Garmin EB-1735W User Manual

User’s Guide

Notations Used in This Guide

f Safety indications

So that you can use the product safely and correctly, symbols are applied in the User's Guide and on the product to indicate possible harm to the user or to others and the risk of damage to property. The indications and their meaning are as follows. Make sure you understand them properly before reading the guide.

Warning

Caution

f General information indications

Attention

This symbol indicates information that, if ignored, could possibly result in death or personal injury due to incorrect handling.

This symbol indicates information that, if ignored, could possibly result in personal injury or physical damage due to incorrect handling.

Indicates procedures which may result in damage or injury if sufficient care is not taken.

Indicates additional information and points which may be useful to know regarding a topic.

Procedure

[ (Name) ]

Indicates a page where detailed information regarding a topic can be found.

Indicates that an explanation of the underlined word or words in front of this symbol appears in the glossary of terms. See the "Glossary" section of the "Appendices". s p.112

Indicates operating methods and the order of operations. The procedure indicated should be carried out in the order of the numbered steps.

Indicates the name of the buttons on the remote control or the control panel. Example: [Esc] button

"(Menu Name)"

Indicates configuration menu items. Example: "Image" - "Brightness"

Projector Features......................................................................................5

Features Common to Each Model ....................................................................... 5

EB-1735W/1725 Features.................................................................................... 6

Part Names and Functions ........................................................................7

Front/Top.............................................................................................................. 7

Rear ..................................................................................................................... 8

Base ................................................................................................................... 10

Control Panel ..................................................................................................... 11

Remote Control .................................................................................................. 12

Useful Functions

Changing the Projected Image................................................................15

Automatically Detect Incoming Signals and Change the Projected Image

(Source Search) ................................................................................................. 15

Changing Directly from the Remote Control ...................................................... 16

Functions for Enhancing Projection.......................................................17

Selecting the Projection Quality

(Selecting Color Mode) ...................................................................................... 17

Setting the Auto Iris............................................................................................ 18

Hiding the Image and Sound Temporarily (A/V Mute) .......................................18

Freezing the Image (Freeze).............................................................................. 19

Changing the Aspect Ratio ................................................................................ 20

Pointer Function (Pointer) .................................................................................. 24

Enlarging Part of the Image (E-Zoom) ............................................................... 25

Using the Remote Control to Operate the Mouse Pointer (Wireless Mouse)..... 27

Restrictions in the Target Projector when Using

Multiple Projectors ...................................................................................29

Setting the Projector ID ...................................................................................... 30

Setting the Projector ID on the Remote Control................................................. 30

Correcting Color for Multiple Projectors (Multi-Screen Color

Adjustment)...............................................................................................31

Summary of Correction Procedure.....................................................................31

Correction Method.............................................................................................. 31

Security Functions ...................................................................................33

Managing Users (Password Protect) ................................................................. 33

Restricting Operation (Control Panel Lock)........................................................ 35

Configuration Menu

Using the Configuration Menu................................................................ 38

List of Functions ...................................................................................... 39

Image Menu....................................................................................................... 39

Signal Menu....................................................................................................... 41

Settings Menu.................................................................................................... 43

Extended Menu.................................................................................................. 45

Network Menu (EB-1735W/1725 only) .............................................................. 47

Info Menu (Display Only) ................................................................................... 60

Reset Menu ....................................................................................................... 61

Troubleshooting

Using the Help ..........................................................................................63

Problem Solving.......................................................................................64

Reading the Indicators ....................................................................................... 64

When the Indicators Provide No Help................................................................ 67

Appendices

Installation Methods ................................................................................ 77

Cleaning ....................................................................................................78

Cleaning the Projector's Surface ....................................................................... 78

Cleaning the Lens .............................................................................................. 78

Cleaning the Air Filter ........................................................................................ 78

Replacing Consumables ......................................................................... 79

Replacing the Remote Control Batteries ........................................................... 79

Replacing the Lamp ........................................................................................... 80

Replacing the Air Filter ...................................................................................... 84

Optional Accessories and Consumables .............................................. 85

Saving a User's Logo............................................................................... 86

Making a WPS (Wi-Fi Protected Setup) Connection

with a Wireless LAN Access Point (EB-1735W/1725 only)................... 88

Connection Setup Method ................................................................................. 88

Screen Size and Distance........................................................................ 92

Projection Distance for EB-1725/1720............................................................... 92

