Garmin GPSMAP 8000 User Manual

GPSMAP® 8000 Glass Helm Series

Owner’s Manual

June 2014 190-01557-00_0C Printed in Taiwan

All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of Garmin. Garmin reserves the right to change or improve its products and to make changes in the content of this manual without obligation to notify any person or organization of such changes or improvements. Go to www.garmin.com for current updates and supplemental information concerning the use of this product.

Garmin®, the Garmin logo, BlueChart®, g2 Vision®, GPSMAP®, MapSource®, and Ultrascroll® are trademarks of Garmin Ltd. or its subsidiaries, registered in the USA and other countries. echoMAP™, Garmin Helm™, GMR™, GRID™, GSD™, GXM™, HomePort™, Meteor™, SmartMode™, and Shadow Drive™ are trademarks of Garmin Ltd. or its subsidiaries. These trademarks may not be used without the express permission of Garmin.

Android™ is a trademark of Google Inc. The Bluetooth® word mark is owned by the Bluetooth SIG, Inc. and any use of such marks by Garmin is under license. FLIR® is a registered trademark of FLIR Systems, Inc. FUSION-Link™ is a trademark of Fusion Electronics Ltd. iPod® is a trademark of Apple Inc., registered in the U.S. and other countries. NMEA®, NMEA 2000®, and the NMEA 2000 logo are registered trademarks of the National Marine Electronics Association. SiriusXM® is a registered trademark of SiriusXM Radio Inc. Wi‑Fi® is a registered mark of Wi-Fi Alliance Corporation. Windows® is a registered trademark of Microsoft Corporation in the United States and other countries. All other trademarks and copyrights are the property of their respective owners.

Introduction.................................................................... 1

GPSMAP 8000 Series Front View............................................. 1

Using the Touchscreen......................................................... 1

Locking the Touchscreen...................................................... 1

Downloading the Manuals.......................................................... 1

Getting More Information........................................................... 1

Tips and Shortcuts..................................................................... 1

Inserting a Memory Card........................................................... 1

Loading the New Software on a Memory Card.......................... 1

Updating the Device Software................................................... 1

GPS Satellite Signals................................................................. 2

Selecting the GPS Source.................................................... 2

Stations and Home Screens...................................................... 2

Customizing the Home Screen............................................. 2

Resetting the Station Layouts............................................... 2

Using the Garmin Helm™ Application with the Chartplotter...... 2

Setting the Vessel Type............................................................. 2

Customizing the Layout of a Page............................................. 2

Adjusting the Backlight............................................................... 2

Adjusting the Color Mode........................................................... 2

Charts and 3D Chart Views........................................... 2

Navigation Chart and Offshore Fishing Chart............................ 3

Zooming In and Out Using the Touchscreen........................ 3

Measuring a Distance on the Chart....................................... 3

Chart Symbols....................................................................... 3

Showing a Different Chart..................................................... 3

Viewing Location and Object Information on a Chart............ 3

Viewing Details about Navaids.............................................. 3

Navigating to a Point on the Chart........................................ 3

Premium Charts......................................................................... 4

Viewing Tide Station Information.......................................... 4

Animated Tide and Current Indicators.............................. 4

Showing and Configuring Tides and Currents.................. 4

Showing Satellite Imagery on the Navigation Chart.............. 4

Viewing Aerial Photos of Landmarks.................................... 5

Automatic Identification System................................................. 5

AIS Targeting Symbols......................................................... 5

Heading and Projected Course of Activated AIS Targets..... 5

Showing AIS and MARPA Vessels on a Chart or on a 3D

Chart View............................................................................. 5

Activating a Target for an AIS Vessel................................... 5

Viewing Information about a Targeted AIS Vessel........... 5

Deactivating a Target for an AIS Vessel.......................... 6

Viewing a List of AIS and MARPA Threats........................... 6

Setting the Safe-Zone Collision Alarm.................................. 6

AIS Distress Signals.............................................................. 6

Navigating to a Distress Signal Transmission.................. 6

AIS Distress Signal Device Targeting Symbols................ 6

Enabling AIS Transmission Test Alerts............................ 6

Turning Off AIS Reception.................................................... 6

Chart and 3D Chart View Settings............................................. 6

Navigation and Fishing Chart Setup..................................... 6

Waypoints and Tracks Settings on the Charts and Chart

Views..................................................................................... 7

Chart Appearance Settings................................................... 7

Other Vessels Settings on the Charts and Chart Views........ 7

Laylines Settings................................................................... 7

Fish Eye 3D Settings............................................................. 7

Waypoints, Routes, and Tracks....................................7

Waypoints.................................................................................. 7

Marking Your Present Location as a Waypoint..................... 7

Creating a Waypoint at a Different Location......................... 7

Marking an SOS Location..................................................... 7

Viewing a List of all Waypoints

Editing a Saved Waypoint..................................................... 8

Moving a Saved Waypoint.................................................... 8

Browsing for and Navigating to a Saved Waypoint............... 8

Deleting a Waypoint or an MOB............................................ 8

Deleting All Waypoints.......................................................... 8

Routes........................................................................................ 8

Creating and Navigating a Route From Your Present

Location................................................................................. 8

Creating and Saving a Route................................................ 8

Viewing a List of Routes........................................................ 8

Editing a Saved Route.......................................................... 8

Browsing for and Navigating a Saved Route........................ 9

Browsing for and Navigating Parallel to a Saved Route....... 9

Deleting a Saved Route........................................................ 9

Deleting All Saved Routes.................................................... 9

Tracks........................................................................................ 9

Showing Tracks..................................................................... 9

Setting the Color of the Active Track..................................... 9

Saving the Active Track........................................................ 9

Viewing a List of Saved Tracks............................................. 9

Editing a Saved Track........................................................... 9

Saving a Track as a Route.................................................... 9

Browsing for and Navigating a Recorded Track.................... 9

Deleting a Saved Track......................................................... 9

Deleting All Saved Tracks................................................... 10

Retracing the Active Track.................................................. 10

Clearing the Active Track.................................................... 10

Managing the Track Log Memory During Recording.......... 10

Configuring the Recording Interval of the Track Log........... 10

Synchronizing User Data Across the Garmin Marine Network 10

Deleting All Saved Waypoints, Routes, and Tracks................. 10

.............................................. 8

Navigation with a Chartplotter.................................... 10

Basic Navigation Questions..................................................... 10

Destinations............................................................................. 10

Searching for a Destination by Name................................. 10

Selecting a Destination Using the Navigation Chart........... 10

Searching for a Marine Services Destination...................... 11

Courses.................................................................................... 11

Setting and Following a Direct Course Using Go To........... 11

Setting and Following a Course Using Auto Guidance....... 11

Autopilot Navigation............................................................ 11

Recalculating the Auto Guidance Route........................ 11

Stopping Navigation................................................................. 11

Sonar............................................................................. 11

Sonar Views............................................................................. 12

Full-Screen Sonar View...................................................... 12

DownVü Sonar View........................................................... 12

SideVü Sonar View............................................................. 12

SideVü/DownVü Scanning Technology.......................... 12

Split-Zoom Sonar View....................................................... 12

Split-Frequency Sonar View................................................ 12

Changing the Sonar View................................................... 12

Creating a Waypoint on the Sonar Screen.............................. 12

Viewing Sonar History.............................................................. 12

Pausing the Sonar Display....................................................... 13

Viewing Sonar History.............................................................. 13

Sonar Sharing.......................................................................... 13

Selecting a Sonar Source................................................... 13

Renaming a Sonar Source.................................................. 13

Adjusting the Level of Detail.................................................... 13

Adjusting the Color Intensity.................................................... 13

Adjusting the Range of the Depth or Width Scale.................... 13

Setting the Zoom Level on the Sonar Screen.......................... 13

Setting the Scroll Speed.......................................................... 14

Table of Contents i

Sonar Frequencies................................................................... 14

