All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of Garmin. Garmin reserves the right to change or improve its
products and to make changes in the content of this manual without obligation to notify any person or organization of such changes or improvements. Go to www.garmin.com for current updates
and supplemental information concerning the use of this product.
Garmin® and the Garmin logo are trademarks of Garmin Ltd. or its subsidiaries, registered in the USA and other countries. These trademarks may not be used without the express permission of
Garmin.
Garmin Drive™, Garmin Express™, and myTrends™ are trademarks of Garmin Ltd. or its subsidiaries. These trademarks may not be used without the express permission of Garmin.
ACSI™ is a trademark of Auto Camper Service International Holding B.V. Android™ is a trademark of Google Inc. Apple®, iPhone®, and Mac® are trademarks of Apple Inc, registered in the U.S.
and other countries. The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc., and any use of such word mark or logo by Garmin is under license. Foursquare® is a trademark of
Foursquare Labs, Inc. in the U.S. and in other countries. HISTORY® and the H logo are trademarks of A+E Networks and are protected in the United States and other countries around the globe.
All Rights Reserved. Used with Permission. microSD® and the microSDHC logo are trademarks of SD-3C, LLC. PlanRV™ is the trademark of TruckDown Info International, Inc. TripAdvisor® is a
registered trademark of TripAdvisor LLC. Wi‑Fi® is a registered mark of Wi-Fi Alliance Corporation. Windows® is a registered trademark of Microsoft Corporation in the United States and other
countries.
• Adjust the volume (Garmin® Overview, page 1) and display
brightness (Adjusting the Screen Brightness, page 2).
• Set up a vehicle profile for your camper (Adding a Vehicle
Profile, page 3).
• Navigate to your destination (Starting a Route, page 11).
Garmin® Overview
Mounting and Powering the Garmin Device
in Your Vehicle
WARNING
This product contains a lithium-ion battery. To prevent the
possibility of personal injury or product damage caused by
battery exposure to extreme heat, store the device out of direct
sunlight.
Both the device and its mount contain magnets. Under certain
circumstances, magnets may cause interference with some
internal medical devices, including pacemakers and insulin
pumps. Keep the device and its mount away from such medical
devices.
NOTICE
Both the device and its mount contain magnets. Under certain
circumstances, magnets may cause damage to some electronic
devices, including hard drives in laptop computers. Use caution
when the device or its mount is near electronic devices.
Before you use your device on battery power, you should charge
it.
Plug the vehicle power cable into the mini-USB port on the
1
mount.
Microphone for hands-free calling
Microphone for dash camera recording
Volume control
Camera
Power key
Micro USB power and data port
Map and data memory card slot
3.5mm audio jack
Magnetic mount interface with 14 pin connector
Speaker
Dash cam memory card below access panel (Replacing the Dash
Cam Memory Card, page 4)
Press the mount onto the suction cup until it snaps into
2
place.
NOTE: The mount and suction cup may already be
assembled in the package.
The Garmin logo on the mount should face right-side up. It is
easiest to connect the mount and suction cup when the
hinged arm on the suction cup is closed. The mount and
suction cup fit tightly, and you may need to press hard to
connect them.
Press the suction cup to the windshield, and flip the lever
3
back toward the windshield.
Place the back of the device onto the magnetic mount.
4
Select an option:
5
• If your power cable has a vehicle power plug, plug it into a
power outlet in your vehicle.
• If your power cable has bare wire connectors, follow the
wiring diagram included with your cable to connect the
cable to vehicle power.
Turning the Device On or Off
• To turn the device on, press the power key , or connect the
device to power.
Getting Started1
• To put the device in power saving mode, press the power key
while the device is on.
While in power saving mode, the screen is off and the device
uses very little power, but it can wake instantly for use.
TIP: You can charge your device faster by putting it in power
saving mode while charging the battery.
• To turn off the device completely, hold the power key until a
prompt appears on the screen, and select Power Off.
Acquiring GPS Signals
When you turn on your navigation device, the GPS receiver
must collect satellite data and establish the current location. The
time required to acquire satellite signals varies based on several
factors, including how far you are from the location where you
last used your navigation device, whether you have a clear view
of the sky, and how long it has been since you last used your
navigation device. The first time you turn on your navigation
device, it may take several minutes to acquire satellite signals.
Turn on the device.
1
Verify appears in the status bar, and enable location
2
services if it does not.
