Gaylord VH2 User Manual

MODEL "VH2" SERIES

TYPE II VAPOR HOOD

GENERAL SPECIFICATIONS

Furnish Gaylord model “VH2-____” Type II vapor hood as
shown on the plans and in accordance with the following
specications.

The hood shall be constructed of minimum 18 gauge stainless
steel type 300 series, number 4 nish and contain a bae for
collecting condensed moisture from the hood. The hood shall
incorporate a perimeter gutter with a ½" drain stub out. The
hood shall include two full length hanging brackets with holes
pre-punched 12" on centers. The exhaust volume and duct
size shall be as indicated on the plans.

The hood shall meet all requirements of the IMC (International
Mechanical Code) and constructed in strict compliance with
NSF standard number 2.

o Optional Light: The hood shall include 100 watt incandes­cent light xture(s) pre-wired to a single connection point.
The light shall be UL Listed for commercial hoods and wired in
accordance with the latest edition of the NEC (National Electri­cal Code).

ITEM NO. _______________

FEATURES:

• All Stainless Steel Construction

• Condensate Bae

• Perimeter Gutter With Drain

• Meets All Requirements Of The IMC

(International Mechanical Code)

• Meets NSF Standard No. 2

• Optional Balancing Damper

• Optional Light Fixtures

o Optional Balancing Damper: The hood shall include a stain­less steel slide type balancing damper located at the duct
collar.

DESCRIPTION

The Gaylord Model “VH2” Series Vapor Hood is a Type
II hood designed specically for collecting moisture
generated by equipment such as dishwashers, steam
tables, bain maries, etc.

The hood is constructed of 18 gauge type 300 series
stainless steel number 4 nish. The hood includes a
condensing bae that drains o the extracted moisture,
and a full perimeter gutter with drain. Also included are
two full length brackets with pre-punched holes on 12"
centers providing multiple hanging points for easy instal­lation. The units are available in standard lengths from
3'-0" to 12'-0" and depths from 36" to 60" in 6" increments.
For lengths longer than 12'-0", two or more units of equal
length are joined together.

A slide type balancing damper located at the duct collar is
available as an option.

GAYLORD INDUSTRIES

10900 SW AVERY ST • TUALATIN, OREGON 97062 U.S.A.

PHONE: [phone] • FAX: [phone] • email: [e-mail]

www.gaylordusa.com

PROJECT NAME: ______________

EXHAUST

CFM
DUCT SIZE
STATIC PRESSURE

ITEM NO.: ____________________
MODEL "VH2" SERIES

TYPE II VAPOR HOOD

o MODEL VH2-W (WALL MOUNT)
o MODEL VH2-I (ISLAND STYLE)

OPTIONS

o 100 WATT INCANDESCENT LIGHT
o SLIDING BALANCING DAMPER

The manufacturer reserves the right to modify the materials and specifications resulting
from a continuing program of product improvement or the availability of new materials

Model "VH2"

Determining Exhaust Volumes

DUCT SIZE CHART

VOLUMES UP TO: (CFM) DUCT SIZE

750 10 X 6

1500 10 X 12

APPLICATION

Dishwasher Wall 100 0.25

Dishwasher Island 100 0.25

WALL/

ISLAND

CFM/

Lin. Ft

2250 10 X 18

3000 10 X 24

3750 10 X 30

4500 10 X 36

Hanging Weight

Ventilator Width 36" 42" 48” 54” 60”

Wt. lineal ft. Lbs. 40 45 50 55 60

Form No. VH2 0511-30723 © Copyright 2011, Gaylord Industries Litho USA

Light Duty Cooking Wall 200 0.25

Light Duty Cooking Island 400 0.25

The above Exhaust Volumes are based upon International

Mechanical Code 2006

STATIC

PRESSURE

(" W.G.)