Funai CDVC90DP User Manual

Owner’s Manual

Please read before using this equipment.

DVD/CD Player with Video Cassette Recorder

Owner's Manual

ANT-OUT

ANT-IN

RF Cable (supplied)

(Back of
DVD/VCR)

(Back of TV)

(Back of TV)

AC
outlets

Plug in

4

5

From
TV

From
DVD/VCR

Please refer to "Connections" on page 5.

or

Cable
Signal

or

Cable
Signal

Disconnect

Antenna

2

Connect

3

Connect

Antenna

1

CDVC90DP

Table of Contents

Precautions

Laser Safety. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

■ Important Safeguards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Installation Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Avoid the Hazards of Electrical Shock and Fire. . . . . . . . . . . . . . 4

Moisture Condensation Warning. . . . . . . . . . . . . . . . . . . . . . . . . 4

About Copyright . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Notice for progressive scan outputs . . . . . . . . . . . . . . . . . . . . . . 4

Symbol Used in This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Setup

■ About the Video Cassettes and Discs . . . . . . . . . . . . . . . . . . . 5

Playable Video Cassettes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Playable Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Unplayable Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

■ Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

RF Output Channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Supplied Accessory

• Remote control
(NB109UD or NB159UD)

with two AA batteries

• Audio/Video cables
(WPZ0102TM015 or

WPZ0102LTE01)

• RF cable
(WPZ0901TM002)

• Owner’s Manual
(0VMN04015)

If you need additional operating assistance after
reading this owner’s manual or to order replace-

ment accessories, please call

TOLL FREE : 1-800-287-4871

Basic TV Connection

Tips for Cable Box or Satellite Box . . . . . . . . . . . . . . . . . . . . . . . 6

Connection to an Audio System . . . . . . . . . . . . . . . . . . . . . . . . . 6

Connection to a TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Front & Rear Terminals. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

■ About the Remote Control and Front Panel. . . . . . . . . . . . . . . 8

■ VCR/DVD Switching . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

■ Preparation for First Time Usage . . . . . . . . . . . . . . . . . . . . . . 10

Tu rn on the unit for the first time. . . . . . . . . . . . . . . . . . . . . . . . 10

Clock Set Up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

VCR Functions

■ Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

■ Recording & OTR (One Touch Recording) . . . . . . . . . . . . . . . 11

■ Other Operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

■ On-Screen Operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

■ Recording Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Timer Recording. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Tips for Timer Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Copying a Video Tape. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

■ MTS System (Multi-Channel Television Sound) . . . . . . . . . . . 13

■ Special Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Time Search / Index Search / Auto Repeat. . . . . . . . . . . . . . . . 14

DVD Functions

■ Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

■ MP3 Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

■ The On-Screen Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

■ Search Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Tr ack Search / Title/Chapter Search / Time Search . . . . . . . . . 17

■ Marker Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

■ Repeat / Random / Programmed Playback . . . . . . . . . . . . . . 18

Repeat Playback / Repeat A-B Playback /

Random Playback / Programmed Playback. . . . . . . . . . . . . . . . 18

■ Special Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Subtitle Language / Audio Language / Camera Angle /
Black Level Setting / Stereo Sound mode / Virtual Surround

■ DVD Set Up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

LANGUAGE Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

DISPLAY Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

AUDIO Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

PARENTAL Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

To return the All Selections of SET UP (except for PARENTAL) to the Default Setting

Information

■ Troubleshooting Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

■ Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

■ Language List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

■ Limited Warranty. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Quick Use Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27

Precautions

Setup

VCR Functions

DVD Functions

. . . . . . . 19

22

Information

Precautions

WARNING

CAUTION

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK).NO USER SERVICEABLE PARTS INSIDE. REFER

Precautions

SERVICING TO QUALIFIED SERVICE PERSONNEL.

:

: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS

APPLIANCE TO RAIN OR MOISTURE.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated “dangerous voltage” within the
product’s enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.

Laser Safety

This unit employs a laser.Only a qualified service person should remove the cover or attempt to service this device, due to possible
eye injury.

CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECI-

CAUTION: VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK DEFEATED. DO NOT STARE INTO

LOCATION: INSIDE, NEAR THE DECK MECHANISM.

FIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

BEAM.

FCC WARNING-This equipment may generate or use radio frequency energy. Changes or modifications to

this equipment may cause harmful interference unless the modifications are expressly approved in the
instruction manual. The user could lose the authority to operate this equipment if an unauthorized change
or modification is made.

RADIO-TV INTERFERENCE

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:

1) Reorient or relocate the receiving antenna.

2) Increase the separation between the equipment and receiver.

3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

4) Consult the dealer or an experienced radio/TV technician for help.

This Class B digital apparatus complies with Canadian ICES-003.

CAUTION:TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

ATTENTION: POUR ÉVITER LES CHOC ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE

DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU’AU FOND.

A NOTE ABOUT RECYCLING

This product’s packaging materials are recyclable and can be reused. Please dispose of any materials in accordance with your
local recycling regulations.

Batteries should never be thrown away or incinerated but disposed of in accordance with your local regulations concerning
chemical wastes.

Make your contribution to the environment!!!

• Used up batteries do not belong in the dust bin.

• You can dispose of them at a collection point for used up batteries or special waste.
Contact your council for details.

For Customer Use:
Read carefully the information located at the back of this unit and enter below the Serial No.Retain this information for future
reference.

Model No.
Serial No. _____________________

_____________________

–2–

EN

Important Safeguards

1. Read Instructions - All the safety and operating instruc­tions should be read before the appliance is operated.

2. Retain Instructions- The safety and operating instructions
should be retained for future reference.

3. Heed Warnings - All warnings on the appliance and in the
operating instructions should be adhered to.

4. Follow Instructions - All operating and use instructions
should be followed.

5. Cleaning - Unplug this video product from the wall outlet
before cleaning. Do not use liquid cleaners or aerosol
cleaners. Use a damp cloth for cleaning.
EXCEPTION: A product that is meant for uninterrupted
service and, that for some specific reason, such as the
possibility of the loss of an authorization code for a CATV
converter, is not intended to be unplugged by the user for
cleaning or any other purpose, may exclude the reference
to unplugging the appliance in the cleaning description
otherwise required in item 5.

6. Attachments - Do not use attachments not recommended
by the video product manufacturer as they may cause haz­ards.

7. Water and Moisture- Do not use this video product near
water, for example, near a bath tub, wash bowl, kitchen
sink, or laundry tub, in a wet basement, or near a swim­ming pool, and the like.

8. Accessories - Do not place this video product on an unsta­ble cart, stand, tripod, bracket, or table.The video product
may fall, causing serious injury to a child or adult, and seri­ous damage to the appliance. Use only with a cart, stand,
tripod, bracket, or table recommended by the manufactur­er, or sold with the video product. Any mounting of the
appliance should follow the manufactur­er's instructions and should use a
mounting accessory recommended by
the manufacturer. An appliance and cart
combination should be moved with care.
Quick stops, excessive force, and
uneven surfaces may cause the appli­ance and cart combination to overturn.

9. Ventilation - Slots and openings in the cabinet are provid­ed for ventilation and to ensure reliable operation of the
video product and to protect it from overheating, and these
openings must not be blocked or covered. The openings
should never be blocked by placing the video product on a
bed, sofa, rug, or other similar surface.This video product
should not be placed in a built-in installation such as a
bookcase or rack unless proper ventilation is provided or
the manufacturer's instructions have been adhered to.

10. Power Sources - This video product should be operated
only from the type of power source indicated on the mark­ing label. If you are not sure of the type of power supply to
your home, consult your appliance dealer or local power
company. For products intended to operate from battery
power, or other sources, refer to the operating instructions.

11. Grounding or Polarization - This video product is equipped
with a polarized alternating-current line plug (a plug having
one blade wider than the other). This plug will fit into the
power outlet only one way. This is a safety feature. If you
are unable to insert the plug fully into the outlet, try revers­ing the plug. If the plug should still fail to fit, contact your
electrician to replace your obsolete outlet. Do not defeat
the safety purpose of the polarized plug.

12. Power Cord Protection - Power supply cords should be
routed so that they are not likely to be walked on or
pinched by items placed upon or against them, paying par­ticular attention to cords at plugs, convenience recepta­cles, and the point where they exit from the appliance.

13. Outdoor Antenna Grounding - If an outside antenna or
cable system is connected to the video product, be sure
the antenna or cable system is grounded so as to provide
some protection against voltage surges and built-up static
charges. Article 810 of the National Electrical Code,
ANSI/NFPA No. 70, provides information with regard to

proper grounding of the mast and supporting structure,
grounding of the lead-in wire to an antenna discharge unit,
size of grounding conductors, location of antenna-dis­charge unit, connection to grounding electrodes, and
requirements for the grounding electrode. (Fig. A)

FIGURE A

EXAMPLE OF ANTENNA GROUNDING

AS PER NATIONAL ELECTRICAL CODE

GROUND
CLAMP

ELECTRIC
SERVICE
EQUIPMENT

NEC – NATIONAL ELECTRICAL CODE

S2898A

ANTENNA
LEAD
WIRE

ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)

GROUNDING CONDUCTORS
(NEC SECTION 810-21)

GROUND CLAMP

POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)

14. Lightning - For added protection for this video product dur­ing a lightning storm, or when it is left unattended and
unused for long periods of time, unplug it from the wall out­let and disconnect the antenna or cable system. This will
prevent damage to the video product due to lightning and
power-line surges.