Selecting Frequencies......................................................... 14

Creating a Frequency Preset.............................................. 14

Turning On the A-Scope.......................................................... 14

Selecting the Transducer Type................................................ 14

Sonar Setup............................................................................. 14

Sonar Settings..................................................................... 14

Sonar Noise Rejection Settings.......................................... 15

Sonar Appearance Settings................................................ 15

Sonar Alarm Settings.......................................................... 15

Advanced Sonar Settings.................................................... 15

Transducer Installation Settings.......................................... 15

Sonar Recordings.................................................................... 16

Recording the Sonar Display.............................................. 16

Stopping the Sonar Recording............................................ 16

Deleting a Sonar Recording................................................ 16

Playing Sonar Recordings................................................... 16

Radar............................................................................. 16

Radar Display Modes............................................................... 16

Changing the Radar Mode....................................................... 16

Transmitting Radar Signals...................................................... 16

Adjusting the Radar Range...................................................... 16

Tips for Selecting a Radar Range....................................... 16

Zooming In and Out of the Radar Screen................................ 17

Marking a Waypoint on the Radar Screen............................... 17

Sentry Mode............................................................................. 17

Enabling Timed Transmit.................................................... 17

Setting the Standby and Transmit Times............................ 17

Enabling a Guard Zone....................................................... 17

Defining a Circular Guard Zone.......................................... 17

Defining a Partial Guard Zone............................................. 17

Radar Targeting and MARPA.................................................. 17

MARPA Targeting Symbols................................................ 17

Assigning a MARPA Tag to an Object................................ 17

Viewing Information about a MARPA-tagged Object..... 17

Removing a MARPA Tag from a Targeted Object......... 17

Viewing a List of AIS and MARPA Threats......................... 17

Showing AIS Vessels on the Radar Screen........................ 18

VRM and EBL..................................................................... 18

Showing the VRM and the EBL...................................... 18

Adjusting the VRM and the EBL..................................... 18

Measuring the Range and Bearing to a Target Object... 18

Radar Overlay.......................................................................... 18

Radar Overlay and Chart Data Alignment........................... 18

Showing the Radar Overlay................................................ 18

Stopping the Transmission of Radar Signals........................... 18

Optimizing the Radar Display.................................................. 18

Radar Gain and Clutter....................................................... 18

Adjusting Gain on the Radar Screen Automatically....... 18

Adjusting Gain on the Radar Screen Manually.............. 19

Minimizing Nearby Large-Object Interference................ 19

Minimizing Side-Lobe Interference on the Radar

Screen............................................................................ 19

Adjusting Sea Clutter on the Radar Screen

Automatically.................................................................. 19

Adjusting Rain Clutter on the Radar Screen.................. 19

Reducing Cross Talk Clutter on the Radar Screen........ 19

Radar Display Settings........................................................ 19

Radar Appearance Settings................................................ 19

Front-of-Boat Offset............................................................ 20

Measuring the Potential Front-of-Boat Offset................. 20

Setting the Front-of-Boat Offset..................................... 20

Autopilot....................................................................... 20

Autopilot Screen....................................................................... 20

Engaging the Autopilot............................................................. 20

Adjusting the Heading with the Helm Adjusting the Heading with the Chartplotter in Step Steering

Mode................................................................................... 20

Adjusting the Heading with the Chartplotter in Rudder Steering Mode

Autopilot Settings..................................................................... 20

Selecting the Steering Mode............................................... 20

Adjusting the Step Steering Increment........................... 20

Setting the Power Saver..................................................... 20

Enabling Shadow Drive....................................................... 21

Adjusting Shadow Drive Sensitivity................................ 21

Direction Control................................................................. 21

Enabling Direction Control.............................................. 21

Using Direction Control.................................................. 21

Steering Patterns..................................................................... 21

Following the U-Turn Pattern.............................................. 21

Setting Up and Following the Circles Pattern...................... 21

Setting Up and Following the Zigzag Pattern...................... 21

Following the Williamson Turn Pattern................................ 21

Following an Orbit Pattern................................................... 21

Setting Up and Following the Cloverleaf Pattern................ 21

Setting Up and Following a Search Pattern........................ 21

Cancelling a Steering Pattern............................................. 21

Sailboat Autopilot Operation.................................................... 21

Wind Hold............................................................................ 21

Setting the Wind Hold Type............................................ 22

Engaging Wind Hold....................................................... 22

Engaging Wind Hold from Heading Hold........................ 22

Adjusting the Wind Hold Angle with the Autopilot.......... 22

Tack and Gybe.................................................................... 22

Tacking and Gybing from Heading Hold........................ 22

Tacking and Gybing from Wind Hold.............................. 22

Setting a Tack and Gybe Delay...................................... 22

Enabling the Gybe Inhibitor............................................ 22

..................................................................... 20

.................................. 20

Digital Selective Calling.............................................. 22

Networked Chartplotter and VHF Radio Functionality............. 22

Turning On DSC...................................................................... 22

DSC List................................................................................... 22

Viewing the DSC List.......................................................... 22

Adding a DSC Contact........................................................ 22

Incoming Distress Calls........................................................... 22

Navigating to a Vessel in Distress....................................... 22

Man-Overboard Distress Calls Initiated from a VHF Radio. 23 Man-Overboard and SOS Distress Calls Initiated from the

Chartplotter......................................................................... 23

Position Tracking..................................................................... 23

Viewing a Position Report................................................... 23

Navigating to a Tracked Vessel.......................................... 23

Creating a Waypoint at the Position of a Tracked Vessel... 23

Editing Information in a Position Report.............................. 23

Deleting a Position-Report Call........................................... 23

Viewing Vessel Trails on the Chart..................................... 23

Individual Routine Calls........................................................... 23

Selecting a DSC Channel................................................... 23

Making an Individual Routine Call....................................... 23

Making an Individual Routine Call to an AIS Target............ 23

Gauges and Graphs..................................................... 23

Viewing Engine and Fuel Gauges............................................ 24

Changing the Data Shown in a Gauge................................ 24

Customizing Engine Gauge and Fuel Gauge Limits........... 24

Enabling Status Alarms for Engine Gauges........................ 24

Enabling Some Engine Gauge Status Alarms.................... 24

Selecting the Number of Engines Shown in Gauges.......... 24

Customizing the Engines Shown in Gauges....................... 24

Setting the Fuel Capacity of the Vessel.............................. 24

ii Table of Contents

Synchronizing the Fuel Data with the Actual Vessel Fuel... 24

Setting the Fuel Alarm......................................................... 24

Viewing Trip Gauges................................................................ 24

Resetting Trip Gauges........................................................ 24

Viewing the Wind Gauges........................................................ 24

Configuring the Sailing Wind Gauge................................... 24

Configuring the Speed Source............................................ 24

Configuring the Heading Source of the Wind Gauge.......... 25

Customizing the Close-Hauled Wind Gauge....................... 25

Viewing Graphs........................................................................ 25

Setting the Graph Range and Time Scales......................... 25

Tide, Current, and Celestial Information....................25

Tide Station Information........................................................... 25

Current Station Information...................................................... 25

Celestial Information................................................................ 25

Viewing Tide Station, Current Station, or Celestial Information

for a Different Date................................................................... 25

Viewing Information for a Different Tide or Current Station..... 25

Viewing Almanac Information from the Navigation Chart........ 25

Sailing Features........................................................... 25

Setting the Vessel Type........................................................... 25

Laylines Settings...................................................................... 25

Setting the Keel Offset............................................................. 26

Sailboat Autopilot Operation.................................................... 26

Wind Hold............................................................................ 26

Setting the Wind Hold Type............................................ 26

Engaging Wind Hold....................................................... 26

Engaging Wind Hold from Heading Hold........................ 26

Adjusting the Wind Hold Angle with the Autopilot.......... 26

Tack and Gybe.................................................................... 26

