Bands.

Figure 3-7 Cutting the two metal bands.

Chapter 3 Installation 3-3

GE HEALTHCARE PROPRIETARY TO GE
D

IRECTION 5344303-100, REVISION 2 VIVID P3 SERVICE MANUAL

Section 3-2 Receiving and Unpacking the Equipment (cont’d)

2.) Lift the TOP Cover up and off.

Figure 3-8 Remove the top cover

3.) Remove the Monitor Cap up and off...

Monitor Cap

Figure 3-9 Removing the Monitor Cap

3-4 Section 3-2 - Receiving and Unpacking the Equipment

GE HEALTHCARE PROPRIETARY TO GE
D

IRECTION 5344303-100, REVISION 2 VIVID P3 SERVICE MANUAL

Section 3-2 Receiving and Unpacking the Equipment (cont’d)

4.) Remove the three Plastic Joints from the Outer Slee ve.(Refer to the Labels on the Packing Box for
more detailed instructions)

5.) Remove the Outer Sleeve.

6.) Remove the Inner Sleeve.

Inner Sleeve

Plastic Joint

Palette Assy

Figure 3-10 Removing Plastic Joints and Sleeves

Chapter 3 Installation 3-5

GE HEALTHCARE PROPRIETARY TO GE
D

IRECTION 5344303-100, REVISION 2 VIVID P3 SERVICE MANUAL

Section 3-2 Receiving and Unpacking the Equipment (cont’d)

TM

7.) Remove the Plastic Wrapping around the VIVID

8.) Remove the Monitor Support and Monitor Packing.

9.) Remove the adhesive tapes attached at the four corners of the Top Cover.

10.)Put the Ramp Board on floor and prepare the slope to put the console down.

11.)Unlock the brakes on the front castors, then carefully put the conso le off the Palette.

P3.

Figure 3-11 Removing System from the Pallete

3-6 Section 3-2 - Receiving and Unpacking the Equipment

GE HEALTHCARE PROPRIETARY TO GE
D

IRECTION 5344303-100, REVISION 2 VIVID P3 SERVICE MANUAL

Section 3-2 Receiving and Unpacking the Equipment (cont’d)

NOTE: Check the shipping container for special instructions. Verify that the container is intact. In some

cases a secondary container may be used. If so, ask the carrier for unpacking instructions.

Figure 3-12 Labels on Package

CAUTION

Please carefully unpack the system, and do not dispose the package of VIVID P3, so that it can
be reused for service.

3-2-1 Moving into Position

CAUTION

CAUTION

In general, a single adult can move the VIVID P3 along an ev en surface with no steep grades. At least two people should
move the machine when large humps, grooves, or grades are encountered. (It is better to pull fro m the rear rather th an
push from the front of the unit). Before moving, store all loose parts in the unit. Wrap transducers in soft cloth or foam
to prevent damage.

Do not lift the unit by the keyboard. Use handle to move system.Do not tilt the unit more than 5
degrees to avoid tipping it over.

Equipment Damage Possibility. Lifting the console by holding covers may damage the covers.
Do not lift the console by holding any covers.

Although VIVID P3 is a compact and mobile machine, two people should move it over rough surfaces
or up and down grades.

3-2-2 Adjusting System Clock

Set the system clock for the VIVID P3 to the local time. For procedure of adjusting the system cloc k,
refer to 4-5 Software Configuration Checks, in Chapter 4, FUNCTIONAL CHECKS.

3-2-3 Product Locator Installation Card

Fill out proper customer Information on the Product Locator Installation Card. Mail this Installation Card
“Product Locator” to the address corresponding to your pole.

Chapter 3 Installation 3-7

GE HEALTHCARE PROPRIETARY TO GE
D

IRECTION 5344303-100, REVISION 2 VIVID P3 SERVICE MANUAL

NOTE: The Product Locator Installation Card shown may not be same as the provided Product Locator

card.

PRODUCT LOCATOR INSTALLATION CARD

Section 3-3 Packing the Equipment

Please pack VIVID P3 in the reverse order of unpacking.

3-8 Section 3-3 - Packing the Equipment

GE HEALTHCARE PROPRIETARY TO GE
D

IRECTION 5344303-100, REVISION 2 VIVID P3 SERVICE MANUAL

Section 3-4 Preparing for Installation

3-4-1 Verify Customer Order

Compare items received by the customer to that which is listed on the delivery order. Report any items
that are missing, back ordered or damaged.