Projection Distance for EB-1735W/1730W ........................................................ 93

Connecting and Removing USB Devices (EB-1735W/1725 only)........ 94

Connecting USB Devices .................................................................................. 94

Removing USB Devices .................................................................................... 94

Contents

Connecting with a USB Cable and Projecting

(USB Display EB-1735W/1725 only).......................................................95

Connecting ......................................................................................................... 95

Reading Problem Mail Notification Function

(EB-1735W/1725 only) ..............................................................................98

ESC/VP21 Commands..............................................................................99

Command List .................................................................................................... 99

Cable Layouts .................................................................................................... 99

USB Connection Setup .................................................................................... 100

Regarding Network Projector (EB-1735W/1725 only) .........................101

About PJLink ..........................................................................................102

List of Supported Monitor Displays......................................................103

Supported Monitor Displays for EB-1725/1720................................................ 103

Supported Monitor Displays for EB-1735W/1730W ......................................... 105

Specifications .........................................................................................107

Projector General Specifications...................................................................... 107

Software Requirement ..................................................................................... 109

Appearance .............................................................................................111

Glossary ..................................................................................................112

Index ........................................................................................................114

Projector Features

Features Common to Each Model

Ease of use

f Compact and lightweight

Easy to carry with its compact B5 file size body (202 mm (D) x 284 (W) x 65 mm (H)) and lightweight body (1.7 kg ~ 1.8 kg). *EB-1725/1735W:Approx. 1.8kg

EB-1720/1730W:Approx. 1.7kg

f The A/V mute slide makes it easy to project and store

You can stop and resume projection easily by opening and closing the A/V mute slide which makes giving clear presentations easier.

f A single foot design means you do not have to make any difficult

leveling adjustments

You can easily make height adjustments with one hand.

s Quick Start Guide

Enhanced security functions

f Password Protect to restrict and manage users

By setting a password you can restrict who can use the projector.

s p.33

f Control Panel Lock restricts button operation on the control panel

You can use this to prevent people changing projector settings without permission at events, in schools, and so on. s p.35

Easy to handle

f Short distance projection

The recommended shortest projection distance with the WXGA is 62 cm

(24 in.)* and 65 cm (26 in.) with the XGA, so projector can be placed close to the screen. Therefore, even in a small meeting room, you can easily setup the projector. *The projection screen size at this distance, for example, with a 16:10

screen size, is approximately 66 x 41 cm (26 x 16 in.).

f No cool down delay

After turning the projector’s power off, you can disconnect the projector’s power cable without having to wait for the projector to cool down first.

f Projection screen for WXGA (EB-1735W/1730W only)

With a computer that has a 16:10 wide LCD display, the image can be projected in the same aspect, whiteboards and other landscape format screens can be used.

Projector Features

EB-1735W/1725 Features

You can make effective use of your network by using the supplied "EPSON Projector Software for Meeting & Presentation" to perform efficient and varied presentations and meetings.

Multi-connection

f Connect a computer to the projector via a network

By connecting the projector to an already constructed network system via a supplied wireless LAN unit, you can have efficient meetings and so on as follows.

• From a conference room, you can open and project a file stored on a computer or file server in another room.

• You can use the Internet.

• You can monitor and control projectors on a network from the computer.

When you install the optional wired LAN unit in the projector, you can connect that to a computer via a network cable. s EasyMP Operation

Guide

f Projecting with network connection

The projector can be used in the following three ways.

• Quick Wireless Connection

Using the supplied USB key for Quick Wireless Connection, you can quickly connect one computer to one projector for projection. s EasyMP Operation Guide s Quick Start Guide

• Quick Connection Mode/Advanced Connection Mode

With EMP NS Connection, the computer and projector are connected via a network. s EasyMP Operation Guide

f Connect using a USB cable

(USB display)

Simply by connecting a commercially available USB cable to a Windows computer you can project images from the computer's screen. You can also get audio output without connecting an audio

cable. s Quick Start Guide s p.95

Presentations without a computer

Without computers, you can make presentations using JPEG images, movies, and scenarios stored on USB devices, such as digital cameras or hard disks. s EasyMP Operation Guide

Second and third screen projection (Multi-screen display)

You can project a different image from up to four projectors from one computer. This allows you to project a report and so on as a landscape screen. s EasyMP Operation Guide

Internet

f Connection with Windows Vista's "Network Projector"

By connecting the projector to a network and using the "Network Projector" function in Windows Vista, multiple users on the network can share the projector.