15. Power Lines - An outside antenna system should not be
located in the vicinity of overhead power lines or other
electric light or power circuits, or where it can fall into such
power lines or circuits.When installing an outside antenna
system, extreme care should be taken to keep from touch­ing such power lines or circuits as contact with them might
be fatal.

16. Overloading - Do not overload wall outlets and extension
cords as this can result in a risk of fire or electric shock.

17. Object and Liquid Entry - Never push objects of any kind
into this video product through any openings as they may
touch dangerous voltage points or short-out parts that
could result in a fire or electric shock. Never spill liquid of
any kind on the video product.

18. Servicing - Do not attempt to service this video product
yourself as opening or removing covers may expose you
to dangerous voltage or other hazards. Refer all servicing
to qualified service personnel.

19. Damage Requiring Service - Unplug this video product
from the wall outlet and refer servicing to qualified service
personnel under the following conditions:

a. When the power-supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen into the

video product.

c. If the video product has been exposed to rain or water.
d. If the video product does not operate normally by following

the operating instructions. Adjust only those controls that
are covered by the operating instructions as an improper
adjustment of other controls may result in damage and will
often require extensive work by a qualified technician to
restore the video product to its normal operation.

e. If the video product has been dropped or damaged in any

way.

f. When the video product exhibits a distinct change in per-

formance this indicates a need for service.

20. Replacement Parts - When replacement parts are
required, be sure the service technician has used replace­ment parts specified by the manufacturer or have the
same characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock or other haz­ards.

21. Safety Check - Upon completion of any service or repairs
to this video product, ask the service technician to perform
safety checks to determine that the video product is in
proper operating condition.

22. Heat - This video product should be situated away from
heat sources such as radiators, heat registers, stoves, or
other products (including amplifiers) that produce heat.

–3–

Precautions

EN

Installation Location

MP3MP3

MP3

CDCD

CD

DVD-V

DVD-V

VCRVCR

VCR

For safety and optimum performance of this unit:

• Install the unit in a horizontal and stable position. Do
not place anything directly on top of the unit. Do not
place the unit directly on top of the TV.

• Shield it from direct sunlight and keep it away from
sources of intense heat. Avoid dusty or humid
places. Avoid places with insufficient ventilation for
proper heat dissipation. Do not block the ventilation
holes on the sides of the unit. Avoid locations sub-

Precautions

ject to strong vibration or strong magnetic fields.

Avoid the Hazards of Electrical Shock and Fire

• Do not handle the power cord with wet hands.

• Do not pull on the power cord when disconnecting it
from AC wall outlet. Grasp it by the plug.

• If, by accident, water is spilled on this unit, unplug
the power cord immediately and take the unit to an
Authorized Service Center for servicing. Call 1-800­287-4871 to find out where the nearest Authorized
Service Center is located.

• Do not put your fingers or objects into the DVD/VCR
cassette holder.

Moisture Condensation Warning

Moisture condensation may occur inside the unit
when it is moved from a cold place to a warm place,
or after heating a cold room or under conditions of
high humidity. Do not use this unit at least for 2 hours
until its inside gets dry.

About Copyright

Unauthorized copying, broadcasting, public perfor­mance and lending of discs are prohibited.
This product incorporates copyright protection tech­nology that is protected by method claims of certain
U.S. patents and other intellectual property rights
owned by Macrovision Corporation and other rights
owners. Use of this copyright protection technology
must be authorized by Macrovision Corporation, and
is intended for home and other limited viewing uses
only unless otherwise authorized by Macrovision
Corporation. Reverse engineering or disassembly is
prohibited.

Notice for progressive scan outputs

Consumers should note that not all high definition televi­sion sets are fully compatible with this product and may
cause artifacts to be displayed in the picture. In case of
525 progressive scan picture problems, it is recom­mended that the user switch the connection to the ‘stan­dard definition’ output. If there are questions regarding
our TV set compatibility with this model 525p DVD play­er, please contact our customer service center.

Symbol Used in This Manual

The following symbols appear in some head­ings and notes in this manual.

: Description refers to playback or recording

of video cassette tapes.

:

Description refers to playback of DVD-Video discs.

: Description refers to playback of Audio CDs.

: Description refers to playback of MP3 files.

Maintenance

SERVICING

¡Please refer to relevant topics on the Troubleshooting

Guide on page 23 before returning the product.

¡When this unit become inoperative, do not try to cor-

rect the problem by yourself. There are no user-ser­viceable parts inside. Turn off, unplug the power plug,
and please call our help line mentioned on the front
page to locate an Authorized Service Center.

CLEANING THE CABINET

¡Use a soft cloth slightly moistened with a mild deter-

gent solution. Do not use alcohol, solvents or any
other abrasive liquids and/or materials.

CLEANING DISCS

¡When a disc becomes dirty, clean it with a cleaning

cloth. Wipe the disc from the center out. Do not wipe
in a circular motion.

¡

Do not use solvents such as benzine, thinner, commercial­ly available cleaners, detergent, abrasive cleaning agents
or antistatic spray intended for analogue records.

CLEANING THE DISC LENS

¡If this unit still does not perform properly although

you refer to the relevant sections and to “TROU­BLESHOOTING GUIDE” in this Owner’s Manual, the
laser optical pickup unit may be dirty. Consult your
dealer or an Authorized Service Center for inspection
and cleaning of the laser optical pickup unit.

DISC HANDLING

¡Handle the discs so that fingerprints and dust do not

adhere to the surfaces of the discs.

¡Always store the disc in its protective case when it is

not used.

AUTO HEAD CLEANING

¡Automatically cleans video heads as you insert or

remove a cassette, so you can see a clearer picture.

¡Playback picture may become blurred or interrupted

while the TV program reception is clear. Dirt accu­mulated on the video heads after a long period of
use, or the usage of rental or worn tapes can cause
this problem. If a streaky or snowy picture appears
during playback, the video heads in your DVD/VCR
may need to be cleaned.

1. Please visit your local Audio/Video store and pur­chase a good quality VHS Video Head Cleaner.

2. If a Video Head Cleaner does not solve the problem,
please call our help line mentioned on the front page
to locate an Authorized Service Center.

NOTES:
¡Remember to read the instructions included with the

video head cleaner before use.

¡Clean video heads only when problems occur.

Note to CATV system installer

This reminder is provided to call the CATV system
installer’s attention to Article 820-40 of the NEC that
provides guidelines for proper grounding and, in par­ticular, specifies that the cable ground should be
connected to the grounding system of the building,
as close to the point of cable entry as practical.

Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trade­marks of Dolby Laboratories.

–4–

EN

Setup

DVD-Video

* 1,2,4,6

* 1,2,3,4,5,6

* 1,2,3,4,5,6

* 4,6

* 4,5,6

or

DVD-R

DVD-RW

DVD+R

DVD+RW

Audio CD

CD-R

CD-RW

Digital video

(MPEG2)

-

-

-

Digital audio

or

MP3

Region code

Mark (logo)

Playable

discs

Recorded

signals

Disc size

Disc types

12 cm

or

8cm

12 cm

or

8cm

Example

Title 1 Title 2

Chapter 1 Chapter 2 Chapter 1

Chapter 2

Chapter 3 Chapter 4

Example

Group 1 Group 2

Tra ck 1

Tra ck 2

Tra ck 5

Tra ck 6

Tra ck 3

Tra ck 4

Example

Tra ck 1

Tra ck 2

Tra ck 5

Tra ck 6

Tra ck 3

Tra ck 4

Digital audio

MP3

About the Video Cassettes and Discs

Playable Video Cassettes

Use only cassettes marked with this DVD/VCR.

Playable Discs

If you cannot play back a disc which bears one of the marks above, check the following notes.

*1: This unit conforms to the NTSC color system. Discs recorded in other color systems such as PAL cannot be played back.

Certain DVD-Video discs do not operate as described in this manual due to the intentions of the disc’s producers.

*2:
*3: Only the discs which have been recorded in the video format and finalized can be played back.

Discs unfinalized or recorded in the video recording format cannot be played back.
Depending on the recording status of a disc, the disc may not be played back at all or normally

(the picture or sound may be not be smooth, etc.).
*4: Scratched or stained discs may not be played back.
*5: Some discs cannot be played back because of incompatible recording conditions, characteristics of the recorder or special properties of discs.
*6: You can play back discs which bear the marks above. If you use nonstandardized discs, this unit may not play them back. Even if they are

played back, the sound or video quality will be compromised.

Setup

Unplayable Discs

¡

On the following discs, only the sound can be heard (picture cannot be viewed).

CDV

CD-G

¡

NEVER play back the following discs. Otherwise, malfunction may result!

