GE 45254 Owner's Manual
MOTION-ACTIVATED
LED Security Light
User Manual
www.jascoproducts.com
1-800-654-8483
2
Thank you for purchasing the GE LED Security Light with Motion
Activation control. This economical, energy efficient LED light has been designed to allow easy installation, flexible mounting options and
provide exceptional light output with minimum power consumption.
Please read all the Instructions carefully. Keep them for future reference.
PARTS LIST
Before installing please ensure all the following items are
included in the package:
LED Security light with
two light housings
and motion sensor
3 Wire Connectors
TOOLS NEEDED
Phillips head screwdriver #2
Mounting plate
and screws
Gasket
GE BadgeMounting Bolt
3
Questions? Problems? Missing Parts?
If you have any questions regarding the installation or operation of the
product, Before returning to Retailer, please contact Technical Support at
1-800-654-8483,option 4.
WARNING: Turn power off at circuit breaker or fuse box. Do Not rely
on a wall switch alone to turn off power.
Consult a local licensed electrician or electrical contractor if you are not
sure about the installation. Always install wiring connections in accordance with local code, ordinances and National Electric Code.
WARNING: The LED light output is strong enough to injure human eyes.
Do not stare directly at the LEDs for more than a few seconds.
4
INSTALLATION
Select an existing light fixture, either wall or eave mount for replacement.
Note: The fixture must be connected to 120v, 60Hz power source.
MOUNTING PREPARATION FOR THE LED LIGHT FIXTURE
Note: For maximum flexibility, the LED Security Light can be mounted on a
wall (vertical) or under the eave (horizontal).
LED Housing
Eave Mount
Lock Nut
Motion
Sensor
Adjustment Knob
Dusk/Dawn
Adjustment
Wall Mount
Cover
Housing
Mounting
Plate
Time Adjustment
for Lights
Loading...