If necessary, go to an open area with a clear view of the sky,
3
away from tall buildings and trees.
Acquiring Satellites appears at the top of the navigation map
until the device determines your location.
Home Screen
NOTE: The home screen layout may vary if it has been
customized.
• Select an app shortcut from the home screen.
• Select , select a tab, and select an app.
Adding Shortcuts to the Home Screen
Select .
1
Select an app tab to view additional applications.
2
Hold an application, and drag it to a location on the home
3
screen.
Viewing Notifications
Swipe down from the top of the screen.
1
The list of notifications appears.
Select an option:
2
• To launch the action or app mentioned in the notification,
select the notification.
• To dismiss a notification, swipe the notification to the right.
Status Bar Icons
The status bar is located at the top of the main menu. The status
bar icons display information about features on the device.
Location services is enabled.
Bluetooth® technology is enabled.
Connected to a Bluetooth device.
Connected to a Wi‑Fi® network (Connecting to a Wireless Network,
page 21).
Active vehicle profile. Swipe down twice and select to view the
vehicle profile settings.
Battery charge level.
Using the Touchscreen
• Tap the screen to select an item.
• Drag or swipe your finger across the screen to pan or scroll.
• Pinch two fingers together to zoom out.
• Spread two fingers apart to zoom in.
Adjusting the Screen Brightness
The device uses an ambient light sensor to adjust the screen
brightness to your vehicle conditions automatically. You can also
adjust the brightness manually, using either the notification
panel or the settings menu.
Select an option:
1
• Swipe down twice from the top of the screen to expand
the quick settings in the notification panel.
• Select Settings > Display > Brightness Level.
Use the slider bar to adjust the brightness.
2
Vehicle Profiles
Swipe down to view notifications.
Swipe down twice to quickly change settings and backlight
brightness.
Hold to customize the wallpaper or add widgets to the home
screen.
Select to open the app drawer. The app drawer contains shortcuts
to all the apps installed on your device.
Opening an App
The home screen contains shortcuts for frequently used apps.
The app drawer contains all the apps installed on your device,
organized into two tabs. The Navigation tab contains Garmin
apps useful for navigation, dispatching, and hours of service
recording. The Tools tab contains apps useful for
communication and other tasks.
Select an option to open an app:
2Vehicle Profiles
Entering your vehicle profile characteristics does not guarantee
that your vehicle's characteristics will be accounted for in all
route suggestions or that you will receive the warning icons in all
cases. Limitations may exist in the map data such that your
device cannot account for these restrictions or road conditions in
all cases. Always defer to all posted road signs and road
conditions when making driving decisions.
Routing and navigation are calculated differently based on your
vehicle profile. The activated vehicle profile is indicated by an
icon in the status bar. The navigation and map settings on your
device can be customized separately for each vehicle type.
When you activate a camper vehicle profile, the device avoids
including restricted or impassable areas in routes based on the
dimensions, weight, and other characteristics you entered for
your vehicle.
WARNING
Adding a Vehicle Profile
You should add a vehicle profile for each camper to be used
with your device.
Select Vehicle.
1
Select your vehicle type:
2
• To add a motorhome with a permanently attached
camper, select Motorhome.
• To add a motorhome pulling a trailer, select Motorhome with Trailer.
• To add a camper pulled behind a passenger vehicle,
select Vehicle with Trailer.
If necessary, select your trailer type:
3
• To add a camper pulled using a standard hitch, select
Travel Trailer.
• To add a camper pulled using a fifth-wheel hitch, select
Fifth Wheel.
NOTE: This trailer type is not available in all areas.
• To add a boat trailer pulled using a standard hitch, select
Boat Trailer.
• To add a trailer pulled using a standard hitch, select
Trailer.
Follow the on-screen instructions to enter the vehicle
4
characteristics.
After you add a vehicle profile, you can edit the profile to enter
additional detailed information (Editing a Vehicle Profile,
page 3).
Car Profile
The car profile is a preloaded vehicle profile intended for use in
an automobile without a trailer. While using the car profile, the
device calculates standard automobile routes, and routing for
large vehicles is not available. Some features and settings
specific to large vehicles are not available while using the car
profile.
Switching the Vehicle Profile
You can manually switch to another vehicle profile at any time.
Select an option:
1
• Select Vehicle.
• Swipe down twice from the top of the screen, and select
the vehicle profile icon, such as or .
Select a vehicle profile.
