GBC GDS2219, GDM1013, GDHS713, GDX1813, GDX2019 Instruction Manual
...
GDS2213
GDX1813
GDM1013
GDHS713
GDS2219
GDX2019
GSS208
GSX168
GSM128
Document Shredders
Déchiqueteuses
Destructoras de documentos
ShredMaster
®
Instruction Manual
Manuel d’utilisation
Manual de instrucciones
To register this product go to www.gbc.com
Pour enregistrer ce produit, allez sur www.gbc.com
Para registrar este producto visite www.gbc.com
Specifications
GSX168
15-16 sheets
4 mins on / 20 mins off
120V AC / 60Hz
4.0A
Yes
GSM128
10-11 sheets
4 mins on / 20 mins off
120V AC / 60Hz
XXA
No
GDS2213
19-22 sheets
Continuous
120V AC / 60Hz
3.0A
Yes
Models
Sheet Capacity 80gsm paper Duty Cycle
Volts / Hz
Amperage
CD / Credit Card
IMPORTANT: ONLY INSERT ONE CD OR ONE CREDIT CARD AT A TIME.
Models GDM1013, GDHS713 and GSM128 cannot shred CDs, credit cards, paper clips or staples.
Sheet capacity may vary with AC line voltage.
GDX1813
16-18 sheets
Continuous
120V AC / 60Hz
4.5A
Yes
GSS208
17-20 sheets
4 mins on / 20 mins off
120V / 60Hz
2.5A
Yes
•
Models
Sheet Capacity 80gsm paper Duty Cycle
Volts / Hz
Amperage
CD / Credit Card
GDM1013
10-11 sheets
Continuous
120V AC / 60Hz
XXA
No
GDHS713
6-7 sheets
Continuous
120V AC / 60Hz
XXA
No
GDS2219
21-22 sheets
Continuous
120V AC / 60Hz
3.0A
Yes
GDX2019
18-20 sheets
Continuous
120V AC / 60Hz
5.0A
Yes
Spécifications :
GSX168
15-16 feuilles
4 min en marche /
20 min à l’arrêt
120 V AC / 60 Hz
4,0 A
Oui
GSM128
10-11 feuilles
4 min en marche /
20 min à l’arrêt
120 V AC / 60 Hz
XXA
Non
GDS2213
19-22 feuilles
Continu
120 V AC / 60 Hz
3,0 A
Oui
Modèles
Capacité de coupe - papier de 80 g/m² Cycle d’utilisation
Volts / Hz
Intensité de courant
CD / Carte de crédit
IMPORTANT : INSÉREZ SEULEMENT UN CD OU UNE CARTE DE CRÉDIT À LA FOIS.
Les modèles GDM1013, GDHS713 et GSM128 ne peuvent pas déchiqueter les CD, cartes de crédit, trombones ou agrafes.
Feuilles mai varient en fonction de la tension.
GDX1813
16-18 feuilles
Continu
120 V AC / 60 Hz
4,5 A
Oui
GSS208
17-20 feuilles
4 min en marche /
20 min à l’arrêt
120 V / 60 Hz
2,5A
Oui
•
Modèles
Capacité de coupe - papier de 80 g/m² Cycle d’utilisation
Volts / Hz
Intensité de courant
CD / Carte de crédit
GDM1013
10-11 feuilles
Continu
120 V AC / 60 Hz
XXA
Non
GDHS713
6-7 feuilles
Continu
120 V AC / 60 Hz
XXA
Non
GDS2219
21-22 feuilles
Continu
120 V AC / 60 Hz
3,0 A
Oui
GDX2019
18-20 feuilles
Continu
120 V AC / 60 Hz
5,0 A
Oui
Especificaciones
GSX168
15-16 hojas
4 minutos encendida /
20 minutos apagada
120V CA / 60Hz
4,0A
Sí
GSM128
10-11 hojas
4 minutos encendida /
20 minutos apagada
120V CA / 60Hz
XXA
No
GDS2213
19-22 hojas
Continuo
120V CA / 60Hz
3,0A
Sí
Modelos
Capacidad de hojas papel de 80 gsm Ciclo de trabajo
Voltios / Hz
Consumo
CD / Tarjetas de crédito
IMPORTANTE: INSERTE SÓLO UN CD O TARJETA DE CRÉDITO POR VEZ.