DVD-RAM

CD-I

Photo CD

DVD with region codes other than 1 or ALL

DTS-CD

DVD-ROM for personal computers

CD-ROM for personal computers

¡

On the following disc, the sound MAY NOT be heard.

Super Audio CD

Note: Only the sound recorded on the normal CD layer can be delivered.

¡

Connections

Please refer to “Basic TV Connection” on the front page before you use this unit.

The sound recorded on the high density Super Audio CD layer cannot be delivered.

Any other discs without compatibility indications.

RF Output Channel

If channel 3 is already occupied for broadcasting,

1) Set your TV to channel 4.

2) Insert a pre-recorded tape into this unit.

3) Press the OUTPUT button on the DVD/VCR so that the VCR OUTPUT light is lit.
If “VCR” light does not appear

•

on the display of this unit

, press the VCR/TV button on the remote control.

4) Press the PLAY button once.

5) After a few seconds, press the PLAY button

•

The RF output channel will change to channel 4 from channel 3 and you will see a playback picture.

In this case, “ch04” will appears on the front panel.

• When a picture does not appear on the TV screen, repeat step [4].

6) Press the STOP button to stop playback.

on the DVD/VCR for 3 seconds.

–5–

Tips

Tips

• The RF output channel may
not change when you adjust
tracking during playback. In
this case, stop the playback,
and start the playback again.
After that, press the PLAY
button on the DVD/VCR for 3
seconds again.

EN

ANT-OUT

ANT-IN

RF Cable

(supplied)

(Back of DVD/VCR)

IN

OU

T

E

(Back of TV)

Cable
Signal

Connection A

(Cable box or

Satellite box)

ANT-OUT

ANT-IN

RF Cable (supplied) RF Cable

(Back of TV)

IN

OUT

(Cable box or

Satellite box)

E

Cable
Signal

Connection B

(Back of DVD/VCR)

Tips for Cable Box or Satellite Box

LR

VCRDVD/VCR

AUDIO IN

VIDEO IN

AUDIO OUT

VIDEO OUT

LL

RR

DIGITAL

AUDIO OUT

or

COAXIAL

AUDIO

OUT

DVD

S-VIDEO

OUT

COMPONENT
VIDEO OUT

L

Y

C

B

/

P

B

C

R

/

P

R

R

DIGITAL

AUDIO OUT

COAXIAL

AUDIO

OUT

DVD

S-VIDEO

OUT

COMPONENT

VIDEO OUT

L

Y

C

B

/

P

B

C

R

/

P

R

R

COAXIAL

Select this connection when you want to view or record a scram­bled channel. With this connection, channels cannot be changed
on the DVD/VCR.You can view or record ONLY the channels you
have selected on the cable box or the satellite box.

• While you are recording, only the recorded channel can be
viewed.

To select channels of the cable box or satellite box

1) Turn on the DVD/VCR by pressing the POWER button, and

then, press the VCR/TV button.The “POWER” and “VCR” lights
on the front panel will appear. Then, press the CHANNEL but­tons to select channel 3 or 4 (the same channel as the output
channel of the cable b ox or satellite box).

• If you use the channel 4, you need to change the DVD/VCR’s

RF output to channel 4. Refer to “RF Output Channel”.

2) At the TV, select channel 3 or 4 (the same channel as you

Setup

have selected at step 1).

3) At the cable box or satellite box, select the channel you want to

view or record.

Connection to an Audio System

Method 1

Stereo system

Analog audio
input jacks

AUDIO

Audio cable

(supplied)

Select this connection when you want to change channels on the
DVD/VCR.With this connection, you may watch one channel
while recording another.

• You may not view or record a scrambled channel.

To select channels of the cable box or satellite box

1) At the cable box or satellite box, select channel 3 or 4 (the
same channel as the DVD/VCR’s RF output channel.)

• Refer to “RF Output Channel”.

2) At the TV, select the same channel as the output channel (3 or

4) of the cable box or satellite box.

3) Turn on the DVD/VCR by pressing the POWER button, and
then, press the VCR/TV button.The “POWER” and “VCR” lights
on the front panel will appear. Then, select the channel you
want to view or record.

To play back a tape

Follow the steps 1) to 2) above. Then, play back a tape.

• Refer to “Playback” on page 11.

To view one channel while recording another

1)

While you are recording on the DVD/VCR, press the VCR/TV but­ton so that the “VCR” light disappears on the DVD/VCR.

2)

At the cable box or satellite box, select the channel you want to view.

Method 2

Dolby Digital decoder,

MD deck or DAT deck

Digital audio
input jack

Audio Coaxial

Digital cable

(commercially

available)

DVD/VCR

(Analog)
AUDIO OUT

DIGITAL
AUDIO OUT

Note

• If output is Dolby Digital encoded audio, connect to a Dolby
Digital decoder, and set “DOLBY DIGITAL” to “ON” in the
AUDIO menu. (Refer to page 21.)

• The audio source on a disc in a Dolby Digital 5.1 channel
surround format cannot be recorded as digital sound by an
MD or DAT deck.

• Unless connected to a Dolby Digital decoder, set “DOLBY
DIGITAL” to “OFF” in the AUDIO menu. Playing a DVD
using incorrect settings may generate noise distortion, and
may also damage the speakers. (Refer to page 21.)

• Set “DOLBY DIGITAL” to “OFF” in the AUDIO menu before
connecting to an MD deck or DAT deck. (Refer to page 21.)

• By hooking this unit up to a Multi-channel Dolby Digital
decoder, you can enjoy high-quality 5.1ch Dolby Digital
surround sound as heard in the movie theaters.

–6–

EN

DIGITAL

AUDIO OUT

COAXIAL

ANT-OUT

ANT-IN

AUDIO

OUT

DVD VCR

DVD/VCR

S-VIDEO

OUT

COMPONENT
VIDEO OUT

AUDIO IN

VIDEO IN

AUDIO OUT

VIDEO OUT

L

LY

C

B/

P

B

C

R/

P

R

L

RR

R

AUDIO IN

LR

VCRDVD/VCR

AUDIO IN

VIDEO IN

AUDIO OUT

VIDEO OUT

L

L

R

R

DIGITAL

AUDIO OUT

COAXIAL

AUDIO

OUT

DVD

S-VIDEO

OUT

COMPONEN

VIDEO OUT

L

R

or

VIDEO IN

VCRDVD/VCR

AUDIO IN

VIDEO IN

AUDIO OUT

VIDEO OUT

L

L

R

R

S-VIDEO IN

DIGITAL

AUDIO OUT

COAXIAL

AUDIO

OUT

DVD

S-VIDEO

OUT

COMPONENT

VIDEO OUT

L

R

Y

C

B/

P

B

C

R/

P

R

DIGITAL

AUDIO OUT

CB

Y

C

R

COMPONENT

VIDEO IN

or

COAXIAL

AUDIO

OUT

DVD

S-VIDEO

OUT

COMPONENT

VIDEO OUT

L

R

Y

C

B/

P

B

C

R/

P

R

PB

Y

P

R

Connection to a TV

E

Method 1

Good pictureBasic Audio

Method 2 Method 3

Better picture Best picture

TV

Audio cable

(supplied)

Video

cable

(supplied)

DVD/VCR

VIDEO OUT

Note

•

Connect this unit directly to the TV. If the A/V cables are connected to a VCR, pictures may be distorted due to the copy protection system.

•

When progressive scanning mode is selected, no video signal will be output from the VIDEO OUT or S-VIDEO OUT jacks.

•

The COAXIAL,

(Analog) AUDIO OUT

DVD AUDIO OUT,

S-VIDEO OUT, and COMPONENT VIDEO OUT jacks are only useful in DVD mode.

S-Video

cable

(commercially

available)

S-VIDEO OUT

Component
Video cables
(commercially
available)

COMPONENT VIDEO OUT

Setup

If your TV is compatible with progressive scanning 525p (480p) and you want to
enjoy that high quality picture;

You must select the connection Method 3 above and progressive scanning mode. To set the mode,
press and hold the PLAY button on the front panel for more than 5 seconds, so that “P.SCAN” will
appear on the display of this unit. (The progressive scanning is not available in the VCR mode.)

If your TV is not compatible with progressive scanning;

Use this unit in interlace mode. Make sure that no “P.SCAN” is on the display of this unit. If not, press
and hold the PLAY button on this unit for more than 5 seconds, so that “P.SCAN” on the display of
this unit will disappear.

Front & Rear Terminals

DVD ANALOG AUDIO OUT
jacks

Connect the supplied audio
cables here through the Audio
In jacks of a television or other
audio equipment. (DVD only)

COAXIAL jack

Connect an optional coaxial
digital audio cable here
through the coaxial digital
audio in jack of a decoder or
audio receiver. (DVD only)

S-VIDEO OUT jack

Connect an optional
S-Video cable here
through the S-video
in jack of a televi­sion. (DVD only)

DVD/VCR AUDIO OUT jacks

Connect the supplied audio
cables here through the audio
In jacks of a television or other
audio equipment.

DIGITAL

AUDIO OUT

COMPONENT VIDEO

COAXIAL

OUT jacks

Connect optional component
video cables here through
the component video in
jacks of a television.
(DVD only)

DVD

AUDIO

OUT

L

R

DVD/VCR

Y

C

B
B

P

C

R
R

P

AUDIO OUT

DIGITAL

AUDIO OUT

/

VIDEO OUT

/

COAXIAL

VCR

AUDIO IN

L

L

DVD VCR

COMPONENT

AUDIO

S-VIDEO

VIDEO OUT

OUT

OUT

L

R

R

R

VIDEO IN

S-VIDEO

OUT

COMPONENT

VIDEO OUT

DVD/VCR VIDEO OUT jack

Connect the supplied yellow
video cable here through
the TV’s video in jack.

–7–

AUDIO IN jacks

Connect audio cables coming
from the audio out jacks of a
camcorder, another VCR, or an
audio source here.

DVD/VCR

AUDIO IN

AUDIO OUT

LYL

CB/

RR

P

B

VIDEO IN

VIDEO OUT

CR/
P

R

[Back of DVD/VCR]

VIDEO IN jack

Connect a cable com­ing from the video out
jack of a camcorder,
another VCR, or an
audio-visual source
(laser disc player, video
disc player, etc.) here.

[Progressive scanning mode]

ANT IN jack

Connect your antenna
or cable box here.

ANT-IN

ANT-IN

ANT-OUT

ANT-OUT

[DVD/VCR]

OUTPUT

DVD

VCR

STOP

PLAY

more than 5 seconds

[Interlace mode]

POWER

V

ID

E

O

L

-- A
U

D

IO

--

R

[Front of
DVD/VCR]

ANT OUT jack

Connect the
supplied RF
cable to the
antenna input
jack on your TV.

EN

STOP/EJ

F.FWDREW

/

About the Remote Control and Front PanelAbout the Remote Control and Front Panel

• To turn the unit on or off. • To turn the unit on or off. • To turn the unit on or off.

• To display the current disc

mode.

• To display the current disc
mode.

• To display the current time,
tape counter, and channel.

• To open or close the disc
tray.

• To open or close the disc
tray.

• To eject the video cassette
from the VCR.

•

To select chapter or title directly.

• To select track directly.

• To select camera angles on

a disc.

• To select subtitles on a disc.

• To put the VCR into standby

mode for a timer recording.

• To select audio languages on
a disc.

• To select STEREO,
L-CH or R-CH. (CD)

• To repeat between your
chosen point A and B.

• To repeat between your
chosen point A and B. (CD)

• To play a chapter or title
repeatedly.

• To play a track or disc
repeatedly. (CD)

• To play a track, group or disc
repeatedly. (MP3)

• To return to the previous

operation on the DVD setup
menu.

• To set black level on/off.

• To set virtual surround on/off.

• To arrange the playing

order or play randomly.

• To set virtual surround on/off.

• To call up the MP3 menu.

(MP3)

• To magnify part of a picture.
(x2/ x4)

• To call up the Menu
on a disc.

• To call up the VCR Menu.

• To call up the Top Menu

on a disc.

• To return to the previous
operation on the DVD setup
menu.

•

To search chapter, title or time.

• To rapidly return to
a location of disc.

• Search the markers.

• To search track.

• To search time. (CD)

• To rapidly return to a location

on the disc.

• Search the markers. (CD)

• To select the recording speed.

• To select channel.

• The +10 button has no effect

in VCR mode.

• To clear the markers.

• To clear the markers. (CD)

• To remove status No.

in program input.

• To clear the numbers
entered incorrectly.

• To clear the numbers
entered incorrectly.

• To exit the VCR Menu.

• To reset the tape counter.

• To search forward/backward

through a disc.

•

To begin slow forward/reverse
playback during the pause mode.

• To search forward/backward
through a disc.

• To forward/backward a tape.

• To advance playback

one frame at a time.

• To advance playback
one frame at a time.

• To pause disc playback.

• To pause disc playback.

• To pause tape playback or

recording.

• To stop playback. • To stop playback.

• To stop playback or recording.

• To skip chapters. • To skip tracks.

•

To return to the top file of the
highest hierarchy in the program
and MP3 menu. (MP3)

• To change channels.

•

To adjust the tracking manually

during playback.

• To begin disc playback. • To begin disc playback.

• To begin tape playback.

• To call up the DVD setup

menu.

• To call up the index or time

search menu.

• To call up the DVD setup
menu.

• To activate the remote control
in DVD mode.

• To select the DVD output
mode.

•

To activate the remote control

in DVD mode.

• To select the DVD output
mode.

• To select VCR position or

TV position.

• To select CD/MP3 position
or TV position.

• To select DVD position or
TV position.

• To view the tape
in slow motion.

• To select the VCR output
mode.

• To activate the remote control
in VCR mode.

• To start a recording.

• To move the cursor and

determine its position.

• To move the cursor and
determine its position.

• To select an item
on the VCR Menu.

• To advance to the next
VCR Menu.

•

To go back one step during

clock and timer setting.

VCR mode

DVD mode

POWER

MENU

TOP MENU

MODE

SUBTITLE

T-SET

ANGLE

REPEAT

A-B

123

456

789

0

+1 0

ZOOM

SPEED

VCR

PAUSE

SLOW

VCR/TV

SKIP/CH.

SKIP/CH.

PLAY

STOP

REC/OTR

SETUP

ENTER

DVD-V

DVD-V

CDCD

CD

MP3MP3

MP3

VCRVCR

VCR

Button

(Alphabetical order)

Disc/Tape

OPEN/CLOSE

/EJECT

CLEAR/

C. RESET

SEARCH

MODE

DVD

RETURN

AUDIO

DISPLAY

POWER

DISPLAY VCR DVD PAUSE

SLOW

VCR/TV

SKIP/CH.

PLAY

STOP

REC/OTR

MENU

SETUP TOP MENU

MODE ZOOM

SUBTITLE

T-SET

ANGLE

ENTER

RETURN

SEARCH

MODE

REPEAT A-B

OPEN/CLOSE

/EJECT

SPEED AUDIO

CLEAR/

C. RESET

123

456

789

0

+1 0

2

1

3

Within about

23 feet (7m)

Remote
control

Remote Control

Setup

Installing the Batteries
for the Remote Control

Install two AA batteries
(supplied) matching the polarity indi­cated inside battery compartment of
the remote control.

Keep in mind the following when using
the remote control:

• Make sure that there is no obsta­cle between the remote and the
remote sensor on the unit.

• Use within the operating range
and angle, as shown.

–8–

EN

CHANNEL

DVD

STOP

OUTPUT

DVD

OPEN/CLOSE

PLAYSTOP/EJECT PLAY REC/OTR

VCR

POWER

F.FWDREW

V
ID

EO

-- A
U

D

IO

--

L

R

/

OUTPUT

DVDVCR

OUTPUT button

DVD OUTPUT
light

VCR OUTPUT
light

DVD button

VCR button

POWER

DISPLAY VCR DVD PAUSE

SLOW

VCR/TV

SKIP/CH.

PLAY

STOP

REC/OTR

MENU

SETUP TOP MENU

MODE ZOOM

SUBTITLE

T-SET

ANGLE

ENTER

RETURN

SEARCH

MODE

REPEAT A-B

OPEN/CLOSE

/EJECT

SPEED AUDIO

CLEAR/

C. RESET

123

456

789

0

+1 0

MP3

CD

VCR

Front Panel Display

DVD-V

DVD-V

Displays a type of the disc

Lights up when the
A-B repeat function
is on.

OPEN/CLOSE

POWER

V

ID

E

O

F.FWDREW

L

-­ A

U

D
IO

--

/

R

DVD

OUTPUT

DVD

VCR

CHANNEL

STOP

PLAYSTOP/EJECT PLAY REC/OTR

which is inserted on the tray.

• DVD: DVD disc

• CD: Audio CD, MP3

Lights up when the
repeat function is on.

GROUP P.SCAN

CD

CD

MP3

MP3

Lights up when the
progressive scan
system is activated.

DVD

CD

Lights up when

No disc inserted

the ALL repeat
function is on.

Lights up when the
inserted disc comes
to a pause.

Lights up when playing back
in slow mode. (DVD)

Displays how long the current title
or track has been played back. When
a chapter or track is switched, the
number of a new title, chapter or
track is displayed.

Lights up when the inserted
disc is being played back.

/ can not read disc

VCR

Opening the tray

Closing the tray

Loading the disc

When a disc or tape is
being played back

Lights up
when a tape is
in the DVD/VCR.

Lights up during
playback when
the repeat function
is on.

Lights up when
the playback is
in still or slow mode.

Lights up when the inserted
cassette is being played
back.

Lights up when
the DVD/VCR is
in VCR position.
This light does not
appear when the
DVD/VCR is in
TV position.

Lights up when
the timer recording or an
OTR recording has been set.

Lights up during a recording.
Flashes when a recording
is paused.

VCR REC

PM

Lights up when
current time is P.M.

Works as a tape counter(hour,minute,second).
Also displays a channel number,
tape speed, remaining time for OTR or
current time.

VCR

Setup

VCR/DVD Switching

Because this product is a combination of a VCR and a DVD player, you must select first which
component you wish to operate with the OUTPUT button.