Tacking and Gybing from Heading Hold........................ 26

Tacking and Gybing from Wind Hold.............................. 26

Setting a Tack and Gybe Delay...................................... 26

Enabling the Gybe Inhibitor............................................ 26

Warning Manager......................................................... 26

Viewing Messages................................................................... 26

Sorting and Filtering Messages............................................... 27

Saving Messages to a Memory Card....................................... 27

Clearing all of the Messages.................................................... 27

Media Player................................................................. 27

Opening the Media Player....................................................... 27

Icons.................................................................................... 27

Selecting the Media Source..................................................... 27

Connecting a Bluetooth® Wireless Device to the Meteor

Media Player....................................................................... 27

Playing Music........................................................................... 27

Browsing for Music.............................................................. 27

Enabling Alphabetical Search........................................ 27

Setting a Song to Repeat.................................................... 27

Setting All Songs to Repeat................................................ 27

Setting Songs to Shuffle...................................................... 27

Listening to the Radio......................................................... 27

Saving a Channel as a Preset........................................ 27

Removing a Channel Preset.......................................... 27

Changing the Tuning Mode............................................ 27

Setting the Tuner Region............................................... 27

Opening the MTP Source.................................................... 27

Adjusting the Volume............................................................... 28

Enabling and Disabling Zones............................................ 28

Muting the Media Volume................................................... 28

Scanning VHF Channels.......................................................... 28

Adjusting the VHF Squelch...................................................... 28

SiriusXM® Satellite Radio........................................................ 28

Locating a SiriusXM Radio ID............................................. 28

Activating a SiriusXM Subscription..................................... 28

Customizing the Channel Guide

Saving a SiriusXM Channel to the Presets List................... 28

Adjusting SiriusXM Satellite Radio Volume......................... 28

Unlocking SiriusXM Parental Controls................................ 28

Setting Parental Controls on SiriusXM Radio

Channels........................................................................ 28

Changing a Parental Passcode on a SiriusXM Radio.... 28

Restoring Default Parental Control Settings Values....... 28

Clearing All Locked Channels on a SiriusXM Radio...... 28

Setting the Device Name......................................................... 28

......................................... 28

SiriusXM Weather........................................................ 29

SiriusXM Equipment and Subscription Requirements............. 29

Weather Data Broadcasts........................................................ 29

Changing the Weather Chart................................................... 29

Viewing Precipitation Information............................................. 29

Precipitation Views.............................................................. 29

Storm Cell and Lightning Information....................................... 29

Hurricane Information.............................................................. 29

Weather Warnings and Weather Bulletins............................... 29

Forecast Information................................................................ 29

Viewing Forecast Information for Another Time Period...... 29

Weather Fronts and Pressure Centers............................... 30

Viewing a Marine Forecast or an Offshore Forecast........... 30

City Forecasts..................................................................... 30

Viewing Sea Conditions........................................................... 30

Surface Winds..................................................................... 30

Wave Height, Wave Period, and Wave Direction................ 30

Viewing Forecast Sea Conditions Information for Another

Time Period......................................................................... 30

Viewing Fishing Information..................................................... 30

Surface Pressure and Water Temperature Data................. 30

Forecasting Fish Locations................................................. 30

Changing the Sea Surface Temperature Color Range....... 31

Visibility Information................................................................. 31

Viewing Forecast Visibility Information for Another Time

.................................................................................. 31

Period

Viewing Buoy Reports.............................................................. 31

Viewing Local Weather Information near a Buoy................ 31

Creating a Waypoint on a Weather Chart................................ 31

Weather Overlay...................................................................... 31

Turning On the Weather Overlay on a Chart...................... 31

Weather Overlay Settings on the Navigation Chart............ 31

Weather Overlay Settings on the Fishing Chart.................. 31

Viewing Weather Subscription Information.............................. 31

Viewing Video...............................................................31

Selecting a Video Source......................................................... 31

Alternating Among Multiple Video Sources......................... 32

Associating the Camera to a Video Source........................ 32

Configuring the Video Appearance.......................................... 32

Configuring the PC Display...................................................... 32

Exiting PC Display Mode..................................................... 32

Controlling the Camera............................................................ 32

Camera Settings................................................................. 32

Video Settings..................................................................... 32

Device Configuration................................................... 32

Turning On the Chartplotter Automatically............................... 32

System Settings....................................................................... 32

Station Settings................................................................... 33

Viewing System Software Information................................ 33

Viewing the Event Log........................................................ 33

Preferences Settings................................................................ 33

Units Settings...................................................................... 33

Navigation Settings............................................................. 33

Auto Guidance Line Configurations................................ 33

Communications Settings........................................................ 34

Table of Contents iii

NMEA 0183 Settings........................................................... 34

Configuring NMEA 0183 Output Sentences................... 34

Setting the Communication Format for Each NMEA 0183

Port................................................................................. 34

NMEA 2000 Settings........................................................... 34

Garmin Marine Network...................................................... 34

Setting Alarms.......................................................................... 34

Navigation Alarms............................................................... 34

System Alarms.................................................................... 34

Setting the Fuel Alarm......................................................... 35

Setting Weather Alarms...................................................... 35

My Vessel Settings.................................................................. 35

Setting the Keel Offset........................................................ 35

Setting the Water Temperature Offset................................ 35

Calibrating a Water Speed Device...................................... 35

Other Vessels Settings............................................................ 35

Restoring the Original Chartplotter Factory Settings............... 36

Chartplotter Data Management...................................36

Copying Waypoints, Routes, and Tracks to a Chartplotter...... 36

Copying Data from a Memory Card......................................... 36

Copying Waypoints, Routes, and Tracks to a Memory Card... 36 Copying Waypoints, Routes, and Tracks to or from all Chartplotters on the Network

Copying Built-In Maps to a Memory Card................................ 36

Backing Up Data to a Computer.............................................. 36

Restoring Backup Data to a Chartplotter................................. 36

Saving System Information to a Memory Card........................ 36

................................................... 36

Appendix.......................................................................36

Registering Your Device.......................................................... 36

Digital Switching....................................................................... 37

Rotating the GRID Joystick...................................................... 37

Cleaning the Screen................................................................ 37

Screenshots............................................................................. 37

Capturing Screenshots........................................................ 37

Copying Screenshots to a Computer.................................. 37

Troubleshooting....................................................................... 37

My device will not acquire GPS signals.............................. 37

My device will not turn on or keeps turning off.................... 37

My device is not creating waypoints in the correct

location................................................................................ 37

NMEA 0183 Information........................................................... 37

NMEA 2000 PGN Information.................................................. 38

Software License Agreement................................................... 38

Index..............................................................................39

iv Table of Contents

Introduction

WARNING

See the Important Safety and Product Information guide in the product box for product warnings and other important information.

GPSMAP 8000 Series Front View

The location of items varies based upon the model. This image and table are representations of the GPSMAP 8000 series devices.

Power key

Automatic backlight sensor

Touchscreen

• Select Menu from any main screen to access additional

settings about that screen.

• Press to adjust the backlight and lock the touchscreen.

• Hold to turn the chartplotter on or off.

Inserting a Memory Card

You can use optional memory cards in the chartplotter. Map cards allow you to view high-resolution satellite imagery and aerial reference photos of ports, harbors, marinas, and other points of interest. You can use blank memory cards to transfer data such as waypoints, routes, and tracks to another compatible chartplotter or a computer.

Open the door À on the memory card reader.

Insert the memory card Á with the label facing away from the

door. Press the card in until it clicks.

Close the card reader door.

Using the Touchscreen

• Tap the screen to select an item.

• Drag or swipe your finger across the screen to pan or scroll.

• Pinch two fingers together to zoom out.

• Spread two fingers apart to zoom in.

Locking the Touchscreen

You can lock the touchscreen to prevent inadvertent screen touches.

Select .

Select Lock Touchscreen.

Downloading the Manuals

You can get the latest owner's manual and translations of manuals from the web.

