FUNAI CR320IL8 User Manual

Page 1

CR320IL8

TO RECEIVE DIGITAL SIGNAL

YOU MUST CONNECT ANTENNA

If you need additional operating assistance after reading this owner's manual or to order replacement accessories, please call WEB SITE at

http://www.funai-corp.com

TOLL FREE : 1-800-474-0045 or visit our

Page 2

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION:

TRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The important note is located on the rear of the cabinet.

TO REDUCE THE RISK OF ELEC-

IMPORTANT SAFEGUARDS

1. READ INSTRUCTIONS-All the safety and operating instructions should be read before the appliance is operated.

RETAIN INSTRUCTIONS-The safety and operating

2. instructions should be retained for future reference.

HEED WARNINGS-All warnings on the appliance and in the operating instructions should be adhered to.

FOLLOW INSTRUCTIONS-All operating and use instruc-

4. tions should be followed.

CLEANING-Unplug TV from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

EXCEPTION:A product that is meant for uninterrupted service and, that for some specific reason, such as the possibility of the loss of an authorization code for a CATV converter, is not intended to be unplugged by the user for cleaning or any other purpose, may exclude the reference to unplugging the appliance in the cleaning description otherwise required in item 5.

ATTACHMENTS-Do not use attachments not recommend-

6. ed by the TV manufacturer as they may cause hazards.

WATER AND MOISTURE-Do not use this TV near water, for example, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, and the like.

ACCESSORIES-Do not place this TV on an unstable cart,

8. stand, tripod, bracket, or table.The TV may fall, causing serious injury to someone, and serious damage to the appliance. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the TV.

Any mounting of the appliance should follow the manufacturer’s instructions and should use a mounting accessory recommended by the manufacturer. An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn.

PORTABLE CART WARNING

S3126A

AMEUBLES- Cet appareil ne doit être placé que sur un meuble (avec ou sans roulettes) recommandé par le fabricant. Si vous l’installez sur un meuble à roulettes, déplacez les deux ensembles avec précaution. Un arrêt brusque, l’utilisation d’une force excessive et des surfaces irrégulières risquent de déstabiliser l’ensemble et de le renverser.

VENTILATION-Slots and openings in the cabinet and the

9. back or bottom are provided for ventilation and to ensure reliable operation of the TV and to protect it from overheating, these openings must not be blocked or covered. The openings should never be blocked by placing the TV on a bed, sofa, rug, or other similar surface.This TV should never be placed near or over a radiator or heat register. This TV should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instructions have been adhered to.

10.

POWER SOURCES-This TV should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your appliance dealer or local power company. For TVs intended to operate from battery power, or other sources, refer to the operating instructions.

GROUNDING OR POLARIZATION-This TV is equipped

11. with a polarized alternating-current line plug(a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.

12.

POWER-CORD PROTECTION-Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance.

THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT.

THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING AND MAINTENANCE INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE.

SYMBOLE D'AVERTISSEMENT POUR

LES COMPOSANTES

APPAREIL ET MEUBLE A ROULETTES

S3126A

Page 3

EXAMPLE OF ANTENNA GROUNDING AS PER

S2898A

FIGURE A

NATIONAL ELECTRICAL CODE

GROUND CLAMP

ELECTRIC SERVICE EQUIPMENT

NEC - NATIONAL ELECTRICAL CODE POWER SERVICE GROUNDING

ELECTRODE SYSTEM (NEC ART 250, PART H)

ANTENNA LEAD IN WIRE

ANTENNA DISCHARGE UNIT (NEC SECTION 810-20)

GROUNDING CONDUCTORS (NEC SECTION 810-21)

GROUND CLAMPS

IMPORTANT SAFEGUARDS

13.OUTDOOR ANTENNA GROUNDING-If an outside anten- na or cable system is connected to the TV, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA No. 70, provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. (Fig. A)

14.

LIGHTNING-For added protection for this TV receiver during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the TV due to lightning and powerline surges.

15.

POWER LINES-An outside antenna system should not be located in the vicinity of overhead power lines or other electric light of power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.

OVERLOADING-Do not overload wall outlets and exten-

16. sion cords as this can result in a risk of fire or electric shock.

17.

OBJECT AND LIQUID ENTRY-Never push objects of any kind into this TV through openings as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the TV.

SERVICING-Do not attempt to service this TV yourself as

18. opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

19.

DAMAGE REQUIRING SERVICE-Unplug this TV from the wall outlet and refer servicing to qualified service personnel under the following conditions:

a. When the power supply cord or plug is damaged or

frayed.

b. If liquid has been spilled, or objects have fallen into the

TV. c. If the TV has been exposed to rain or water. d. If the TV does not operate normally by following the

operating instructions. Adjust only those controls that

are covered by the operating instructions, as improper

adjustment of other controls may result in damage and

will often require extensive work by a qualified techni-

cian to restore the TV to its normal operation. e. If the TV has been dropped or damaged in any way.

f. When the TV exhibits a distinct change in performance,

this indicates a need for service.

20.

REPLACEMENT PARTS-When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, injury to persons or other hazards.

SAFETY CHECK-Upon completion of any service or

21. repairs to this TV, ask the service technician to perform routine safety checks to determine that the TV is in proper operating condition.

22.

HEAT-This TV product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat.

Page 4

Model No. Serial No. Dealer Purchase from

Date of Purchase Dealer Phone No. Dealer Address

SUPPLIED ACCESSORIES

• Owner’s Manual (1EMN22170)

• If you need to replace these accessories, please refer to the PART NO. above the illustrations and call our help line mentioned on the front page.

• Depending on your antenna system, you may need different types of Combiners (Mixer) or Separator (Splitter). Contact your local electronics store for these items.

• Remote control unit (NE614UE)

• Batteries (AA x2) for remote control not included.

PRECAUTIONS

• Place your TV in a room with adequate ventilation.

• Keep your TV set away from sources of direct heat, such as heat registers or direct sunlight.

• Do not place your TV on soft surfaces, such as rugs or blankets.

• Leave enough room for air to circulate around the bottom, top and back of the set. FCC WARNING: This equipment may generate or use radio frequency energy. Changes or modifications

to this equipment may cause harmful interference unless the modifications are expressly approved in the owner’s manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made.

RADIO-TV INTERFERENCE

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

1)Reorient or relocate the receiving antenna.

2)Increase the separation between the equipment and receiver.

3)Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

4)Consult the dealer or an experienced radio/TV technician for help.

CAUTION: ATTENTION: POUR ÉVITER LES CHOCS ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE

DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU’AU FOND.

TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

A NOTE ABOUT RECYCLING: This product’s packaging materials are recyclable and can be reused. Please dispose of any materials in accordance with your local recycling regulations. Batteries should never be thrown away or incinerated but disposed of in accordance with your local regulations concerning chemical wastes.

Note to CATV system installer:

This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground should be connected to the grounding system of the building as close to the point of cable entry as practical.

The serial number of this product may be found on the back of the TV. No others have the same serial number as yours.You should record the number and other vital information here and retain this book as a permanent record of your purchase to aid identification in case of theft.

Page 5

FEATURES

• DTV/TV/CATV This TV lets you easily switch TV(NTSC) and DTV(ATSC) with the remote control. This feature enables you to simply view from conventional analog TV to Standard Definition TV, High Definition TV.You can also connect this TV to CATV if you have a CATV box.

•

Program Information Display (DTV)

You can display the title, contents and other information of the current DTV program on the screen.

Auto Preset Channel

• This TV can automatically scan and memorize the channels receivable in your residential area. This feature eliminates the need of a difficult setting procedure.

•

V-CHIP

This feature lets you set the viewing limitations to prevent your children from watching inappropriate programs.

Closed Caption Decoder

• This TV contains the built-in Closed Caption Decoder that displays text across the screen. It allows you to read the dialogue of a TV program or other information in the Closed Caption-supported programs.

•

MTS/SAP Tuner

This feature allows you to select with the remote control your desired audio language.

Auto Shut Off Function

• The power of the unit is automatically turned off when there has been no signal and no key input for more than 15 minutes.

• Sleep Timer This feature will automatically turn off the power of the unit at a specific time.

On-Screen Function Display (ENGLISH/SPANISH/FRENCH)

• This feature lets you select the language displayed in the MENU screen from ENGLISH, SPANISH or FRENCH.

• Stereo Sound Function

• Full-Function Remote Control

• PLL Frequency Synthesized Tuning

• Flat Screen Picture Tube

• S-VIDEO Input

• Front / Rear AV Input

• Component VIDEO Input

• Rear Digital Audio Output

SUPPLIED ACCESSORIES / PRECAUTIONS / FEATURES

All rights reserved. No part of this manual may be reproduced, copied, transmitted, disseminated, transcribed, downloaded or stored in any storage medium, in any form or for any purpose without the express prior written consent of Funai. Furthermore, any unauthorized commercial distribution of this manual or any revision hereto is strictly prohibited.