Part Names and Functions

Front/Top

Name Function

Air exhaust vent

A/V mute slide

knob

Caution

Do not place objects that may become warped or otherwise affected by heat near the air exhaust vent and do not put your face or hands near the air exhaust vent while projection is in progress.

Slide the knob to open and close the A/V mute slide.

Name Function

A/V mute slide Slide shut when not using the projector to

protect the lens. By closing during projection you can hide the image and the sound (A/V Mute). s Quick Start Guide, s p.18

Foot adjust lever Pull out the foot lever to extend and retract the

front foot. s Quick Start Guide

Front adjustable

foot

Remote receiver Receives signals from the remote control.

Air filter (Air

intake vent)

Wireless LAN unit

cover (EB-1735W/1725 only)

Focus ring Adjusts the image focus. s Quick Start

Zoom ring Adjusts the image size. s Quick Start Guide

USB indicator

(EB-1735W/1725 only)

Extend and adjust the position of the projected image when the projector is placed on a surface such as a desk. s Quick Start Guide

s Quick Start Guide

This prevents dust and other foreign particles from getting inside the projector when air is drawn in. The projector displays a warning message when it is time to clean or replace the air filter. s p.78, p.84

When making a wireless connection between the projector and computer, remove this cover to install the wireless LAN unit. s Quick Start

Guide

Indicates USB Type A access status. OFF: USB device is not connected Orange Light ON: USB device is connected Green Light ON: PC Free is in operation Red Light ON: Error

Control panel s p.11

Part Names and Functions

Name Function

Lamp cover Open this cover when replacing the projector's

lamp. s p.80

Rear

Name Function

S-video input port For S-video signals from video sources.

Power inlet Connects to the power cable. s Quick Start

Guide

Video input port For composite video signals from video

sources.

Remote receiver Receives signals from the remote control.

s Quick Start Guide

Security slot The security slot is compatible with the

Microsaver Security System manufactured by Kensington. You can find details about the Microsaver Security System on the Kensington homepage http://www.kensington. com/

Screw hole for

the lamp cover

Screw hole to fix the lamp cover in place.

s p.80

Part Names and Functions

Name Function

USB port (Type A)

(EB-1735W/1725 only)

USB port (Type B) Connects the projector to a computer by a

Audio-L/R input

port

Computer

(Component Video) input port

Connects the memory for compatible digital cameras and USBs, and projects image/movie files and scenarios with the PC Free of EasyMP. s p.94

USB cable, and the image on the computer is projected. (EB-1735W/1725 only) s Quick

Start Guide

Use this port also to connect with a computer to use the wireless mouse function. s p.27

For the audio signal of connected equipment. When projecting with the PC Free function of EasyMP, you can output the audio to an external speaker by setting "EasyMP Audio Out" from the configuration menu. (EB-1735W/ 1725 only)

For video signals from a computer and component video signals from other video sources.

Part Names and Functions

Base

Name Function

Screw hole for

the wireless LAN unit cover

Screw hole to fix the wireless LAN unit cover.

s Quick Start Guide

Name Function

Ceiling mount

fixing points (3 points)

Rear foot When setup on a desk, turn to extend and

Attach the optional ceiling mount here when suspending the projector from a ceiling.

s p.77, 85

retract to adjust the horizontal tilt. s Quick Start Guide

Part Names and Functions

Control Panel

Name Function

Status indicators The color of the indicators and whether they

are flashing or lit indicate the status of the projector. s p.64

[t] button Turns the projector power on or off. s Quick

Start Guide

[Source Search]

button

Changes to the next input source that is connected to the projector and is sending an image. s p.15

Name Function

[Enter] button If pressed during projection of computer signal

images, it automatically adjusts the tracking, synchronization, and position to project the optimum image. When a configuration menu or a help screen is displayed, it accepts and enters the current selection and moves to the next level. s p.38

[] [] buttons

[Help] button Displays and closes the help screen which

[Esc] button Stops the current function.

[] [] buttons

Corrects keystone distortion. In the following cases, however, these buttons only have the

[ ] and [ ] functions.