2
The vehicle profile information appears, including
measurements and weight.
Select Select.
3
Editing a Vehicle Profile
You can change basic vehicle profile information or add detailed
information to a vehicle profile, such as maximum speed.
Select Vehicle.
1
Select the vehicle profile to edit.
2
Select an option:
3
• To edit the vehicle profile information, select , and select
a field to edit.
• To rename a vehicle profile, select > > Rename Profile.
• To delete the vehicle profile, select > > Delete.
Adding Propane Tanks
NOTE: This feature is not available on all product models.
When you add your propane tanks to your vehicle profile, the
device avoids routing through areas with propane tank
restrictions that may affect your route. The device also alerts
you when you approach areas that require you to shut off your
propane tanks.
From the vehicle profile, select > Propane Tanks > Add
1
Tank.
Enter the weight of the propane tank, and select Save.
2
Dash Cam
Aligning the Camera
WARNING
Do not attempt to align the camera while driving.
You should align the dash camera each time you mount or
reposition the device.
Select Dash Cam.
1
Tilt the device to align the camera.
2
The crosshairs should point straight ahead, and the horizon
line should be centered between the top and bottom of the
screen.
TIP: If the suction cup appears in the dash cam field of view,
you should move the hinged arm toward the suction cup.
Dash Cam Controls
NOTICE
Some jurisdictions regulate or prohibit use of this device. It is
your responsibility to know and comply with applicable laws and
rights to privacy in jurisdictions where you plan to use this
device.
You can control the dash cam using either the dash cam app or
the notification panel.
Select > Dash Cam, or swipe down from the top of the
screen.
Select to save a dash cam recording.
Select to stop dash cam recording.
Select to start dash cam recording.
Select to enable audio recording.
Select to disable audio recording.
Dash Cam Recording
• While the dash cam is recording, it records continuously,
overwriting the oldest, non-saved video.
• You can start and stop dash cam recording using the dash
cam controls (Dash Cam Controls, page 3).
• If you enable the Auto Record option (Dash Cam Settings,
page 20), the dash cam starts recording automatically when
the device receives power through the powered mount. This
is most useful when the mount is connected to an ignition
switched power source.
• When the device is removed from the mount or the mount
loses power, the dash cam stops recording automatically
after a 15 second delay.
Saving a Dash Cam Recording
You can save a portion of the recorded video to prevent it from
being overwritten by new video.
While the dash cam is recording, select > Dash Cam > .
1
The device saves the video footage before, during, and after
you select .
Select again to extend the saved recording time (optional).
2
A message indicates the amount of video footage to be
saved.
Dash Cam3
The memory card has limited storage. After you save a video
recording, you should transfer the recording to your computer or
other external storage location for permanent storage (Dash
Cam Videos on Your Computer, page 4).
Turning Audio Recording On or Off
NOTICE
Some jurisdictions may regulate or prohibit recording audio with
this device. It is your responsibility to know and comply with
applicable laws and rights to privacy in jurisdictions where you
plan to use this device.
The device can record audio using the integrated microphone
while recording video. You can turn audio recording on or off at
any time.
Select > Dash Cam.
1
Select or .
2
Using the Dash Cam Gallery
You can use the dash cam gallery to view recorded dash cam
video, delete unneeded videos, and save a clip from the
unsaved video footage.
NOTE: The device stops recording video while you view videos.
Select > Dash Cam Gallery > OK.
1
Select a saved video, or select Unsaved.
2
The video starts playing automatically.
Select an option:
3
• To save a clip of unsaved video footage, use the slider to
select the video segment to save, and select .
The device saves the segment of video between the
orange pointers on the slider.
• To delete a video, select .
Deleting a Video or Photo Using Your Smartphone
When you are viewing the list of saved videos or photos on
1
your smartphone, select Select.
Select one or more files.
2
Select .
3
Trimming and Exporting a Video
You can trim the length of your video to remove unnecessary
footage before exporting it.
From the Garmin Drive app, select Review Footage.
1
Select a video.
2
Drag the handles on the video progress bar left or right to
3
trim the video length.
Select Export.
4
NOTE: You must keep the app in the foreground when
exporting a video.
The app exports the trimmed video to your smartphone.
Replacing the Dash Cam Memory Card
You can replace the dash cam memory card to increase the
storage capacity or to replace a card that has reached the end
of its useful life. The dash cam requires a microSD® memory
card from 4 to 64 GB with a speed rating of Class 10 or higher.