Information in this document is subject to change without notice. Funai reserves the right to change the content herein without the obligation to notify any person or organization of such changes.

with is a registered trademark of Funai Electric Co., Ltd and may not be used in any way without the express written consent of Funai. All other trademarks used herein remain the exclusive property of their respective owners. Nothing contained in this manual should be construed as granting, by implication or otherwise, any license or right to use any of the trademarks displayed herein. Misuse of any trademarks or any other content in this manual is strictly prohibited. Funai shall aggressively enforce its intellectual property rights to the fullest extent of the law.

Page 6

ONTENTS

DTV

IMPORTANT SAFEGUARDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

SUPPLIED ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

PREPARATION FOR USE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

CONNECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

ANTENNA/BASIC CABLE CONNECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

CONNECTION TO CABLE/SATELLITE BOX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

COMPONENT CONNECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

EXTERNAL CONNECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

USING FRONT A/V CONNECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

DIGITAL AUDIO CONNECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

INSTALLING THE BATTERIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

BATTERY PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

FUNCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

REMOTE CONTROL AND CONTROL PANEL FUNCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

WATCHING TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

INITIAL SETTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

SWITCHING ANALOG MODE/DIGITAL MODE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

CHANNEL SELECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

VOLUME ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

SWITCHING AUDIO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

SCREEN INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

SWITCHING EXTERNAL INPUT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

OPTIONAL SETTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

SLEEP TIMER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

MENU SCREEN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

PICTURE ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

CLOSED CAPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

V-CHIP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

CHANGING THE SCREEN DISPLAY MODE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27

OTHER SETTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28

AUTO PRESET CH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

CHANNEL ADD/DELETE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

LANGUAGE SELECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

D. S. T. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

TIME ZONE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

MISCELLANEOUS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

TROUBLESHOOTING GUIDE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

GLOSSARY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Back cover

SYMBOLS USED IN THIS MANUAL

The following is the description for the symbols used in this manual.

: Settings only for the analog mode

: Settings only for the digital mode

• If there is no symbol under the function heading, those are common settings for the analog mode and digital mode.

Page 7

REPARATION FOR USE

U V

CONNECTION

This section describes how to connect this TV to reception and other sources.

MAKE SURE YOU HAVE AN ANTENNA. As DTV is only available over the air, you need an antenna to receive a digital signal.

[ANTENNA / BASIC CABLE CONNECTION]

1) When connecting TV to antenna Connect the coaxial cable on your home outlet to the ANT. IN jack of this TV.

2) When connecting

TV to basic cable (without box)

Connect the coaxial cable on your home outlet to the ANT. IN jack of this TV.

VHF / UHF

antenna

Rear of this TV

Coaxial cable

(not included)

IDEO-1 INP

VIDE

S-VIDEO R

Cable TV company

Coaxial cable

(not included)

*Once connections are completed, turn on the TV and begin initial setup.

Channel scanning is necessary for the TV to memorize all available channels in your area. (Refer to “INITIAL SETTINGS” on page 13.)

NOTES:

• For your safety and to avoid damages to the unit, unplug the coaxial cable from the ANT. IN jack before moving the unit.

• If you use an antenna in order to receive analog TV, the same antenna generally will work for DTV reception. Outdoor or attic antennas will be more effective than set-top versions.

• Some cable channels cannot be viewed when the TV is connected to an aerial antenna because DTV program does not cover all cable channels. You can watch them by switching to the cable connected to CATV.

• To easily switch between antenna and cable wires, you can purchase an “Antenna Selector” commercially available.

CONTENTS / PREPARATION FOR USE

DIGI DIO OUTPUT

ANT. IN AUDIO INPUT R

Page 8

[CONNECTION TO CABLE/SATELLITE BOX]

DVD Player with the component video output jacks

To component video output jacks

To COMPONENT INPUT jacks

Rear of this TV

To audio output jacks

To AUDIO INPUT jacks

Audio cable

(not included)

Component video cable

(not included)

V DIGITALT

UDIO OUTPU

1) Connect the coaxial cable on your home outlet to the input jack of the CABLE/SATELLITE box.

2) Use the coaxial cable to connect the ANT. IN jack of this TV and the output jack of the CABLE/SATELLITE box.

*Required cables in 2) and connecting methods differ depending on the CABLE/SATELLITE box. For more

information, please contact the store where you purchased the CABLE/SATELLITE box or nearby electric appliance stores.

Satellite

dish

Cable box or Satellite box

Rear of this TV

VIDEO-1 INPU

IDEO

ANT. IN

Cable TV company

Coaxial cable

(not included)

Coaxial cable

(not included)

AUDIO

INPUT S-VIDEO R

*If you connect a cable system directly, contact the CATV installer.

[COMPONENT CONNECTION]

This is the best method to connect this TV to video devices with the component output jack, such as a DVD player, etc. It can minimize the deterioration of image quality. Use the component cable (not included) for connection.

NOTE:

This TV can only accept a 480i (interlaced) video signal.

Page 9

[EXTERNAL CONNECTION]

AUDIO

OUT

VIDEO

OUT

S-VIDEO

OUT

DVD/VCR with the S-Video output jack

To S-Video output jack

To S-VIDEO input jack

To audio output jacks

Rear of this TV

To AUDIO input jacks

Audio cable

(not included)

S-Video cable (not included)

AUDIO

OUT

VIDEO

OUT

To video output jack

VCR

To audio output jacks

Rear of this TV

To AUDIO input jacks

To VIDEO1 input jack

Audio cable

(not included)

Video cable (not included)

When using the Audio/Video cables This is the general method to connect this TV to video devices with the video or audio output jacks, such as a VCR, etc. When the audio jack of video devices is monaural, connect the audio cable to the AUDIO L jack.

PREPARATION FOR USE

When using the S-Video cab

le This is how to connect this TV to the video devices with the S-VIDEO OUT jack. You can expect better picture quality than the normal video cable connection. Use the S-Video cable (not included) for connection.

NOTE:

If you connect to the S-VIDEO jack and the VIDEO jack at the same time, S-Video connection will have priority.

Page 10

[USING FRONT A/V CONNECTION]

Rear of this TV

MD deck, DAT deck, etc.

Dolby Digital decoder

To coaxial digital audio input jack

To DIGITAL AUDIO OUT jack

Digital audio coaxial cable

(not included)

To video output jack

To audio output jacks

To VIDEO input jack

Front of this TV

To AUDIO input jacks

Audio cable

(not included)

Video cable (not included)

Video Camera Video Game

This is how to use the A/V jack in front of this TV and connect to external devices. This is useful when you use game playing devices etc. When the audio jack of external devices is monaural, connect the audio cable to the AUDIO L jack.

[DIGITAL AUDIO CONNECTION]

If you connect this TV to a digital-supported audio device, you can enjoy much more of the digital broadcasting programs with the feeling of being at a live program. Use the digital audio coaxial cable (not included) for connection.

Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol are trademarks of Dolby Laboratories.

Page 11

INSTALLING THE BATTERIES

Install two AA batteries matching the polarity indi-

[BATTERY PRECAUTIONS]

• Be sure to follow the correct polarity as indicated in the battery compartment.

Reversed batteries may cause damage to the device.

• Do not mix different types of batteries together (e.g. Alkaline and Carbon-Zinc) or old batteries with fresh

ones.

• If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury

from possible battery leakage.

• Do not try to recharge batteries not intended to be recharged; they can overheat and rupture.

Features of digital broadcasting

Digital broadcasting uses the newest broadcasting technology such as compression of audio and video signals and provides much more improved image and sound quality than analog broadcasting. For image quality, digital broadcasting have realized the High Definition Television (HDTV) that can display sharper and finer images than Standard Definition Television (SDTV) with double scanning lines, and can adopt the 16:9 wide screen format that fits more to range of human vision.

For audio quality, digital broadcasting offers the multi-channel surround broadcast to give you the feeling of being at a stadium or a theater.

In addition, digital broadcasting enables to broadcast 2 or 3 programs of Standard Definition Television (SDTV), which is the analog television format, at the same time by 1 channel.This feature has made the program planning more diversified. In addition, digital broadcasting has overcome problems experienced with analog television such as ghosting or interference with digital technology.

cated inside battery compartment of the remote control.

PREPARATION FOR USE

Minor channel of digital broadcasting

In digital broadcasting, the selected channel can have the sub channel. It is called the minor channel. Though the minor channel programs provide a little poorer image quality than the High Definition Television (HDTV) programs, they have such an advantage as it will not move back other programs even when a sport relay is extended.