• When the projected image is being sent through a network connection

• When the PC Free function is being used for projection

If pressed when a configuration menu or a help screen is displayed, these buttons select menu items and setting values. s Quick Start Guide, p.38

shows you how to deal with problems if they occur. s p.63

If pressed when a configuration menu is displayed, it moves to the previous menu level.

s p.38

Adjusts the volume. If pressed while a configuration menu or a help screen is

displayed, these buttons only have the [ ] and [ ] functions which select menu items

and setting values. s Quick Start Guide,

p.38

[Menu] button Displays and closes the configuration

menu.s p.38

Part Names and Functions

Remote Control

Name Function

[t] button Turns the projector power on or off. s Quick

Start Guide

[Computer]

button

[S-Video] button Changes to images from the S-video input

Numeric buttons Use when specifying password entry or remote

[A/V Mute] button Turns the video and audio on or off. s p.18

[Freeze] button Images are paused or unpaused. s p.19

[Auto] button If pressed during projection of computer signal

[Aspect] button The aspect ratio changes each time the button

Changes to images from the computer input port. s p.16

port. s p.16

control ID. s p.33, p.30

images, it automatically adjusts the tracking, synchronization, and position to project the optimum image.

is pressed. s p.20

[Page] buttons

([) (])

[E-zoom] buttons

[z] [x]

[Menu] button Displays and closes the configuration menu.

Moves to the next/previous slide when using the wireless mouse function, or projecting a PowerPoint file or a scenario from EasyMP as input source. (EB-1735W/1725 only)

s EasyMP Operation Guide

(z) Enlarges the image without changing the projection size. (x) Reduces parts of images that have been enlarged using the [z] button.

s p.38

Part Names and Functions

Name Function

[ ] button

[Enter] button When a configuration menu or a help screen is

[Esc] button Stops the current function. If pressed when a

[Volume] buttons

[a] [b]

[Pointer] button Press to activate the on screen pointer.

[Help] button Displays and closes the help screen which

When a configuration menu or help screen is displayed, it selects menu items and setting values. s p.38, p.63

displayed, it accepts and enters the current selection and moves to the next level. s p.38,

p.63

Acts as a mouse's left button when using the wireless mouse function.

configuration menu is displayed, it moves to the previous level. s p.38, p.63 Acts as a mouse's right button when using the wireless mouse function.

(a) Decreases the volume. (b) Increases the volume.

s Quick Start Guide

s p.24

shows you how to deal with problems if they occur. s p.63

Name Function

[User] button Press to assign a frequently used item from

the six available Configuration menu items. By pressing the button the assigned menu item selection/adjustment screen is displayed, allowing you to make one-touch settings/ adjustments. s p.43 "Brightness Control" is assigned as the default setting.

[ID] button Press to set the remote control ID. s p.30

[Video] button Changes to images from the video input port.

s p.16

[EasyMP] button Changes to the EasyMP image. (EB-1735W/

1725 only) s p.16 When using EB-1730W/1720, this does not function even if the button is pressed.

[Search] button Changes to the next input source that is

connected to the projector and is sending an image. s p.15

Remote control

light-emitting area

Outputs remote control signals.

[Color Mode]

button

[Num] button Use when entering a password. s p.33

Each time the button is pressed, the color mode changes. s p.17

Useful Functions

This chapter explains useful functions for giving presentations and so on, and the security functions.

Changing the Projected Image..........................15

• Automatically Detect Incoming Signals and

Change the Projected Image (Source Search)................15

• Changing Directly from the Remote Control .................16

Functions for Enhancing Projection.................17

• Selecting the Projection Quality

(Selecting Color Mode) .....................................................17

• Setting the Auto Iris..........................................................18

• Hiding the Image and Sound Temporarily

(A/V Mute) .........................................................................18

• Freezing the Image (Freeze).............................................19

• Changing the Aspect Ratio...............................................20

Changing methods..........................................................................20

Changing the aspect for video equipment images..........................20

Changing the aspect for computer images (For EB-1725/1720)...21 Changing the aspect for computer images images

(For EB-1735W/1730W)...........................................................22

Restrictions in the Target Projector when

Using Multiple Projectors...................................29

• Setting the Projector ID ................................................... 30

• Setting the Projector ID on the Remote Control ........... 30

Correcting Color for Multiple Projectors

(Multi-Screen Color Adjustment).......................31

• Summary of Correction Procedure ................................ 31

• Correction Method ........................................................... 31

Security Functions..............................................33

• Managing Users (Password Protect)............................... 33

Type of Password Protect .............................................................. 33

Setting Password Protect................................................................ 33

Entering the Password.................................................................... 35

• Restricting Operation (Control Panel Lock) ................. 35

• Pointer Function (Pointer) ...............................................24

• Enlarging Part of the Image (E-Zoom) ...........................25

• Using the Remote Control to Operate the Mouse

Pointer (Wireless Mouse) .................................................27

Changing the Projected Image

You can change the projected image in the following two ways.

