Built-In Microwave/Convection Oven
CWB7030SL
FEATURES & BENEFITS
1.7 cu. ft. capacity - 975 microwave watts (IEC test procedure) and 1500 convection watts
Convection cooking - Choose this setting when baking or browning is desired
Combination Fast Cook setting - Combining microwave and radiant heat for speed
Steam cook button - Perfectly prepare your steamed favorites
Glass touch controls - Glass touch controls offer a sleek console that is both easy to use and clean
My Cycle - Create a custom cook time setting, and with one touch, cook your favorite dish just the way you like
Warming and Proofing oven - Keep foods hot and ready to serve in the warming oven or use the proofing oven to provide the ideal environment for bread to rise
120 Volts - Plugs into any wall outlet Convection rack - Achieve golden-brown results
FEATURES
Control Type |
Glass Touch |
Cooking Technology |
Convection |
Microwave Watts (IEC-705) |
975 W |
Power Levels |
10 |
Convection Cooking Controls |
Combination Fast Cook; Convection Bake/Broil; |
Warm/Proof |
|
Microwave Sensor Cooking Controls |
Auto Cook; Popcorn; Steam Cook |
Microwave Convenience |
|
Cooking Controls |
Time Cook; Defrost: Weight/Time |
|
Start/Pause; Cancel/Off; Control Lock; Power; Timer |
|
On/Off; Clock; Add 30 Seconds; Back; Settings; |
Control Features |
Cooking Complete Reminder; Demo Mode |
Microwave Oven Interior |
Stainless Steel |
Electronic Digital Display with Clock |
Yes |
Interior Oven Light |
Halogen |
Rack Type |
Removable Oven Rack - Pedestal |
Turntable |
Glass |
Turntable Size |
16.0 in |
CAPACITY
Total Capacity (cubic feet) |
1.7 cu ft |
POWER / RATINGS
Electrical Input - 120V Amperage |
14.0 |
Electrical Input - 120V Watts |
1600 |
Frequency (MHz) |
2450 |
Input Volts/Hertz |
120/60 |
Voltage (MIN) |
120.0 V |
WEIGHTS & DIMENSIONS
Approximate Shipping Weight |
100 lb |
Cabinet Width |
30 in |
Cavity (W x H x D) |
20-1/16 x 8-1/2 x 17 in |
Net Weight |
75 lb |
Overall Depth |
24-3/4 in |
Overall Height |
19-1/8 in |
Overall Width |
29-7/8 in |
WARRANTY
Parts Warranty |
Limited 1-year entire appliance |
Labor Warranty |
Limited 1-year entire appliance |
Warranty Notes |
See written warranty for full details |
APPEARANCE
Color Appearance |
Stainless Steel |
Handle |
Yes |
Built-In Microwave/Convection Oven
CWB7030SL
DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)
Note: Cabinets installed adjacent to wall ovens must have an adhesion spec of at least a 194°F temperature rating.
INSTALLATION INFORMATION: Before installing, consult installation instructions packed with product for current dimensional data.
|
|
|
Note: Cabinets installed adjacent |
|
23-1/2" |
|
|
|
|
|
to wall ovens must have an adhesion |
|
Cutout depth |
|
|
|
|
|
spec of at least 194° F temperature rating. |
25-1/4" |
|
4-3/16" |
|
|
|
|
24-3/4" |
Cutout width |
|
|
|
|
|
|
|
|
|
||
|
|
|
depth incl. |
|
|
|
|
|
|
|
handle |
|
|
Junction |
|
|
|
|
|
A |
|
box location |
|
|
|
|
|
B |
Construct Solid Bottom |
||
|
|
|
|
|
|||
|
|
|
|
Conduit |
17-1/2" |
MIN. 3/8" Plywood |
|
|
|
|
19" |
Supported by 2 x 4 |
|||
|
C |
|
(48-1/2" |
Cutout height |
|||
|
L |
2x4’s or |
long) |
|
or 1 x 2 Runners, |
||
|
|
|
all Four Sides. |
||||
|
|
equivalent |
|
|
|||
|
|
C |
|
(Platform must be |
|||
|
|
solid floor |
|
||||
|
|
|
able to support cabinet |
||||
|
|
|
|
||||
|
|
|
|
|
|
load, weight of oven, |
|
|
|
|
29-3/4" |
21-1/2" |
|
and additional |
|
|
|
|
|
oven loads) |
|||
|
|
|
|
Back of Control |
|||
|
|
|
|
|
5" min.from |
||
|
|
|
|
|
floor 1" MIN |
||
Suitable |
|
|
|
30" |
above toekick |
||
|
|
|
|
|
|||
bracing |
21-5/8" |
|
|
|
|
|
|
to support |
|
|
|
|
|
||
over centerline |
|
A = The unit overlap is 1/2" but allow 5/8" clearance from top edge of cutout |
|||||
runners |
|
||||||
of cabinet |
|
||||||
(Platform must be able to support |
B = The unit overlap is 2-1/4" but allow 2-3/8" clearance from side edges of cutout |
||||||
C = The unit overlap is 1" but allow 1-1/8" clearance from bottom edge of cutout |
|||||||
cabinet load, weight of oven, and |
|||||||
|
|
|
|
additional oven loads)
|
4-3/16" |
|
Cabinet width |
||
|
|
24-3/4" |
|
|
depth incl. |
|
|
handle |
Junction box location |
|
A |
|
|
B |
|
|
|
|
19" |
21-1/2" |
|
Back |
3" MIN. between cutouts |
|
|
of Control |
|
|
C |
recommended—2" MIN. required |
|
29-3/4" |
|
|
29-3/4" |
|
|
|
Construct Solid Bottom |
|
Conduit |
MIN. 3/8" Plywood Supported by |
|
(46" long) |
2 x 4 or 1 x 2 Runners, all Four Sides. |
|
|
(Each platform must be able to support |
|
|
cabinet load, weight of oven, and |
|
|
additional oven loads) |
|
|
Cutout height and width |
|
|
per drawer requirements |
|
|
2" MIN between cutouts |
|
|
1" MIN above toekick or adjust |
|
|
to oven installation height |
For answers to your Café™ product questions, visit our website at cafeappliances.com. |
© 2020 GE Appliances PC 95218 10/20 |