Go to www.garmin.com/support.

Select Manuals.

Follow the on-screen instructions to download the manual for

your product.

Getting More Information

If you have any questions about your device, you can contact Garmin® Product Support.

The website, www.garmin.com/support, offers many different troubleshooting tips to help resolve most issues and answer most questions.

• Frequently-asked questions (FAQs)

• Software updates

• Owner's and installation manuals

• Service alerts

• Video

• Contact numbers and addresses

Tips and Shortcuts

• Select Home from any screen to return to the Home screen.

Loading the New Software on a Memory Card

The device may contain a software-update memory card. If so, follow the instructions provided with the card. If a software update memory card is not included, you must copy the software update to a memory card.

Insert a memory card into the card slot on the computer.

Go to www.garmin.com/support/software/marine.html.

Select Download next to “Garmin Marine Network with SD

card.” Read and agree to the terms.

Select Download.

Select Run.

Select the drive associated with the memory card, and select

Next > Finish.

Updating the Device Software

Before you can update the software, you must obtain a software-update memory card or load the latest software onto a memory card.

Turn on the chartplotter.

After the home screen appears, insert the memory card into

the card slot. NOTE: In order for the software update instructions to

appear, the device must be fully booted before the card is inserted.

Follow the on-screen instructions.

Wait several minutes while the software update process

completes. The device returns to normal operation after the software

update process is complete. Remove the memory card.

NOTE: If the memory card is removed before the device

restarts fully, the software update is not complete.

Introduction 1

GPS Satellite Signals

When you turn on the chartplotter, the GPS receiver must collect satellite data and establish the current location. When the chartplotter acquires satellite signals, appears at the top of the Home screen. When the chartplotter loses satellite signals, disappears and a flashing question mark appears over on the chart.

For more information about GPS, go to www.garmin.com

/aboutGPS.

Selecting the GPS Source

You can select your preferred source for GPS data, if you have more than one GPS source.

Select Settings > System > GPS > Source.

Select the source for GPS data.

Stations and Home Screens

When multiple displays are installed on the Garmin Marine Network, you can group them together into a station. A station enables the displays to work together, instead of as several separate displays.

When you select Home on one display, each display in the station returns to the Home screen.

There are two types of home screens. You can move between the two home screens by selecting the arrows. One home screen contains menu items for this display only. The other home screen contains SmartMode™ menu items, which are geared toward an activity, such as cruising or docking.

With the SmartMode feature, when a button is selected from the Home screen, each display in the station can show unique information. For example, when Cruising is selected from the Home screen, one display can show the Navigation chart and another display can show the Radar screen.

You can customize the layout of the pages on each display, making each page different on each display. When you change the layout of a page in one display, the changes appear only on that display. When you change the name and symbol of the layout, those changes appear on all displays in the station, to maintain a consistent appearance.

Customizing the Home Screen

You can add items to and remove items from the Home screen. Any customization made to one Home screen in the station appears on all displays in the station.

From the Home screen, select Menu.

Select an option:

• To add an item to the Home screen, select Add Layout,

and select the item to add.

• To remove an item, select Delete Layout, and select the

item to remove.

Resetting the Station Layouts

You can restore the factory default layouts for all stations.

Select Settings > System > Station Information > Reset

Stations.

Using the Garmin Helm™ Application with the Chartplotter

Before you can control the chartplotter with the Garmin Helm application, you must download and install the application, and connect the chartplotter to a Wi‑Fi® router.

Select Settings > Communications > Wireless Devices >

Helm App.

Select an option.

Use the application to view or control the chartplotter.

Setting the Vessel Type

You can select your boat type to configure the chartplotter settings and to use features customized for your boat type.

Select Settings > My Vessel > Vessel Type.

Select Powerboat or Sailboat.

Customizing the Layout of a Page

You change the layout of a page in the display you are interacting with, the changes appear only on that display, except for the name and symbol. If you change the name or symbol for the layout, that change appears on all displays in the station.

Open the page to customize.

Select Menu.

Select Edit Layout or Edit Combo.

Select an option:

• To change the name, select Name & Symbol > Name, enter a new name, and select Done.

• To change the symbol, select Name & Symbol > Symbol, and select a new symbol.

• To change the number of functions shown, select Functions, and select a number.

• To change the vertical or horizontal orientation of a multifunction display, select Split, and select an option.

• To change how data appears on the page, select Overlays, and select an option.

• To change the type of data shown on the page, select Overlays > Data, select an option, and follow the onscreen instructions to change the data shown.

Adjusting the Backlight

Select Settings > System > Beeper and Display >

Backlight. TIP: Press from any screen to open the backlight settings.

Select an option:

• Adjust the backlight level.

• Select Auto.

Adjusting the Color Mode

Select Settings > System > Beeper and Display > Color

Mode. TIP: Press from any screen to access the color settings.

Select an option.

Charts and 3D Chart Views

The charts and 3D chart views that are available depend on the map data and accessories used.

You can access the charts and 3D chart views by selecting

Charts. Navigation Chart: Shows navigation data available on your

pre-loaded maps and from supplemental maps, if available. The data includes buoys, lights, cables, depth soundings, marinas, and tide stations in an overhead view.

Perspective 3D: Provides a view from above and behind the

boat (according to your course) and provides a visual navigation aid. This view is helpful when navigating tricky shoals, reefs, bridges, or channels, and is beneficial when trying to identify entry and exit routes in unfamiliar harbors or anchorages.

Mariner’s Eye 3D: Shows a detailed, three-dimensional view

from above and behind the boat (according to your course) and provides a visual navigation aid. This view is helpful when navigating tricky shoals, reefs, bridges, or channels,

2 Charts and 3D Chart Views

and when trying to identify entry and exit routes in unfamiliar harbors or anchorages.

NOTE: Mariner's Eye 3D and Fish Eye 3D chart views are available with premium charts, in some areas.

Fish Eye 3D: Provides an underwater view that visually

represents the sea floor according to the chart information. When a sonar transducer is connected, suspended targets (such as fish) are indicated by red, green, and yellow spheres. Red indicates the largest targets and green indicates the smallest.

Fishing Chart: Provides a detailed view of the bottom contours

and depth soundings on the chart. This chart removes navigational data from the chart, provides detailed bathymetric data, and enhances bottom contours for depth recognition. This chart is best for offshore deep-sea fishing.

NOTE: The offshore Fishing chart is available with premium charts, in some areas.

Radar Overlay: Superimposes radar information on the

Navigation chart or the Fishing chart, when the chartplotter is connected to a radar. This feature is not available with all models.

Navigation Chart and Offshore Fishing Chart

NOTE: The offshore Fishing chart is available with premium

charts, in some areas. The Navigation and Fishing charts allow you to plan your

course, view map information, and follow a route. The Fishing chart is for offshore fishing.

To open the Navigation chart, select Charts > Nav Chart.

To open the Fishing chart, select Charts > Fishing Chart.

Zooming In and Out Using the Touchscreen

You can quickly zoom in and out of many screens, such as the charts and sonar views.

• Pinch two fingers together to zoom out.

• Spread two fingers apart to zoom in.

Measuring a Distance on the Chart

From a chart or the Radar overlay, select a location.

Select Measure Distance.

A push pin appears on the screen at your present location. The distance and angle from the pin is listed in the upper-left corner.

TIP: To reset the pin and measure from the current location of the cursor, select Set Reference.

Chart Symbols

This table contains some of the common symbols you might see on the detailed charts.

Icon Description

Buoy

Information

Marine services

Tide station

Current station

Icon Description

Overhead photo available

Perspective photo available

Other features common to most charts include depth contour lines, intertidal zones, spot soundings (as depicted on the original paper chart), navigational aids and symbols, obstructions, and cable areas.

Showing a Different Chart

From a chart or 3D chart view, select Menu > Chart Menu >

Change Chart.

Select a chart or 3D chart view.

