VI 424 610
Stainless steel frame
Width 15" (38 cm)
Installation accessories
In combination of several Vario
cooktops or VL 414 downdraft,
connecting strips must be used.
Choose respective VA 420 strip
from one of the below, depending
on type of installation.
VA 420 010
Connection strip for surface-mount
installation without appliance cover.
VA 420 011
Connection strip for surface-mount
installation with appliance cover.
VA 420 000
Connection strip for flush
installation without appliance cover.
VA 420 001
Connection strip for flush
installation with appliance cover.
VA 440 010
Stainless steel cover with mounting
strip
VA 450 400
Stainless steel adjustment strip,
width 15". Necessary accessory in
a combination of 15" Varios with at
least one appliance cover to compensate for the appliance depth.
Optional accessories
GP 900 001
Stainless steel frying pan
Non-stick cooking, for ø 6"
cooking zone.
GP 900 002
Stainless steel frying pan
Non-stick coating, for ø 7"
cooking zone.
GP 900 003
Stainless steel frying pan
Non-stick coating, for ø 8"
cooking zone.
Vario 400 series induction cooktop
VI 424
– 2 cooking zones with Power
boost function
– Total output 3,600 W
– Solid stainless steel control
knobs
– Precision-crafted ⅛-inch
stainless steel frame
– For surface-mount installation
with a visible edge or for flush
installation
– Can be perfectly combined with
other Vario 400 series products
Cooking zones
One ø 8 ¼" induction cooking zone
(2,200 W, 3,300 W with Power
boost).
One ø 5 ⅞" induction cooking zone
(1,400 W, 1,800 W with Power
boost).
Operation
Control knobs with illuminated
ring, cooking zone and output level
markings.
Electronic control in 12 output levels.
Features
Cooking zone marking.
Power boost function for each
cooking zone (only one zone at a
time can be operated with booster
function)
Pan detection.
Short-term timer.
Safety
Individual residual heat indication.
Safety lock.
Planning notes
Depending on the type of
installation — surface-/ or
flush-mounted, with or without
cover — the specific location of the
control knob positions may vary.
When using the appliance cover
VA 440 or adjustment strip VA 450
additional space for cut-out depth
needs to be considered.
In a combination of Vario cooktops
with at least one appliance cover,
the adjustment strip VA 450 is
required.
In a combination of several Vario
400 series cooktops a connection
strip must be used.
Depending on the type of
installation — surface-/ or
flush-mounted, with or without
cover — the respective VA 420
connecting strip must be used.
For flush installation the edge
height in the cut-out needs to be at
least ½" and for surface-mount ⅜" .
Ensure a continuous cut surface
of 90°.
The weight capacity and stability,
especially in case of thin
countertops, must be supported
using suitable substructures. Take
the appliance weight and additional
loads into account.
Flush installation is possible
in countertops made of stone,
synthetics or solid wood. Heat
resistance and watertight sealing
of the edges must be observed. For
other materials, please consult with
your countertop manufacturer.
The groove must be continuous and
even, so that uniform placing of the
appliance on the gasket is ensured.
Do not use discontinuous lining.
The joint width may vary due to size
tolerances of the combinations and
of the countertop cut-out.
If installing several Vario products
in individual cut-outs allow for a
minimum distance of 2" between
the cooktops.
Operates with magnetic (induction)
iron pots and pans only. For an
optimal heat distribution, the use
of sandwich bottom cookware is
recommended.
Immersion depth 2 ⅝" – 2 ¾"
depending on type of installation.
Built-in control panel can be
integrated in the bottom cabinet at
drawer level.
Front panel thickness ⅝" – 1".
The adjacent drawing “Installation
of the control knobs” must be
observed if the panel is more than
1" thick (there must be a recess at
the rear for proper control module
installation).
Appliance clicks into place when
inserted into the countertop from
above.
Please read additional planning
notes on pages 72 – 79.
Rating
Total rating: 3.6 kW.
Total Amps: 16.
208 / 220-240V / 60Hz
Total connected load 3.6 kW.
Plan for a 37" connecting cable
without plug (hard wire required).