Page 12

UNCTIONS

INFO

VOL VOL

POWER

CHANNEL

RECALL

AUDIO

–

/ENT

INPUT

SELECT

321

654

100

DTV/TV

MUTE

SLEEP

VIDEO

MENU VOLUME CHANNEL POWER

L - AUDIO - R

VIDEO

VOLUME CHANNEL

POWER

L - AUDIO - R

REMOTE CONTROL AND CONTROL PANEL FUNCTION

AUDIO button (p16)

• Analog mode (TV)

POWER button

To turn TV on/off

Number buttons (p15)

To select channels

-/ENT button (p15)

To confirm the command of

channel number buttons

CH KK/LLbuttons (p13)

To select channels and move up/down

through menu items

MENU button (p19)

To display on-screen menu

INPUT SELECT button (p18)

To select TV or external input mode

(to access camcorders, games, etc.)

SLEEP button (p19)

To turn the power off automatically

at preset time

To select audio mode

• Digital mode (DTV) To select audio language

DTV/TV button (p15)

To switch between digital mode (DTV) and analog mode

INFO button (p17)

• Analog mode (TV) To display channel No.

• Digital mode (DTV) To display channel information

CHANNEL RECALL button (p15)

To return to previously viewed channel

+100 button (p15)

•CATV To enter the channel number for 100 or higher channels

• Digital mode (DTV) To select the minor channel

AUDIO L/R input jacks (p10)

VIDEO input jack (p10)

MUTE button (p16)

VOL XX/YYbuttons (p13)

To adjust volume, and to change settings / to move to next screen for menu items

MENU button (p19)

To view on-screen menu

VOLUME XX/YYbuttons (p13)

To adjust volume

CHANNEL KK/LLbuttons (p13)

To select channels

POWER button

To turn TV on/off

Infrared Sensor Window

To receive the infrared rays transmitted from the remote control

Page 13

VOL VOL

CHANNEL

RECALL

–

/ENT

INPUT

SELECT

321

654

100

MUTE

SLEEP

CH K/

VOL X/

1. PLEASE CONNECT ANTENNA TO THE UNIT.

2. SET UP THE ITEMS WITH , AND BUTTONS. D.S.T. (Daylight Saving) [ON] TIME ZONE [- - -] AUTO PRESET CH (TV/DTV) AUTO PRESET CH (CATV)

1. PLEASE CONNECT ANTENNA TO THE UNIT.

2. SET UP THE ITEMS WITH , AND BUTTONS.

D.S.T. (Daylight Saving) [ON] TIME ZONE [- - -] AUTO PRESET CH (TV/DTV) AUTO PRESET CH (CATV)

SELECT LANGUAGE ENGLISH NEXT:PRESS

ESPAÑOL DESPUÉS:PRESIONE

FRANÇAIS APRÈS:PRESSEZ

ATCHING TV

INITIAL SETTINGS

This section describes the initial settings when you first turn on the power after purchase. The initial setting items are shown below.

NOTE:

Be sure that antenna or cable is connected properly before plugging the power cord.

• LANGUAGE SELECTION

You can select the menu language displayed on the screen among English, Spanish and French.

• D.S.T. (Daylight Saving Time)

You can set the air time display for digital broadcasting. When you set this function to ON, the date information adjusted for the area set by TIME ZONE will be adjusted to the one added by another 1 hour. In addition, the time difference will be adjusted as follows: 2 a.m. on first Sunday in April to 3 a.m., 1 hour ahead, and 2 a.m. on last Sunday in October to 1 a.m., 1 hour behind.

• TIME ZONE

The EPG information in digital broadcasting is adjusted based on the area set in TIME ZONE.

• AUTO PRESET CH (TV/DTV)

(When using antenna) The channels broadcasted in TV and DTV are

automatically scanned and memorized. Only the receivable channels in the area where this TV is used will be memorized.

• AUTO PRESET CH (CATV)

(When using basic cable) The channels broadcasted in CATV are automati-

cally scanned and memorized.

1 Select your language.

When you first turn on the power, the following screen is displayed.

• At initial language screen, press [CH K] for English. press

[CH L] for Spanish.

press

[VOL X] for French.

The next menu will be displayed in the selected language after you press the button.

2 Using [VOL

to [ON].

3 Using [CH

• Every time you press be switched as below.

X/Y

], set "D.S.T. (Daylight Saving)"

K/L

], select "TIME ZONE".

[VOL X/Y], the area will

FUNCTIONS / WATCHING TV

• Set your area.

NOTE:

You must set “D.S.T.” and “TIME ZONE” before presetting channels.

Page 14

4 Set the AUTO PRESET CH.

NO TV SIGNALS

AUTO PRESET CH(TV/DTV)

1. PLEASE CONNECT ANTENNA TO THE UNIT.

2. SET UP THE ITEMS WITH , AND BUTTONS.

D.S.T. (Daylight Saving) [ON]

TIME ZONE

[ALASKA] AUTO PRESET CH (TV/DTV) AUTO PRESET CH (CATV)

NOTES:

• If "D.S.T. (Daylight Saving)" and "TIME ZONE" is not set, you cannot select "AUTO PRESET CH".

• Make sure if the TV is connected to antenna or cable. When antenna is connected, select “AUTO PRESET CH (TV/DTV)” at the procedure below. When connected to CATV, select “AUTO PRESET CH (CATV)”.

Here describes the case for searching and memorizing channels for TV/DTV.

• Using

[CH K/L], select "AUTO PRESET

CH(TV/DTV)".

• When you press

[VOL X], the channel scanning

in both analog and digital modes will automatically start.

• When scanning is completed, the lowest mem-

orized channel will be displayed.

NOTES:

• The initial AUTO PRESET CH function can be executed for either TV/DTV or CATV only once. If you want to scan both TV/DTV and CATV, you need to select "CHANNEL SET" in the MENU screen to scan and memorize other channels after initial presetting is completed. (Refer to page 28.)

• You can exit the initial AUTO PRESET menu by pressing [MENU].

• When you press interrupted and the lowest memorized channel is displayed.

• If you press the scanning is not completed, initial AUTO PRESET CH screen is displayed every time you turn on the power.

• When no channel can be received by AUTO PRESET CH, "NO TV SIGNALS" is displayed on the screen.

[MENU] while scanning, the scanning is

[POWER], the power will be turned off. When

Page 15

SWITCHING ANALOG MODE / DIGITAL MODE

INFO

VOL VOL

POWER

CHANNEL

RECALL

AUDIO

–

/ENT

321

654

100

DTV/TV

DTV/ TV

INFO

VOL VOL

CHANNEL

RECALL

AUDIO

—

/ENT

INPUT

SELECT

321

654

100

MUTE

SLEEP

CHANNEL RECALL

Number

buttons

-/ENT

CH K/

+100

NOW SCANNING

CHANNEL SELECTION

You can easily switch the TV (NTSC) and DTV (ATSC) with the remote control and enjoy viewing the High Definition TV programs as well as the Standard Definition TV programs with simple operation.

Press [DTV/TV] on the remote control.

• The analog mode and digital mode switch alternately.

• When you press

[DTV/TV] in external input, the analog mode and digital mode will be switched.

NOTE:

When you switch the analog mode to the digital mode, it may

take a while until the digital channel selection is completed. The following screen is displayed while switching the mode.

You can select the channel by using either [CH K/L] or [the Number buttons].How to select the channel in each way is shown below.

1 Using [CH

K/L

• Using [CH K/L], change the channel.

• When you press

[CHANNEL RECALL], the

previously selected channel will be selected.

• Same operation is available with [CHANNEL

K/L

] on the front panel of the main unit.

2 Using [the Number buttons].

• When you select a channel from 1 to 99, press the channel number you want to view with [the Number buttons]. The selected channel will be displayed.

• When you select a channel larger than 100, press [+100] first. Then use [the Number buttons] to press the lower 2 digits.

• To search the minor channel of the major channel currently viewed in DTV, press know the minor channel while viewing the major channel with 1-digit channel number, press the major channel number and press press the minor channel number you want to view. In case the major channel number is 2 digits, press the major channel number and press the minor channel number directly. If you press

[-/ENT] after pressing the 2-digit major channel number, the smallest minor channel will be selected.

• When you press

[CHANNEL RECALL], the

previously selected channel will be selected.

[+100]. If you

[-/ENT]. Then,

WATCHING TV

In the DTV broadcasting, one channel sometimes broadcasts multiple programs depending on the air time. In this case, the main channel is called major channel and the sub channel is called minor channel.

NOTE:

Page 16

VOLUME ADJUSTMENT

VOLUME

VOL VOL

CHANNEL

RECALL

–

/ENT

INPUT

SELECT

321

654

100

MUTE

SLEEP

MUTE

VOL X/

KABC CH 95-03 Jay Jay the Jet Plane SPANISH 2/3 11:00AM- 1:00PM

KABC CH 95-03 Jay Jay the Jet Plane ENGLISH 1/3 11:00AM- 1:00PM

Audio language

DTV

INFO

POWER

AUDIO

321

654

DTV/TV

AUDIO

SWITCHING AUDIO

This section describes how to adjust the volume when viewing TV. The MUTE function, which is useful when you have a visitor or a phone call, will be also described.

