GE LWC50, LWC55, LWC70, LWC80t User Manual

63 Bonville Ave,
Thornton, New South Wales
Australia, 2322

t [phone]
f [phone]
e [e-mail]
w www.ge.com/au

www.ge.com/au

LWC 50/55/70/80t

Longwall Chock Carrier

Longwall
Chock Carrier

Vehicles that show their best advantage when
mine conditions are most diffi cult.

LWC - Specifi cations

Specifi cations 50T 4WD 70T 4WD 80T 6WD

Overall Length 9938 mm 10528 mm 10588 mm

Overall Width 3590 mm 3892 mm 4123 mm

Overall Height 1860 mm 1894 mm 1971 mm

Payload Width 1752/2123 mm 2123 mm 2168 mm

Ground Clearance 286 mm 286 mm 188 mm

Installed Power 242 kW 242 kW 242 kW

Tare Weight 26 T 33.7 T 34.6 T

Draw Bar Pull 24.7 T 26.1 T 33.4 T

Carry speed 10 km/hr 10 km/hr 10 km/hr

Travel speed 20 km/hr 20 km/hr 20 km/hr

LWC - Specifi cations

Installed Tier 3 Diesel Engine System.

The GE Industrea Longwall Chock Carrier is purpose built to handle heavy chocks in your
mine. The Chock Carrier will take in stride a wet grade, poor fl oor or low workings as it
carries the chock with mass directly over the drive wheels.

• Drive wheels directly under the load for maximum traction at all times

• Four (4) radial tyres under the pay load to minimize ground pressure

• Single articulation for maximum manoeuvrability and control

• Automatic Forced Diff erential (AFD) steering system

• Retardation control system for tight control on declines

• Travelling clearance set by chock collapsed height

• Purpose built for moving heavy chocks effi ciently

• Available in 4WD and 6WD

1. Diesel Engine System

2. Drivers Compartment

3. Drive Wheels

4. Lifting Mechanism

5. 62 Tonne Rated Chock

LWC

Longwall Chock Carrier