GBC H212, SureFlow HeatSeal H212, SureFlow HeatSeal H312 Instruction Manual

G

Instruction Manual

F

Manuel d’utilisation

D

Bedienungsanleitung

I

Manuale d’istruzioni

O

Gebruiksaanwijzing

E

Manual de instrucciones

P

Manual de Instruções

T

Kullanım Kılavuzu

K

Οδηγίες

c

Brugsvejledning

o

Käyttöopas

o

Bruksanvisning

S

Bruksanvisning

Q

Instrukcja obsługi

o

Návod k obsluze

H

Használati útmutató

o

Руководствo по
зкcплyатации

NO

FI

CZ

RUS

HeatSeal
H212/H312

with SureFlow™ Technology

English 4
Français 6
Deutsch 8
Italiano 10
Nederlands 12
Español 14
Português 16
Türkçe 18

Ελληνικά 20

Dansk 22
Suomi 24
Norsk 26
Svenska 28
Polski 30

Česky 32
Magyar 34
Pyccкий 36

7

1

4

2

5

6

3

4

Special notice

Thank you, for your recent purchase of a GBC Pouch Laminator. Your
new laminator may emit a slight odour during the initial stage of
operation. It is normal and will diminish after several hours of operation.

Service

• Do not attempt to service or repair the pouch laminator yourself.
Unplug the unit and contact an authorised ACCO Brands Europe
service representative for any required repairs.

Electrical safeguards

• The unit must be connected to a supply voltage corresponding to the
electrical rating shown on the unit.

• Unplug the unit before moving it, or when it is not in use for an
extended period of time.

• Do not operate with a damaged supply cord or plug. Do not alter the
attachment plug. The plug is configured for the appropriate electrical
supply.

• Do not overload electrical outlets beyond their capacity; fire or
electrical shock could result.

• The unit is intended for indoor use only.

• Never push objects through the cabinet slots. Do not spill liquid of any
kind on this product.

• Close supervision is required when this product is used near children.

General safeguards

• Use the unit only for its intended purposes of laminating documents.

• Do not place anything in the throat opening of the laminator other than
pouches/documents.

• Place unit on a secure, stable work area to prevent the unit from
falling and possibly causing personal injury and damage to the unit.

• Follow all warnings and instructions marked on the unit.

• The socket outlet shall be installed near the equipment and shall be
easily accessible.

• Do not attempt single side lamination, this will destroy the laminator.

• Do not block the vent slots, this will cause the laminator to overheat.

The following ISO and IEC symbols appear on this product, and their
meanings are as follows:

HeatRelease

ColdOn / Off

THIS WARNING IS FOUND ON THE PRODUCT.

Electrical shock hazard.
Do not open. No user
servicable parts inside.
Refer servicing to qualified
service personnel.

WARNING

m

c

This safety message means that you could be seriously hurt or killed if
you open the product and expose yourself to hazardous voltage.

THE SAFETY ALERT SYMBOL PRECEDES EACH SAFETY
MESSAGE IN THIS INSTRUCTION MANUAL.

THIS SYMBOL INDICATES A POTENTIAL PERSONAL
SAFETY HAZARD THAT COULD HURT YOU OR OTHERS,
AS WELL AS CAUSE PRODUCT DAMAGE OR PROPERTY
DAMAGE.

m

Safety instructions

YOUR SAFETY AS WELL AS THE SAFETY OF OTHERS IS IMPORTANT
TO ACCO BRANDS EUROPE. IN THIS INSTRUCTION MANUAL AND ON
THE PRODUCT ARE IMPORTANT SAFETY MESSAGES. READ THESE
MESSAGES CAREFULLY.

m

WARNING: FOR YOUR PROTECTION DO NOT CONNECT
THE POUCH LAMINATOR TO ELECTRICAL POWER UNTIL
YOU READ THESE INSTRUCTIONS COMPLETELY. KEEP
THESE INSTRUCTIONS IN A CONVENIENT LOCATION FOR
FUTURE REFERENCE. TO GUARD AGAINST INJURY, THE
FOLLOWING BASIC SAFETY PRECAUTIONS MUST BE
OBSERVED IN THE SET-UP AND USE OF THIS PRODUCT.

m

Important safeguards

m

Caution: Unplug this product before cleaning.