Viewing Location and Object Information on a Chart

You can view information about a location or an object on the Navigation chart or the Fishing chart.

NOTE: The offshore Fishing chart is available with premium charts, in some areas.

From the Navigation chart or Fishing chart, select a location

or object. A list of options appears along the right side of the chart. The

options that appear vary based on the location or object you selected.

Select an option:

• To view details of objects in the vicinity of the cursor, select Review.

NOTE: Review does not appear if the cursor is not near an object. If the cursor is near only one object, the name of the object appears.

• To navigate to the selected location, select Navigate To.

• To mark a waypoint at the cursor location, select Create Waypoint.

• To view the distance and bearing of the object from your current location, select Measure Distance.

The distance and bearing appear on the screen. Select Set Reference to measure from a location other than your current location.

• To view tide, current, celestial, chart notes, or local services information near the cursor, select Information.

Viewing Details about Navaids

From the Navigation chart, Fishing chart, Perspective 3D chart view, or Mariner’s Eye 3D chart view, you can view details about various types of navigation aids, including beacons, lights, and obstructions.

NOTE: The offshore Fishing chart is available with premium charts, in some areas.

NOTE: Mariner's Eye 3D and Fish Eye 3D chart views are available with premium charts, in some areas.

From a chart or 3D chart view, select a navaid.

If necessary, select Review.

Select the name of the navaid.

Navigating to a Point on the Chart

CAUTION

The Auto Guidance feature is based on electronic chart information. That data does not ensure obstacle and bottom clearance. Carefully compare the course to all visual sightings, and avoid any land, shallow water, or other obstacles that may be in your path.

When using Go To, a direct course and a corrected course may pass over land or shallow water. Use visual sightings, and steer to avoid land, shallow water, and other dangerous objects.

Charts and 3D Chart Views 3

NOTE: The offshore Fishing chart is available with premium charts, in some areas.

NOTE: Auto Guidance is available with premium charts, in some areas.

From the Navigation chart or Fishing chart, select a location.

If necessary, select Select.

Select Navigate To.

Select an option:

• To navigate directly to the location, select Go To.

• To create a route to the location, including turns, select

Route To.

• To use Auto Guidance, select Guide To. Review the course indicated by the magenta line.

NOTE: When using Auto Guidance, a gray segment within

any part of the magenta line indicates that Auto Guidance cannot calculate part of the Auto Guidance line. This is due to the settings for minimum safe water depth and minimum safe obstacle height.

Follow the magenta line, steering to avoid land, shallow

water, and other obstacles.

Premium Charts

CAUTION

NOTE: Not all models support all charts. Optional premium charts, such as BlueChart® g2 Vision®, allow

you to get the most out of your chartplotter. In addition to detailed marine charting, premium charts may contain these features, which are available in some areas.

Mariner’s Eye 3D: Provides a view from above and behind the

boat for a three-dimensional navigation aid.

Fish Eye 3D: Provides an underwater, three-dimensional view

that visually represents the sea floor according to the information on the chart.

Fishing Charts: Shows the chart with enhanced bottom

contours and without navigational data. This chart works well for offshore deep-sea fishing.

High Resolution Satellite Imagery: Provides high-resolution

satellite images for a realistic view of the land and water on the Navigation chart (Showing Satellite Imagery on the

Navigation Chart).

Aerial Photos: Shows marinas and other navigationally

significant aerial photos to help you visualize your surroundings (Viewing Aerial Photos of Landmarks).

Detailed Roads and POI data: Shows detailed road and point

of interest (POI) data, which includes highly detailed coastal roads and POIs such as restaurants, lodging, and local attractions.

Auto Guidance: Uses specified safe depth, safe height, and

chart data to determine the best course to your destination. Auto Guidance is available when you navigate to a destination using Guide To.

Viewing Tide Station Information

on the chart indicates a tide station. You can view a detailed graph for a tide station to help predict the tide level at different times or on different days.

NOTE: This feature is available with premium charts, in some areas.

From the Navigation chart or Fishing chart, select a tide

station. Tide direction and tide level information appear near . Select an option to view additional station information:

• Select the station name.

• If more than one item is in the vicinity, select Review, and

select the station name.

Animated Tide and Current Indicators

NOTE: This feature is available with premium charts, in some areas.

You can view indicators for animated tide station and current direction on the Navigation chart or the Fishing chart. You must also enable animated icons in the chart settings (Showing and

Configuring Tides and Currents).

An indicator for a tide station appears on the chart as a vertical bar graph with an arrow. A red arrow pointing downward indicates a falling tide, and a blue arrow pointing upward indicates a rising tide. When you move the cursor over the tide station indicator, the height of the tide at the station appears above the station indicator.

Current direction indicators appear as arrows on the chart. The direction of each arrow indicates the direction of the current at a specific location on the chart. The color of the current arrow indicates the range of speed for the current at that location. When you move the cursor over the current direction indicator, the specific current speed at the location appears above the direction indicator.

Color Current Speed Range

Yellow 0 to 1 knot

Orange 1 to 2 knots

Red 2 or more knots

Showing and Configuring Tides and Currents

NOTE: This feature is available with premium charts, in some areas.

You can show static or animated tide and current station indicators on the Navigation chart or Fishing chart.

From the Navigation or Fishing chart, select Menu > Chart

Menu > Chart Setup > Tides & Currents.

Select an option:

• To show current station indicators and tide station

indicators on the chart, select On.

• To show animated tide station indicators and animated

current direction indicators on the chart, select Animated.

Showing Satellite Imagery on the Navigation Chart

NOTE: This feature is available with premium charts, in some

areas. You can overlay high-resolution satellite images on the land or

on both land and sea portions of the Navigation chart. NOTE: When enabled, high-resolution satellite images are

present only at lower zoom levels. If you cannot see highresolution images in your optional chart region, you can select

to zoom in. You also can set the detail level higher by

changing the map zoom detail.

From the Navigation chart, select Menu > Chart Menu >

Chart Setup > Satellite Photos.

Select an option:

• Select Land Only to show standard chart information on

the water, with photos overlaying the land.

• Select Photo Map to show photos on both the water and

the land at a specified opacity. Use the slider bar to adjust the photo opacity. The higher you set the percentage, the more the satellite photos cover both land and water.

4 Charts and 3D Chart Views

Viewing Aerial Photos of Landmarks

Before you can view aerial photos on the Navigation chart, you must turn on the Photo setting in the chart setup.

NOTE: This feature is available with premium charts, in some areas.

You can use aerial photographs of landmarks, marinas, and harbors to help orient yourself to your surroundings or to acquaint yourself with a marina or a harbor prior to arrival.

From the Navigation chart, select a camera icon:

• To view an overhead photo, select .

• To view a perspective photo, select . The photo was taken from the location of the camera, pointed in the direction of the cone.

Select Review > Aerial Photo.

Automatic Identification System

The Automatic Identification System (AIS) enables you to identify and track other vessels, and alerts you to area traffic. When connected to an external AIS device, the chartplotter can show some AIS information about other vessels that are within range, that are equipped with a transponder, and that are actively transmitting AIS information.

The information reported for each vessel includes the Maritime Mobile Service Identity (MMSI), location, GPS speed, GPS heading, time that has elapsed since the last position of the vessel was reported, nearest approach, and time to the nearest approach.

Some chartplotter models also support Blue Force Tracking. Vessels being tracked with Blue Force Tracking are indicated on the chartplotter with a blue-green color.

AIS Targeting Symbols

Symbol Description

AIS vessel. The vessel is reporting AIS information. The direction in which the triangle is pointing indicates the direction in which the AIS vessel is moving.

Target is selected.

Target is activated. The target appears larger on the chart. A green line attached to the target indicates the heading of the target. The MMSI, speed, and direction of the vessel appear beneath the target, if the details setting has been set to Show. If the AIS transmission from the vessel is lost, a message banner appears.