Using [VOL X/Y].

• You can adjust the audio volume with [VOL X/Y].

• The volume bar is displayed at the bottom of the screen when adjusting the volume.

• Same operation is available with

X/Y

] on the front panel of the main unit.

[VOLUME

This section describes how to switch the audio in the analog mode and how to switch the audio language in the digital mode.

Switch the audio.

• Every time you press

[AUDIO], the audio will

be switched as below.

MAIN : Outputs main-audio SAP : Outputs second audio channel MONO : Outputs mono-audio

Using [MUTE].

• Press [MUTE] on the remote control to mute the sound. The colored volume bar is displayed on the screen while muting.

• To release the MUTE status, press

[MUTE]

again or press [VOL X/Y].

1 Switch the audio language.

• When you press language and the number of received languages will be displayed on the screen.

• Every time you press [AUDIO], the language will be switched.

• Languages you can switch differ depending on the receiving broadcast.

NOTE:

If you press [AUDIO] in external input, the audio will not be switched.

[AUDIO], the currently selected

Page 17

SCREEN INFORMATION

COMPONENT

VIDEO 2

CH 10

STEREO

INFO

VOL VOL

POWER

CHANNEL

RECALL

AUDIO

–

/ENT

321

654

100

DTV/TV

INFO

KABC CH 95-03 AB WORLD ENGLISH 11:00AM- 1:00PM

We bring you the latest information from around the world as quickly as possible.

Program guide

KABC CH 95-03 AB WORLD ENGLISH 11:00AM- 1:00PM

(2)

(1)

(5)

(3) (4)

DTV

You can display the currently selected channel number or other information such as the audio mode on the screen for checking.

In the analog mode, the currently selected channel number and the audio mode are displayed.

1 Display the channel number and the audio

mode.

• Press [INFO] on the remote control. The currently selected channel number and the audio mode are displayed at the top right of the screen.

In the digital mode, the detailed information for the currently selected channel such as the program guide is displayed.

1 Display the detailed information for the channel.

• Every time you press will be switched as below.

• The following information is displayed in the INFO1 mode.

(1) Channel number (2) Channel title (3) Program title (max. 2 lines displayed) (4) Audio language ("OTHER" is displayed when

the audio language cannot be acquired, or the acquired languages are other than ENGLISH, SPANISH or FRENCH.)

(5) Program air time

[INFO], the display mode

WATCHING TV

• To clear the display, press

[INFO] again.

• The following screens are displayed when connecting to external devices:

1) When using video cable for connection

2) When using component video cable for con-

nection

• The program guide added to the displayed information in the INFO1 mode is displayed in the INFO2 mode.

NOTES:

• When the program guide is displayed in more than 6 lines,

[VOL X/ Y] and scroll for reading.

use

• "No description provided" is displayed when the program

guide is not provided.

• While the information is displayed in the INFO2 mode, the

CLOSED CAPTION function is interrupted.

Page 18

SWITCHING EXTERNAL INPUT

VOL VOL

CHANNEL

RECALL

–

/ENT

INPUT

SELECT

321

654

100

MUTE

SLEEP

INPUT SELECT

S-VIDEO

COMPONENT

VIDEO 2

VIDEO 1

When you connect external devices including a video cassette recorder and home audio system, you can easily switch the input mode with the remote control.

Switch the input mode.

• When you press remote control, the input mode will be switched as below.

[INPUT SELECT] on the

• When you press [INFO], the current external

input mode will be displayed at the top right of the screen.

1) When using VIDEO-1 INPUT jack

2) When using VIDEO-2 INPUT jack

3) When using COMPONENT INPUT jacks

• To use the VIDEO-1 INPUT jack on the rear of the TV, select "VIDEO 1". (If you use the S-VIDEO jack, "S-VIDEO" is displayed.)

• To use the jack on the front of the TV, select "VIDEO 2".

• To use the COMPONENT INPUT jacks on the rear of the TV, select "COMPONENT".

4) When using S-VIDEO INPUT jack

Page 19

PTIONAL SETTINGS

DTV

PICTURE CHANNEL SET [ENG]/ESP/FRA V-CHIP SET UP CAPTION [OFF] DTV SET UP

SLEEP 16

SLEEP 0

VOL VOL

CHANNEL

RECALL

–

/ENT

INPUT

SELECT

321

654

100

MUTE

SLEEP

SLEEP TIMER

The SLEEP TIMER function will automatically turn off the power of the unit at a preset time.

Use SLEEP TIMER.

• Press

[SLEEP] on the remote control.

• The setting display for SLEEP TIMER is shown in the screen.

2 Set the timer.

• Every time you press increases by 10 minutes.

• You can set the timer up to 90 minutes.

• After setting, you can check the remained time per 1 minute by pressing

[SLEEP], the time

[SLEEP].

MENU SCREEN

This section describes the overview of the menu screen displayed when you press more details, see the reference page for each item.

The menu screen consists of the function setting items below.

• PICTURE

You can adjust the picture quality (BRIGHT, CONTRAST, COLOR, TINT, SHARPNESS).

(Refer to "PICTURE ADJUSTMENT" on page 20.)

• CHANNEL SET

You can automatically scan the receivable channels and add or delete the channel as necessary.

(Refer to "AUTO PRESET CH" on page 28.)

• ENG/ESP/FRA

You can change the language (ENGLISH, SPANISH, FRENCH) displayed in the menu screen.

(Refer to "LANGUAGE SELECTION" on page 31.)

• V-CHIP SET UP

You can set the viewing limitations. (Refer to "V-CHIP" on page 24.)

• CAPTION

You can change the display format for CLOSED CAPTION, which displays the dialogue of a TV program or other information across the screen.

(Refer to "CLOSED CAPTION" on page 21.)

[MENU].For

WATCHING TV / OPTIONAL SETTINGS

NOTES:

• When you disconnect the unit from the AC outlet or when a

power failure occurs, the sleep timer setting will be canceled.

• To cancel the sleep timer, press

"SLEEP 0" is displayed.

• The Sleep Timer setting display will automatically disappear

after 10 seconds.

[SLEEP] repeatedly until

• DTV SET UP

You can set the screen display or CAPTION in the DTV mode.

(Refer to "CHANGING THE SCREEN DISPLAY MODE" on page 27.)

NOTES:

• "DTV SET UP" can be displayed only in the DTV mode.

• To move to the normal screen, press

[MENU].

Page 20

PICTURE ADJUSTMENT

BRIGHT

[-] [+]

PICTURE CHANNEL SET [ENG]/ESP/FRA V-CHIP SET UP CAPTION [OFF] DTV SET UP

VOL VOL

CHANNEL

RECALL

–

/ENT

INPUT

SELECT

321

654

100

MUTE

SLEEP

CH K/

VOL X/

You can adjust the brightness, contrast, color, tint and sharpness of the picture.

3 Adjust the picture quality.

• Using

[CH K/L], select the picture quality item

you want to adjust.

1 Display the menu screen.

• Press

Select "PICTURE".

• Using

• The adjustment bar for picture quality item is

[MENU].

The following menu screen is displayed.

[CH K/L], select "PICTURE" and press

[VOL X] to confirm.

displayed in the screen.

• Using

[VOL X/Y], adjust the picture quality.

BRIGHT

:To increase brightness

:To decrease brightness

CONTRAST

:To increase contrast

:To decrease contrast

COLOR

:To brilliant

:To pale

TINT

:To green

:To purple

SHARPNESS

:To clear

:To soft

NOTES:

• The display will disappear automatically after 10 seconds unless you press a button.

• Magnetism from nearby appliances and speakers might affect the color of the TV picture. If this happens, press [POWER] to turn off the TV and turn it on again after about 30 minutes.

Page 21

CLOSED CAPTION

PICTURE CHANNEL SET [ENG]/ESP/FRA V-CHIP SET UP CAPTION [OFF] DTV SET UP

VOL VOL

CHANNEL

RECALL

–

/ENT

INPUT

SELECT

100

MUTE

SLEEP

CH K/

VOL X/

PICTURE CHANNEL SET [ENG]/ESP/FRA V-CHIP SET UP CAPTION [OFF] DTV SET UP

DTV

You can view specially labeled (cc) TV programs, movies, news and prerecorded tapes, etc. with either a dialogue caption or text display added to the program.

You can also change the font size and font style of the caption in the digital broadcasting.

1 Display the menu screen.

• Press

Select "CAPTION".

• Using

[MENU].

The following menu screen is displayed.

[CH K/L], select "CAPTION".

• CAPTION2 (C2) Displays foreign language closed captions (for-

eign language words showing what a character is saying).

• There are three display modes according to programs:

Paint-on mode: Displays input characters on the

screen immediately.