Press on the two marked areas, and slide the back panel
1
down to open it.
Dash Cam Videos on Your Computer
Videos and photos are stored in the DCIM folder on the camera
memory card. Videos are stored in MP4 file format, and photos
are stored in JPG format. You can view and transfer photos and
videos by connecting the memory card or the device to your
computer (Connecting the Device to Your Computer, page 24).
The videos and photos are sorted into several folders.
100EVENT: Contains videos saved automatically when the
device detected an incident.
101SAVED: Contains videos saved manually by the user.
104UNSVD: Contains unsaved video footage. The device
overwrites the oldest unsaved video when the storage space
for unsaved video is full.
Viewing Videos and Photos on Your
Smartphone
Before you can view videos and photos on your smartphone,
you must pair your Garmin device with the Garmin Drive™ app
(Pairing with Your Smartphone, page 15).
NOTE: The device stops recording and alerts are disabled while
viewing videos or photos.
From the Garmin Drive app on your smartphone, select
1
Review Footage.
Select an option:
2
• To view a photo or video you saved, select a file from the
Saved Footage category.
• To view recent video footage that has not been saved,
select a video from the Temporary Footage category.
Locate the memory card slot .
2
Press the existing memory card in until it clicks, and release
3
it.
The existing memory card ejects from the slot.
Remove the existing card from the slot
4
Insert the new memory card into the slot.
5
Press the card in until it clicks.
6
Replace the panel, and slide it upward until the panel clicks
7
into place.
Formatting the Dash Cam Memory Card
The dash cam requires a memory card formatted using the
FAT32 file system. You can use the device to format your card
using this file system.
You should format your memory card at least one time every 6
months to help extend the useful life of the memory card. You
must also format a brand new memory card if it is not formatted
using the FAT32 file system.
NOTE: Formatting the memory card deletes all videos, photos,
and data on the card.
Select > Navigation > Dash Cam Gallery.
1
Select > Format memory card.
2
Driver Awareness Features and Alerts
CAUTION
The driver alerts and speed limit features are for information
only and do not replace your responsibility to abide by all posted
4Driver Awareness Features and Alerts
speed limit signs and to use safe driving judgment at all times.
Garmin is not responsible for any traffic fines or citations you
receive for failing to follow all applicable traffic laws and signs.
Your device provides features that can help encourage safer
driving and increase efficiency, even when you are driving in a
familiar area. The device plays an audible tone or message and
displays information for each alert. You can enable or disable
the audible tone for some types of driver alerts. Not all alerts are
available in all areas.
Schools: The device plays a tone and displays the speed limit
(if available) for an upcoming school or school zone.
Speed limit exceeded: The device plays a tone and displays a
red border on the speed limit icon when you exceed the
posted speed limit for the current road.
Speed limit change: The device plays a tone and displays the
upcoming speed limit so you can be prepared to adjust your
speed.
Railroad crossing: The device plays a tone to indicate an
upcoming railroad crossing.
Animal crossing: The device plays a tone to indicate an
upcoming animal crossing area.
Curves: The device plays a tone to indicate a curve in the road.
Slower traffic: The device plays a tone to indicate slower traffic
when you approach slower traffic at a higher speed. Your
device must be receiving traffic information to use this feature
(Traffic, page 17).
Risk of grounding: The device plays a tone and displays a
message when you approach a road where your vehicle
could become grounded.
Lateral wind: The device plays a tone and displays a message
when you approach a road where there is risk of lateral wind.
Narrow road: The device plays a tone and displays a message
when you approach a road that may be too narrow for your
vehicle.
Steep hill: The device plays a tone and displays a message
when you approach a steep hill.
State and country borders: The device plays a tone and
displays a message when you approach the border of a state
or country.
Shut off propane: The device plays a tone and displays a
message when you approach an area where propane should
be turned off.
Forward collision warning: The device alerts you when it
detects that you are not maintaining a safe distance between
your vehicle and the vehicle in front of you (Forward Collision
Warning System, page 5).
Lane departure warning: The device alerts you when it detects
you may be crossing a lane boundary unintentionally (Lane
Departure Warning System, page 6).
Enabling or Disabling Driver Alerts
You can enable or disable several types of driver alerts.
Garmin is not responsible for the accuracy of or the
consequences of using a red light or speed camera database.
NOTE: This feature is not available for all regions or product
models.
