Page 1
GE
Lighting
Roadway Lighting
M-250A2 Powr/Door (M2AR)
imagination at work
Page 2
Product Features
From HID to LED, GE continues to push Roadway Lighting to new heights. Recognized for the highest quality and reliability
in street, highway, parkway, and commercial applications, GE offers a wide selection of styles to meet the lighting needs
of municipalities, utilities, DOT customers and more.
Applications
• For residential streets, parking lots and roadways
Housing
• Die-cast aluminum housing.
• External stainless steel bail latch
Finish
• Polyester powder gray paint finish
Rating
•
Listed for wet location available as an option
/
Mounting
• Universal two-bolt slipfitter
Reflectors
• ALGLAS™ finish on reflector
Unique Features
• Adjustable mogul base socket (street side) – E39
standard
• No-tool PE receptacle
• Plug-in ignitor
• Plastic pest guard standard (not required for 2 in. pipe)
• Filtered optics
• Powr/Module ballast assembly
Page 3
Ordering Number Logic
M-250A2 Powr/Door (M2AR)
M 2 A R
_ _ _ _ _ _ _ _ _ _ _ _ _ _
PROD. ID
M2AR =
M-250A2
WAT TAGE
05 = 50
07 = 70
10 = 100
15 = 150
(55V)
17 = 175
20 = 200
25 = 250
LIGHT
SOURCE
E = Energy Act
Compliant Pulse
MH (EPMH)
S = HPS
P = PMH
Standard: Lamp
not included.
VOLTAGE
60Hz
0 = 120/208/240/
277 Multivolt
1 = 120
2 = 208
3 = 240
4 = 277
5 = 480
7 = 120X240
8 = 240V
Ballast 120V PE
Receptacle not
reconnectable
D = 347
F =
120X347
T = 220
50Hz
6 = 220
R = 230
Y = 240
NOTE: Dual voltage
connected for lower
voltage
BALLAST
TYPE
SELECTION
See Ballast
Selection Table
A = Autoreg
G = Mag-Reg
H = HPF
M = Mag-Reg
N = NPF
P = CWI with
S = Series (in Top
with
Grounded
Socket Shell
Reactor
or Lag
Reactor
or Lag
Grounded
Socket Shell
Housing)
PE
FUNCTION
1 = None
2 = PE Receptacle
NOTE: Receptacle
connected same
voltage as unit
except as noted.
Order PE Control
separately.
LENS TYPE
(PRISMATIC)
REFRACTOR
See Photometric
Selection Table
A = Acrylic
G = Glass
L = Polycarbonate
NOTE: 150 watt
Maximum with
Acrylic or
Polycarbonate
Refractors.
IES DISTRIBUTION
TYPE
See Photometric
Selection Table
M = Medium
L = Long
F = Four-(Way)
S = Semi-cutoff
N = Non-cutoff
W = (Four)-Way
2 = Type II
3 = Type III
FILTER
1 = Fiber gasket
2 = Charcoal
with
elastomer
gasket
OPTIONS
F = Fusing (Not available
with multivolt or dual
voltage)
J = Line Surge Protector,
Expulsion Type
(UL not available)
/
U = listed (all
HPS up to 175W MH
max) with glass or
polycarbonate refractor
(60Hz only)
Ballast Selection Table
Ballast Type/Voltage Ballast Type/Voltage
Light 347** 240/120
Wattage Source Multivolt 120 208 240 277 480 120X240 120X347 PER 220 220 230 240
50 HPS H,N H,N H,N H,N H,N H,N H,N H,N H,N N/A N/A N/A N/A
70,100,150 (55V) HPS A ,H,N A,G,H,M,N,P A,G,H,M,N A,G,H,M,N,P G,H,M,N G,M G,M,P G*,H,M*,N G,M,N N/A H,M, NH M††
100/150 (55V) HPS N/A H, N N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A
200 HPS A ,P A,H,N,P A,H,N,P A,H,N,P A ,P A A ,P P A,H,N N/A N/A N/A N/A
250 HPS A ,P A,H,N,P A,H,N,P A,H,N,P A ,P A,P A,P A,P A,H,N H A,H,N H A ,H
175 EPMH A A A A A A A A A N/A N/A N/A N/A
100** PMH H, N H, N H, N H, N H, N H, N H, N H, N H,N N/A N/A N/A N/A
150** PMH N/A H H H H N/A H H H N/A N/A N/A N/A
250 EPMH A A A A A A A v A N/A N/A N/A N/A
NOTE: N/A = Not Available †Not available in 175W ††150(55V) only *Not available in 120X347V C/F = Contact Manufacturer **Medium Base Socket
60Hz 50Hz
Photometric Selection Table
PHOTOMETRIC SELECTION TABLE
All light sources are clear unless otherwise indicated.
IES Distribution Type
Photometric Curve Number 35 (Socket Postition)
Light Lens Type
Wattage Source (Prismatic LN3 MN2 MN3 MS2 MS3 FW3
Refractor)
50,70,100,150 (55 V) HPS Acrylic N/A 457232(1A) 457233(2A) 457230 (2B) 457231(2.5B) N/A
50,70,100,150 (55 V) HPS Glass N/A 457236(1A) 457237(2A) 457234(1.5B) 457235(2.5B) 457268(1A)
50,70,100,150 (55 V) HPS Polycarb. 457254(1A) N/A 457252(2B) 457311 N/A N/A
200, 250 HPS Glass N/A N/A N/A 457263(2DH) 457262(1DH) N/A
175, 250 EPMH Glass N/A 457283(1A) 457275(2A) 457276(1B) 457277(2B) 457270(1A)
100, 150 PMH Glass N/A 451483(2A) N/A N/A N/A N/A
NOTE: N/A = Not Available PMH—Contact Manufacturer
Page 4
M2AR – Suggested Catalog Ordering Numbers
Voltage Ballast Refractor Photometric
Catalog Number Wattage Light Source (60 Hz) Type Type Distribution
M2AR10S1N2AMS21 100 HPS 120 NPF Reactor Acrylic MS2
M2AR15S1N2AMS31 150 HPS 120 NPF Reactor Acrylic MS3
M2AR25S0A2GMS31 250 HPS Multivolt Auto-Regulator Glass MS3
All GE suggested catalog ordering numbers come with PE receptacle. PE control must be ordered separately.
Order and install SCCL-PECTL if no PE is desired.
Multivolt ballasts can be for either 120, 208, 240, or 277 volt incoming power supply.
Product Dimensions
27.500 in. (699 mm)
Photoelectric Control
Receptacle
13.250 in.
(337 mm)
11.500 in.
(292 mm)
Leveling Pad
11.500 in. R
(292 mm) R
4.750 in.
(121 mm)
Adjustable For 1-1/4 in. to 2 in. Pipe
(1.660 in. to 2.375 in. OD)
(42 to 60 mm OD)
12.000 in. (305 mm)
Minimum Distance
For Door Removal
15.250 in. R
(387 mm) R
• Approximate Net Weight: 20-30 lbs (9-14 kgs)
• Effective Projected Area: 0.7 sq. ft. max. (0.07 sq. M max.)
DATA
• Suggested Mounting Height: 20-40 ft. (6-12 M)
www.gelighting.com
GE and the GE Monogram are trademarks of the General Electric Company. All other trademarks are the property
of their respective owners. Information provided is subject to change without notice. All values are design or typical
values when measured under laboratory conditions. GE Lighting and GE Lighting Solutions, LLC are businesses of
the General Electric Company. © 2014 GE.
OLP2936 (Rev 11/04/14)
Loading...