International (503) 391-3411
Canada 800-654-3415
USA 800-525-6726
http://www.garminat.com
FAX (503) 364-2138
Salem, OR 97302
2345 Turner Rd., S.E.
September 2003
P/N 561-0236-03 Rev A
ENTER to fly direct to the wpt.
4. Press DIRECT-TO and then
All Rights Reserved
Printed in the U.S.A.
1999-2003 by Garmin AT, Inc.
your flight plan.
9. Press SEL to stop editing
nearby waypoints.
3. Turn the SMALL knob to view
Wpt type.
2. Turn the LARGE knob to change
1. Press NRST.
Emergency Search
to exit.
7. Press INFO again or ENTER
information.
6. Turn the SMALL knob to view
5. Press INFO.
SMALL knob to select characters.
desired character and turn the
4. Turn the LARGE knob to the
waypoint type.
3. Turn the SMALL knob to select
press ENTER.
Access Database page and
2. Turn the LARGE knob to the
1. Press DB.
Finding Info On A Waypoint
finished.
and repeat steps 5-7 until
the next waypoint. Press ENTER
5. Press ENTER when finished.
Lat/Lon and runway length.
necessary characters for the
4. Continue to select the
the waypoint name.
knob to move the cursor to set
characters and turn the LARGE
3. Use the SMALL to select
page and then press ENTER.
Create User Wpt By Lat/Lon
2. Turn LARGE knob to the
1. Press DB.
Creating A New Waypoint
8. The INS? prompt will flash for
name and then press ENTER.
knobs to select the waypoint
7. Use the SMALL and LARGE
next character.
LARGE knob cw to move to the
the first character. Turn the
6. Turn the SMALL knob to select
ENTER.
plan. At the INS? prompt, press
inserting waypoints into the flight
5. Turn the SMALL knob to start
complete.
4. Press ENTER when the name is
to move to the next character.
press ENTER.
select the desired option and
3. Turn the SMALL knob to
press SEL.
desired active flight plan and
2. Turn the LARGE knob to the
1. Press FPL.
Activating a Flight Plan
characters. Turn the LARGE knob
3. Turn the SMALL knob to select
SEL.
2. To enter a new plan name, press
page and then press ENTER.
to the “Create New Flight Plan”
1. Press FPL. Turn LARGE knob
Creating a Flight Plan
Navigation (NAV)
Press NAV
ETE, CDI, BRG, &
RGE
RAIM*
Altitude Assist
Parallel Track (PTK)
GPS Position
Countdown Timer
Arc Assist
Turn LARGE Knob
From/To/Next (Dist)
From/To/Next (ETE)
From/To/Next (ETA)
From/To/Next (Wpt)
Tuned Station**
* GX60 only
** when configured
Press SEL to edit information or to select options.
SEL
Press ENTER to enter and save information. In the
ENTER
Comm function, ENTER saves the Standby frequency.
Press DIRECT-TO to define a direct course from
D
your present position to a selected waypoint.
Apollo GX60/65 Quick Reference Guide
Apollo GX60/65 Quick Reference Guide
Nearest Waypoint (NRST)
Press NRST
Airport (ARPT)
VOR
NDB
INT
LocDme
Turn LARGE Knob
User WPT
Search Around WPT
Runway Limits
SUA
Waypoint Information
(INFO)
Press INFO
Ident, Type,
& City/Facility Name
Bearing & Dist
Frequencies
Type & Elevation
Fuel
Map
Turn SMALL Knob
Runways
Approaches*
Lat/Lon
Sunrise/Sunset
WPT Comment
*GX60 when enabled
Map plus Nav
Map Only
SAR Map*
Map Setup
Turn LARGE Knob
Turn SMALL Knob
Moving Map (MAP)
Press MAP
Route Line, Map Orient,
& Map Reference
Symbol & ID Setup
Track History (On, Save, Int)
Track History (Strat, Clear, Used)
Airspace Setup
Airspace Buffers
ATC Ring
Airspace Types (B, C, MOA,
Training, Unknown, Alert,
Caution, Danger, Restricted,
Prohibited, & Warning)
SAR Setup*
SAR Position* * when enabled
Direct-To
1. Press DIRECT-TO. (Check the Direct-To options in System-Nav Info)
Press the indicated key and then
turn the LARGE knob to view the
pages shown. Turn the SMALL
knob for more info when available
(diamond shown).