Information about red light and speed camera locations is
available in some areas for some product models. The device
alerts you when you approach a reported speed or red light
camera.
• In some areas, your device can receive live red light and
speed camera data while connected to a smartphone running
the Garmin Drive app.
• You can use the Garmin Express™ software (garmin.com
/express) to update the camera database stored on your
device. You should update your device frequently to receive
the most up-to-date camera information.
Advanced Driver Assistance System
Your device includes an advanced driver assistance system
(ADAS), which uses the integrated dash camera to provide
warnings and alerts about your driving environment.
You can enable or disable each of the advanced driver
assistance features in the Driver Assistance settings (Driver
Assistance Settings, page 20).
Forward Collision Warning System
WARNING
The forward collision warning system (FCWS) feature is for
information only and does not replace your responsibility to
observe all road and driving conditions, abide by all traffic
regulations, and use safe driving judgment at all times. The
FCWS relies on the camera to provide a warning of upcoming
vehicles and, as a result, may have limited functionality in low
visibility conditions. For more information, go to garmin.com
/warnings.
NOTE: This feature is not available in all areas or for all product
models.
The FCWS feature alerts you when the device detects that you
are not maintaining a safe distance between your vehicle and
the vehicle in front of you. The device determines your vehicle
speed using GPS, and it calculates an estimated safe following
distance based on your speed. The FCWS activates
automatically when your vehicle speed exceeds 48 km/hr
(30 mph).
When the device detects that you are too close to the vehicle
ahead of you, the device plays an audible alert, and a warning
appears on the screen.
Forward Collision Warning System Performance Tips
Several factors affect the performance of the forward collision
warning system (FCWS). Some conditions may prevent the
FCWS feature from detecting a vehicle ahead of you.
• The FCWS feature activates only when your vehicle speed
exceeds 50 km/h (30 mph).
• The FCWS feature may not detect a vehicle ahead of you
when the camera's view of the vehicle is obscured by rain,
fog, snow, sun or headlight glare, or darkness.
• The FCWS feature may not function properly if the camera is
incorrectly aligned (Aligning the Camera, page 3).
• The FCWS feature may not detect vehicles greater than 40 m
(130 ft.) away or closer than 5 m (16 ft.).
• The FCWS feature may not function properly if the camera
placement settings do not correctly indicate your vehicle
height or the placement of your device in the vehicle (Aligning
the Camera, page 3).
Driver Awareness Features and Alerts5
Lane Departure Warning System
WARNING
The lane departure warning system (LDWS) feature is for
information only and does not replace your responsibility to
observe all road and driving conditions, abide by all traffic
regulations, and use safe driving judgment at all times. The
LDWS relies on the camera to provide warnings for lane
markers and, as a result, may have limited functionality in low
visibility conditions. For more information, go to garmin.com
/warnings.
The LDWS feature alerts you when the device detects you may
be crossing a lane boundary unintentionally. For example, the
device alerts you if you cross some solid painted lane
boundaries. The LDWS feature provides alerts only when your
vehicle speed exceeds 64 km/h (40 mph). The alert appears on
the left or right side of the screen to indicate which lane
boundary you crossed.
Warning and Alert Symbols
WARNING
Entering your vehicle profile characteristics does not guarantee
that your vehicle's characteristics will be accounted for in all
route suggestions or that you will receive the warning icons in all
cases. Limitations may exist in the map data such that your
device cannot account for these restrictions or road conditions in
all cases. Always defer to all posted road signs and road
conditions when making driving decisions.
Warning and alert symbols may appear on the map or in route
directions to alert you to potential hazards and road conditions.
Restriction Warnings
Height
Weight
Length
Width
Trailer height
Trailer weight
Trailer length
Trailer width
No boat trailers allowed
No campers allowed
No trailers allowed
No propane
No left turn
No right turn
No U turn
NOTE: For the best LDWS performance, you should set the
Camera Placement option to indicate the location of the device
in your vehicle.
Setting the Camera Placement
You can mount the device in the left, center, or right of your
windshield or dash. For the best LDWS performance, you
should set the Camera Placement option to indicate the location
of your device in the vehicle.
Select Settings > Dash Cam > Camera Placement >
1
Horizontal Position.
Select the location of the device.
2
Lane Departure Warning Performance Tips
Several factors affect the performance of the lane departure
warning system (LDWS). Some conditions may prevent the
LDWS feature from detecting lane departures.