• Wipe exterior only with a damp cloth. Do not use detergents
or solvents.

• Do not use aerosol dusters or cleaners.

• Do not spray anything into the machine.

m

Cleaning

Specifications

GBC HeatSeal H212

230V / 50hZ / 2Amps / 500W

400 x 173 x 117.5mm

3.1kg

241mm

2 x 125 mic (Total 250)

0.8mm

5 minutes

Electrical
Machine Dimensions
Machine Weight
Maximum Pouch Width
Maximum Pouch Thickness
Maximum Thru-put Thickness
Warm-Up Time (2 x 75 mic)

GBC HeatSeal H312

230V / 50Hz / 2Amps / 500W

476x173x117mm

3.9kg

318mm

2 x 125 mic (Total 250)

0.8mm

5 minutes

5

G

Operation, hot lamination

1

Connect power cord to appropriate power source.

2

Push the power button to turn the power “ON” (fig. 2). The

indicator will glow red.

3

Using the lamination guidelines (fig. 3), select the appropriate

temperature setting for the pouch gauge thickness and material you
are laminating.

• If the laminated item appears to be cloudy, it means that the
laminator temperature is not hot enough. Allow the laminator to
heat for a few more minutes then run the pouch through again.

• If the laminated item is wavy, the TEMPERATURE is too hot. Verify
temperature selector is set at the appropriate temperature.

• Always allow sufficient time for the laminator to adjust to changes
in temperature setting.

4

A series of four beeps will be heard when laminator reaches

operating temperature.

5

Position the document to be laminated into a GBC laminating pouch,

so that the document is aligned to the folded sealed edge and the
right and left borders are equal (fig. 4).

6

Insert the pouch and its contents straight into the machine, leading

with the folded edge.

7

The laminated item will automatically exit the rear of the machine.

After the pouch has stopped moving, immediately place it on a flat
surface to cool for one minute before handling (fig. 5).

8

If you have finished laminating, push the switch to turn “OFF” the

machine.

DO NOT LAMINATE AN EMPTY POUCH

Guarantee

Operation of this machine is guaranteed for two years from date of
purchase, subject to normal use. Within the guarantee period, ACCO
Brands Europe will at its own discretion either repair or replace the
defective machine free of charge. Defects due to misuse or use for
inappropriate purposes are not covered under the guarantee. Proof
of date of purchase will be required. Repairs or alterations made by

persons not authorised by ACCO Brands Europe will invalidate the
guarantee. It is our aim to ensure that our products perform to the
specifications stated. This guarantee does not affect the legal rights
which consumers have under applicable national legislation governing
the sale of goods.

Register this product online at www.accoeurope.com

Helpful lamination hints

1

Temperature setting Guidelines:

When laminating thin paper with light ink coverage, set the
temperature dial at the low end of the range. Thick paper and heavy
ink coverage require higher settings. Temperature settings will vary
due to the finish, chemistry and heat absorption properties of the
material being laminated.

2

Before laminating important or unique documents always run a test

pouch through the laminator using a similar type document.

3

Do not attempt to do single sided lamination. This will destroy the

laminator.

4

As soon as the lamination is completed, remove from the rear of the

machine and place on a cool flat surface for cooling to prevent the
pouch from curling.

5

Do not block the vent slots, this will cause the laminator to overheat.

Release lever

How to use the release lever.

1

If pouch jams or is fed improperly, turn off the laminator immediately.

2

Press the release lever down to release the motor from the rollers

(fig. 6).

3

Pull your document back out of the laminator while pressing the

release lever down (fig. 7).

4

Clean the rollers by running the cleaning sheet supplied with the

laminator through the machine 2 or 3 times in the hot operation
mode (red zone on temperature dial). If you do not have this sheet,
use a similar cardboard sheet that fits the width of the laminator.