Pop-on mode : Once characters are stored in

memory, they are displayed all at once.

Roll-up mode : Displays the characters continu-

ously by scrolling (max. 4 lines).

[TEXT MODE (T1, T2)]

• TEXT1 (T1) and TEXT2 (T2) display halfscreen text by scrolling (such as a channel guide, schedule or announcement).

4 To exit the menu, press [MENU].

NOTES:

• If the closed caption is not broadcasted, nothing is displayed.

• When your TV receives a special effects playback signal

(i.e., Search, Slow and Still) from a VCR’s video output channel (CH3 or CH4), the TV may not display the correct caption or text.

• Captions and texts may not match the TV voice exactly.

• Interference may cause the closed caption system not to

function properly.

• The caption or text characters will not be displayed while the

menu display or functions display is shown.

• If a black box appears on the screen, this means that the

TV is set to TEXT mode. To clear screen, select CAPTION "C1", "C2" or "OFF".

OPTIONAL SETTINGS

3 Switch the CAPTION mode.

• When you press switched as below.

[CAPTION MODE (C1, C2)]

• CAPTION1 (C1)

Displays standard closed captions (what a character is saying).

[VOL X/Y], CAPTION will be

1 Display the menu screen.

• Press

[MENU].

The following menu screen is displayed.

Page 22

2 Select "DTV SET UP".

CAPTION SERVICE [OFF] USER SETTING [OFF] CAPTION SIZE [MIDDLE] FONT STYLE [STYLE1/8] CHARACTER EDGE [NONE] FORE OPACITY [SOLID] FORE COLOR [WHITE] BACK OPACITY [SOLID] BACK COLOR [BLACK]

DTV DISPLAY [LETTERBOX] DTVCC D.S.T.[Daylight Saving] [ON] TIME ZONE [ALASKA]

PICTURE CHANNEL SET [ENG]/ESP/FRA V-CHIP SET UP CAPTION [OFF] DTV SET UP

CAPTION SERVICE [SERVICE1/6] USER SETTING [ON] CAPTION SIZE [MIDDLE] FONT STYLE [STYLE1/8] CHARACTER EDGE [NONE] FORE OPACITY [SOLID] FORE COLOR [WHITE] BACK OPACITY [SOLID] BACK COLOR [BLACK]

CAPTION SERVICE [SERVICE1/6] USER SETTING [OFF] CAPTION SIZE [MIDDLE] FONT STYLE [STYLE1/8] CHARACTER EDGE [NONE] FORE OPACITY [SOLID] FORE COLOR [WHITE] BACK OPACITY [SOLID] BACK COLOR [BLACK]

• Using

[CH K/L], select "DTV SET UP".

NOTE:

CAPTION SERVICE you can switch differs depending on the

broadcast description.

5 Use "USER SETTING".

• The "USER SETTING" function lets you change the caption size and font style.

• Using

[CH K/L], select "USER SETTING".

• Press

[VOL X].

The following screen is displayed.

Select "DTVCC".

• Using

• Press

[CH K/L], select "DTVCC".

[VOL X].

The following screen is displayed.

• Press

[VOL X] and set "USER SETTING" to

"ON".

Set each item.

• When "USER SETTING" is set to "ON", you can set the following items.

• Using

[CH K/L], select the item you want to

set.

• You can switch the setting for each item with [VOL X/Y].

• The setting description for each item is shown below.

4 Select "CAPTION SERVICE".

• When you press CAPTION as below. Select CAPTION SERVICE you want to use.

[VOL X/Y], you can switch

[CAPTION SIZE]

Te xt size of the displayed caption can be switched as below.

Page 23

[FONT STYLE]

Font style of the displayed caption can be switched as below.

[FORE COLOR]

Te xt color of the displayed caption can be switched as below.

[CHARACTER EDGE]

Te xt edging of the displayed caption can be switched as below.

[FORE OPACITY]

Te xt opacity of the displayed caption can be switched as below.

OPTIONAL SETTINGS

[BACK OPACITY]

Background opacity of the displayed caption can be switched as below.

[BACK COLOR]

Background color of the displayed caption can be switched as below.

Page 24

V-CHIP

ACCESS CODE

_ _ _ _

PICTURE CHANNEL SET [ENG]/ESP/FRA V-CHIP SET UP CAPTION [OFF] DTV SET UP

INFO

VOL VOL

CHANNEL

RECALL

AUDIO

–

/ENT

INPUT

SELECT

321

654

100

MUTE

SLEEP

Number

buttons

CH K/

VOL

TV-Y [VIEW] TV-Y7 ( ) [VIEW] TV-G [VIEW] TV-PG ( ) [VIEW] TV-14 ( ) [VIEW] TV-MA ( ) [VIEW]

TV RATING MPAA RATING CHANGE CODE

You can set the viewing limitations to prevent your children from watching inappropriate programs including disagreeable expression and description. The viewing limitations set for the program can be released by entering the access code.

3 Enter the access code.

[the Number buttons] and enter the

• Use 4-digit number.

• When you have not set up your access code, enter 0000.

• When the access code is correct, the following "V-CHIP SET UP" screen is displayed.

Display the menu screen.

• Press

[MENU].

The following menu screen is displayed.

Select "V-CHIP SET UP".

• Using

[CH K/L], select "V-CHIP SET UP".

TV RATING MPAA RATING CHANGE CODE

A B C

See the following description for setting each item.

TV RATING

4 Display the "TV RATING" screen.

• Using

Set "TV RATING".

• Using

[CH K/L], select "TV RATING".

Press

[VOL X].

[CH K/L], select the rating.

• Press

[VOL X].

The access code entry screen is displayed.

• TV-Y : Appropriate for all children

• TV-Y7 : Appropriate for children 7 and older

• TV-G : General Audience

• TV-PG : Parental Guidance suggested

• TV-14 :

Unsuitable for children under 14

• TV-MA : Mature audience only

Page 25

6 Set "BLOCK" or "VIEW".

TV RATING MPAA RATING CHANGE CODE

TV-PG [BLOCK]

D [BLOCK] L [BLOCK] S [BLOCK] V [BLOCK]

TV-Y [VIEW] TV-Y7 ( ) [VIEW] TV-G [VIEW] TV-PG ( ) [VIEW] TV-14 ( ) [VIEW] TV-MA ( ) [VIEW]

Sub categories

TV-Y [VIEW] TV-Y7 ( ) [VIEW] TV-G [BLOCK] TV-PG (DLSV) [BLOCK] TV-14 (DLSV) [BLOCK] TV-MA ( LSV) [BLOCK]

G [VIEW] PG [VIEW] PG-13 [VIEW] R [BLOCK] NC-17 [BLOCK] X [BLOCK]

G [VIEW] PG [VIEW] PG-13 [VIEW] R [VIEW] NC-17 [VIEW] X [VIEW]

• Press

[VOL X] and set to "BLOCK" or "VIEW"

for the rating without sub categories.

5 Set "MPAA RATING".

• Using the

[CH K/L], select the rating.

• For the rating with sub categories, they are displayed by pressing Press

[CH K/L] and select the rating. Then press

[VOL X] twice.

[VOL X] and set to "BLOCK" or "VIEW".

• TV-Y7 FV : Fantasy Violence

• TV-PG / TV-14 / TV-MA : D : Suggestive Dialogue

(TV-PG, TV-14 only) L : Coarse Language S : Sexual Situation

V : Violence

NOTES:

• You cannot access the setup menu when the "PROTECTED PROGRAM by ..." message appears.You need to move to an unblocked channel to access the setup menu.

• When you select a rating and set it to "BLOCK", the higher ratings will be blocked automatically. The lower ratings will be available for viewing.

• When you set TV-MA to "VIEW", all ratings turn to "VIEW" automatically .

• G : General Audience

• PG : Parental Guidance suggested

• PG-13 : Unsuitable for children under 13

• R : Restricted; under 17 requires accompanying parent or adult guardian

• NC-17 : No one under 17 admitted

• X : Mature audience only

6 Set "BLOCK" or "VIEW".

• Press

[VOL X] and set to "BLOCK" or "VIEW".

7 To exit the menu, press [MENU].

NOTES:

• You cannot access the setup menu when the "PROTECTED PROGRAM by ..." message appears.You need to move to an unblocked channel to access the setup menu.

• When you select a rating and set it to "BLOCK", the higher ratings will be blocked automatically. The lower ratings will be available for viewing.

• When you set "X" to [VIEW], all ratings turn to [VIEW] automatically .

OPTIONAL SETTINGS

To exit the menu, press [MENU].

MPAA RATING

4 Display the "MPAA RATING" screen.

• Using

• Press

[CH K/L], select "MPAA RATING".

[VOL X].

Page 26

NEW CODE

_ _ _ _

CONFIRM CODE

_ _ _ _

TV RATING MPAA RATING CHANGE CODE

CHANGE CODE

4 Display the "CHANGE CODE" screen.

• Using

[CH K/L], select "CHANGE CODE".