• Changing by Source Search The projector automatically detects signals being input from connected equipment, and the image being input from the equipment is projected.

• Changing directly You can use the remote control buttons to change to the target input port.

Automatically Detect Incoming Signals and Change the Projected Image (Source Search)

You can project the target image quickly as input ports with no image signal being input are ignored when you change by pressing the [Source Search] button.

Computer Video

The input port where no image signal is being input is skipped.

S-video

Procedure

When your video equipment is connected, start playback before beginning this operation.

Using the remote control Using the control panel

When two or more pieces of equipment are connected, press the [Source Search] button until the target image is projected.

The following screen showing the status of image signals is

displayed when only the image that the projector is currently displaying is available, or when no image signal can be found. You can select the input port where the connected equipment you want to use is projecting. If no operation is performed after about 10 seconds, the screen closes.

*Only EB-1735W/1725 changes to EasyMP.

EasyMP

Changing the Projected Image

Changing Directly from the Remote Control

You can change directly to the target image by pressing the following buttons on the remote control.

Remote control

Changes to images from the computer input port.

Changes to images from the S-video input port.

Changes to the EasyMP image. (EB-1735W/1725 only) When using EB-1730W/ 1720, this does not function even if the button is pressed.

Changes to images from the video input port.

Functions for Enhancing Projection

Selecting the Projection Quality (Selecting Color Mode)

You can easily obtain the optimum image quality simply by selecting the setting that best corresponds to your surroundings when projecting. The brightness of the image varies depending on the mode selected.

Mode Application

Game Ideal for use in a bright room. This is the brightest

mode, and reproduces shadow tones well. If you are worried about image delays during projection for games involving speed, try turning setting "Progressive" from the configuration menu to "Off". s p.41

Presentation Ideal for making presentations using color materials

in a bright room.

Tex t Ideal for making presentations using black-and-

white materials in a bright room.

Theatre Ideal for watching films in a dark room. Gives

images a natural tone.

Photo (When computer images are input)

Ideal for projecting still pictures, such as photos, in a bright room. The images are vivid and brought into contrast.

Sports (When component video, S-video, or composite

video images are input) Ideal for watching TV programmes in a bright room. The images are vivid and brought to life.

Mode Application

Customized Select "Customized" to adjust "R,G,B,C,M,Y" from

"Color Adjustment" in the configuration menu.

s p.39

Procedure

Remote control

Each time you press the button, the color mode name is displayed on the screen and the color mode changes.

If you press the button while the color mode name is displayed on the screen, it changes to the next color mode.

The color mode can also be set using "Color Mode" in the

"Image" menu from the configuration menu.

p.39

sRGBg Ideal for images that conform to the sRGB color

standard.

Blackboard Even if you are projecting onto a blackboard

(greenboard), this setting gives your images a natural tint, just like when projecting onto a screen.

Functions for Enhancing Projection

Setting the Auto Iris

By automatically setting the luminance according to the brightness of the displayed image, it lets you enjoy deep and rich images.

Procedure

Press the [Menu] button and select "Image" - "Auto Iris" from the configuration menu. s "Using the Configuration Menu" p.38

Using the remote control Using the control panel

Select "On".

The setting is stored for each color mode.

Hiding the Image and Sound Temporarily (A/V Mute)

You can use this when you want to focus the audience's attention on what you are saying, or if you do not want to show details such as when you are changing between files during presentations from a computer.

Procedure

Remote control

Press the [Menu] button to close the configuration menu.

Auto Iris can be set only when the color mode is Game, Theatre or Customized.

Each time you press the button, A/V Mute turns on or off.

Functions for Enhancing Projection

• If you use this function when projecting moving images,

the images and sound continue to be played back by the source, and you cannot return to the point where A/V Mute was activated.

• You can choose to display black, blue, or logo as the A/V mute display using the "Extended"-"Display"-"A/V Mute" setting from the configuration menu.

• You can set so that the projector automatically turns off about 30 minutes after the A/V mute slide is closed and A/V mute begins. To make the setting, use "Extended" "Sleep Mode" of the configuration menu.

p.46

Freezing the Image (Freeze)

When the moving image on the screen is frozen, the image continues to project, so you can project a moving image one frame at a time like a still photo. Also, you can perform operations such as changing between files during presentations from a computer without projecting any images if the freeze function is activated beforehand.

p.45

Procedure

Remote control

Each time you press the button, Freeze turns on or off.

