
GE
Lighting
Roadway Lighting
M-400 Induction with Cutoff Optics (MSCL)
imagination at work

Product Features
From HID to LED, GE continues to push Roadway Lighting to new heights. Recognized for the highest
quality and reliability in street, highway, parkway, and commercial applications, GE offers a wide selection
of styles to meet the lighting needs of municipalities, utilities, DOT customers and more.
Applications
• For roadway, highway or parking lot applications
where light trespass could be a problem
Housing
• Die-cast aluminum housing.
• External paddle type stainless steel bail latch
Finish
• Polyester powder gray paint finish
Ratings
• Listed for wet location available as an option
/
Mounting
• Universal two-bolt slipfitter
Electrical
Unique Features
• Average lamp life 100,000 hours
• Instant on and instant restrike
• Minimum start -30°F
• Lamp included
• Cutoff photometrics
• True 90° cutoff – no light above 90° (meets RP8-2000
for full cutoff) with flat glass
• “Dead back” tunnel type FRP terminal board
• No-tool PE receptacle
• Integral Surge Protection
• Non-Dimming:
— For 120-277 VAC PER 1 EEE (ANSI C62.41.-1991,
4KV/2KA location category B2 (120 events)

Ordering Number Logic
M-400 Induction with Cutoff Optics (MSCL)
E 1
_ _ _ _ _ _ _ _ _ _ _ _ _ _
PROD. ID
MSCL =
M-400 with
Cutoff* Optics
2-Bolt
Slipfitter
* = Previously
IESNA Full
Cutoff Optics
WAT TAG E
LIGHT SOURCE
10T = 100W Tubular
Circular Induction
Lamp
15T = 150W Tubular
Circular Induction
Lamp**
63Q = 165W Twist Base
Bulb Induction
Lamp (3000K)
64Q = 165W Twist Base
Bulb Induction
Lamp (4000K)
83Q = 85W Twist Base
Bulb Induction
Lamp (3000K)
84Q = 85W Twist Base
Bulb Induction
Lamp (4000K)
**15T must use the G(Shallow
Sag Glass Globe) lens type only
Note: All Induction lamps are
supplied
VOLTAGE
60Hz
0 = 120/208/240/
277 Multivolt
1 = 120
2 = 208
3 = 240
4 = 277
5 = 480
G = 200-277
BALLAST
TYPE
SELECTION
See Ballast
Selection Table
E = Induction
Ballast
PE
FUNCTION
1 = None
2 = PE Receptacle
NOTE: Receptacle
connected same
voltage as unit
except as noted.
Order PE Control
separately.
Ballast Selection Table
Ballast Type/Voltage
Light 200Wattage Source Multivolt 120 208 240 277 480 277
85 Q
100 T
150 T
60Hz
IND
N/A E E E E N/A E
IND
E E E E E N/A N/A
IND E
E E E E N/A N/A
IGNITOR
MOUNTING
1 = None F = Flat Glass
LENS
TYPE
G = Shallow Sag
Glass Globe
IES DISTRIBUTION
TYPE
See Photometric
Selection Table
S = Short
C = Cutoff*
2 = Type II
3 = Type III
* = Previously IESNA
Full Cutoff Optics
OPTIONS
C = Charcoal Filtered Optics
F = Fusing (Not available
with multivolt)
Photometric Selection Table
PHOTOMETRIC SELECTION TABLE
CLEAR REFRACTORS. All light sources are clear.
IES Distribution Type
Photometric Curve Number 35–
Flat Glass “F” Sag Glass “G”
Light
Wattage Source SC2 SC3 SC2 SC3
85Q IND N/A 453614 N/A N/A
165Q IND N/A 454388 N/A 454387
100T IND 452870 N/A N/A N/A
150T IND N/A N/A 454196 N/A
NOTE: N/A = Not Available C/F = Contact Manufacturer
MSCL – Suggested Catalog Ordering Numbers
Voltage Ballast Refractor Photometric
Catalog Number Wattage Light Source (60 Hz) Type Type Distribution
MSCL84Q1E21FSC3 85 Induction 120 Electronic Glass SC3
MSCL10T0E21FSC2C 100 Induction Multivolt Electronic Glass SC3
All GE suggested catalog ordering numbers come with PE receptacle. PE control must be ordered separately.
Order and install SCCL-PECTL if no PE is desired.
Multivolt ballasts can be for either 120, 208, 240, or 277 volt incoming power supply.

Product Dimensions
TOP VIEW
31.81 in.
(808 mm)
8.32 in.
(211 mm)
9.04 in.
(230 mm)
Adjustable For 1-1/4 in. (MSCL only) to 2 in. Pipe
(1.660 in. [42 mm] to 2.375 in. [60 mm] O. D.)
Insertion Depth 4.75 in. (121 mm)
15.12 in.
(384 mm)
31.81 in.
(808 mm)
SIDE VIEWS
15.12 in.
(384 mm)
8.32 in.
(211 mm)
10.75 in.
(273 mm)
SHALLOW GLASS
GLOBE
8.32 in.
(211 mm)
15.12 in.
(384 mm)
• Approximate Net Weight: 29 lbs (15-18 kgs)
• Effective Projected Area: 1.1 sq. ft. max. (0.1 sq. M max.)
DATA
• Suggested Mounting Height: 30-50 ft. (9-15 M)
www.gelighting.com
GE and the GE Monogram are trademarks of the General Electric Company. All other trademarks are the property
of their respective owners. Information provided is subject to change without notice. All values are design or typical
values when measured under laboratory conditions. GE Lighting and GE Lighting Solutions, LLC are businesses of
the General Electric Company. © 2014 GE.
OLP2921 (Rev 11/04/14)