50 Vario cooktops
90°
1
/
8
"
(3.5
-0.5
)
R
1
/
8
" (3)
R
3
/
16 "
(5
+1
)
39" (1.0 m)
min. 1
3
/
8
" (35)
min. 4
1
/
4
" (109)
max. 6
1
/
2
" (166)
min. 2"
(50)
dia. 2
1
/
8
" (60)
dia. 1
3
/
8
" (35)
14
15
/
(380)
20
1
/
" (520)
*21
1
/
" (*535)
19
3
/
±1
/
" (492
±2
)
*20
1
/
+1
/
" (*515
+2
)
20
11
/
+1
/
" (526
+2
)
*21
1
/
+1
/
" (*541
+2
)
14
3
/
±1
/
(360
±2
)
15
3
/
+1
/
(386
+2
)
**2
3
/
" (70)
1
/
(3)
3
9
/
(90)
8
15
/
(227)
2
13
/
(72)
11"
(280)
3"
(76)
Surface-mount Installation Flush-mount Installation
Control knob installation, surface-mounted installation
Control knob installation, flush-mounted installation
Longitudinal section
Cross-section
153/16"+1/16"
1
5
**2
/
8
39" (1.0 m)
3
1
/ 8 " (35)
min. 2" (50)
1
min. 4
max. 6 3 / 8 " (162)
/ 8 " (3)
" (67)
/ 8 " (105)
15
14
/ 16 "
(380)
20
*21
19
*20
9
3
/ 16 " (90)
3
14
/ 16 "
(360
1
2
/
1
/
3
/ 8 "
1
/
±1
/ 16 "
±2
)
" (520)
16
4 "
" (*535)
±1
/ 16 " (492
+1
16
/
" (*515
dia. 1 3 / 8 " (35)
dia. 2
2
±2)
+2
1
/ 8 " (60)
13
/ 16 "
(72)
)
1
R
15
8
/ 16 "
(227)
11"
(280)
/ 8 " ( 3)
90°
3"
(76)
4
16 "
16 "
2
16
16 "
16 "
16 "
16 "
8 "
16 "
8 "
4 "
16
16
16 "
4 "
16
16
16 "
* with appliance cover or adjustment strip. See separate planning notes on page 77.
** 3 ⁹⁄₁₆"(90) in the area of the wire connection (rear, right).
Installation of the control knob; surface-mount installation
1
min.
3
/16" (5)
5
/ 8 "-1"
(16-26)
3
4
/ 8 "-6
/ 8 "
(105-162)
ø 13/8" (35) ø 13/8" (35)
3
min.
/16" (5)
1
3
/ 8 "x12
(80x310)
3
/ 16 "
1
4
/ 8 "-6
(105-162)
D =1" (26)
D > 1" (26)
3
/ 8 "
* with appliance cover or adjustment strip. See separate planning notes on page 77.
** 3 ¹¹⁄₁₆"(93) in the area of the wire connection (rear, right).
Installation of the control knob; flush-mount installation
1
min.
3
/16" (5)
5
/ 8 "-1"
(16-26)
1
4
/ 4 "-6
/ 2 "
(109-166)
ø 13/8" (35) ø 13/8" (35)
3
min.
/16" (5)
1
3
/ 8 "x12
(80x310)
3
/ 16 "
1
4
/ 4 "-6
(109-166)
D =1" (26)
D > 1" (26)
1
/ 2 "
View from above
(386+2)
3
14
/16"±1/16"
±2
(360
11
/16"+1/16"
20
+2
)
(526
1
/4"+1/16"
*21
(*541
* with appliance cover or adjustment strip (observe front and rear
asymmetrical assembly. See separate notes “assembly with appliance
cover/adjustment strip” on page 77).
3
+2
19
/8"±1/16"
)
±2
)
(492
1
/4"+1/16"
*20
+2
)
(*515
R
(R 3)
1
/8"
R 3/16"
)
(R 5
+1
)
Numbers indicated
inside parenthesis ( ) = mm
Longitudinal section
1
/8"
+1
)
(3
1
/2"
(13)
Cross-section
1
/8"
(3+1)
11
/16"
(17)
When installing with appliance cover or adjustment strip, pay attention to
the deeper cut-out and the front and rear groove width.
15
/16"
14
(380)
3
/16"±1/16"
14
±2
)
(360
3
15
/16"+1/16"
+2
)
(386
1
/2"
20
(520)
3
19
/8"±1/16"
±2
)
(492
2011/16"+1/16"
+2
)
(526
11
/16"
(17)
(3
1
(3+1)
1
/8"
1
/2"
(13)
/8"
fill with
silicone
+1
)
1
-0.5
/8" (3.5
)
fill with
silicone
1
-0.5
/8" (3.5
)
Vario cooktops 51
Loading...