Gaggenau VK414610 Specification Sheet

Product Features
Product name / series name

Vario/Domino steam cooker

Construction type

CONSTR_TYPE.Built-in

Energy source

Electric

Total number of cooktop burners
Type of control
Required cutout size (HxWxD) (mm)

280 x 360 x 490

Width of the product (mm)

380

Overall appliance dimensions (HxWxD)
(mm)

283.0 x 380 x 520

Net weight (kg)

14.000

Gross weight (kg)

16.000

Residual heat indicator
Location of control panel

Hob front

Basic surface material
Color of surface

Stainless steel, Stainless steel

Color of frame

Stainless steel

Approval certificates

ETL, ETL C

Power Cord Length

180.0

Consumption and connection features
Watts (W)

2200

Gas connection rating (W)
Current (A)

10; 15

Volts (V)

208-240

Frequency (Hz)

50; 60

2013-11-29
Page 1

VK414610
Vario in-counter steamer 400 series

Stainless steel
Width 15 ''

Steaming in cooktop size
Electronic water temperature control
from 100 °F to 200 °F, in 5 °F
increments.
Cooking on two levels, without flavor
transfer
Solid stainless steel control knob
Precision crafting of 1/8-inch
stainless steel
For surface mount installation with a
visible edge or for flush installation
Can be perfectly combined with other
Vario products of the 400 series

Cooking zones

Water capacity 1 - 6.4 quarts (1 - 6
liters).

Operation

Two control knobs with illuminated ring,
temperature marking and water drain.
Electronic water temperature
control from 100 °F to 200 °F, in 5°
increments.

Features

Steam cooking level with electronic
steam control for pressureless cooking.
Automatic boiling point detection.
Motor-driven 1/2” water drain valve

Safety

Safety lock.

Planning notes

Depending on the type of installation

- surface-/ or flush-mounted, with or
without cover - the specific location of
the control knob positions may vary.
When using the appliance cover VA 440
or adjustment strip VA 450 additional
space for cut-out depth needs to be
considered.
In a combination of Vario cooktops
with at least one appliance cover, the
adjustment strip VA 450 is required.
In a combination of several Vario 400
series cooktops a connection strip
must be used. Depending on the type
of installation - surface-/ or flush­mounted, with or without cover - the
respective VA 420 connecting strip
must be used.
For flush installation the edge height
in the cut-out needs to be at least 1/2"
and for surface-mount 3/8". Ensure a
continuous cut surface of 90°.
The weight capacity and stability,
especially in case of thin countertops,
must be supported using suitable
substructures. Take the appliance
weight and additional loads into
account.
Flush installation is possible in
countertops made of stone, synthetics
or solid wood. Heat resistance and
watertight sealing of the edges must
be observed. For other materials,
please consult with your countertop
manufacturer.
The groove must be continuos and
even, so that uniform placing of the
appliance on the gasket is ensured. Do
not use discontinuos lining.
The joint width may vary due to size
tolerances of the combinations and of
the countertop cut-out.
If installing several Vario products in
individual cut-outs allow for a minimum
distance of 2" inbetween the cooktops.
Built-in control panel can be integrated
in the bottom cabinet at drawer level.
Front panel thickness 5/8" - 1".

Rating

Color Variants
VK414610

Stainless steel

VK414610
Vario in-counter steamer 400 series

Stainless steel
Width 15 ''

2013-11-29
Page 2