Reliable MF/HF Radiotelephone
for general and distress communications
s
with integrated DSC/DSC Watch Receiver
Models:
▲
MF/HF radiotelephone with DSC facility
▲
Fully meets GMDSS carriage requirements for SOLAS ships operating in A2, A3 and A4 sea area
▲
Meets the new ITU recommendation on digital selective calling system for use in the Maritime
Mobile Service, ITU-R M.493-13
▲
High-contrast 4.3" bright color LCD (480x272 pixels)
▲
Capable of distress, safety and routine communication
▲
Instant selection of 256 user-specied channels with a rotary knob or direct keypad input
▲
Quick access to DSC message composition by dedicated keys on the control unit
▲
Full-duplex kit available (optional supply for the FS-5075 only)
▲
Quick access to dedicated functions in the menu operation using numeric keypad
FS-1575 (150 W)
FS-2575 (250 W)
FS-5075 (500 W)
Page 3
RX frequency setting, class of emission setting, AGC setting, output power setting, TX
ansmission, distress alert reception,
High-contrast 4.3" bright color LCD
Display Modes
Radiotelephone display
1
2
1
2
34
83
72
56
DSC SCAN display
1
2
1
33
1 Status segment
Indicating the status of equipment, i.e., speaker ON/OFF, unread DSC message in the inbox, hardware error, etc.
Also, MMSI is shown in radiotelephone and DSC scan displays.
2 Information segment
Displaying:
1 user channel selected
2 operating frequencies
3
class of emission, AGC, output power and communication mode
4
signal strength, meter reading (IC, VC, RF, VS and IA (antenna current))
5 currently activated functions, i.e., noise blanker, etc.
6
short-cut functions assigned for 1, 4 and 7 on the numeric keypad
7 own ship L/L, Time
8 indications of RF input attenuator ON/OFF as well as RF gain
2 Information segment
Displaying:
1 DSC watch frequencies (both distress and routine)
2 own ship L/L, Time
3 indications of RF input attenuator ON/OFF as well as RF gain
3Tab segment
Up to 7 active procedures can be displayed in this segment. The procedures are for operating: radiotelephone, distress alert tr
general DSC message transmission and general DSC message reception.
Quick-access functions
Quick-access functions
On the menu setting, three quick-access functions can be assigned for 1, 4 and 7 on
the numeric keypad, and those assigned functions are displayed on the Radiotelephone
display. The list of functions assigned for quick-access includes: TX frequency setting,
frequency monitoring, showing the list of test messages, showing the list of message
files, execusion of daily test, showing the list of log files, and intercom functions.
Press
Press
Press
Page 4
DSC display
Menu display
11
1
22
3
2
4
3
1 Status segment
Indicating status of equipment, i.e., speaker ON/OFF, unread DSC message in the inbox, hardware error, etc., TX/RX
frequencies/class of emission for successive communication.
2 Information segment
Displaying:
1 DSC contents, status and information
2 a list of available operator actions
3 indications of RF input attenuator ON/OFF as well as RF gain
2 Information segment
Displaying menu tree
4 Guide segment
Guide to short-cut key functions is displayed.
F1, F2 and F3 on the menu
represent the functions
assigned for 1, 4 and 7
on the numeric keypad,
respectively.
Press
Night Mode
Night mode is selectable for wheelhouse operation.
Page 5
Control Panel
Simplified menu operation
Numbers are assigned for each of the menu items, and the operator
can access each of the menu items either by turning and pressing
PUSH TO ENTER knob to select menu items or simply pressing
number on the numeric keypad.
12
1 Volume/Power knob :
2 RF GAIN knob :
PUSH TO ATT :
3 :
4 :
:
Press + :
5 :
:
:
:
:
3
4
7
5
6
Press
PressPress
Sound volume control/Switching of Power ON/OFF
Adjustment of reception gain
Press to activate/deactivate RF attenuator
Long-press to transmit a DSC distress alert
Composition of DSC message for distress alert
Composition of DSC message except for distress alert and DROBOSE (DSC relay on behalf of someone else*)
Composition of DSC message for DROBOSE
Activation of the brilliance control dialog box
Activation of tab segment control on the screen
Opening/closing of the menu dialog box
Deactivates alarm/deletion of error and pop-up messages/halting of DSC message composition/exiting from the
message composition dialog box/distress cancellation/returning to a previous menu level
Switching the speaker ON/OFF
6 PUSH TO ENTER knob :
7 :
:
:
:
:
:
:
:
:
:
:
:
:
:
:
Shifts the selector and pointer/adjusts the degree of parameter, i.e., brilliance and switch over the display mode
Press to confirm the entered values
Switches to the DSC SCAN mode/if pressed during the DSC SCAN mode, routine scan will be halted
Sets to 2182 kHz SSB
Switches to radiotelephone mode, and if pressed in radiotelephone mode, channel setting box will be summoned
Used to enter the following number and symbols (. @ - _ / : 1) as well as quick access to short cut function
Used to enter A, B, C and 2, and to switch noise blanker setting ON/OFF
Used to enter D, E, F and 3, and to switch squelch setting ON/OFF
Used to enter G, H, I and 4 as well as quick access to short cut function
Used to enter J, K, L and 5, and to switch noise reduction setting ON/OFF
Used to enter M, N, O and 6
Used to enter P, Q, R, S and 7 as well as quick access to short cut function
Used to enter T, U, V and 8, and to switch notch filter ON/OFF
Used to enter W, X, Y, Z and 9
Used to reduce the receiver volume of the handset/to shift the pointer in channel/frequency selection dialog box
Used to enter the number “0” , space and the following symbols (! “ # $ % & ‘ ( ) * + , - . / : ; < = > ? @ [ \ ] ^ - `{ } ~)/
to tune impedance between an antenna and a transceiver
Used to raise the receiver volume of the handset/to shift the pointer in channel/frequency selection dialog box
* composition and relay of the occurrence of a distress event obtained by non-DSC means