Los modelos GDM1013, GDHS713 y GSM128 no pueden triturar CD, tarjetas de crédito, sujetapapeles o broches.
Hojas de capacidad puede variar con el voltaje.
GDX1813
16-18 hojas
Continuo
120V CA / 60Hz
4,5A
Sí
GSS208
17-20 hojas
4 minutos encendida /
20 minutos apagada
120V / 60Hz
2,5A
Sí
•
Modelos
Capacidad de hojas papel de 80 gsm Ciclo de trabajo
Voltios / Hz
Consumo
CD / Tarjetas de crédito
GDM1013
10-11 hojas
Continuo
120V CA / 60Hz
XXA
No
GDHS713
6-7 hojas
Continuo
120V CA / 60Hz
XXA
No
GDS2219
21-22 hojas
Continuo
120V CA / 60Hz
3,0A
Sí
GDX2019
18-20 hojas
Continuo
120V CA / 60Hz
5,0A
Sí
sheet capacity may vary with AC LINE VOLTAGE.
Models: GSS208, GSX168, GSM128
g
h
i
d
a
f
1
3
e
b
c
i
f
e
g
b
h
d
a
1
2
Models: GDS2213, GDX1813, GDS2219, GDX2019, GDM1013,
GDHS713
4
Introduction
Thank you for choosing this shredder from GBC. We are sure it will serve you well, but please take a little time to study these
instructions to ensure you get the best out of your machine.
a Important Safety Symbols
b GSS208, GSX168, GSM128:
Pull Out Drawer
GDS2213, GDX1813, GDS2219, GDX2019, GDM1013,
GDHS713: Door for Bin
c Wheels
d On/Off Button (Rear of machine)
e Auto Button
f Reverse Button
g Continuous Forward Function
h CD Guide (not fitted on GDM1013, GDHS713, GSM128)
1 Bin Full (Red Light)
2 Door Open (Red Light)
3 Cool Down (Red Light)
Safety First
Shredders are safe to use as long as you take a few safety
precautions.
• Ensure the machine is plugged into an easily accessible
power outlet, and ensure the cable is not likely to trip up a
passer by.
• Any attempt to repair this unit by unqualied personnel will
invalidate the warranty. Please return to supplier.
• Unplug your shredder before moving it or when it is not in
use for an extended period of time.
• Do not operate with a damaged power supply cord or plug,
after it malfunctions, or after it has been damaged in any
manner.
• Do not overload electrical outlets beyond capacity as this can
result in fire or electrical shock.
• The socket-outlet should be installed near the equipment and
shall be easily accessible.
• Do not alter the attachment plug. The plug is congured for
the appropriate electrical supply.
• Do not use near water.
• Do not use aerosol dusters or cleaners.
• Do NOT spray anything into the shredder.
Although this shredder has been designed to be child safe, it is
not advised to operate the machine near children and pets.
Lights and Icons Explained
Anti-Jam Indicator Auto Bin Full Door Open Cool Down*
Colour of LED Red Green Blue Red Red Red
Power On/Off Switch
Auto Mode light light
Forward Mode light light
Reverse Mode light light
Jam Free Anti-Jam Technology light light
Bin Full light light light
Door/Bin Open light light light
Cool Down Indicator light* light*
Self Cleaning of Cutters light light
Sleep Mode
* GSS208, GSX168, GSM128, only
•
5
Jam Free Anti-Jam Technology
Jam Free Shredders will only shred stacks of paper that are
within the shredder’s sheet capacity. For example, a shredder
with a capacity of 22 sheets will not allow the shredding of
more sheets than this.
Sensors in the paper feed area measure the thickness of
paper about to be shredded. The ability to shred or not is
communicated through red and green lighting. Green means
that the stack of paper is within the shredders sheet capacity
and OK to shred. Red means that you have too much paper,
remove some sheets in order to shred.
Given that you are unable to shred more sheets of paper
than the shredder is capable of shredding, paper jams are
prevented.
This prevents time wasted through reversing paper and
unblocking jams not to mention the mess it can create.
Rare Occasions of Jamming
In the unlikely event of the shredder jamming, use the reverse
function to unblock the shredder (see Reverse function section).