• Press

[VOL X].

5 Change the access code.

[the Number buttons] on the remote con-

• Use trol and enter the NEW CODE (4-digit).

• Enter code again in CONFIRM CODE space.

To exit the menu, press [MENU].

NOTES:

• Make sure to enter the exact same new code in the

"CONFIRM CODE" space as one in the "NEW CODE" space. If they are different, the "NEW CODE" space is cleared for reentering.

• Your personal access code will be erased and return to the

default (0000) when a power failure occurs or when you turn off the power using a wall switch. If you forget the code, unplug the power cord for 10 seconds to restore the access code to 0000.

Page 27

CHANGING THE SCREEN DISPLAY MODE

DTV DISPLAY [LETTERBOX] DTVCC D.S.T.(Daylight Saving) [ON] TIME ZONE [ALASKA]

PICTURE CHANNEL SET [ENG]/ESP/FRA V-CHIP SET UP CAPTION [OFF] DTV SET UP

DTV

VOL VOL

CHANNEL

RECALL

–

/ENT

INPUT

SELECT

321

654

100

MUTE

SLEEP

CH K/

VOL X/

D10-0

ZOOMLETTERBOX

D10-0

2 types of display modes can be selected in the digital mode.

You can select your favorite display mode and enjoy the program.

Display the menu screen.

• Press

[MENU].

The following menu screen is displayed.

3 Select the display mode.

• Every time you press "LETTERBOX" and "ZOOM" will be switched alternately.

[LETTERBOX]

Display the digital-supported program in fullscreen.

Black borders will spread in the upper and lower screen.

[ZOOM]

Enlarge and display the center area of the digitalsupported program.

The right and left side of image will be cut off.

[VOL X/Y],

4 To exit the menu, press [MENU].

NOTE:

You may not switch the display mode depending on the pro-

gram.

OPTIONAL SETTINGS

Select "DTV SET UP".

• Using

[CH K/L], select "DTV SET UP".

• When you press be displayed as below.

[VOL X], the menu screen will

Page 28

AUTO PRESET CH(CATV)

ADD/DELETE AUTO PRESET CH(TV) AUTO PRESET CH(CATV) AUTO PRESET CH(TV/DTV) AUTO PRESET CH(CATV) ! CATV takes approx. 50min.

AUTO PRESET CH(TV)

ADD/DELETE AUTO PRESET CH(TV) AUTO PRESET CH(CATV) AUTO PRESET CH(TV/DTV) AUTO PRESET CH(CATV) ! CATV takes approx. 50min.

PICTURE CHANNEL SET [ENG]/ESP/FRA V-CHIP SET UP CAPTION [OFF]

INFO

VOL VOL

POWER

CHANNEL

RECALL

AUDIO

–

/ENT

INPUT

SELECT

321

654

100

DTV/TV

MUTE

SLEEP

VOL

DTV/TV

CH K/

THER SETTINGS

AUTO PRESET CH

If you switch wires (e.g. between antenna and CATV) or if you move the TV to a different area after the initial setting, or if you need to add the DTV channel you deleted, you will need to perform AUTO PRESET CH again. This function lets you easily select the receivable channels with and the TV memorizes them even if you switch wires.

NOTE:

• Make sure if the TV is connected to antenna or cable. When aerial antenna is connected, select “AUTO PRESET CH (TV)” or “ AUTO PRESET CH (TV/DTV)” at step 4. When connected to CATV, select “AUTO PRESET CH (CATV)”.

[CH K/L]

For TV channels

• Using [CH K/L], select "AUTO PRESET CH(TV)".

• Press

[VOL X].

Scanning and memorizing the channels automatically starts.

• When the scanning and memorizing are completed, the lowest memorized channel in the analog broadcasting will be displayed.

4 For CATV channels

• Using

[CH K/L], select "AUTO PRESET

CH(CATV)".

When scanning TV or CATV

1 Select analog mode by pressing [DTV/TV].

Display the menu screen.

• Press

[MENU].

The following menu screen is displayed.

3 Select "CHANNEL SET".

[CH K/L], select "CHANNEL SET".

[VOL X].

• Using

• Press

[VOL X].

Scanning and memorizing the channels automatically starts.

• When the scanning and memorizing are completed, the smallest memorized channel in the CATV will be displayed.

Page 29

AUTO PRESET CH(TV/DTV)

ADD/DELETE(DTV) AUTO PRESET CH(DTV) AUTO PRESET CH(TV/DTV) AUTO PRESET CH(CATV) ! CATV takes approx. 50min.

PICTURE CHANNEL SET [ENG]/ESP/FRA V-CHIP SET UP CAPTION [OFF] DTV SET UP

DTV TV

When scanning DTV

AUTO PRESET CH(DTV)

D28

ADD/DELETE(DTV) AUTO PRESET CH(DTV) AUTO PRESET CH(TV/DTV) AUTO PRESET CH(CATV) ! CATV takes approx. 50min.

PICTURE CHANNEL SET [ENG]/ESP/FRA V-CHIP SET UP CAPTION [OFF] DTV SET UP

DTV

NO TV SIGNALS

Select digital mode by pressing [DTV/TV].

When scanning both TV and DTV at the same time

* You can access this menu from both modes

(analog / digital).

2 Display the menu screen.

• Press

[MENU].

The following menu screen is displayed.

3 Select "CHANNEL SET".

• Using

• Press

4 Using [CH

CH(DTV)".

[CH K/L], select "CHANNEL SET".

[VOL X].

K/L

], select "AUTO PRESET

1 Display the menu screen and select

"CHANNEL SET".

• Press

2 Using [CH

CH(TV/DTV)".

• Press

[MENU] and select "CHANNEL SET"

using

[CH K/L].

[VOL X].

K/L

], select "AUTO PRESET

[VOL X].

Scanning and memorizing the channels automatically starts.

OTHER SETTINGS

• Press

[VOL X].

Scanning and memorizing the channels automatically starts.

• When the scanning and memorizing are completed, the smallest memorized channel in the digital broadcasting will be displayed.

• When the scanning and memorizing are completed, the memorized smallest channel in the analog broadcasting will be displayed. If no analog channel is memorized, the smallest memorized channel in the digital broadcasting will be displayed.

NOTES:

• If you press [POWER] or [MENU] while setting AUTO PRE-

SET CH, AUTO PRESET CH setting will be canceled.

• If there is no TV signal input, "NO TV SIGNALS" will appear

on the display after the completion of channel scanning.

Page 30

CHANNEL ADD/DELETE

ADD/DELETE AUTO PRESET CH(TV) AUTO PRESET CH(CATV) AUTO PRESET CH(TV/DTV) AUTO PRESET CH(CATV) ! CATV takes approx. 50min.

PICTURE CHANNEL SET [ENG]/ESP/FRA V-CHIP SET UP CAPTION [OFF]

INFO

VOL VOL

POWER

CHANNEL

RECALL

AUDIO

—

/ENT

INPUT

SELECT

321

654

100

DTV/TV

MUTE

SLEEP

CH K/

VOL X/

DTV/TV

Number

buttons

PICTURE CHANNEL SET [ENG]/ESP/FRA V-CHIP SET UP CAPTION [OFF] DTV SET UP

DTV

ADD/DELETE:TV

ADD/DELETE AUTO PRESET CH(TV) AUTO PRESET CH(CATV) AUTO PRESET CH(TV/DTV) AUTO PRESET CH(CATV) ! CATV takes approx. 50min.

The CHANNEL ADD/DELETE function lets you add the channel that was not added by the AUTO PRESET CH function due to the bad reception status at the initial setting. You can also delete the unnecessary channels.

4 Select "ADD/DELETE".

• Using

[CH K/L], select "ADD/DELETE".

1 Select analog mode by pressing [DTV/TV].

2 Display the menu screen.

• Press

Select "CHANNEL SET".

• Using

[MENU].

The following menu screen is displayed.

[CH K/L], select "CHANNEL SET".

• Press

Select the channel you want to add or delete.

• Using

[VOL X].

[CH K/L] or [the Number buttons],

select the channel.

• Select "ADD" or "DELETE" with

[VOL X/Y].

NOTE:

• Color of channel number displayed at the right top of the screen;

-Blue/Green: The selected channel will be added.

-Pink/Red: The selected channel will be deleted.

6 To exit the menu, press [MENU].

Select digital mode by pressing [DTV/TV].

2 Display the menu screen.

• Press

[MENU].

The following menu screen is displayed.

• Press

[VOL X].

The following CHANNEL SET screen is displayed.

3 Select "CHANNEL SET".

• Using

• Press

[CH K/L], select "CHANNEL SET".

[VOL X].