3-4-2 Physical Inspection

3-4-2-1 System Voltage Settings

• Verify that the scanner is set to the correct voltage. The Voltage ratings for the VIVID P3 Scanner
is found on Rating label near the Circuit Breaker at the rear of the system

WARNINGWARNING

Connecting a VIVID P3 scanner to the wrong voltage level will most likely destroy the
scanner.

3-4-3 EMI Protection

This Unit has been designed to minimize the effects of Electro Magnetic Interference (EMI). Many of the
covers, shields, and screws are provided primarily to protect the system from image artifacts caused by
this interference. For this reason, it is imperative that all covers and hardware are installed and secured
before the unit is put into operation.

3-4-4 Checking the Components

When a new system arrives, check that none of the components are damaged or in short supply. If
shipping damage or shortage occurs, contact the address shown in Chapter 1.

CAUTION

CAUTION

If the Power Plug is Modified or replaced to Suit the local Conditions and regulations, Ground
continuity check should be performed between Ground Pin on the Plug and the Metal Part on
the VIVID P3. Refer Section Chapter 10 for more details.

Chapter 3 Installation 3-9

GE HEALTHCARE PROPRIETARY TO GE
D

IRECTION 5344303-100, REVISION 2 VIVID P3 SERVICE MANUAL

Section 3-5 Completing the Installation

3-5-1 Power On / Boot Up

NOTE: After turning off a system, wait at least ten seconds before turning it on again. The system may not be

able to boot if power is recycled too quickly.

3-5-1-1 Scanner Power On

1.) Connect the Power Cable to the back of the system.

2.) Ensure the Cable Clip slips securely over the shoulders on the molded plug.

3.) Connect the Main Power Cable to a hospital grade power receptacle with the proper rate d voltage.
Never use an adapter that would defeat the safety ground.

4.) Switch ON the Circuit Breaker at the rear of the system.

a. Circuit Breaker
b. Power Cable

When power is applied to the scanner and the rear Circuit Breaker is turn ed ON, power is distributed to
the Transformer Assembly and to the TMST.

3-10 Section 3-5 - Completing the Installation

GE HEALTHCARE PROPRIETARY TO GE
D

IRECTION 5344303-100, REVISION 2 VIVID P3 SERVICE MANUAL

3-5-1-2 Turn on the system

Press the Power On/Off switch at the front of the system once.

Power On/Off switch

Figure 3-13 Power On/Off Switch

When the Power On/Off switch on the Control Panel is pressed once, the

TMST starts and the software code is distributed to initiate the scanner.
No status messages are displayed during this process.

3-5-2 Power Off/ Shutdown

NOTE: After turning off a system, wait at least ten seconds before turning it on again. The system may not be

able to boot if power is recycled too quickly.

3-5-2-1 TMST Power Down

To power down the system:

1.) Press the Power On/Off switch at the front of the system.

Chapter 3 Installation 3-11

GE HEALTHCARE PROPRIETARY TO GE
D

IRECTION 5344303-100, REVISION 2 VIVID P3 SERVICE MANUAL

2.) The System-Exit window is displayed.

Figure 3-14 System Exit Window

3.) Using the Trackball or Select key, select Shutdown.

4.) The shutdown process takes a few seconds and is complete when the power status LED is turned
Amber color.

5.) Disconnect the probes.Clean or disinfect all probes as necessary. Store them in their shipping
cases to avoid damage.

3-5-2-2 Scanner Shutdown

1.) Switch OFF the Circuit Breaker at the back of the system.

2.) Disconnect the Mains Power Cable if necessary. For example: Relocating the scanner.

3-12 Section 3-5 - Completing the Installation

GE HEALTHCARE PROPRIETARY TO GE
D

IRECTION 5344303-100, REVISION 2 VIVID P3 SERVICE MANUAL

3-5-3 Transducer Connection

1.) Connect a transducer to the upper transducer receptancle as follows:
A.) Ensure that the transducer twist lock lever points towards the 9 o’clock position.

B.) Insert the transducer connector on the receptacle guide pi n until it touches the receptacle mating

surface.

C.) Twist the transducer twist lock lever to the 2 o’clock position to lock it in place. Twist the lever to

the 9 o’clock position to disconnect the transducer.

NOTE: Please ensure that the probe latch is in unlocked position before you connect the probe to the system.