Alternating between the reverse and continuous forward
functions will help unblock the feed area.
Door Open Safety Function
If the door is opened during shredding as a safety precaution
the shredder will instantly stop, and the door open symbol/
indicator will glow red.
Over Heating
If small office models (GSS208, GSX168 and GSM128) are
used continuously for long periods of time the shredder
may overheat. If this occurs the thermometer symbol on the
indicator panel will illuminate.
When the shredder is ready to be used again the thermometer
symbol will not illuminate.
Shredder Control Panel
ReverseForwardAuto
Safety First - Read instructions before use
This means you should be careful because long hair can become
entangled in the cutting head.
This means don’t reach into the feed opening of the cutting
head.
This means be careful of ties and other loose clothing which
could become entangled in the cutting head.
This means keep children away from shredder.
This means be careful of loose jewellery which could become
entangled in the cutting head.
GSM128, GDM1013 and GDHS713 only.
This means do not shred CDs.
This means do not shred credit cards.
This means do not shred staples.
This means do not shred paper clips.
This means the door is open.
This means the bin is full.
This means no aerosols.
This means machine is cooling down.
6
Reverse Function
• Should you wish to reverse the shredding direction while
shredding a document, a reverse button (f) has been fitted for
your convenience.
• By pressing the reverse button the shredding cutters will
change direction allowing the retrieval of the document being
shredded. The anti-jam indicator will turn to red.
• The reverse function will only run whilst the button is being
pressed. When the reverse button has been released the
shredder will revert to stand by mode.
• To turn back to auto mode, press the auto button (e).
CD and Credit Card Shredding
Models GSM128, GDM1013 and GDHS713 can not shred CD’s
or credit cards, therefore this section is not applicable to these
three models. All other Jam Free models can shred CD’s and
credit cards as follows:
• A separate CD tray is provided on some models to collect the
shredded CD shards. Ensure that this is correctly mounted
onto the bin rail or internal bin before shredding CDs or credit
cards. CD and credit card shards should be disposed of
separately to paper.
• Pull up the CD guide (h) located in the centre of the feed area
and flip it into position over the shredder mouth.
• For credit card shredding, switch the shredder to auto mode
and insert the card in line with the arrow marked on the
shredder mouth. Only shred 1 credit card at a time.
• For CD shredding, extend the sides of the CD guide, switch
the shredder to auto mode and place the CD into the centre
of the CD slot. Only shred 1 CD at a time.
• Empty the CD tray (where provided) after 8 credit cards or
CD’s to avoid waste spilling over into the paper waste bin.
Remove the CD tray before recommencing to shred paper.
Operation
• After unpacking the product, pull out the shredder bin or bag
frame (depending on model) and remove the CD shard tray,
which sits on top of the bag frame on departmental models
or bin on small office models. Store this tray on the external
location points (i) and use when you shred CD’s or credit
cards to separate waste for recycling (not applicable for
GSM128, GDM1013 and GDHS713 models).
• Connect shredder to mains supply.
• Ensure the on/off button on the back of the machine is in the
on position (d).
• To commence shredding, press the central Auto button (e).
This will illuminate the anti jam indicator.
This sets the shredder into auto mode and initiates the Jam
Free anti jam mechanism. The standby symbol will illuminate
blue and the anti-jam indicator will glow green.
You are now able to shred.
• Insert paper to be shredded into the feed area. The Jam Free
anti jam mechanism will sense the thickness of the paper
being shredded.
If the paper thickness is within the shredder’s capacity, the
motor will start and your documents will be shredded. Cutters
will stop once the shredding process is complete.
If the paper thickness is greater than the shredder’s sheet
capacity, the anti-jam indicator will turn from green to red
and the motor will not run.
• If this happens, remove some of the sheets from the paper
stack and re-try until the anti-jam indicator reverts back to
green, the shredder will then automatically start and allow
the paper to be shredded.
• If the shredder is left in auto mode for more than 2 minutes
without being used, the shredder will automatically turn back
to standby mode in order to save power.
• The shredder will automatically ‘wake up’ from sleep mode
when paper is inserted into the shredder mouth. There is no
need to press the Auto button (e).
Loading...