GE 45235 User Manual

Home Monitoring

B/W Wireless
Camera System
with Monitor

User Manual

45235

www.jascoproducts.com

1-800-654-8483

2

Thank you for purchasing the GE 45235 B/W
Wireless Camera System with Monitor. Please
review these instructions carefully before
attempting to operate the unit.

PRODUCT FEATURES

“Wi-Fi” internet friendly wireless system—won’t

•
interfere with home wireless networks

View up to two cameras automatically

•

Audio Detection & Notifi cation feature—alerts

•
when sound is detected in a monitored area

Night Vision feature for low or no light viewing

•
up to 10 ft.

Unique “axis-swivel” camera mount allows for

•
desktop or wall installation

Adjustable antenna for both camera and

•
monitor

Wirelessly transmits audio and video up to 200 ft

•
(unobstructed line of sight)

Camera for Indoor/Outdoor use

•

PACKAGE CONTENTS

Please check and identify all the parts before
proceeding with the installation.

3

1.

2.

3.

4.

45235B/W Wireless Camera
45235 5.5” B/W CRT monitor
Wall mounting hardware
2 AC adapters

BEFORE YOU INSTALL

When choosing the best location for the placement
of the camera and monitor, it is best to avoid any
sources of possible RF interference such as
microwave ovens and cordless phones. Proximity
to these and other sources of RF interference can
inhibit the proper functioning of the receiver.

The 900MHz video signals pass easily through
your home’s interior walls, but the signal may be
refl ected by power wires or plumbing inside those
walls. Usually a slight adjustment to the position
of the Monitor/Receiver and/or Camera antenna
will improve reception. Take care not to force the
antennas past their lock positions.

CHOOSING A CAMERA MOUNTING LOCATION

The Wireless B/W Camera included in the 45235
system can be positioned on a desktop, or
mounted to a wall. It is suitable for indoor or
outdoor use. When choosing a mounting location,
please be advised:

4

Do not use in wet locations. If using outside,

•
position camera in a sheltered location.

Do not position the camera so that it points

•
directly into the sun or any bright light, as this
may cause damage to the camera.

Avoid viewing areas where half the area is in

•
bright sunlight and the other half is dark, such
as in the shadow of a building. All types of
cameras have diffi culty “seeing” into areas of
such divergent light levels.

In low light conditions, the camera will

•
automatically activate the Infrared (IR) LED’s and
switch the camera to Night Vision mode. Night
Vision viewing distance is up to 10 feet.

The AC adapter used to power the camera

•
cannot be positioned farther than 8 ft. from
an AC socket. Do not use the supplied adapter
outside or run the cable through walls. If you
need to extend the adapter cable, 15 ft.
extensions are available by contacting
Customer Service at 800-654-8483.

The Camera has an unobstructed wireless

•
transmission range up to 200 ft. from the
receiver. Transmission distance indoors is
reduced due to interior walls, wiring, household
fi xtures and metal plumbing.

5

CONNECTING TO THE MONITOR

Before beginning installation, we recommend that
you temporarily “connect” the 45235 B/W Wireless
Camera to the 5.5” Monitor to help familiarize
yourself with the camera system and select the
best location for installing the camera. The camera
connects wirelessly and automatically to the monitor
when both are powered on and within 200 ft. of
each other (unobstructed view). This system will
accommodate up to 2 cameras.

Shown with optional
rechargeable battery
(Sold separately)

1. Plug the AC adapter into the power jack on the
back of the monitor, then into an AC outlet.

2. Turn on the monitor by pressing the power
button on the front of the unit. Adjust the sound
level at the front of the monitor to midpoint with
the volume control knob.

3. Select the appropriate “channel” (1 or 2) on the
monitor that corresponds to the channel switch