Fig (A) Connecting the Probe Fig (B) Locking the Probe Lever

Figure 3-15 Connect the probe

NOTE: It is not necessary to turn OFF power to connect or disconn e c t a pr ob e.

Chapter 3 Installation 3-13

GE HEALTHCARE PROPRIETARY TO GE
D

IRECTION 5344303-100, REVISION 2 VIVID P3 SERVICE MANUAL

Section 3-6 System Configuration

3-6-1 System Specifications

3-6-1-1 Physical Dimensions

The physical dimensions of the VIVID P3 console are summarized in Figure 3-16 on page 3-14 .

Table 3-16 Physical Dimensions of VIVID P3

Height Width Depth Unit

1347 445 595 mm

53.0 17.5 23.4 inches

Figure 3-16 Overall Dimensions

3-14 Section 3-6 - System Configuration

GE HEALTHCARE PROPRIETARY TO GE
D

IRECTION 5344303-100, REVISION 2 VIVID P3 SERVICE MANUAL

3-6-2 Approved peripherals

Table 3-17 Approved peripherals

Device Manufacturer Model Interface

B/W Printer SONY UP-D897 USB
B/W Printer Mitsubishi P93D USB

Digital Color Printer SONY UP-D23MD USB

HP HP Officejet Pro K550 USB

HP Color Printer

3-pedal footswitch Steute MKF 2-MED GP26 USB

USB Memory SanDisk SanDisk 1GB USB

ECG ECG Module ECG-USB1 USB

USB HDD Iomega USB HDD 160GB USB

HP HP Laser Jet P2015dn USB
HP HP Office jet Pro K5400 USB
HP HP Deskjet 460 USB

Chapter 3 Installation 3-15

GE HEALTHCARE PROPRIETARY TO GE
D

IRECTION 5344303-100, REVISION 2 VIVID P3 SERVICE MANUAL

3-6-3 Connecting Cables

WARNINGWARNING

Equipment damage possibility. Be sure to use the following recommended connecting cables to
connect recording devices and a network with VIVID P3 console.

Table 3-18 List of Connecting Cables

Name Figure NOTE

USB Cable

USB Cable For USB Printer

3-6-4 Peripherals/Accessories Connector Panel

VIVID P3 peripherals and accessories can be properly connected using the Rear panel.

3-6-4-1 Rear Panel Connector

Located on the Rear panel are USB Ports, VGA,S-Video,Compo site Out, ethernet port & Power out let.

For USB ECG

Figure 3-17 Rear Panel

A.) USB ports for printers & ECG (B/W, Color and USB),Memory Stick, Footswitch, DVD-RW,

USB HDD.
B.) Ethernet port
C.) VGA Output
D.) S-Video Out
E.) Composite video out
F.) Power outlet

3-16 Section 3-6 - System Configuration

GE HEALTHCARE PROPRIETARY TO GE
D

IRECTION 5344303-100, REVISION 2 VIVID P3 SERVICE MANUAL

3-6-4-2 TOP Panel Connector

Located on the Top Right side panel are one USB Port for contro l connections for printer , USB Thumb
Drive and service tools .)

Figure 3-18 Left Side Panel

NOTICE

The USB devices should be connected to VIVID P3 first, power on USB devices before turning VIVID
P3 to work.

NOTE: Each outer (case) ground line of peripheral/accessory connectors are protectively grounded.

Chapter 3 Installation 3-17

GE HEALTHCARE PROPRIETARY TO GE
D

IRECTION 5344303-100, REVISION 2 VIVID P3 SERVICE MANUAL

3-6-4-3 This section indicates the pin assignment for each connector.

1. S- Video Connector: 4 Pin, mini-Din

Table 3-1 S-Video Connector, 4 Pin

Pin No Output Signal Description Picture

1 SVIDEO OUT/IN YG Y (Luma) GND
2 SVIDEO OUT/IN CG C (Chroma) GND
3 SVIDEO OUT/IN Y Y (Luma) SIGNAL

4 SVIDEO OUT/IN C C (Chroma) SIGNAL

2. Pin Assignment of USB

Table 3-2 Pin assignment of USB1

Pin No. Signal Pin No. Signal

1 +5VDC 3 DATA+

2 DATA- 4 GND

Table 3-3 Pin assignment of USB2

Pin No. Signal Pin No. Signal

1 +5VDC 3 DATA+

2 DATA- 4 GND

3-18 Section 3-6 - System Configuration

GE HEALTHCARE PROPRIETARY TO GE
D

IRECTION 5344303-100, REVISION 2 VIVID P3 SERVICE MANUAL

3-6-4-4 Connect peripherals

A.) Connecting B/W printer UP-D897,Mitsubishi P93D or Color printer UP-D23MD to the system.