Page 31

4 Select "ADD/DELETE(DTV)".

D12

ADD/DELETE:DTV

ADD/DELETE(DTV) AUTO PRESET CH(DTV) AUTO PRESET CH(TV/DTV) AUTO PRESET CH(CATV) ! CATV takes approx. 50min.

PICTURE CHANNEL SET [ENG]/ESP/FRA V-CHIP SET UP CAPTION [OFF] DTV SET UP

VOL VOL

CHANNEL

RECALL

–

/ENT

INPUT

SELECT

654

100

MUTE

SLEEP

CH K/

VOL X/

• Using

[CH K/L], select "ADD/DELETE(DTV)".

LANGUAGE SELECTION

You can change the language used on the menu screen. ENGLISH, SPANISH or FRENCH can be selected.

How to change the language in the menu screen shown below.

• Press

[VOL X].

5 Select the channel you want to add or delete.

• Using

• Select "ADD" or "DELETE" with

NOTE:

• Color of channel number displayed at the right top of

[CH K/L] or [the Number buttons],

select the channel.

[VOL X/Y].

the screen;

-Blue/Green: The selected channel will be added.

-Pink/Red: The selected channel will be deleted.

6 To exit the menu, press [MENU].

NOTES:

• The menu will disappear automatically after about 10 seconds.

• In the digital mode (DTV), you can add or delete channels only for Major channel.

• Once you delete a DTV channel, you cannot add the channel again without performing AUTO PRESET CH again. (Refer to "AUTO PRESET CH" on page 28.)

Display the menu screen.

• Press

[MENU].

The following menu screen is displayed.

2 Select "[ENG]/ESP/FRA".

• Using

• Every time you press

[CH K/L], select "[ENG]/ESP/FRA".

[VOL X/Y], the language

will be switched as below. Select the language.

OTHER SETTINGS

To exit the menu, press [MENU].

Page 32

D.S.T.

DTV DISPLAY [LETTERBOX] DTVCC D.S.T.(Daylight Saving) [OFF] TIME ZONE [ALASKA]

PICTURE CHANNEL SET [ENG]/ESP/FRA V-CHIP SET UP CAPTION [OFF] DTV SET UP

DTV

VOL VOL

CHANNEL

RECALL

–

/ENT

INPUT

SELECT

321

654

100

MUTE

SLEEP

CH K/

VOL X/

DTV DISPLAY [LETTERBOX] DTVCC D.S.T.(Daylight Saving) [ON] TIME ZONE [ALASKA]

DTV DISPLAY [LETTERBOX] DTVCC D.S.T.(Daylight Saving) [OFF] TIME ZONE [ALASKA]

After the initial setting you set when you first turned on the power, you can set the D.S.T. (Daylight Saving Time) again.When you set this function to ON, the clock will automatically move forward one hour at 2:00 a.m. on the first Sunday in April and move back one hour at 2:00 a.m. on the last Sunday in October.

Select "D.S.T. (Daylight Saving)".

• Using [CH K/L], select "D.S.T. (Daylight Saving)".

4 Set "D.S.T. (Daylight Saving)".

• Using

To exit the menu, press [MENU].

[VOL X/Y], set to "ON" or "OFF".

1 Display the menu screen.

• Press

Select "DTV SET UP".

• Using

• When you press

[MENU].

The following menu screen is displayed.

[CH K/L], select "DTV SET UP".

[VOL X], the following menu

screen will be displayed.

NOTE:

When you set D.S.T. to "OFF", the date and time information

adjusted for the area set by "TIME ZONE" is displayed.

Page 33

DTV DISPLAY [LETTERBOX] DTVCC D.S.T.(Daylight Saving) [ON] TIME ZONE [ALASKA]

TIME ZONE

DTV DISPLAY [LETTERBOX] DTVCC D.S.T.(Daylight Saving) [ON] TIME ZONE [ALASKA]

PICTURE CHANNEL SET [ENG]/ESP/FRA V-CHIP SET UP CAPTION [OFF] DTV SET UP

VOL VOL

CHANNEL

RECALL

–

/ENT

INPUT

SELECT

321

654

100

MUTE

SLEEP

CH K/

VOL X/

If you move the TV to a different area after the initial setting you set when you first turned on the power, you can set the area again.

Display the menu screen.

• Press

[MENU].

The following menu screen is displayed.

3 Select "TIME ZONE".

• Using

[CH K/L], select "TIME ZONE".

4 Select your "TIME ZONE".

• When you use be switched as below.

[VOL X/Y], the TIME ZONE will

OTHER SETTINGS

2 Select "DTV SET UP".

[CH K/L], select "DTV SET UP".

screen is displayed.

• Using

• When you press

[VOL X], the following menu

• Based on the world standard time information acquired from digital broadcasting, the time difference will be adjusted as below.

ALASKA -9 hours

HAWAII -10 hours

PA CIFIC -8 hours

MOUNTAIN -7 hours

CENTRAL -6 hours

EASTERN -5 hours

ATLANTIC -4 hours

To exit the menu, press [MENU].

Page 34

ISCELLANEOUS

TROUBLESHOOTING GUIDE

Before calling for service, check the following chart again.

Symptom Remedy

No power

No picture or sound

No color

Sound OK, picture poor

Picture distorted

• Be sure the Power cord is connected to outlet.

• If a power failure occurs, unplug the power cord for 30 minutes to allow the unit to reset itself.

• Check if the power is on.

• Check the outlet connection.

• Check the antenna or cable connection to the main unit.

• When the outside antenna is used, check the wire condition and connection.

• Try to view other channels. It may be the problem on the broadcasting station.

• Turn off the power and wait for about 1 minute, then turn it on again.

• Check the antenna or cable connection to the main unit.

• When the outside antenna is used, check the wire condition and connection.

• Try to view other channels. It may be the problem on the broadcasting station.

• Adjust the COLOR in the MENU screen.

• Check the antenna or cable connection to the main unit.

• When the outside antenna is used, check the wire condition and connection.

• Electric waves may be interfered due to the electric appliances, etc. nearby.

• Adjust CONTRAST and BRIGHT in the MENU screen.

• Try to view other channels. It may be the problem on the broadcasting station.

• When the outside antenna is used, check the wire condition and connection.

• Try to view other channels. It may be the problem on the broadcasting station.

Weak picture

Lines or streaks in picture

Picture blurred

Ghosts in picture

• Check the antenna or cable connection to the main unit.

• When the outside antenna is used, check the wire condition and connection.

• Adjust CONTRAST and BRIGHT in the MENU screen.

• Try to view other channels. It may be the problem on the broadcasting station.

• When the outside antenna is used, check the wire condition and connection.

• Electric waves may be interfered due to the electric appliances, etc. nearby.

• Try to view other channels. It may be the problem on the broadcasting station.

• When the outside antenna is used, check the wire condition and connection.

• Try to view other channels. It may be the problem on the broadcasting station.

• Check the antenna or cable connection to the main unit.

• When the outside antenna is used, check the wire condition and connection.

• Electric waves may be interfered due to the electric appliances, etc. nearby.

• Try to view other channels. It may be the problem on the broadcasting station.

Page 35

Symptom Remedy

Bars on screen

Picture rolls vertically

Different color marks on screen

Poor reception on some channels

Picture OK, sound poor

Remote control doesn’t work

• When the outside antenna is used, check the wire condition and connection.

• Electric waves may be interfered due to the electric appliances, etc. nearby.

• When the outside antenna is used, check the wire condition and connection.

• Electric waves may be interfered due to the electric appliances, etc. nearby.

• Try to view other channels. It may be the problem on the broadcasting station.

• Move the TV apart from electric appliances nearby. Turn off the power and wait for about 30 minutes, then turn it on again.

• Try to view other channels. It may be the problem on the broadcasting station.

• Check the antenna or cable connection to the main unit.

• When the outside antenna is used, check the wire condition and connection.

• Electric waves may be interfered due to the electric appliances, etc. nearby.

• Try to view other channels. It may be the problem on the broadcasting station.

• Electric waves may be interfered due to the electric appliances, etc. nearby.

• Try to view other channels. It may be the problem on the broadcasting station.

• Check the antenna or cable connection to the main unit.

• Check the battery life of the remote control.

• Check if there is an obstacle between the sensor and the remote control.

• Test the signal output. If OK, then possible remote sensor trouble. (Refer to “IR SIGNAL CHECK” on page 36.)

MISCELLANEOUS

Problems on Closed Caption

Misspelled captions are displayed.

Captions are not entirely displayed, or captions are delayed behind the dialogue.

Captions are displayed as a white box. No caption is displayed in the Closed Caption-supported program.

No caption is displayed when playing the videotape containing captions.

Black box is displayed in the screen.

• Closed captioning production companies may broadcast programs without correcting the misspelling in a live broadcast.

Captions that are delayed a few seconds behind the actual

• dialogue are common for live broadcasts. Most captioning production companies can display a dialogue to a maximum of 220 words per minute. If a dialogue exceeds that rate, selective editing is used to insure that the captions remain up-to-date with the current TV screen dialogue.