• Audio does not stop.

• The image source continues to playback the moving images even while the screen is frozen, and so it is not possible to resume projection from the point where it was paused.

• If the [Freeze] button is pressed while the configuration menu or a help screen is displayed, the menu or help screen being displayed is cleared.

• Freeze still works while E-Zoom is being used.

Functions for Enhancing Projection

l16

Changing the Aspect Ratio

Change the aspect ratiog when video equipment is connected so that images that have been recorded in digital video or onto DVDs can be viewed in 16:9 wide-screen format. Change the aspect ration when projecting computer images at full size. The changing methods and the types of aspect ratio are as follows.

f Changing methods

Procedure

Remote control

f Changing the aspect for video equipment images

For EB-1725/1720

4:3

For EB-1735W/1730W

orma

16:9

Through

Zoom

Each time you press the button, the aspect name is displayed on the screen and the aspect changes.

If you press the button while the aspect name is displayed on the screen, it changes to the next aspect mode.

The aspect ratio can also be set using "Aspect" in the

"Signal" menu from the configuration menu.

p.41

Functions for Enhancing Projection

f Changing the aspect for computer images (For EB-1725/1720)

When projecting images input from a computer image input port, you can change the aspect as follows.

Set Values Operation Projection example

Normal When images are

input from the computer input port

4:3 Projects to the full projection size at an aspect of

Projects to the full projection size retaining the aspect of the input image.

When a 1280 ^ 1024 signal is input

4:3. This is ideal for when you want to project images at an aspect of 5:4 (1280 ^ 1024) to the full projection size.

16:9 Projects at a 16:9 aspect. This is ideal for

projecting at full screen size when using a 16:9 screen.

When projecting computer images, if parts of the image are missing or it cannot project everything, set "Wide" or "Normal" in

"Resolution" from the configuration menu depending on the size of the computer panel.

Normal

When a 1280 ^ 1024 signal is input

p.41

4:3

Functions for Enhancing Projection

f Changing the aspect for computer images (For EB-1735W/1730W)

When projecting images input from a computer image input port, you can change the aspect as follows. EB-1735W/1730W offer WXGA 1280 x 800 resolution (aspect ratio 16:10). When projecting onto 16:9 screens, set the aspect to "16:9".

Set Values Operation Projection example

Normal When images are

input from the computer input port

Projects to the full projection size retaining the aspect of the input image.

When a 1024 ^ 768 signal is input

16:9 Projects to the full projection size at an aspect of

16:9.

Full Project at full size. When a 1024 ^ 768 signal is input

Zoom Projects the input image at the lateral direction

aspect size as it is. Parts that extend beyond the projection size are not projected.

When a 1024 ^ 768 signal is input

Functions for Enhancing Projection

Set Values Operation Projection example

Through Projects at the resolution of the input image size

to the center of the screen. This is ideal for projecting clear images. If the image resolution exceeds 1280 ^ 800, the edges of the image are not projected.

When projecting computer images, if parts of the image are missing or it cannot project everything, set "Wide" or "Normal" in

"Resolution" from the configuration menu depending on the size of the computer panel.

When an 800 ^ 600 signal is

input

p.41

When a 1400 ^ 1050 signal is

input

Functions for Enhancing Projection

Pointer Function (Pointer)

This allows you to move a pointer icon on the projected image, and helps you draw attention to the area you are talking about.

Procedure

Display the pointer.

Remote control

When pressed in conjunction with the adjacent [ ] button, the pointer can be moved diagonally in addition to up/down and left/right.

Move the pointer icon.

Remote control

Pointer icon

You can choose from three different kinds of pointer ( · · ) in "Settings

configuration menu.

" - "Pointer Shape" from the

p.43

icon

Each time you press the button, the pointer appears or disappears.

Functions for Enhancing Projection

Enlarging Part of the Image (E-Zoom)

This is useful when you want to expand images to see them in greater detail, such as graphs and tables.

Procedure

Start E-Zoom.

Remote control

When pressed in conjunction with the adjacent [ ] button, the pointer can be moved diagonally in addition to up/down and left/right.

Move the cross to the area of the image that you want to enlarge.