Only B/W Printer UP-D897 can be mounted in Front Utility area tray as shown in fig below.

Fig (A)

VGP Tray Bottom

B.) Mount the Sony UP-D897 printer to the VGP-UP-D 897-Mounting-Bracket using Four M3 x 8

Fig (B)

VGP Tray top

Using two Captive fastener mount
VGP Tray bottom to the Sytem Utility
box.

Figure 3-19 Connect B/W printer Tray to the system

Chapter 3 Installation 3-19

GE HEALTHCARE PROPRIETARY TO GE
D

IRECTION 5344303-100, REVISION 2 VIVID P3 SERVICE MANUAL

screws as indicated below.

A- Indicates the location of the mounting holes on
the VGP-UP-D897-Mounting-Bracket

A

A

Rear
Side of

B

B

the
printer.

Front side

of the

AA

Printer

BB

VGP-UP897-Mounting-Bracket(5314101)

Rear Side of the Printer

Mounting the bracket to the printer by using M3X8 Screws

B-Indicates the location of the mounting holes on the
Printer.

Front Side Of
the Printer

Figure 3-20 Mounting of VGP Tray to Printer

3-20 Section 3-6 - System Configuration

GE HEALTHCARE PROPRIETARY TO GE
D

IRECTION 5344303-100, REVISION 2 VIVID P3 SERVICE MANUAL

C.) Insert or Slide the Sony UP-D897 B/W Printer with Bracket (Out come of Step A) in to the Tray

fixed on the System and than connect USB & Power cables in the rear side o fthe printer and push
back fully & Tighten the Front captive fastener as indicated in below fig.

Figure 3-21 Mounting The Sony UPD 897 on Vivid P3.

D.) Mounting Procedure for Color printer UP-D23MD connect the USB Cable to any of the usb ports

available on rear panel & connect the power cable to the rear panel Power port.

E.) Mounting procedure for Mitsubishi Black and White printer P93D printer connect the USB cable to

any of the usb ports available on rear panel & connect the power cable to the rear panel power port.
after connecting the USB cable a pop up window will appear in image mode asking for drivers, insert
the printer driver CD in the DVD drive and select the path from the pop up window, the selected
drivers will load and Config the printer from Utility>Connectivity>Service>Standard print select the
P93D.

Chapter 3 Installation 3-21

GE HEALTHCARE PROPRIETARY TO GE
D

IRECTION 5344303-100, REVISION 2 VIVID P3 SERVICE MANUAL

3-6-4-4 Connect peripherals (cont’d)

F.) Connect Foot Switch to the system.

Foot Switch can be properly connected to any USB Ports in the Rear panel.

USB Ports

Foot switch

Figure 3-22 Connect Foot Switch to the system

G.) Connecting S-Video cable to the system.
S-Video O/P is available on rear panel.

H.) Connecting the CRT to the system.

SVGA connector available on Rear panel.

I.) Connect the USB Memory stick to the system. The USB Memory stick can be properly connected

in top panel USB port or in any of the Rear panel USB Ports.

Figure 3-23 USB Memory Connection

J.) Connect the USB HDD to the system. The USB Harddisk can be properly connected to Rear Panel

USB ports.

NOTE: Please scan the devices (USB Pen Drive, HDD etc...) for virus - before using it with the

system"

3-22 Section 3-6 - System Configuration

GE HEALTHCARE PROPRIETARY TO GE
D

IRECTION 5344303-100, REVISION 2 VIVID P3 SERVICE MANUAL

K.) Connect the Color printer HP Laser jet P2015/ HP Officejet Pro K550/K5400/460 to the system. The

USB Cable & power cable can be properly connected to the USB Ports & Power Port in the Rear
panel.

Power Cable USB Cable USB Cable

Figure 3-24 Color Printer Connection on the rear panel

L.) Connect the external monitor to the system. The monitor can be properly connected using the VGA

port in the Rear panel.
Press Ctrl+Alt+V

on the keyboard, a dialog box appears.