Target is lost. A green X indicates that the AIS transmission from the vessel is lost, and the chartplotter displays a message banner asking whether the vessel should continue to be tracked. If you discontinue vessel tracking, the lost target symbol disappears from the chart or the 3D chart view.

Dangerous target in range. The target flashes while an alarm sounds and a message banner appears. After the alarm has been acknowledged, a solid red triangle with a red line attached to it indicates the location and the heading of the target. If the safe-zone collision alarm has been set to Off, the target flashes, but the audible alarm does not sound and the alarm banner does not appear. If the AIS transmission from the vessel is lost, a message banner appears.

Dangerous target is lost. A red X indicates that the AIS transmission from the vessel is lost, and the chartplotter displays a message banner asking whether the vessel should continue to be tracked. If you discontinue vessel tracking, the lost dangerous target symbol disappears from the chart or the 3D chart view.

The location of this symbol indicates the closest point of approach to a dangerous target, and the numbers near the symbol indicate the time to the closest point of approach to that target.

NOTE: Vessels being tracked with the Blue Force Tracking feature are indicated with a blue-green color regardless of their status.

Heading and Projected Course of Activated AIS Targets

When heading and course over ground information are provided by an activated AIS target, the heading of the target appears on a chart as a solid line attached to the AIS target symbol. A heading line does not appear on a 3D chart view.

The projected course of an activated AIS target appears as a dashed line on a chart or a 3D chart view. The length of the projected course line is based on the value of the projected heading setting. If an activated AIS target is not transmitting speed information, or if the vessel is not moving, a projected course line does not appear. Changes in the speed, course over ground, or rate of turn information transmitted by the vessel can impact the calculation of the projected course line.

When course over ground, heading, and rate of turn information are provided by an activated AIS target, the projected course of the target is calculated based on the course over ground and the rate of turn information. The direction in which the target is turning, which is also based on the rate of turn information, is indicated by the direction of the barb at the end of the heading line. The length of the barb does not change.

When course over ground and heading information are provided by an activated AIS target, but rate of turn information is not provided, the projected course of the target is calculated based on the course over ground information.

Showing AIS and MARPA Vessels on a Chart or on a 3D Chart View

Before you can show AIS vessels on a chart, you must have an external AIS device and active transponder signals from other vessels. Mini Automatic Radar Plotting Aid (MARPA) functionality works with radar.

You can configure how other vessels appear on a chart or on a 3D chart view. The display range and MARPA settings configured for one chart or one 3D chart view are applied only to that chart or to that 3D chart view. The details, projected heading, and trails settings configured for one chart or one 3D chart view are applied to all charts and to all 3D chart views.

From a chart or a 3D chart view, select Menu > Chart Menu

> Other Vessels > Display Setup. Select an option:

• To indicate the distance from your location in which AIS

vessels appear, select Display Range, and select a distance.

• To show MARPA-tagged vessels, select MARPA > Show.

• To show details about AIS-activated and MARPA-tagged vessels, select Details > Show.

• To set the projected heading time for AIS-activated and MARPA-tagged vessels, select Proj. Heading, and enter the time.

• To show the tracks of AIS vessels, select the length of the track that appears using a trail, select Trails, and select the length.

Activating a Target for an AIS Vessel

From a chart or a 3D chart view, select an AIS vessel.

Select AIS Vessel > Activate Target.

Viewing Information about a Targeted AIS Vessel

You can view the AIS signal status, MMSI, GPS speed, GPS heading, and other information that is reported about a targeted AIS vessel.

From a chart or a 3D chart view, select an AIS vessel.

Charts and 3D Chart Views 5

Select AIS Vessel.

Deactivating a Target for an AIS Vessel

From a chart or a 3D chart view, select an AIS vessel.

Select AIS Vessel > Deactivate.

Viewing a List of AIS and MARPA Threats

From a chart or a 3D chart view, select Menu > Other

Vessels > AIS & MARPA List > Show.

Select the type of threats to include in the list.

Setting the Safe-Zone Collision Alarm

Before you can set a collision alarm, you must have a compatible chartplotter connected to an AIS device or radar.

The safe-zone collision alarm is used only with AIS and MARPA. MARPA functionality works with radar. The safe zone is used for collision avoidance and can be customized.

Select Settings > Alarms > AIS > Collision Alarm > On.

A message banner appears and an alarm sounds when a MARPA-tagged object or an AIS-activated vessel enters the safe-zone area around your boat. The object is also labeled as dangerous on the screen. When the alarm is off, the message banner and audible alarm are disabled, but the object is still labeled as dangerous on the screen.

Select Range.

Select a distance for the safe-zone radius around your

vessel. Select Time To.

Select a time at which the alarm will sound if a target is

determined to intersect the safe zone. For example, to be notified of a pending intersection 10

minutes before it will likely occur, set Time To to 10, and the alarm will sound 10 minutes before the vessel intersects the safe zone.

AIS Distress Signals

Self-contained AIS distress signal devices transmit emergency position reports when activated. The chartplotter can receive signals from Search and Rescue Transmitters (SART), Emergency Position Indicating Radio Beacons (EPIRB), and other man overboard signals. Distress signal transmissions are different than standard AIS transmissions, so they appear differently on the chartplotter. Instead of tracking a distress signal transmission for collision avoidance, you track a distress signal transmission to locate and assist a vessel or person.

Navigating to a Distress Signal Transmission

When you receive a distress signal transmission, a distress signal alarm appears.

Select Review > Go To to begin navigation to the transmission.

AIS Distress Signal Device Targeting Symbols

Symbol Description

AIS distress signal device transmission. Select to see more information about the transmission and begin navigation.

Transmission lost.

Transmission test. Appears when a vessel initiates a test of their distress signal device, and does not represent a true emergency.

Transmission test lost.

Enabling AIS Transmission Test Alerts

To avoid a large number of test alerts and symbols in crowded areas such as marinas, you can select to receive or ignore AIS test messages. To test an AIS emergency device, you must enable the chartplotter to receive test alerts.

Select Settings > Alarms > AIS.

Select an option:

• To receive or ignore Emergency Position Indicating Radio Beacon (EPRIB) test signals, select AIS-EPIRB Test.

• To receive or ignore Man Overboard (MOB) test signals, select AIS-MOB Test.

• To receive or ignore Search and Rescue Transponder (SART) test signals, select AIS-SART Test.

Turning Off AIS Reception

AIS signal reception is turned on by default.

Select Settings > Other Vessels > AIS > Off. All AIS functionality on all charts and 3D chart views is

disabled. This includes AIS vessel targeting and tracking, collision alarms that result from AIS vessel targeting and tracking, and the display of information about AIS vessels.

Chart and 3D Chart View Settings

NOTE: Not all settings apply to all charts and 3D chart views.

Some options require premium maps or connected accessories, such as radar.

These settings apply to the charts and 3D chart views, except the radar overlay and Fish Eye 3D (Fish Eye 3D Settings).

From a chart or a 3D chart view, select Menu > Chart Menu. Waypoints & Tracks: See Waypoints and Tracks Settings on

the Charts and Chart Views.

Other Vessels: See Other Vessels Settings on the Charts and

Chart Views.

Surface Radar: Shows surface radar details on the Perspective

3D or Mariner's Eye 3D chart views.

Weather Radar: Shows weather radar imaging on the

Perspective 3D or Mariner's Eye 3D chart views.

Navaids: Shows navigational aids on the Fishing chart. Laylines: Adjusts the laylines, when in sailing mode (Laylines

Settings).

Chart Setup: See Navigation and Fishing Chart Setup. Chart Appearance: See Chart Appearance Settings. This might

appear in the Chart Setup menu.

Navigation and Fishing Chart Setup

NOTE: Not all settings apply to all charts and 3D chart views.

Some settings require external accessories or applicable premium charts.

From the Navigation chart or Fishing chart, select Menu >

Chart Menu > Chart Setup. Satellite Photos: Shows high-resolution satellite images on the

land or on both land and sea portions of the Navigation chart, when certain premium maps are used (Showing Satellite

Imagery on the Navigation Chart).