5

Continue laminating.

Operation, cold lamination

1

Connect power cord to appropriate power source.

2

Rotate the temperature dial to the “cold” position (fig. 2).

3

Push the power button to turn the power “ON” (fig. 2), the

indicator light will glow red.

4

A series of four beeps will be heard when the laminator is ready to

use.

5

Use and laminate your GBC cold pouch.

(Pressure sensitive—non-thermal laminating pouch)

Important: Before operating your new laminator, lift up the exit tray located at the rear of the machine and lock it in place (fig. 1).

ACCO Brands Europe
Oxford House
Aylesbury HP21 8SZ
United Kingdom

www.accoeurope.com

Service

G

ACCO Service Division
Freepost 193, Hereward Rise, Halesowen, West Midlands, B62 8AN.
Tel: [phone], Fax: [phone], www.acco.co.uk/service

ACCO UK Sales International
Oxford Road, Aylesbury, HP21 8SZ.
Tel: [phone], Fax: [phone]

F

ACCO France
Service Aprés-Vente, 8 Rue du 19 Mars 1962, 21601 Longvic, Cedex BP7/ZI.
Tel: [phone], Fax: [phone]

O

ACCO Benelux
Peppelkade 64, 3992AK Houten.
Tel: [phone], Fax: [phone], [e-mail], www.accobenelux.nl

B

ACCO Benelux (Technische Dienst)
Peppelkade 64, 3992AK Houten, Nederland.
Tel: [phone], Fax: [phone], [e-mail], www.accobenelux.be

D

ACCO Deutschland

o

Arnoldstrasse 5, 73614 Scorndorf, Germany.

H

Tel: +49 - 7181/887-160, Fax: +49 - 7181/887-165

o

XERTEC a.s.
U Továren 770/1b, 102 00, Praha 10.
Tel: [phone], Fax: [phone], www.xertec.cz

A

ACCO Österreich
Sallmann Bürotechnik GmbH, Esshaverstrasse 16, 5020 Salzburg.
Tel: [phone], Fax: [phone], e-mail: [e-mail]

S

ACCO Schweiz
ABC Bürotechnik AG, Winkelbüel 4, 6043 Adligenswil.
Tel: [phone], Fax: [phone],
e-mail: [e-mail]

c

Mailtech
Baldersbaekvej 8B 2635 Ishoj.
Tel: [phone], Fax: [phone], e-mail: [e-mail]

N

Sannum & Stang
Gladengveien 16 0661 Oslo.
Tel: [phone], Fax: [phone], e-mail: [e-mail]

I

ACCO Italia Spa
Via Nenni 13, Settimo Torinese (TO) Via Regio Parco 10B/bis.
Tel: [phone], Fax: [phone]

o

ACCO-Rexel Ltd
Clonshaugh Business & Technology Park, Clonshaugh Dublin 17.
Tel: [phone], Fax: [phone]

Q

ACCO Polska Sp. z o.o.
Al-Jerozolimskie 184, 02-486 Warszawa.
Tel: [phone], Fax: [phone]

S

ACCO Nordic Region
Kontor 1, i norden AB Kanalvägen 16 194 61 Upplands Väsby.
Tel: [phone], Fax: [phone]

o

Somen Huoltopalvelu oy
Kanaamouka 1 00360 Helsinki. Tel: [phone], Fax: [phone]

E

ACCO Iberia SL

P

Isaac Peral 19, 28820 Coslada (Madrid). Tel: [phone], Fax: [phone]

g

Oddi
Höfdabakka 3-7 IS-112 Reykjavik. Tel: [phone], Fax: [phone]

T

Eraysan
Ankara Cad N.129, Sirkeci, Istanbul.
Tel: [phone], Fax: [phone], [e-mail]

o

ACCO Australia Pty.
Level 2 Building B, 8 Lord Street, Botany. NSW. Australia 2019.
Tel: [phone], Fax: [phone]

FI

IRE

RUS

AUS

CZ

Ref: H212H312/5276
Issue: 1 (01/07)