Figure 3-25 Graphics Controller Properties

Power cable

Select Intel(R) Dual Display Clone
and select OK

.

Chapter 3 Installation 3-23

; check the Same display configuration driver on bo th display box

GE HEALTHCARE PROPRIETARY TO GE
D

IRECTION 5344303-100, REVISION 2 VIVID P3 SERVICE MANUAL

NOTE: Please refer to the operation manual of each peripheral for information needed by the user to

operate the system safely.

3-24 Section 3-6 - System Configuration

GE HEALTHCARE PROPRIETARY TO GE
D

IRECTION 5344303-100, REVISION 2 VIVID P3 SERVICE MANUAL

3-6-5 Available Probes

See in specification in the VIVID P3 User Reference Manual for Probes and intended use.

Table 3-4 List of Probes for Vivid P3

Probe Name Area of Using TYPE Catalog Number

4C GENERAL PURPOSE CONVEX H4904PC

E8CS

8C Abdomen, OB/GYN, Urology MICRO-CONVEX H40412LJ

TRANSVAGINAL

TRANSRECTAL

MICRO-CONVEX H44801HR

11L

8L

3S Cardiac, Transcranial SECTOR H4701SZ

5cs Abdomen, OB/GYN, Urology CONVEX H4001DC

6S Cardiac, Pediatric SECTOR

t739 INTRAOPERATIVE LINEAR H40212LM

Vascular, Small Parts,

SMALL PARTS

PERIPHERAL VASCULAR

LINEAR H40412LY

LINEAR H4001DB

H47082LR

Chapter 3 Installation 3-25

GE HEALTHCARE PROPRIETARY TO GE
D

IRECTION 5344303-100, REVISION 2 VIVID P3 SERVICE MANUAL

3-6-6 Software/Option Configuration

Refer to the VIVID P3 Basic User Manual, Chapter 16, Customizing Your System for information on
configuring items like Hospital, Department, Language, Units (of measure), Date, Time and Date
Format.

For information on configuring Software Options, Refe r to the VIVID P3 Basic User Manual, Chapter 16,
Customizing Your System.

For information on configuring DICOM Connectivity, Refer to the VIVID P3 Basic User Manual, Chapter
16, Customizing Your System.

NOTE: After Enabling the Software Option, Need to Reboot the system.

3-26 Section 3-6 - System Configuration

GE HEALTHCARE PROPRIETARY TO GE
D

IRECTION 5344303-100, REVISION 2 VIVID P3 SERVICE MANUAL

Section 3-7 Connectivity Installation Worksheet

Site System Information

Site:

Dept:

LOGIQ SN:

CONTACT INFORMATION

Name

TCP/IP Settings

Name - AE Title:

Type:

Title

Floor:

Room:

REV:

Phone

Comments:

E-Mail Address

IP Settings

IP Address:

Subnet Mask:

Default Gateway:

Services (Destination Devices)

Device Type

1
2
3
4
5
6
7
8
9
10
11
12

Manufacturer

Name

Remote Archive Setup

Remote Archive IP:

Remote Archive Name:

IP Address

Port

AE Title

Chapter 3 Installation 3-27

GE HEALTHCARE PROPRIETARY TO GE
D

IRECTION 5344303-100, REVISION 2 VIVID P3 SERVICE MANUAL

Section 3-8 Loading Base Image Software

This information has been moved, please refer to:

Section 8-13 "Loading Base Image Software" on page 8-86

3-28 Section 3-8 - Loading Base Image Software

GE HEALTHCARE PROPRIETARY TO GE
D

IRECTION 5344303-100, REVISION 2 VIVID P3 SERVICE MANUAL

Section 3-9Software Version check out

3-9-1 Functional Check-out

1.) Power on VIVID P3 scanner and wait until system booting to main screen.

2.) Press UTILITY

3.) Choose the About

key on control panel.

button on the right.

Figure 3-26 About

4.) Check whether "Software version" is the right version for use.

Figure 3-27 Software version

Chapter 3 Installation 3-29

GE HEALTHCARE PROPRIETARY TO GE
D

IRECTION 5344303-100, REVISION 2 VIVID P3 SERVICE MANUAL

Section 3-10 Paperwork

NOTE: During and after installation, the documentation (i.e. User Manuals, Installation Manuals...) for the

peripheral units must be kept as part of the original system documentation. This will ensure that all
relevant safety and user information is availa b le du rin g th e op er a tion and ser vice of th e com p let e
system.

