Garmin Vector Owner's Manual

™

Vector

Owner’s Manual

August 2013 190-01450-00_0A Printed in Taiwan

All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of Garmin. Garmin reserves the right to change or improve its products and to make changes in the content of this manual without obligation to notify any person or organization of such changes or improvements. Go to www.garmin.com for current updates and supplemental information concerning the use of this product.

Garmin®, Edge®, and the Garmin logo are trademarks of Garmin Ltd. or its subsidiaries, registered in the USA and other countries. ANT+™, ANT Agent™, Garmin Connect™, USB ANT Stick™, and Vector™ are trademarks of Garmin Ltd. or its subsidiaries. These trademarks may not be used without the express permission of Garmin.

Exustar™ is a trademark of Exustar Enterprise Co. Ltd. Windows® is a registered trademark of Microsoft Corporation in the United States and other countries.Mac® is a registered trademark of Apple Computer, Inc. Other trademarks and trade names are those of their respective owners. Training Stress Score™ (TSS), Intensity Factor™ (IF), and Normalized Power™ (NP) are trademarks of Peaksware, LLC.

This product is ANT+™ certified. Visit www.thisisant.com/directory for a list of compatible products and apps.

Introduction.................................................................... 1

Thank You.................................................................................. 1

Getting Started........................................................................... 1

Tools Needed............................................................................. 1

Installing Vector Components.................................................... 1

Preparing the Crank Arms..................................................... 1

Determining Pedal Pod Clearance........................................ 1

Determining the Bicycle Chain Clearance............................. 1

Installing the Pedal Pod and Pedal....................................... 1

Installing the Shoe Cleats..................................................... 2

Adjusting the Release Tension............................................. 2

Pairing Vector with Your Edge 810 or 510 Device..................... 2

Your First Ride........................................................................... 2

Entering the Crank Length.................................................... 2

Setting the Installation Angle................................................. 2

Performing a Static Zero Calibration..................................... 2

Calibrating Vector Before Each Ride.................................... 2

Customizing the Data Fields................................................. 3

Training........................................................................... 3

Pedal-Based Power................................................................... 3

Maintenance Tips....................................................................... 3

Vector Data..................................................................... 3

Sending Your Ride to Garmin Connect...................................... 3

Garmin Connect.................................................................... 3

Disconnecting the USB Cable............................................... 3

Device Information.........................................................3

Vector Device Care.................................................................... 3

Removing the Pedal Pod and Pedal.......................................... 4

Replacing the Pedals and Cartridges........................................ 4

Vector Storage........................................................................... 4

Vector Specifications................................................................. 4

USB ANT Stick™ Specifications................................................ 4

Battery Information..................................................................... 4

Replacing the Pedal Pod Battery.......................................... 5

Appendix.........................................................................5

Registering Vector..................................................................... 5

Edge 800 Device Instructions.................................................... 5

Pairing Vector with the Edge 800 Device.............................. 5

Calibrating Vector with the Edge 800 Device........................ 5

Edge 500 Device Instructions.................................................... 5

Pairing Vector with the Edge 500 Device.............................. 5

Calibrating Vector with the Edge 500 Device........................ 5

Customizing the Data Fields................................................. 6

Power Data Fields...................................................................... 6

Troubleshooting......................................................................... 6

Updating the Software Using Vector Updater....................... 6

Third-Party Devices............................................................... 6

Index................................................................................7

Table of Contents i

+ 8 hidden pages