Remote control

Cross

Functions for Enhancing Projection

Enlarge.

Remote control

Each time the button is pressed, the area is expanded. You can expand quickly by holding the button down. You can reduce the enlarged image by pressing the [x] button. Press the [Esc] button to cancel.

• The enlargement ratio appears on the screen. The selected area can be enlarged to between 1 to 4 times in 25 incremental steps.

• Press the [ ] button to scroll the image.

• If E-Zoom is selected when Progressive is being performed, the function currently being performed is temporarily cancelled.

Functions for Enhancing Projection

Using the Remote Control to Operate the Mouse Pointer (Wireless Mouse)

Connect the USB port of a computer and the USB port (TypeB) on the

rear of the projector with a commercially available USB cable*. If the "Extended" - "USB TypeB" setting in the configuration menu is set to "Wireless Mouse", you can use the projector's remote control like a wireless mouse to control the computer's mouse pointer. s p.46

Computer

Windows:98/98SE/2000/Me/XP Home Edition/ XP Professional/Vista Home Basic/Vista Home Premium/ Vista Business/Vista Enterprise/Vista Ultimate

Macintosh:OS8.6-9.2/10.0-10.5

* Supplied with the EB-1735W/1725.

• It may not be possible to use the mouse function under some versions of both the Windows and Macintosh operating systems.

• Some computer settings may have to be changed in order for the mouse function to be used. Consult the documentation for the computer for further details.

To USB port

USB cable

To USB port (Type B)

Functions for Enhancing Projection

Once the connection has been made, the mouse pointer can be operated as follows.

Moving the mouse pointer Mouse clicks

Left click Right click When pressed in conjunction with the adjacent [ ] button, the pointer can be moved diagonally in addition to up/down and left/right.

Double-click: Press twice in rapid succession.

Drag and drop This is useful for displaying

the previous or next slide in a PowerPoint slideshow.

• If the mouse button settings are set to reverse on the computer, the operation of the remote control buttons will also be reversed.

• The wireless mouse function cannot be used while the following functions are being used.

· While a configuration menu is being displayed

· While a help menu is being displayed

· While the E-Zoom function is being used

· While a user's logo is being captured

· While a pointer function is being used

· While adjusting sound volume

When pressed in conjunction with the adjacent [ ] button, the pointer can be moved diagonally in addition to up/down and left/right.

1. While holding down the [Enter] button, press the [ ] button.

2. Release the [Enter] button to drop at the desired location.

To previous slide

To next slide

Restrictions in the Target Projector when Using Multiple Projectors

When an ID is set for the projector and the remote control, you can use the remote control to operate only the projector with a matching ID. This is very useful when managing multiple projectors. You can set an ID for the projector within a range of "1" to "9". While the projector’s ID setting is "OFF" (default setting), the remote control can be used regardless of the ID setting on the remote control. You can set a projector ID on the remote control within a range of "0" to "9". While the ID setting is "0" (default setting), the remote control can be used regardless of the projector’s ID setting. The ID setting on the remote control is reset to "0" each time you switch off the projector.

Remote Control: On (enabled) Remote Control: Off (disabled) Remote Control: On (enabled) Remote Control: On (enabled)

Projector ID: 1

Remote control ID: 1

The ID is matched between the projector and remote control

Projector ID: 1

Remote control ID: 3

The ID is mismatched between the projector and remote control

Projector ID: Off

Remote control ID: 1

Projector ID: any of 1 to 9

Remote control ID: 0

When the projector ID is Off When the ID setting on the

remote control is "0"

Restrictions in the Target Projector when Using Multiple Projectors

Setting the Projector ID

Procedure

During projection, press the [Menu] button on the projector and select "Extended" - "Projector ID" from the configuration menu. s "Using the Configuration Menu" p.38

Using the remote control Using the control panel

Setting the Projector ID on the Remote Control

Set the ID on the remote control each time you switch the projector power on.

Procedure

During projection, point the remote control at the remote receiver of the target projector. When you press the [ID] button on the remote control, the projector ID and remote control operation On/Off display is shown at the top right of the projection screen.

When remote control operations are

enabled:

When the display reads Off

While holding the [ID] button, press a number button to select a number to match the ID of the projector you want to operate.

B C

Choose the ID you want to set and press the [Enter] button.

Press the [Menu] button to close the configuration menu.

Keep pressed

Once this setting has been made, the projector that can be operated by the remote control is limited.

+ 86 hidden pages