3-10-1 Product Locator Installation

NOTE: The Product Locator Installation Card shown may not be same as the provided Product Locator

card.

Figure 3-28 Product Locator Installation Card

3-10-2 User Manual(s)

User Check that the correct User Manual(s) for the system and software revision, is included with the
installation. Specific language versions of the User Manual may also be available. Check with your GE
Sales Representative for availability.

3-30 Section 3-10 - Paperwork

GE HEALTHCARE PROPRIETARY TO GE
D

IRECTION 5344303-100, REVISION 2 VIVID P3 SERVICE MANUAL

Chapter 4
Functional Checks

Section 4-1 Overview

4-1-1 Purpose for Chapter 4

This chapter provides procedures for quickly checking major functions of the Vivid P3 console,
diagnostics by using the built-in service software, and power supply adjustments.

Section Description Page Number

4-1

4-2

4-3

4-4

4-5

Table 4-5 Contents in chapter 4

Section 4-2 Required Equipment

To perform these tests, you'll need any of the sector, linear, or convex transducers.
(normally you should check all the transducers used on the system)

Overview

Required Equipment

General Procedure

Software Configuration Checks

Peripheral Checks

4-1

4-1

4-2

4-40

4-40

Chapter 4 Functional Checks 4-1

GE HEALTHCARE PROPRIETARY TO GE
D

IRECTION 5344303-100, REVISION 2 VIVID P3 SERVICE MANUAL

Section 4-3 General Procedure

CAUTION

SYSTEM REQUIRES ALL COVERS
Operate this unit only when all board covers and frame panels are securely in place. The covers
are required for safe operation, good system performance and cooling purposes.

NOTICE

Lockout/Tagout Requirements (For USA only)
Follow OSHA Lockout/Tagout requirements by ensuring you are in total control of the Power Cable on

the system.

TAG

&

LOCKOUT

Date

Signed

4-3-1 Power On/Boot Up

After AC power cable is connected correctly to the transformer & Circiut breaker is switched on, the
power is applied to the scanner & the system is in Stand By mode. In the Control panel Power On/Of f
key will be Amber color.

4-3-1-1

Boot Up

In the control Panel press the power On/Off key the led color will turn in Green color & the system will
boot.

A.Circiut breaker
B.Power cable

Figure 4-29 connect AC adapter

4-2 Section 4-3 - General Procedure

GE HEALTHCARE PROPRIETARY TO GE
D

IRECTION 5344303-100, REVISION 2 VIVID P3 SERVICE MANUAL

4-3-1-1 Boot Up (cont’d)

When power is applied to the scanner, power is distributed to the Cooling Unit, Control Panel, LCD,
Peripherals and the Back-end Processor.

4-3-1-2 Turn on the system

Press the Power On/Off switch at the front of the system once.

Power On/Off switch

Figure 4-30 Power On/Off Switch

When the Power On/Off switch on the Control Panel is pressed once, the Back-end Processor starts
and the software code is distributed to initiate the scanner.

No status messages are displayed during this process.

4-3-2 Power Off/ Shutdown

NOTE: After turning off a system, wait at least ten seconds before turning it on again. The system may not be

able to boot if power is recycled too quickly.

4-3-2-1 TMST Power Down

To power down the system:

1.) Press the Power On/Off switch at the front of the system once.

2.) The System-Exit window is displayed.

Figure 4-1 System Exit Window

3.) Using the Trackball or Select key, select Shutdown.

Chapter 4 Functional Checks 4-3

GE HEALTHCARE PROPRIETARY TO GE
D

IRECTION 5344303-100, REVISION 2 VIVID P3 SERVICE MANUAL

4-3-2-1 TMST Power Down (cont’d)

4.) The shutdown process takes 15 seconds and the power off sequence is complete when the powe r
status LED is turned Amber.

5.) Disconnect the probes.Clean or disinfect all probes as necessary. Store them in their shipping
cases to avoid damage.

4-3-2-2 Scanner Shutdown

Disconnect the Mains Power Cable is necessary. For example: Relocating the scanner.

CAUTION

DO NOT unplug and/or transport the unit until after the power off sequence has been completed.
Failure to do so may result in corrupted patient files.

4-4 Section 4-3 - General Procedure