VCR MODE

Press the VCR button on the remote control.

(Verify that the VCR OUTPUT light is lit.)

DVD MODE

Press

(Verify that the DVD OUTPUT light is lit.)

the DVD button on the remote control.

Note

• Pressing only the OUTPUT button on the front

panel DOES NOT switch the mode of the
remote control. You MUST select the correct
mode on the remote control.

–9–

EN

YES

NO

TV Screen

VCRVCR

VCR

Preparation for First Time Usage

VCR

MENU

VCRVCR

VCR

VCR

Turn on the unit for the first
time

VCR

1

1

Tu rn on the TV and set it
to channel 3.

• If channel 3 is already occupied for broadcasting,
see“RF Output Channel” section.

POWER

2

2

LANGUAGE SELECT

B ENGLISH [ON]

Setup

3

3

or

FRANÇAIS
ESPAÑOL

AUTO SET UP

CH 01

To Preset the Channel Again

1) Press the MENU button until the main

menu appears.

2) Select "CHANNEL SET UP" by pressing

the

K or L button. Then, press the B but-

ton.

3)

Select "AUTO SET UP" by pressing the
K or L button. Then, press the B button.
After scanning, the tuner stops on the low­est memorized channel.

To Change the On-Screen Language

1) Press the MENU button until the main

menu appears.

2)

Select "LANGUAGE SELECT" by press­ing the

K or L button. Then, press the B

button.

Select "ENGLISH" , "FRANÇAIS" or

3)

"ESPAÑOL"

ton. Then, press the CLEAR/C.RESET
button.

Tips

Tips

• If you accidentally select Spanish or
French and need English: Press the
MENU button and choose SELEC.
IDIOMA, or SELECTION LANGUE. Press
the B button, and select ENGLISH. Finally,
press the CLEAR/C.RESET button.

by pressing the K or L but-

Clock Set Up

VCR

4

4

or

5

5

or

6

6

or

CLOCK SET

MONTH DAY YEAR

0 3 / 1 5 2 0 0 4

HOUR MINUTE AM/PM

– – : – – – –

Select the current year

CLOCK SET

MONTH DAY YEAR

0 3 / 1 5 MON 2 0 0 4

HOUR MINUTE AM/PM

0 5 : – – – –

Select the current hour

CLOCK SET

MONTH DAY YEAR

0 3 / 1 5 MON 2 0 0 4

HOUR MINUTE AM/PM

0 5 : 4 0 – –

Select the current minute

Do you connect the cable from the cable box or
the satellite box to the DVD/VCR’s ANT IN jack?

es Press the MENU

YYes

button to exit

• Refer to “Tips for Cable Box
or Satellite Box” section on
page 6.

No

Please wait for a few minutes.

No

After scanning...

• The tuner stops on the lowest memorized
channel.

•You can select only the channels memo­rized in this unit by using the CHANNEL
buttons.

• If "AUTO SET UP" appears on the TV
screen again, check the cable connections.
Then, press the

Tips

Tips

• Repeat these steps only if either there
was a power failure or this unit has been
unplugged for more than 30 seconds.

B button once again.

To Select a Channel

You can select a channel by directly
entering channel using the Number but­tons on the remote control.

Notes for using the Number buttons:

• When selecting cable channels which
are higher than 99, enter channel
numbers as a three-digit number.(For
example: 117, press 1,1,7)

• You must precede single-digit channel
numbers with a zero (For example:
02, 03, 04 and so on).

1

1

or

2

2

3

3

• If the clock is not set, the

or

or

-MENU-

TIMER PROGRAMMING
AUTO REPEAT [OFF]
CHANNEL SET UP

B CLOCK SET

LANGUAGE SELECT
AUDIO OUT
TV STEREO [ON]
SAP

CLOCK SET screen
appears when you press
the MENU button. In this
case, go to step [2].

CLOCK SET

MONTH DAY YEAR

0 3 / – – – – – –

HOUR MINUTE AM/PM

– – : – – – –

Select the current month

CLOCK SET

MONTH DAY YEAR

0 3 / 1 5 – – – –

HOUR MINUTE AM/PM

– – : – – – –

Select the current day

7

7

or

8 To exit the CLOCK SET

8

CLOCK SET

MONTH DAY YEAR

0 3 / 1 5 MON 2 0 0 4

HOUR MINUTE AM/PM

0 5 : 4 0 P M AM

Select “AM” or “PM”

B PM

screen.

Tips

Tips

• To go back one step, press the s button
(during the steps [2] to [7].)

Your clock setting will be lost if either there

•
is a power failure or this unit has been
unplugged for more than 30 seconds.

–10–

EN

CHANNEL

DVD

OPEN/CLOSE

STOP/EJECT PLAY REC/OTR

V

POWER

F.FWDREW

V

I
D

E

O

-­A
U

D

IO

-

-

L

R

/

POWER

DISPLAY VCR DVD PAUSE

SLOW

VCR/TV

SKIP/CH.

PLAY

STOP

REC/OTR

OPEN/CLOSE

/EJECT

SPEED AUDIO

123

456

789

0

+1 0

TV Screen

PLAY

STOP

OPEN/CLOSE

/EJECT

Record tab

TV Screen

123

456

789

0

SPEED

REC/OTR

(

STOP

OPEN/CLOSE

/EJECT

CHANNEL

DVD

OPEN/CLOS

STOP/EJECT PLAY REC/OTR

POWER

F.FWDREW

V
ID

E

O

-- A
U

D

IO

--

L

R

/

POWER

DISPLAY VCR DVD PAUSE

SLOW

VCR/TV

SKIP/CH.

PLAY

STOP

REC/OTR

MENU

ENTER

OPEN/CLOSE

/EJECT

SPEED AUDIO

123

456

789

0

+1 0

VCR Functions

SKIP/CH.

VCRVCR

VCR

VCRVCR

VCR

VCR

VCR

Playback

Tu rn on the TV and set it to
channel 3.

• If channel 3 is already occupied
for broadcasting, see “RF Output
Channel” section.

VCR

1

1

3

3

STOP

2

2

4

4

PLAYB

EJECT A

4

4

2

2

3

3

1

1

3

223

4

4

Recording & OTR (One Touch Recording)

Tu rn on the TV and set it to
channel 3.

• If channel 3 is already occupied
for broadcasting, see “RF Output
Channel” section.

1

1

with tab

3

3

4

4

You can select a fixed recording time by press­ing the REC/OTR button repeatedly.

REC OTR(0:30) OTR(1:00).....

(Normal recording)

5

5

VCR

2

2

• Select the
desired channel

SP

Tape Speed Recording/Playback Time
Type of tape T60 T120 T160

SP mode 1hour 2hours 2-2/3hours
SLP mode 3hour 6hour 8hour

OTR

• Select the desired tape
speed

REC

8:00) OTR(7:30)

6

6

STOP

EJECT A

2

2

CH12

5

5

4

4

Accidental erasure prevention

To prevent accidental recording on a record­ed cassette, remove its record tab. To record
on it later, cover the hole with cellophane
tape.

You CAN NOT copy a DVD to a videotape.

To stop recording temporarily (Pause mode)

Press the PAUSE/STILL button.

• During the rec-pause mode, five Cmarks appear on the TV
screen. Each Cmark represents one minute.

• Press it again to resume recording.

6

3

6

3

1

1

5

5

4

4

6

6

Tips

Tips

• When a tape with­out record tab is
inserted, the
DVD/VCR will start
playback automati­cally.

• Tracking will be
automatically
adjusted upon play­back. To adjust the
tracking manually,
press the CHAN­NEL buttons.

Tips

Tips

•To view one chan-

2

2

nel while recording
another

1) While you are
recording on the
DVD/VCR, press
the VCR/TV button
so that the “VCR”
light disappears on
the DVD/VCR.

2) At the cable box
or satellite box,
select the channel
you want to view.

• If you have connect­ed the DVD/VCR to
a cable box or satel­lite box, refer to
“Tips for Cable Box
or Satellite Box”
section on page 6.

VCR Functions

Other Operations

To cue or review picture during playback
(Picture Search)

Press the F.FWD or REW button.

• Press it again and the DVD/VCR will search in
super high speed. (in the LP/SLP modes only)

To freeze the picture on TV screen during play­back (Still mode)

Press the PAUSE/STILL button. Each time you
press the button, the picture will be forwarded by
one frame.

• If the picture begins to vibrate vertically during the
still mode, stabilize the picture by pressing the
CHANNEL buttons.

• If the picture is distorted or rolling vertically, adjust
the vertical hold control on your TV, if equipped.

Counter Reset

Press the CLEAR/C.RESET button.

To play back in slow motion

Press the SLOW button during playback or the still
mode.

• If the noise bars appear on the TV screen, you can
reduce it by pressing the CHANNEL buttons.

Auto Rewind

When a tape reaches its end during playback, fast-for­ward, or recording (except timer recording and One
Touch Recording), the tape will automatically rewind
to the beginning. After rewinding finishes, the
DVD/VCR will eject the tape.