• The LDWS feature provides alerts only when your vehicle
speed exceeds 65 km/h (40 mph).
• The LDWS feature may not function properly if the camera is
incorrectly aligned.
• The LDWS feature may not function properly if the camera
placement settings do not correctly indicate your vehicle
height or the placement of your device in the vehicle (Aligning
the Camera, page 3).
• The LDWS feature requires a clear, continuous view of the
lane divider lines.
◦ Lane departures may not be detected when divider lines
are obscured by rain, fog, snow, extreme shadows, sun or
headlight glare, road construction, or any other visual
obstruction.
◦ Lane departures may not be detected if lane divider lines
are misaligned, missing, or heavily worn.
• The LDWS feature may not detect lane departures on
extremely wide, narrow, or winding roads.
Road Condition Warnings
Risk of grounding
Lateral wind
Narrow road
Sharp curve
Steep down hill
Tree overhang
Alerts
Weigh station
Road not verified for motorhomes
Finding and Saving Locations
The maps loaded in your device contain locations, such as
restaurants, hotels, auto services, and detailed street
information. The Where To? menu helps you find your
destination by providing several methods to browse, search, and
save this information.
From the main menu, select Where To?.
• To quickly search all locations on your device, select Enter Search (Finding a Location Using the Search Bar, page 7).
• To find an address, select Address (Finding an Address,
page 7).
• To browse or search pre-loaded points of interest by
category, select Categories (Finding a Location by Category,
page 8).
• To search near a different city or area, select next to the
current search area (Changing the Search Area, page 7).
• To view and edit your saved locations, select Saved (Saving
Locations, page 10).
6Finding and Saving Locations
• To view locations you have recently selected from the search
results, select Recent (Viewing Recently Found Locations,
page 10).
• To search for RV parks and campgrounds, select All Campgrounds(Finding Campgrounds, page 8).
• To browse, search, and check into Foursquare® points of
interest, select Foursquare (Searching Foursquare Points of
Interest, page 9).
• To browse and search TripAdvisor® points of interest and
reviews, select TripAdvisor (TripAdvisor, page 9).
• To browse and search HISTORY® points of interest, photos,
and information, select History® (Finding HISTORY Points
of Interest, page 8).
• To find national parks and explore park maps, select
National Parks (Finding National Parks, page 8).
• To navigate to specific geographic coordinates, select
Coordinates (Finding a Location Using Coordinates,
page 9).
Finding a Location Using the Search Bar
You can use the search bar to search for locations by entering a
category, brand name, address, or city name.
Select Where To?.
1
Select Enter Search in the search bar.
2
Enter all or part of the search term.
3
Suggested search terms appear below the search bar.
Select an option:
4
• To search for a type of business, enter a category name
(for example, "movie theaters").
• To search for a business name, enter all or part of the
name.
• To search for an address near you, enter the house
number and street name.
• To search for an address in another city, enter the house
number, street name, city, and state.
• To search for a city, enter the city and state.
• To search for coordinates, enter latitude and longitude
coordinates.
Select an option:
5
• To search using a suggested search term, select the term.
• To search using the text you entered, select .
If necessary, select a location.
6
Finding an Address
NOTE: The order of the steps may change depending on the
map data loaded on your device.
Select Where To?.
1
If necessary, select to search near a different city or area.
2
Select Address.
3
Follow the on-screen instructions to enter address
4
information.
Select the address.
5
Select a location to view the option menu.
Select to view detailed information about the selected location.
Select to find parking areas near the location.
Select to view alternate routes to the locations.
Select to start navigating to the location using the
Go!
recommended route.
Select to view the search results on the map.
Changing the Search Area
By default, the device searches for locations near your current
location. You can also search other areas, such as near your
destination, near another city, or along your active route.
Select Where To?.
1
Select next to the current search area .
2
Select a search area.
3
If necessary, follow the on-screen instructions to select a
4
specific location.
The selected search area appears next to . When you search
for a location using any of the options in the Where To? menu,
the device suggests locations near this area first.
Location Search Results on the Map
You can view the results of a location search on the map instead
of in a list.
From the location search results, select . The nearest location
appears at the center of the map, and basic information about
the selected location appears at the bottom of the map.
Location Search Results
By default, the location search results appear in a list, with the
nearest location at the top. You can scroll down to view more
results.
Finding and Saving Locations7
Loading...
+ 23 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.