Garmin GNC 355 Declaration of Conformity

Issued: 30/8/2019

Revised:

Application of Council Directive: 2014/53/EU
This declaration of conformity is issued under the sole responsibility of the manufacturer.

Manufactured by: &
Manufacturer's Address: 1200 E. 151st Street 2345 Turner Road SE

Olathe, Kansas 66062 Salem, OR 97302
U.S.A. USA

Authorised Representative: Garmin Würzburg GmbH,

Beethovenstraße 1 a+b

97080 Würzburg, Germany
Type of Equipment:
Model Number(s):
GNC 355(A) 2.4 GHz @ 4 dBm nominal
The undersigned does hereby declare that the equipment complies with the above Directives and Standards.

Ryan House
Quality Associate
Garmin Würzburg GmbH 30/8/2019

GNC 355, GNC 355A

EU DECLARATION OF CONFORMITY

EN 300 328 v2.1.1 2016-11 Wideband transmission systems; Data transmission equipment operating in the 2,4 GHz ISM

band and using wide band modulation techniques

EN 301 489-1 v2.1.1 2017-02 ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 1:
Common technical requirements

EN 301 489-3 v2.1.1 2017-03 ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 3:
Specific conditions for Short-Range Devices (SRD) operating on frequencies between 9 kHz and 246 GHz

EN 55032:2012 (CISPR 32) Electromagnetic compatibility of multimedia equipment – Emission requirements

EN 60950-1:2006+A11:2009+A1:2010+A12:2011+A2:2013 Information technology equipment. Safety. General

requirements

EN 62368-1:2014 Audio/Video, Information and Communications Technology Equipment – Safety requirements

EN 62479:2010 Assessment of the compliance of low power electronic and electrical equipment with the basic restrictions

related to human exposure to electromagnetic fields (10 MHz to 300 GHz)

GARMIN International

Garmin AT

Information Technology Equipment (Avionics Information Device)