–11–

Tips

Tips

•

Still/Slow/Pause
mode will be
automatically
cancelled after 5
minutes to pre­vent damage to
the tape and the
video head.

• To return to
playback from
the Picture
Search/Still/
Slow mode,
press the PLAY
button.

EN

On-Screen Operations

MENU

CLEAR/

C. RESET

DISPLAY VCR DVD PAUSE

SLOW

VCR/TV

SKIP/CH.

PLAY

STOP

REC/OTR

MENU

SETUP TOP MENU

MODE ZOOM

SUBTITLE

T-SET

ANGLE

ENTER

RETURN

SEARCH

MODE

REPEAT A-B

CLEAR/

C. RESET

123

456

789

0

+1 0

MENU

MENU

VCRVCR

VCR

VCRVCR

VCR

VCR

VCR

VCR

1 To call up the main menu

1

2 To select an item

2

or

Recording Features

Timer Recording

•Insert a tape with its record tab into the DVD/VCR.

1

1

VCR Functions

2

2

or

3

3

or

4 Select the desired month

4

or

Select the desired day

or

-MENU-

B TIMER PROGRAMMING

AUTO REPEAT [OFF]
CHANNEL SET UP
CLOCK SET
LANGUAGE SELECT

-MENU-

TIMER PROGRAMMING
AUTO REPEAT [OFF]

B CHANNEL SET UP

CLOCK SET
LANGUAGE SELECT

VCR

-MENU-

B TIMER PROGRAMMING

AUTO REPEAT [OFF]
CHANNEL SET UP
CLOCK SET
LANGUAGE SELECT
AUDIO OUT
TV STEREO [ON]
SAP

PROGRAM NUMBER 4
DATE – – / – –
START TIME – – : – – – –
END TIME – – : – – – –
CHANNEL – –
REC SPEED – –

Select an empty program
number

PROGRAM NUMBER 4

B ONCE

DAILY
WEEKLY

Select “ONCE”, “DAILY”
(Mon-Fri), or “WEEKLY”

ONE TIME PROGRAM
PROGRAM NUMBER 4

DATE 0 5 / 0 3 MON
START TIME – – : – – – –
END TIME – – : – – – –
CHANNEL – –
REC SPEED – –

• You can program one
year in advance.

3 To decide

3

CHANNEL SET UP

AUTO SET UP

B MANUAL SET UP

4 To exit the menu

4

OR

5 Select the desired start time

5

(hour)

ONE TIME PROGRAM

or

PROGRAM NUMBER 4
DATE 0 5 / 0 3 MON
START TIME 0 7 : 3 0 – –
END TIME – – : – – – –
CHANNEL – –
REC SPEED – –

Select the minute

or

6

6

or

ONE TIME PROGRAM

PROGRAM NUMBER 4
DATE 0 5 / 0 3 MON
START TIME 0 7 : 3 0 PM
END TIME – – : – – – –
CHANNEL – –
REC SPEED – –

Select “AM” or “PM”

7

Repeat the procedure in steps 5

7

and 6 to set the end time.

8

8

or

•

If you have connected the DVD/VCR to a
cable box or satellite box as the
Connection A on page 6, select the VCR
to channel 3 or 4 (the RF output channel
of the VCR). Then, select the desired
channel at the cable box or satellite box.
Leave the cable box or satellite box on for
timer recording.

ONE TIME PROGRAM
PROGRAM NUMBER 4

DATE 0 5 / 0 3 MON
START TIME 0 7 : 3 0 PM
END TIME 0 8 : 3 0 PM
CHANNEL 1 6
REC SPEED – –

Select the desired channel

–12–

B PM

2

2

1

1

4

4

9

9

or

ONE TIME PROGRAM
PROGRAM NUMBER 4

DATE 0 5 / 0 3 MON
START TIME 0 7 : 3 0 PM
END TIME 0 8 : 3 0 PM
CHANNEL 1 6
REC SPEED SP B SP

3

3

4

4

SLP

Select the desired recording speed

• To set another program after step [9], press the

B

button. Then, continue with step [2].

10

10

• light on the front panel appears.
The DVD/VCR will change to the DVD mode.

Tips

Tips

• To go back one step, press the sbutton (during
the steps [3] to [9].)

AM

To Check, Correct, or Cancel a
Timer Program

CLEAR/

C. RESET

SUBTITLE

T-SET

1) Press the SUBTITLE/T-SET button
then, the VCR button on the remote
control.

2) Select main menu by pressing the
MENU button.

3) Select "TIMER PROGRAMMING"
by pressing the K or L button.

Then, press the B button.

4) Select the program number which
you want to check by pressing the K
or L button. The details of the pro-
gram you selected will appear on
the TV screen.

• Go to the digit you want to change
by pressing the B or s button.
Then, enter correct numbers by
pressing the K or L button.

• You may cancel the entire program
by pressing the s button while the
program number flashes.

5) Press the CLEAR/C.RESET button
to exit.

6) Press the SUBTITLE/T-SET button
to return to timer stand-by mode.

To cancel a Timer Recording in
progress

Press the STOP/EJECT button on
the DVD/VCR.

EN

DIGITAL

AUDIO OUT

COAXIAL

ANT-OUT

ANT-IN

AUDIO
OUT

DVD DVD/VCR VCR

S-VIDEO

OUT

COMPONENT
VIDEO OUT

AUDIO OUT

VIDEO OUT

AUDIO IN

VIDEO IN

L

LY

C

B

C

R

L

RR

ANT-OUT

ANT-IN

VCRDVD/VCR

COMPONENT

VIDEO OUT

AUDIO IN

VIDEO IN

AUDIO OUT

VIDEO OUT

LY

C

B

C

R

L

RR

R

AUDIO OUT

VIDEO OUT

L

R

Connect

1

Audio/Video cables

(supplied)

RF cable

(supplied)

(Back of TV)

(Back of Recording DVD/VCR*)

(Back of another source)

or

2

Connect

*Front input jacks are also available

MENU

MENU

CLEAR/

C. RESET

STEREO

Your Selection

Type of recorded tape

non Hi-Fi tapes

Hi-Fi tapes
recorded in
Hi-Fi stereo

Hi-Fi tapes

recorded second

audio program

Hi-Fi tapes

recorded main
audio program

MONO

Monaural

L+R

Main audio

program

Second audio

program

Monaural

R-channelL-channel

R

Main audio

program

Second audio

program

Monaural

L

Main audio

program

Second audio

program

CLEAR/

C. RESET

VCRVCR

VCR

VCRVCR

VCR

VCR

VCR

Tips for Timer Recording

• If there is a power failure or the DVD/VCR has been unplugged for more than 30 seconds, the clock setting and all timer settings will be lost.

• If a tape is not in the DVD/VCR or does not have the record tab, the light flashes and timer recording cannot be performed. Please
insert a recordable tape.

• If a tape ends during timer recording, the VCR will stop, eject the tape, and switch to the DVD mode automatically as the light flashes.
(If the DVD power is off, the VCR will become STANDBY status).

• When all timer recordings are finished, the light will flash.

• When timer recordings are set, the light will appears. To use the VCR as usual until the time for the recording, press the SUBTITLE/T­SET button so that the light disappears. Press the VCR/TV button to choose the VCR position. Select either VCR or DVD mode, then
continue with the other features as described in this manual.

If you want to use the DVD player during a VCR timer recording or while the light is on or flashes.

• You can use the DVD player while the light is on or flashes, or during a timer recording. Press the POWER button to turn on the DVD.
Press the DVD button on the remote control to choose DVD mode, then continue with the other DVD features as described in this manu­al. You don’t have to set the TIMER off to use the DVD only.

Copying a Video Tape

Warning: Unauthorized recordings of copyrighted video tapes may be an infringement of copyright laws.

1) Insert a pre-recorded tape into the playing VCR.

2) Insert a tape with its record tab into the recording
DVD/VCR.

the SPEED button on the remote control of the

recording DVD/VCR to select the desired recording
speed (SP/SLP).

Select the "L1" or "L2" position on the recording DVD/VCR.

•

To use the input jacks on the back of this unit, select
"L1" position by pressing [0], [0], [1] on the remote
control or the CHANNEL buttons.

• To use the input jacks on the front of this unit, select

"L2" position by pressing [0], [0], [2] on the remote
control or the CHANNEL buttons.

the REC/OTR button on the recording DVD/VCR.

another source

.

STOP/EJECT button on

the recording DVD/VCR, then stop playback of the tape
in

another source

.

Tips

Tips

• For best results during dubbing, use the front panel controls whenever possible. The
remote control might affect another source’s operation.

• Always use video-quality shielded cables with RCA-type connectors. Standard audio
cables are not recommended.

• You can use a video disc player, satellite receiver, or other audio/video component with
A/V outputs.

• “L1” or “L2” is found before the lowest memorized channel. (Example: CH02)

• “L2” input jacks are on the front of this DVD/VCR.

3) Press

4)

5) Press

6) Begin playback of the tape in

7) To stop recording, press the

MTS System (Multi-Channel Television Sound)

When You Receive or Record a
Program Broadcast in MTS

• When you receive a broadcast on
the VCR, you can check the type
of the broadcast by pressing the
DISPLAY button.

• When "TV STEREO" or "SAP"
selection is valid, select them by
following steps.This selection is
needed when you record the pro­gram.

• SAP means Second Audio
Program (usually second lan­guage).

Display on the

TV screen

-None-

STEREO

SAP

STEREO

SAP

Type of

broadcast

Regular

(monaural audio)

Stereo

broadcast

Bilingual

broadcast

Stereo &
Bilingual

broadcast

STEREO/SAP

Selection

-Invalid-

-Invalid-

TV STEREO

(main audio program)

SAP

(second audio program)

TV STEREO

(stereo main audio program)

SAP

(second audio program)

VCR

1

1

TIMER PROGRAMMING
AUTO REPEAT [OFF]
CHANNEL SET UP
CLOCK SET
LANGUAGE SELECT
AUDIO OUT

or

2 To exit the menu.

2

B TV STEREO [ON]

SAP

Select “TV STEREO” or
“SAP”

When You Play Back a Tape
Recorded in Hi-Fi Stereo

• If you have connected a stereo TV to
this DVD/VCR, select "STEREO".

• If you have connected a monaural TV
to this DVD/VCR, select "MONO".

–13–

-MENU-

VCR

1

1

or

2

2

or

TIMER PROGRAMMING
AUTO REPEAT [OFF]
CHANNEL SET UP
CLOCK SET
LANGUAGE SELECT

B AU DIO OUT

TV STEREO [ON]
SAP

B HIFI [ON]

MONO

Select “HIFI” or “MONO”

3 To exit the menu.

3

VCR Functions

-MENU-

AUDIO OUT

EN

Special Features

VCRVCR

VCRVCR

VCR

SEARCH

MODE

MENU

VCRVCR

VCRVCR

VCR

Pro.1 Pro.2 Pro.3 Pro.4 Pro.5

02 01 01 02 03

Beginning
of tape

End
of tape

CURRENT PROGRAM

INDEX MARK

SEARCH

MODE

VCRVCR

VCRVCR

VCR

Time Search Index Search Auto Repeat

You can specify the time for fast
forwarding or rewinding.

• Insert a tape into this unit.

You can specify the number of pro­grams to be skipped.

• Insert a tape into this unit.

You can repeat playback of a
whole tape automatically.

• Insert a tape into this unit.

1

1

TIME SEARCH

– : – –

x2 (Twice)

2 Select the desired length of

2

time for fast forwarding or
rewinding

TIME SEARCH

or

2 : 5 0

VCR Functions

(1 minute~9 hours
and 59 minutes)

To rewind To fast forward

3

3

After searching,

4

4

PLAYB

0:01~ 9:59

1

1

INDEX SEARCH

– –

x1 (Once)

2

2

or

INDEX SEARCH

0 3

01 ~ 20

To rewind To fast forward

3

3

After searching,

4

4

Tips

Tips

• This unit stores index mark at the beginning of
the recording. There should be time gap between
two index marks for the Index Search.

PLAYB

1

1

or

2

2

3

3

Tips

Tips

• To cancel Auto Repeat, follow steps [1]-[2] above.
Then, press the Bbutton, so that [OFF] appears
beside AUTO REPEAT. Press the
CLEAR/C.RESET button to exit.

• If menu remains on the TV screen at step [3],
press the CLEAR/C.RESET button to exit.

AUTO REPEAT B

-MENU-

TIMER PROGRAMMING

B AU TO REPEAT [OFF]

CHANNEL SET UP
CLOCK SET
LANGUAGE SELECT
AUDIO OUT
TV STEREO [ON]
SAP

-MENU-

TIMER PROGRAMMING

B AU TO REPEAT [ON]

CHANNEL SET UP
CLOCK SET
LANGUAGE SELECT
AUDIO OUT
TV STEREO [ON]
SAP

Tips f

Tips f

• These functions are not available during recording.

• Press the STOP button to stop the search.

• If the end of the tape is reached during a Search, this unit will cancel the search and rewind the tape.

or

or

Timer Searcc

Timer Sear

h & Inde

h & Inde

x Searcchh

x Sear

–14–

EN

DVD-V

DVD-V

MP3MP3

MP3

CDCDCDDVD-V

DVD-V

CHANNEL

DVD

STOP

OUTPUT

DVD

OPEN/CLOSE

PLAYSTOP/EJECT PLAY REC/OTR

VCR

POWER

F.FWDREW

E

O

-- A
U

D

IO

--

L

R

/

POWER

DISPLAY VCR DVD PAUSE

SLOW

VCR/TV

SKIP/CH.

PLAY

STOP

REC/OTR

OPEN/CLOSE

/EJECT

SPEED AUDIO

123

456

789

0

+1 0

TV Screen

PLAY

DVD Functions

STOP

OPEN/CLOSE

/EJECT

POWER

OPEN/CLOSE

/EJECT

DVD-V

DVD-V

MP3MP3

MP3

CDCDCDDVD-V

DVD-V

MP3MP3

MP3

CDCDCDDVD-V

DVD-V

DVD

MP3MP3

MP3

CDCDCDDVD-V

DVD-V

DVD-V

DVD-V

Playback

Tu rn on the TV, amplifier and any other components which are
connected to this unit. Make sure the TV and audio receiver (com­mercially available) are set to the correct channel.

(

1

1

3

3

5

5

2

2

4

4

⇒p.16

)

Tips

Tips

• When you play an MP3

1

1

1

1

3

3

4

4

2

2

file, details on page 16.

•A “prohibited icon” may

5

5

appear at the
top-right on
the TV
screen when the opera­tion is prohibited by the
disc or this unit.

• Some DVDs may be
played from title 2 or 3
due to specific pro­grams.

• During the playback of a
two-layered disc, pic­tures may stop for a
moment. This happens
while the 1st layer is
being switched to the
2nd layer. This is not a
malfunction.

1

1

DVD menu

DVDs may contain menus to access special features. Press
appropriate Number buttons or use the arrow (K/L/s/B)
buttons to highlight your selection on the DVD main menu
and press the ENTER button to confirm.

Calling up a Menu Screen during Playback

• Press the MENU button to call up the DVD menu.

• Press the TOP MENU button to call up the title menu.

Note

• Menu operations may vary depending on the disc. Refer to

the manual accompanying the disc for details.

Resume

Press the STOP button. Resume message will appear on
the TV screen.

Press the PLAY button, play­back will resume from the
point at which playback was
stopped.

• To cancel resume, press the

STOP button one more time
during the Stop mode.

• For MP3, playback will resume from the beginning of the

track at which playback was stopped.

Press 'PLAY' to play from here.
To play the beginning,
press 'STOP' first and then 'PLAY'.

Paused and Step-by-Step Playback

1

1

5

5

3

4

3

4

Fast Forward/Reverse Search

Press the ggor hhbutton repeatedly dur-
ing playback to select the required forward or

reverse speed.

o contin

TTo contin

utton.

bbutton.

• For DVDs, fast forward or reverse search speed is different

ue pla

ue pla

yback,k,

ybac

press the PLAYY

press the PLA

depending on the disc. Approximate speed is
1(x2),2(x8),3(x50),4(x100).

• For Audio CDs, approximate speed is x16.

• For MP3, approximate speed is x8.

E

1

Slow Forward/Slow Reverse

Press the ggor hhbutton repeatedly dur-
ing the pause mode to select the required for-

ward or reverse speed.

o contin

TTo contin

utton.

bbutton.

• Slow forward or reverse speed is different depending on

ue pla

ue pla

yback,k,

ybac

press the PLAYY

press the PLA

the disc. Approximate speed is 1(1/16),2(1/8),3(1/2).

Tips

Tips

•Set “STILL MODE” to “FIELD” in the Display menu if pictures in the slow play­back mode are blurred. (Refer to page 21.)

1

Zoom

DVD Functions

Press the PAUSE button during playback.

o contin

TTo contin

utton.

bbutton.

ue pla

ue pla

yback,k,

ybac

press the PLAYY

press the PLA

The disc goes forward by one frame each time the PAUSE
button is pressed during the pause mode.

o contin

TTo contin

Tips

Tips

•Set “STILL MODE” to “FIELD” in the Display menu if pictures in the pause
mode are blurred. (Refer to page 21.)

ue pla

ue pla

yback,k,

ybac

press the PLA

press the PLA

Y b

Y b

utton.

utton.

1) Press the ZOOM button during playback.

2) Press the ZOOM button repeatedly to select the

required zoom factor: x2, x4 or OFF.

3) Use the arrow (KK/LL/ss/BB) buttons to slide the zoomed

picture across the screen.

4) To exit zoom mode, press the ZOOM button to select

“OFF”.

TIPS:

• Zooming function does not work while the disc menu is

showing up.

• x4 zoom is not available on some discs.

–15–

EN

STOP

MP3 Playback

DVD

MP3MP3

MP3

folder name 4

folder name 1

folder name 3

folder name 2

folder name 1

DISC NAME

FILE LIST

FOLDER
MP3

ENTER

PLAY

file name 3

file name 2

file name 1

1/2

ENTERENTERENTER

MENU

DVD

DVD-V

DVD-V

DVD

CDCD

CD

4/12 0:03:21 - 0:02:15

T

4/12 0:13:45 - 0:45:40

T

DISPLAY

DISPLAY

DISPLAY

DISPLAY

DISPLAY

11/16 0:00:00 - 0:03:30

1/3 0:00:00 - 1:23:45

TL1

DISPLAY

DVD

MP3MP3

MP3

TRACK 01

1/36 0:01:15

T

DISPLAY

DISPLAY

DISPLAY

DISPLAY

3

MP3 is a method of compressing files.You can copy MP3 files on CD-R/RWs from the computer and play the files on this unit.

2

2

Insert a MP3-format disc, then press
the MENU button to call up the MP3
menu on the TV screen.

Tips

1

1

When selecting the folder:

• Press the

• Press the

B button when you
want to go to the next hierar­chy.

s button when you
want to go back to the previ­ous hierarchy.

Tips

• Some selections may take a while to be recognized.

• Press the TOP MENU button to return to the first item.

• Folders are known as Groups; files are known as Tracks.

• MP3 files are accompanied by icon.

• Folders are accompanied by icon.

• A maximum of 255 folders can be recognized.

• A maximum of 512 files can be recognized.

• Up to 8 hierarchies can be created.
This DVD/VCR recommends the files recorded under the following circumstances:

• Sampling frequency: 44.1kHz or 48kHz

• Constant bit rate: 112kbps ~ 320kbps.

The On-Screen Display

You can check the information about the current disc by pressing the DISPLAY button on the remote control.

DVD Functions

Current playback status

Remaining time of the current chapter
Elapsed time of the current chapter
CH(Chapter):

Current chapter number / Total chapters

Remaining time of the current title
Elapsed time of the current title
TT(Title):

Current title number / Total titles

Layer numbers, appears only when playing
a two-layered Disc
L0: Layer 0 is playing
L1: Layer 1 is playing

Current repeat setting appears only when
the repeat setting is active

C: Chapter repeat / T: Title repeat /

AB:A-B repeat
BIT RATE: The amount of audio and video

data currently being read

Current playback status

Remaining time of the current track
Elapsed time of the current track

TR(Track):
Current track number / Total tracks

ALL:
Current track number / Total tracks

Current repeat setting appears only when
the repeat setting is active

T: Track repeat
A: All Tracks repeat

AB:A-B repeat
Remaining time of the current audio CD
Elapsed time of the current audio CD

Current playback status

The name of the file currently in play
will be displayed.

TR(Track):
Current Track number / Total Tracks

Current Repeat setting, if active

T: Track repeat
G: Group (folder) repeat
A: Disc repeat

Elapsed playing time of the current track

–16–

EN

Search Function

DVD

CDCDCDDVD-V

DVD-V

1:29:00

TOTAL

1:29:00

TOTAL

SEARCH

MODE

PLAY

123

456

789

0

DVD

CDCDCDDVD-V

DVD-V

SEARCH

MODE

ENTERENTERENTER

SEARCH

MODE

PLAY

ENTERENTERENTER

RETURN

PLAY

DVD

MP3MP3

MP3

CDCD

CD

/29

/29

/29

DVD

DVD-V

DVD-V

/12

/12

123

456

789

0

+1 0

SEARCH

MODE

SEARCH

MODE

123

456

789

0

+1 0

123

456

789

0

+1 0

PLAY

TR 1 TR 2 TR 3 TR 4

Current Track

(TR)

SKIP SKIP

SKIP/CH.

PLAY

CH 1 CH 2 CH 3 CH 4

Current Chapter

(CH)

SKIP SKIP

SKIP/CH.

Track Search

Using the n

Using the n

1

1

•For single digit tracks (1-9), press a
single number (eg. track 3, press 3).

•To play track 26, press +10, 2, 6 of the
Number buttons.

Using the SEARCH

Using the SEARCH

1

1

2

2

Using the SKIP

Using the SKIP

1

1

umber b

umber b

Within 30 seconds

HH

HH

uttons

uttons

MODEbb

MODE

GG

,

uttons

GG

,

bbuttons

utton

utton

Title / Chapter Search

Using the SEARCH

Using the SEARCH

1

1

x1(Press once) for the chapter search
x2 (Press twice) for the title search

2

2

Using the SKIP

Using the SKIP

1

1

Note

¡Depending on the disc being played,

this function can also be performed by
directly entering the desired chapter
number with the number buttons.
Refer to the manual accompanying
the disc.

MODEbb

MODE

Within 30 seconds

HH

GG

,

,

GG

uttons

bbuttons

HH

utton

utton

Time Search

1

1

x repeatedly until this
screen appears

2

2

Within 30 seconds

•e.g. When there is no need to enter a
number, “0” appears automatically. For
example, “0:0_:_ _” appears in the
Time Search display if the total time
of the disc is less than 10 minutes.

Marker Setup

This feature allows you to assign a specific
point on a disc to be called back later.

o set a marker

TTo set a marker

1

1

2

2

or

3

3

x repeatedly until this
screen appears

o return to the marker

TTo return to the marker

later

later

1

1

x repeatedly until this
screen appears

2

2

or

3

3

at the desired marker

•Playback will restart from the specific point
which you set.

–17–

o e

xit the marker screen

TTo e

xit the marker screen

1

1

Notes

¡Opening the disc tray or turning off the

power will erase all markers.

¡Selecting “AC” at step [2] in the sec-

tion “To set a marker” will also erase
all markers.

¡To clear a marker, select the marker to

be cleared at step [2] in the section
“To return to the marker later,” and
then press the CLEAR/C.RESET but­ton.

EN

DVD Functions

Repeat / Random / Programmed Playback

DVD-V

DVD-V

DVD

MP3MP3

MP3

CDCDCDDVD-V

DVD-V

DVD

CDCDCDDVD-V

DVD-V

DVD

MP3MP3

MP3

CDCD

CD

REPEAT

PLAY

CDCD

CD

MP3MP3

MP3

A-B

PLAY

A-

A-B

A-B

MODE

STOP

ENTERENTERENTER

PLAY

DVD

MP3MP3

MP3

CDCD

CD

MODE

STOP

PLAY

CD-DA TOTAL 0:00:00

ENTER

ALL CLEAR

8 3:30

8 3:30

9 2:30

10 1:30

ENTER

Repeat Playback Programmed Playback

Repeat function is available only during playback.

1

1

Each time the REPEAT button is pressed...

CHAPTER

TITLE

OFF

TRACK

ALL

OFF

TRACK

DVD Functions

GROUP

ALL

OFF

¡Repeat setting will be cleared when

moving to another title, chapter, or
track.

¡Repeat playback are not available

with all discs or during repeat A-B
playback.

(current chapter repeat)

(current title repeat)

(repeat

(current track repeat)

(

entire disc repeat)

(repeat

(current track repeat)

(

current group repeat)

(

entire disc repeat)

(repeat

off)

off)

off)

Repeat A-B Playback

1

1

at your desired starting point (A).

2

2

at your desired end point (B).

¡Point B should be in the same title

or track as point A is.

¡To exit the sequence, press the A-B

button.

¡To cancel Point A, press the

CLEAR/C.RESET button.

¡This function does not work in the

other repeat modes.

Random Playback

This shuffles the playing order of tracks
instead of playback in the sequence.

1

1

RANDOM

CD-DA TOTAL 0:45:55

PLAY

RANDOM PROGRAM

--no indication--

x2 (Press twice)

2

2

Note

¡If you want to repeat the current

track in the random selections,
press the REPEAT button repeat­edly until TRACK appears dur­ing playback. If you want to repeat
the entire random selections,
press the REPEAT button repeat­edly until ALL appears during
playback.

–18–

You may determine the order in which
tracks will play.

1

1

x1 (Press once)

2

2

ENTER

press the

press the

CD-DA TOTAL 0:08:00

8 3:30
9 2:30
10 1:30

ALL CLEAR

2/2

8 3:30

B button.

s button.

or

ENTER

ENTER

3

3

Up to 99 programs can be
stored.

While a MP3 folder is open:

• For the next hierarchy,

• For the previous hierarchy,

Notes

¡Press the CLEAR/C.RESET but-

ton at step [2] to erase the most
recently entered program.

¡To erase all programs at once,

select “ALL CLEAR’’ and press
the ENTER button at step [2].

¡While a program is being played

back, the STOP button works as
follows;

⇒

Press the STOP button and the
PLAY button next, so that the pro­grammed playback restarts. (CD
playback restarts from the current
point. MP3 playback restarts from
the beginning of the current track.)

⇒

Press the STOP button twice and
the PLAY button next, so that play­back restarts from the first track in
the original order. However, your
programmed playback can be
restarted when you follow the
above steps. (Your programs are
still stored until either the disc tray
is open or power is turned off.)

¡To repeat the current track in the

program, press the REPEAT but­ton repeatedly until “ TRACK’’
appears during playback.

¡

To repeat the entire program press
the REPEAT button repeatedly until
“ ALL’’ appears during playback.

EN