2. Turn the SMALL knob to select waypoint type. Then turn LARGE knob to
the waypoint ident or name.
3. Use LARGE & SMALL knobs to select ident or name.
4. Press ENTER. Now, fly direct to the selected waypoint.
waypoint
Headphone Level
Sidetone Level
Intercom Level
Transmit
Intercom Squelch Mic2
Intercom Squelch Mic1
Noise Level
RF Signal Level
Comm Info
Turn LARGE Knob
Misc Sensors
Owner Name
GPS Normal Reset
Turn LARGE Knob
GPS Date & Time
Turn LARGE Knob
Fuel Info
Air Data Info
Encoding Altimeter
Satellite Search Status
Satellites Used for Fix
Satellites
Healthy & Visible
GPS Sensor
Press SYS. Turn LARGE Knob, then press ENTER.
Display Brightness
Turn LARGE Knob
Test Display
Baro Units
Fuel Units
Model, SW Ver, S/N
Date/Time
System Info
CDI Scaling
Direct-To
Turn LARGE Knob
Flight Timer Trigger
Mag Var
Program Nav Pages
Lat/Lon Units
Autonav Time
Nav Info
System (SYS)
frequencies for selected type
Turn the SMALL Knob to view
frequency types
Turn the LARGE Knob to view
Press RCL to recall stored frequencies
Press MEM to memorize Standby
Press MON to monitor Standby
Press <-> to toggle Active & Standby
Turn SMALL Knob to change kHz
Turn LARGE Knob to change MHz
Press COM
Comm Radio (COM)
GX60 Only
Create New FPL
Turn LARGE Knob
FPL #30
.
.
.
FPL #1
Active FPL
Press FPL
Flight Plan (FPL)
1. Follow prompts to turn to next leg
* when enabled
Intercept
Inbound Leg
Access Database
Turn SMALL Knob
Delete WPT Comment
Modify User WPT
Turn LARGE Knob
Delete User WPT
Create Wpt by User Grid*
Update User Wpt w/PPos
Create WPT by Radial/Dist
Create WPT by Lat/Lon
Press DB
Old Msg n
.
.
.
Old Msg 1
Old
Turn LARGE Knob
Turn SMALL Knob
New Msg n
.
.
.
New Msg 1
New
Press MSG
Messages (MSG) Database (DB)
2. Follow prompts for inbound leg intercept
1. Use DME-Arc page in NAV mode or Map mode to navigate
On Arc
GX60 Only
4. Use Nav or Map mode and follow information
prompts
Action
3. Verify or select DME-Arc Reference Waypoint and follow the
2. USE DME-Arc Page in NAV mode
1. Verify/Set OBS/HLD ON
Intercept
At Arc
Location
DME-Arc Checklist
6. Press NAV to return to Navigation Mode.
approach legs.
5. Turn the SMALL knob to display the
approach path.
4. Press ENTER to select the displayed
GX60 Only
Approach-Active
OFF to sequence
Verify OBS/HLD is ON
(CDI goes to 1.0 nm full-scale sensitivity)
(Approach Annunciator remains ON)
(Green Approach-Active annunciator turns OFF)
If NOT landing: Press OBS/HLD to cancel
(CDI goes to 0.3 nm full-scale sensitivity)
Verify Approach-Active annunciator is ON
Verify/Set OBS/HLD: OFF to sequence to MAP
Verify altimeter setting is entered
Verify green Approach-Active annunciator is ON
Verify/Set OBS/HLD: ON for Procedure Turn or Hold
Verify Approach annunciator is ON
(CDI goes to 1 nm full-scale sensitivity)
(Approach annunciator turns ON)
Enable Approach & enter altimeter setting
Load Approach
Location Action
Approach Checklist
MAHP Active Waypoint
At MAP (TO/FROM Transition)
At FAF (MAP Becomes Active)
FAF Active Waypoint
IAF Active Waypoint
Destination
Within 30 nm of
Enroute
available approach choices.
3. Turn the SMALL knob to display the
approach waypoints.
2. Press ENTER to prepare to load
press SEL while in the Nav function.
Flight Plan Mode and press SEL, or
1. Press FPL twice to reach the home page
B. Load Approach Information
approach capability.
must be an airport that has an established
to choose a destination. The destination
You may also use the DIRECT-TO button
Flight Plan, or edit the active Flight Plan.
Load a destination airport. Load a stored
A. Load Destination Airport
Approach Setup Summary