Water Overlay: Enables relief shading, which shows the

gradient of the bottom with shading, or sonar imagery, which helps identify the density of the of the bottom. This feature is available only with some premium maps.

Tides & Currents: Shows current station indicators and tide

station indicators on the chart (Showing and Configuring

Tides and Currents) and enables the tides and current slider,

which sets the time for which tides and currents are reported on the map.

Roses: Shows a compass rose around your boat, indicating

compass direction oriented to the heading of the boat. A true wind direction or apparent wind direction indicator appears if the chartplotter is connected to a compatible marine wind sensor. When in sailing mode, true and apparent wind are shown on the wind rose.

Lake Level: Sets the present water level of the lake. This

feature is available only with some premium maps.

6 Charts and 3D Chart Views

Inset Map: Shows a small map centered on your present

location.

Weather: Sets which weather items are shown on the chart,

when the chartplotter is connected to a compatible weather receiver with an active subscription. Requires a compatible, connected antenna and an active subscription.

Chart Appearance: See Chart Appearance Settings.

Waypoints and Tracks Settings on the Charts and Chart Views

From a chart or a 3D chart view, select Menu > Chart Menu > Waypoints & Tracks.

Tracks: Shows tracks on the chart or 3D chart view. Waypoints: Shows the list of waypoints (Viewing a List of all

Waypoints).

Create Waypoint: Creates a new waypoint. Waypoint Display: Sets how to display waypoints on the chart. Active Tracks: Shows the active track options menu. Saved Tracks: Shows the list of saved tracks (Viewing a List of

Saved Tracks).

Tracks Display: Sets which tracks to display on the chart

based on track color.

Chart Appearance Settings

You can adjust the appearance of the different chart views. Each setting is specific for the type of chart view that you are in.

NOTE: Not all settings apply to all charts and 3D chart views and chartplotter models. Some options require premium maps or connected accessories, such as radar.

From a chart or 3D chart view, select Menu > Chart Menu >

Chart Setup > Chart Appearance. Orientation: Sets the perspective of the map. Detail: Adjusts the amount of detail shown on the map, at

different zoom levels.

Heading Line: Shows and adjusts the heading line, which is a

line drawn on the map from the bow of the boat in the direction of travel, and sets the data source for the heading line.

World Map: Uses either a basic world map or a shaded relief

map on the chart. These differences are visible only when zoomed out too far to see the detailed charts.

Spot Depths: Turns on spot soundings and sets a dangerous

depth. Spot depths that are equal to or more shallow than the dangerous depth are indicated by red text.

Safety Shading: Sets the shades from the shoreline to the

specified depth.

Depth Range Shading: Specifies an upper and lower depth to

shade between.

Symbols: Shows and configures the appearance of various

symbols on the chart, such as the vessel icon, navaid symbols, land POIs, and light sectors.

Style: Sets how the chart appears over 3D terrain. Hazard Colors: Shows shallow water and land with a color

scale. Blue indicates deep water, yellow is shallow water, and red is very shallow water.

Safe Depth: Sets the appearance of a safe depth for Mariner’s

Eye 3D. NOTE: This setting affects only the appearance of hazard

colors in Mariner’s Eye 3D. It does not affect the safe water depth Auto Guidance setting or the sonar shallow water alarm setting.

Range Rings: Shows and configures the appearance of range

rings, which help you to visualize distances in some chart views.

Lane Width: Specifies the width of the navigation lane, which is

the magenta line in some chart views that indicates the course to your destination.

Other Vessels Settings on the Charts and Chart Views

NOTE: These options require connected accessories, such as

an AIS receiver or VHF radio. From a chart or a 3D chart view, select Menu > Chart Menu >

Other Vessels. AIS & MARPA List: Shows a list of AIS and MARPA vessels. DSC: Shows the DSC list and sets the DSC trails on the chart. Collision Alarm: Sets the safe-zone collision alarm (Setting the

Safe-Zone Collision Alarm).

Display Setup: See Showing AIS and MARPA Vessels on a

Chart or on a 3D Chart View.

Laylines Settings

When in sailing mode (Setting the Vessel Type), you can display laylines on the navigation chart. Laylines can be very helpful when racing.

From the navigation chart, select Menu > Chart Menu >

Laylines. Display: Sets how the laylines and vessel are shown on the

chart, and sets the length of the laylines.

Sailing Ang.: Allows you to select how the device calculates

laylines. The Actual option calculates the laylines using the measured wind angle from the wind sensor. The Manual option calculates the laylines using manually entered windward and leeward angles.

Tide Correction: Corrects the laylines based on the tide.

Fish Eye 3D Settings

NOTE: This feature is available with premium charts, in some

areas. From the Fish Eye 3D chart view, select Menu > Chart Menu.

View: Sets the perspective of the 3D chart view. Tracks: Shows tracks. Sonar Cone: Shows a cone that indicates the area covered by

the transducer.

Fish Symbols: Shows suspended targets.

Waypoints, Routes, and Tracks

Waypoints

Waypoints are locations you record and store in the device.

Marking Your Present Location as a Waypoint

From any screen, select Mark.

Creating a Waypoint at a Different Location

Select Info > User Data > Waypoints > Create Waypoint.

Select an option:

• To create the waypoint by entering position coordinates, select Enter Coordinates, and enter the coordinates.

• To create the waypoint using a chart, select Use Chart, select the location, and select Select.

Marking an SOS Location

You can mark an SOS location. When a Garmin VHF radio is connected using NMEA 2000®, you can select different SOS types, such as Man Overboard and Piracy.

From the Home screen, select SOS.

Select the SOS type.

Waypoints, Routes, and Tracks 7

If necessary, select OK to navigate to the man overboard

location.

If you selected OK, the chartplotter sets a direct course back to the location. If you selected another type of SOS, the call details are sent to the VHF radio. You must send the call using the radio.

Viewing a List of all Waypoints

Select Info > User Data > Waypoints.

Editing a Saved Waypoint

Select Info > User Data > Waypoints.

Select a waypoint.

Select Review > Edit.

Select an option:

• To add a name, select Name, and enter a name.

• To change the symbol, select Symbol.

• To change the depth, select Depth.

• To change the water temperature, select Water Temp..

• To change the comment, select Comment.

Moving a Saved Waypoint

Select Info > User Data > Waypoints.

Select a waypoint.

Select Review > Move.

Indicate a new location for the waypoint:

• To move the waypoint while using the chart, select Use Chart, select a new location on the chart, and select Move Waypoint.

• To move the waypoint using coordinates, select Enter Coordinates, and enter the new coordinates.

Browsing for and Navigating to a Saved Waypoint

CAUTION

When using Go To, a direct course and a corrected course may pass over land or shallow water. Use visual sightings, and steer to avoid land, shallow water, and other dangerous objects.

NOTE: Auto Guidance is available with premium charts, in some areas.

Before you can navigate to a waypoint, you must create a waypoint.

Select Info > User Data > Waypoints.

Select a waypoint.

Select Navigate To.

Select an option:

• To navigate directly to the location, select Go To.

• To create a route to the location, including turns, select Route To.

• To use Auto Guidance, select Guide To.

Review the course indicated by the magenta line.

NOTE: When using Auto Guidance, a gray segment within

any part of the magenta line indicates that Auto Guidance cannot calculate part of the Auto Guidance line. This is due to the settings for minimum safe water depth and minimum safe obstacle height.

Follow the magenta line, steering to avoid land, shallow

water, and other obstacles.

Deleting a Waypoint or an MOB

Select Info > User Data > Waypoints.

Select a waypoint or an MOB.

Select Review > Delete.

Deleting All Waypoints

Select Info > User Data > Clear User Data > Waypoints > All.

Routes

Creating and Navigating a Route From Your Present Location

You can create and immediately navigate a route on the Navigation chart or the Fishing chart. This procedure does not save the route or the waypoint data.

NOTE: The offshore Fishing chart is available with premium charts, in some areas.

From the Navigation chart or Fishing chart, select a

destination. Select Navigate To > Route To.

Select the location of the last turn before the destination.

Select Add Turn.

If necessary, repeat step 3 and 4 to add additional turns,

working backward from the destination to the present location of your vessel.

The last turn you add should be the first turn you make, starting from your present location. It should be the turn closest to your vessel.

If necessary, select Menu.

Select Navigate Route.

Review the course indicated by the magenta line.

Follow the magenta line, steering to avoid land, shallow

water, and other obstacles.

Creating and Saving a Route

This procedure saves the route and all the waypoints in it. The starting point can be your present location or another location.

Select Info > User Data > Routes > New Route > Use

Chart.

Select the starting location of the route.

Select Add Turn.

Select the location of the next turn on the chart.

Select Add Turn.

The chartplotter marks the location of the turn with a waypoint.

If necessary, repeat steps 4 and 5 to add more turns.

Select the final destination.

Viewing a List of Routes

Select Info > User Data > Routes.

Editing a Saved Route

You can change the name of a route or change the turns the route contains.

Select Info > User Data > Routes.

Select a route.

Select Review > Edit Route.

Select an option:

• To change the name, select Name, and enter the name.

• To select a waypoint from the turn list, select Edit Turns > Use Turn List, and select a waypoint from the list.

8 Waypoints, Routes, and Tracks

• To select a turn using the chart, select Edit Turns > Use

Chart, and select a location on the chart.

Browsing for and Navigating a Saved Route

Before you can browse a list of routes and navigate to one of them, you must create and save at least one route.

Select Info > User Data > Routes.

Select a route.

Select Navigate To.

Select an option:

• To navigate the route from the starting point used when

the route was created, select Forward.

• To navigate the route from the destination point used

when the route was created, select Backward.

A magenta line appears. In the center of the magenta line is a thinner purple line that represents the corrected course from your present location to the destination. The corrected course is dynamic, and it moves with your boat when you are off course.

Review the course indicated by the magenta line.

Follow the magenta line along each leg in the route, steering

to avoid land, shallow water, and other obstacles. If you are off course, follow the purple line (corrected course)

to go to your destination, or steer back to the magenta line (direct course).

Browsing for and Navigating Parallel to a Saved Route

Before you can browse a list of routes and navigate to one of them, you must create and save at least one route.

Select Info > User Data > Routes.

Select a route.

Select Navigate To.

Select Offset to navigate parallel to the route, offset from it

by a specific distance. Indicate how to navigate the route:

• To navigate the route from the starting point used when the route was created, to the left of the original route, select Forward – Port.

• To navigate the route from the starting point used when the route was created, to the right of the original route, select Forward – Starboard.

• To navigate the route from the destination point used when the route was created, to the left of the original route, select Backward – Port.

• To navigate the route from the destination point used when the route was created, to the right of the original route, select Backward – Starboard.

If necessary, select Done.

Review the course indicated by the magenta line.

Follow the magenta line along each leg in the route, steering

to avoid land, shallow water, and other obstacles. If you are off course, follow the purple line (corrected course)

to go to your destination, or steer back to the magenta line (direct course).

Deleting a Saved Route

Select Info > User Data > Routes.

Select a route.

Select Review > Delete.

Deleting All Saved Routes

Select Info > User Data > Clear User Data > Routes.

Tracks

A track is a recording of the path of your boat. The track currently being recorded is called the active track, and it can be saved. You can show tracks in each chart or 3D chart view.

Showing Tracks

From a chart or a 3D chart view, select Menu > Chart Menu > Waypoints & Tracks > Tracks > On.

A trailing line on the chart indicates your track.

Setting the Color of the Active Track

Select Info > User Data > Tracks > Active Track Options >

Track Color.

Select a track color.

Saving the Active Track

The track currently being recorded is called the active track.

Select Info > User Data > Tracks > Save Active Track.

Select an option:

• Select the time the active track began.

• Select Entire Log. Select Save.

Viewing a List of Saved Tracks

Select Info > User Data > Tracks > Saved Tracks.

Editing a Saved Track

Select Info > User Data > Tracks > Saved Tracks.

Select a track.

Select Edit Track.

Select an option:

• Select Name, and enter the new name.

• Select Track Color, and select a color.

Saving a Track as a Route

Select Info > User Data > Tracks > Saved Tracks.

Select a track.

Select Select > Edit Track > Save Route.

Browsing for and Navigating a Recorded Track

Before you can browse a list of tracks and navigate to them, you must record and save at least one track (Tracks).

Select Info > User Data > Tracks > Saved Tracks.

Select a track.

Select Follow Track.

Select an option:

• To navigate the track from the starting point used when

the track was created, select Forward.

• To navigate the track from the destination point used

when the track was created, select Backward.

Review the course indicated by the colored line.

Follow the line along each leg in the route, steering to avoid

land, shallow water, and other obstacles.

Deleting a Saved Track

Select Info > User Data > Tracks > Saved Tracks.

Select a track.

Select Select > Delete.

Waypoints, Routes, and Tracks 9

+ 33 hidden pages

Garmin GPSMAP 8000 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual

Table of Contents

Introduction

GPSMAP 8000 Series Front View

Inserting a Memory Card

Using the Touchscreen

Locking the Touchscreen

Downloading the Manuals

Getting More Information

Tips and Shortcuts

Loading the New Software on a Memory Card

Updating the Device Software

GPS Satellite Signals

Selecting the GPS Source

Stations and Home Screens

Customizing the Home Screen

Resetting the Station Layouts

Using the Garmin Helm™ Application with the Chartplotter

Setting the Vessel Type

Customizing the Layout of a Page

Adjusting the Backlight

Adjusting the Color Mode

Charts and 3D Chart Views

Navigation Chart and Offshore Fishing Chart

Zooming In and Out Using the Touchscreen

Measuring a Distance on the Chart

Chart Symbols

Showing a Different Chart

Viewing Location and Object Information on a Chart

Viewing Details about Navaids

Navigating to a Point on the Chart

Premium Charts

Viewing Tide Station Information

Animated Tide and Current Indicators

Showing and Configuring Tides and Currents

Showing Satellite Imagery on the Navigation Chart

Viewing Aerial Photos of Landmarks

Automatic Identification System

AIS Targeting Symbols

Heading and Projected Course of Activated AIS Targets

Showing AIS and MARPA Vessels on a Chart or on a 3D Chart View

Activating a Target for an AIS Vessel

Viewing Information about a Targeted AIS Vessel

Deactivating a Target for an AIS Vessel

Viewing a List of AIS and MARPA Threats

Setting the Safe-Zone Collision Alarm

AIS Distress Signals

Navigating to a Distress Signal Transmission

AIS Distress Signal Device Targeting Symbols

Enabling AIS Transmission Test Alerts

Turning Off AIS Reception

Chart and 3D Chart View Settings

Navigation and Fishing Chart Setup

Waypoints and Tracks Settings on the Charts and Chart Views

Chart Appearance Settings

Other Vessels Settings on the Charts and Chart Views

Laylines Settings

Fish Eye 3D Settings

Waypoints, Routes, and Tracks

Waypoints

Marking Your Present Location as a Waypoint

Creating a Waypoint at a Different Location

Marking an SOS Location

Viewing a List of all Waypoints

Editing a Saved Waypoint

Moving a Saved Waypoint

Browsing for and Navigating to a Saved Waypoint

Deleting a Waypoint or an MOB

Deleting All Waypoints

Routes

Creating and Navigating a Route From Your Present Location

Creating and Saving a Route

Viewing a List of Routes

Editing a Saved Route

Browsing for and Navigating a Saved Route

Browsing for and Navigating Parallel to a Saved Route

Deleting a Saved Route