• When electric waves are interfered due to buildings, weather conditions etc., incomplete captions may be displayed.

• Broadcasting station may shorten the program to insert the advertisement. The closed caption decoder cannot read the information of the shortened program.

• The videotape may be illegally copied, or the caption signal may fail to be read while copying.

• “TEXT” mode is selected for caption. Select “C1”, “C2” or “OFF”.

Page 36

GLOSSARY

ATSC

Acronym that stands for Advanced Television Systems Committee and the name of the digital broadcasting standards.

High Definition TV (HDTV)

Ultimate digital format that produces high resolution and high picture quality.

Letterbox

Letterbox refers to the format displaying a wide-screen picture on a standard 4:3 aspect ratio television screen with black bars above and below. It is used to maintain the aspect ratio of the original source such as a motion picture (16:9 or wider).

NTSC

Acronym that stands for National Television Systems Committee and the name of the current analog broadcasting standards.

MAINTENANCE

CABINET CLEANING

• Wipe the front panel and other exterior surfaces of the TV with a soft cloth immersed in lukewarm water and wrung dry.

• Never use a solvent or alcohol. Do not spray insecticide liquid near the TV. Such chemicals may cause damage and discoloration to the exposed surfaces.

PICTURE TUBE CLEANING

Wipe the picture tube of the TV with a soft cloth. Before cleaning the picture tube, disconnect the power cord.

SERVICING

Should your unit become inoperative, do not try to correct the problem by yourself. There are no userserviceable parts inside. Turn off, unplug the power cord and please call our help line mentioned on the front page, to locate an Authorized Service Center.

DEGAUSSING

A degaussing circuit in this unit clears up color errors on the TV screen. Color errors occur when there is any excess magnetism close to the unit. This circuit is designed to operate once when the unit is first plugged in.

If you see minor color errors on the screen, unplug the unit for approximately 30 minutes.

SAP (Secondary Audio Program)

Second-audio channel delivered separately from main-audio channel. This audio channel is used as an alternate in bilingual broadcasting.

Standard Definition TV (SDTV)

Standard digital format that is similar to the NTSC picture quality.

S-Video output

It delivers independently each signal of color(C) and luminance (Y) to TV as video signals, so that higher-quality picture will be gained.

When you plug in the unit again, the degaussing circuit will operate to clear errors. Take this step any time the TV screen is accidentally magnetized or when you move the unit.

IR SIGNAL CHECK

If the remote control doesn’t work properly, you can test if the remote control sends out the infrared signal with AM radio or a digital camera (including builtin camera of cellular phone). It will help to define the cause of malfunction.

•

With an AM radio: Tune an AM radio to a station with no broadcasting. Press a button on remote control toward the radio. Sound will be fluttering when you press any key and the radio receives the signal. This means the remote control unit is working.

•

With a digital camera (including built-in camera of cellular phone): Direct a digital camera to remote control, press and hold a button on remote control. If infrared light appears through digital camera, the remote control is working.

Page 37

PECIFICATIONS

GENERAL SPECIFICATIONS

Television system: ATSC

NTSC-M

TV Standard Closed Caption System: §15.119/FCC (Analog CC)

§15.122/FCC (Digital CC)

Channel coverage

VHF: 2 ~ 13 UHF: 14 ~ 69 DTV: 2 ~ 69 CATV: 2 ~ 13, A ~ W,

W+1 ~ W+84,

A-5 ~ A-1, 5A Tuning System: Channel frequency

synthesized tuning system Channel access: Direct access keyboard,

programmable

scan and up/down Te r minals

Antenna input: VHF/UHF/DTV/CATV

75 ohm unbalanced

(F-type)

S-Video input: Mini DIN 4-pin jack Video input: RCA connector x 2

(1 x Front / 1 x Rear)

Audio input: RCA connector x 4

(2 (L/R) x Front / 2 (L/R) x Rear)

Coaxial digital audio output:

One pin jack, 500mVpp (75 ohm)

Component Video/Audio input

One pin jack (Y) / 1Vpp (75 ohm) Tw o pin jacks (Cb/Cr) / 700mVpp (75 ohm)

RCA connector x 2 (L/R) Stereo Sound System 2 speakers

ELECTRICAL SPECIFICATIONS

Sound output: 2W, 8 ohm x 2

OTHER SPECIFICATIONS

Remote control: Digital encoded

infrared light system Operating temperature: 5°C to 40°C

(41°F to 104°F) Power requirements: AC120V, 60Hz Power consumption (Maximum): 140W Picture tube: 32" Dimensions: H : 26.2" (665mm)

W: 33.4" (849mm)

D:21.3" (540mm) Weight: 112.6 lbs. (51.0kg)

MISCELLANEOUS / SPECIFICATIONS

• Designs and specifications are subject to change without notice and without our legal obligation.

• If there is a discrepancy between languages, the default language will be English.

Page 38

LIMITED WARRANTY

FUNAI CORP. will repair this product, free of charge in the USA in the event of defect in materials or workmanship as follows:

DURATION:

PARTS: FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year from the

date of original retail purchase. Two (2) years for Picture Tube. Certain parts are excluded from this warranty.

LABOR: FUNAI CORP. will provide the labor without charge for a period of ninety (90) days from the date of

original retail purchase.

LIMITS AND EXCLUSIONS:

THIS WARRANTY IS EXTENDED ONLY TO THE ORIGINAL RETAIL PURCHASER. A PURCHASE RECEIPT OR OTHER PROOF OF ORIGINAL RETAIL PURCHASE WILL BE REQUIRED TOGETHER WITH THE PRODUCT TO OBTAIN SERVICE UNDER THIS WARRANTY.

This warranty shall not be extended to any other person or transferee. This warranty is void and of no effect if any serial numbers on the product are altered, replaced, defaced, missing or

if service was attempted by an unauthorized service center. This limited warranty does not apply to any product not purchased and used in the United States.

This warranty only covers failures due to defects in material or workmanship which occurs during normal use. It does not cover damage which occurs in shipment, or failures which are caused by repairs, alterations or product not supplied by FUNAI CORP., or damage which results from accident, misuse, abuse, mishandling, misapplication, alteration, faulty installation, improper maintenance, commercial use such as hotel, rental or office use of this product or damage which results from fire, flood, lightning or other acts of God.

THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY ACCESSORIES (EXCEPT REMOTE CONTROL), ANY COSMETIC PARTS, COMPLETE ASSEMBLY PARTS, DEMO OR FLOOR MODELS.

FUNAI CORP. AND ITS REPRESENTATIVES OR AGENTS SHALL IN NO EVENT BE LIABLE FOR ANY GENERAL, INDIRECT OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR OCCASIONED BY THE USE OF OR THE INABILITY TO USE THIS PRODUCT. THIS WARRANTY IS MADE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, AND OF ALL OTHER LIABILITIES ON THE PART OF FUNAI, ALL OTHER WARRANTIES INCLUDING THE WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED BY FUNAI AND ITS REPRESENTATIVES IN THE UNITED STATES. ALL WARRANTY INSPECTIONS AND REPAIRS MUST BE PERFORMED BY AN AUTHORIZED SERVICE CENTER. THIS WARRANTY IS ONLY VALID WHEN THE UNIT IS CARRIED-IN TO AN AUTHORIZED SERVICE CENTER.

THE PRODUCT MUST BE ACCOMPANIED BY A COPY OF THE ORIGINAL RETAIL PURCHASE RECEIPT. IF NO PROOF OF PURCHASE IS ATTACHED, THE WARRANTY WILL NOT BE HONORED AND REPAIRS COSTS WILL BE CHARGED.

IMPORTANT:

THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE. IF, AT ANY TIME DURING THE WARRANTY PERIOD, YOU ARE UNABLE TO OBTAIN SATISFACTION WITH THE REPAIR OF THIS PRODUCT, PLEASE CONTACT FUNAI CORP.

ATTENTION:

FUNAI CORP. RESERVES THE RIGHT TO MODIFY ANY DESIGN OF THIS PRODUCT WITHOUT PRIOR NOTICE.

WARRANTY STATEMENT REGARDING NON AUTHORIZED REPAIRS:

To obtain warranty service, you must take the product, or deliver the product freight prepaid, in either its original packaging or packaging affording an equal degree of protection, to any AUTHORIZED SERVICE CENTER. FUNAI CORP. will not reimburse you for any service done by unauthorized service providers without prior written approval.

To locate your nearest AUTHORIZED SERVICE CENTER or for general service inquiries, please contact us at :

FUNAI CORPORATION

Customer Service

Tel :1-800-474-0045

http://www.funai-corp.com

19900 Van Ness Avenue, Torrance, CA 90501

Printed in Malaysia L4908UJ

1EMN22170

★★★★★

FUNAI CR320IL8 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual