Garmin ECOROUTE HD User Manual
ecoRoute HD Instructions ....................................................................2
Instructions du périphérique ecoRoute HD ........................................ 6
Garmin® and the Garmin logo are trademarks of Garmin Ltd. or its subsidiaries, registered in the USA and other countries. ecoRoute™
is a trademark of Garmin Ltd. or its subsidiaries. These trademarks may not be used without the express permission of Garmin.
© 2010 Garmin Ltd. or its subsidiaries
1200 East 151st Street, Olathe, Kansas 66062, USA
Liberty House, Hounsdown Business Park, Southampton, Hampshire, SO40 9LR UK
No. 68, Jangshu 2nd Road, Sijhih, Taipei County, Taiwan
May 2010 Part Number 190-01132-92 Rev. C Printed in Taiwan
Garmin International, Inc.
Garmin (Europe) Ltd.
Garmin Corporation
www.garmin.com
ecoRoute HD Instructions
The ecoRoute™ HD device connects to your vehicle’s
OBD II (On-Board Diagnostics) connector. The ecoRoute
HD device records vehicle data and wirelessly sends the
data to a compatible Garmin GPS device.
For complete information on using the ecoRoute HD
device with your GPS device, refer to the ecoRoute HD
Supplement found at www.garmin.com.
Updating Your GPS Device Software
Before using the ecoRoute HD device with your GPS
device, you may need to update the GPS device software.
1. Go to www.garmin.com, and click Support >
Software.
2. Follow the on-screen instructions to update the
software for your GPS device.
For specic information about updating your GPS device,
refer to the owner’s manual for your GPS device found at
www.garmin.com.
OBD II Connector Location
WARNING
If your vehicle’s OBD II connector is in close proximity to
the vehicle’s pedals, to avoid the risk of pedal interference,
do not install the ecoRoute HD device in your vehicle.
Return the product to the place of purchase within 7 days
of purchase for a refund.
The location of the OBD II connector varies for each
vehicle. For the best view of the connector, open the driver
door and kneel.
Search the Internet for images that
show where the OBD II connector
is located in your vehicle. The
following are common locations in
which to look for the OBD II connector:
The OBD II connector is often below the steering
•
column, between the center console and the driver’s
door.
The OBD II connector might be under a labeled cover.
•
Remove or open the cover to access the connector.
The OBD II connector might be under or behind the
•
ash tray or near the power outlet in the center console.
OBD II ConnectorOBD II Connector
Connecting and Mounting the
ecoRoute HD Device
When installing the device in a vehicle, install the device
securely so it does not interfere with the vehicle operating
controls, such as the foot pedals, or the driver’s feet.
Interference with the vehicle operating controls or feet can
result in an accident, which could result in injury or death.
Defer to your vehicle’s warranty provisions and owner’s
instructions for guidance on whether any OBD II
connector product might void or alter your vehicle’s
warranty. Garmin is not responsible for any costs or
expenses associated with vehicle repairs or voided
warranties.
The permanent mounting adhesive is extremely difcult
to remove after it is installed.
Before installing the ecoRoute HD device, you must
update the GPS device software and nd the OBD II
connector in your vehicle.
1. Connect the ecoRoute HD connector to the OBD II
connector in the vehicle.
ecoRoute HD
connector
2. If securing with double-sided mounting adhesive, clean
the area where you will place the adhesive.
3. Secure the ecoRoute HD device and cable to the
vehicle using the cable ties or double-sided mounting
adhesive. Secure the device away from the foot pedals
and the driver’s feet.
LED
RESET key
WARNING
CAUTION
Notice
Cable ties
Vehicle OBD II connector
ecoRoute HD
device
2
Customizing the Cable Angle
If the vehicle requires the cable to be at an angle from
the connector, you can use the cable ties to customize the
cable for the installation.
1. To better suit some installations, bend the cable around
the connector.
2. Use a cable tie to secure the cable.
About the LEDs
The two LEDs, green and blue, on the top of the ecoRoute
HD device indicate the connection status.
LED Meaning
Three ashes Establishing a connection with vehicle
Green ashing Connecting to the vehicle.
Green solid Communicating with the vehicle.
Blue ashing Connecting to the GPS device.
Blue solid Communicating with the GPS device.
Two ashes Update mode.
and GPS device. Setup mode.
Wirelessly Connecting with a Garmin
Viewing ecoRoute HD Data
GPS Device
Before wirelessly connecting with a GPS device, you must
update the GPS device software and install the ecoRoute
HD device.
1. Start the vehicle, but remain in park (stationary).
The LED blinks three times every two seconds. The
ecoRoute HD device is waiting to connect with the
GPS device.
2. Turn on the GPS device.
3. Bring the GPS device within 10 meters (33 feet) of the
ecoRoute HD device.
4. From the Tools menu, touch ecoRoute.
5. If necessary, follow the on-screen instructions to set up
ecoRoute.
6. From the ecoRoute menu, touch HD Connection.
7. Follow the on-screen instructions to connect the
ecoRoute HD device with the GPS device.
The LED turns blue when the ecoRoute HD device is
connected to your GPS device.
8. Turn the vehicle off and then back on to save the setup
information.
After the initial connection, the ecoRoute HD device will
automatically connect to the GPS device when they are
turned on and are within 10 meters (33 feet) of each other.
NOTE: When the ecoRoute HD is not connected with a
GPS device, the ecoRoute HD device records the vehicle
information and sends the data to the GPS device the next
time they connect.
If, at any time while using the ecoRoute HD device, you
become concerned about your vehicle’s operation, pull
over, off the roadway, in a safe and legal manner. Remove
the ecoRoute HD device from the OBD II connector.
On your GPS device, touch Tools > ecoRoute.
For more information about using your Garmin GPS
device with ecoRoute HD data, refer to the ecoRoute HD
Supplement at www.garmin.com.
Operating Temperature
From 5°F to 158°F (from -15°C to 70°C).
Resetting the ecoRoute Device
Reset the ecoRoute device if it stops functioning.
Press and release the RESET key to reset the device.
•
Press and hold the RESET key for 3 seconds to restore
•
the factory settings.
NOTE: When restoring the factory settings, the
wireless connection information and recorded vehicle
information is deleted.
Notice
3
FCC Compliance
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15
of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses,
and can radiate radio frequency energy and may cause
harmful interference to radio communications if not
installed and used in accordance with the instructions.
However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference
by one of the following measures:
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and the
•
receiver.
Connect the equipment into an outlet that is on a
•
different circuit from the GPS unit.
Consult the dealer or an experienced radio/TV
•
technician for help.
This product does not contain any user-serviceable parts.
Repairs should only be made by an authorized Garmin
service center. Unauthorized repairs or modications could
result in permanent damage to the equipment, and void
your warranty and your authority to operate this device
under Part 15 regulations.
Industry Canada Compliance
Category I radiocommunication devices comply with
Industry Canada Standard RSS-210. Category II
radiocommunication devices comply with Industry Canada
Standard RSS-310.
WARNING
This product, its packaging, and its components contain
chemicals known to the State of California to cause cancer,
birth defects, or reproductive harm. This notice is provided
in accordance with California’s Proposition 65. With a
GPS see www.garmin.com/prop65 for more information.
Limited Warranty
This Garmin product is warranted to be free from defects
in materials or workmanship for one year from the date
of purchase. Within this period, Garmin will, at its sole
option, repair or replace any components that fail in
normal use. Such repairs or replacement will be made at
no charge to the customer for parts or labor, provided that
the customer shall be responsible for any transportation
cost. This warranty does not apply to: (i) cosmetic damage,
such as scratches, nicks and dents; (ii) consumable parts,
such as batteries, unless product damage has occurred
due to a defect in materials or workmanship; (iii) damage
caused by accident, abuse, misuse, water, ood, re, or
other acts of nature or external causes; (iv) damage caused
by service performed by anyone who is not an authorized
service provider of Garmin; or (v) damage to a product
that has been modied or altered without the written
permission of Garmin. In addition, Garmin reserves the
right to refuse warranty claims against products or services
that are obtained and/or used in contravention of the laws
of any country.
This product is intended to be used only as a travel
aid and must not be used for any purpose requiring
precise measurement of direction, distance, location or
topography. Garmin makes no warranty as to the accuracy
or completeness of map data in this product.
THE WARRANTIES AND REMEDIES CONTAINED
HEREIN ARE EXCLUSIVE AND IN LIEU OF ALL
OTHER WARRANTIES EXPRESS, IMPLIED, OR
STATUTORY, INCLUDING ANY LIABILITY ARISING
UNDER ANY WARRANTY OF MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE,
STATUTORY OR OTHERWISE. THIS WARRANTY
GIVES YOU SPECIFIC LEGAL RIGHTS, WHICH MAY
VARY FROM STATE TO STATE.
IN NO EVENT SHALL GARMIN BE LIABLE FOR
ANY INCIDENTAL, SPECIAL, INDIRECT, OR
CONSEQUENTIAL DAMAGES (INCLUDING ANY
VEHICLE REPAIRS OR DAMAGES ALLEGEDLY
CAUSED BY OR ASSOCIATED WITH THIS
PRODUCT), WHETHER RESULTING FROM THE USE,
MISUSE, OR INABILITY TO USE THIS PRODUCT OR
FROM DEFECTS IN THE PRODUCT. SOME STATES
DO NOT ALLOW THE EXCLUSION OF INCIDENTAL
OR CONSEQUENTIAL DAMAGES, SO THE ABOVE
LIMITATIONS MAY NOT APPLY TO YOU.
4
Loading...