Fujitsu Tx200-s3 User Manual

®

System Configuration and Order-information Guide

TX200 S3

March 2008

PRIMERGY TX200 S3

Front View

Back View

5 inch Bay

CD-ROM Drive

Floppy Disk Drive

Hard Disk Bay

In case that Power Supply Conversion
kit (PGBRSU104) is applied.

Mouse
Keyboard

Serial Port

Display
10/100BASE-TX Connector
(for Remote Management Controller)

10/100/1000BASE-T Connector

Parallel Port (optional)

PCI Slot

Inside View

Power Supply
DIMM Slot

CPU

5 inch Bay

front side

Hard Disk Bay
System Fan

PCI Slot

OrAnd

PRIMERGY TX200 S3

Instruction

This document contains basic product and configuration information that will enable you
to configure your system.

Only these tools will ensure a fast and proper configuration of your PRIMERGY server or your complete
PRIMERGY Rack system.

You can configure your individual PRIMERGY servers in order to meet your specific requirements.

Please follow the lines. If there is a junction, you can choose which way or component
you would like to take.
Go through the configurator by following the lines from the top to the bottom.

The color of the junction means as follows.

Key to

A

)

t

t

t

t

(

A

(

)

)

)

)

)

r

)

)

)

)

)

)

)

)

)

)

A

(

)

)

y

)

)

)

(

)

)

(

)

)

)

)

)

)

)

)

3

2

A

)

*

*

*

3

*

*

//

/

*

*

*

*

*

*

f

*

f

*

*

*

*

)

PRIMERGY TX200 S3

Data Sheet

Type

Base Unit Xeon® 5110 (1.60GHz)
CPU Frequencies

Second-Level-Cache

Front-Side-Bus

Chipset Intel® 5000V
Memory

Graphics Controller incl. Remote Management Controller, VRAM : 1.7MB
Resolution *2 640x480 do

Internal Bays Number of bays6

3.5 inch
HDD 146.8GB (PG-HDB45A) 15krpm, SAS

SAS

Internal Bays 5inch 3 (2 free bays) ( 1 (0 free bay) by applying Internal HDD Unit Bay Conversion kit (PG-BC103)
CD-ROM standard (Max. 24 ATAPI
PCI Slots

RAID Controlle
SAS Controller SAS x 8ports (Installed as standard) (with RAID1 function
Internal FDD 3.5inch (1.44MB/720KB
Network Controller (onboard
Interfaces Display (Analog RGB), Serial Port x 2 (D-SUB 9pins), Parallel Port (optional, D-SUB 25pins)

Server Management Software
Remote Service function

Power supplyVoltage

Redundant Fan optional (hot plug when Power Supply Conversion kit (PGBRSU104) is applied.
Dimensions (mm

Weight Tower : 38kg (max.) / Rackmount: 40kg (max.
Environmental Conditions Temperature10-35°C / Humidity 20-80% (non condensing ）
OS Support *5 Windows Server® 2003 R2, Standard Edition / Windows Server® 2003 R2, Standard Edition

ttached tool (Standard

1. Available memory capacity will be changed by the type of OS. Please find more details in Notes[Memory OS Compatibility List].

2. Resolution is determined by functions of the display monitor and OS.

3. HDD capacity is calculated according to the formulas 1GB=1000

4. Frequency will be changed by the spec of PCI card and number of cards mounted.

5. Drivers for Linux are not attached. Please download and use drivers of the following URL.

6. CPU Conversion kit: Xeon 5110(1.60GHz/4MB) -> Xeon X5355(2.66GHz/2x4MB) (PGBFU405) is available for upgrading to Quad-Core Intel® Xeon® X5355 2.66GHz.

7. CPU Conversion kit: Xeon 5110(1.60GHz/4MB) -> Xeon E5310(1.60GHz/2x4MB) (PGBFU403) is available for upgrading to Quad-Core Intel® Xeon® E5310 1.60GHz.

8. CPU Conversion kit: Xeon 5110(1.60GHz/4MB) -> Xeon 5160(3GHz/4MB) (PGBFU30T2) is available for upgrading to Dual-Core Intel® Xeon® 5160 3GHz.

9. CPU Conversion kit: Xeon 5110(1.60GHz/4MB) -> Xeon 5130(2GHz/4MB) (PGBFU30S2) is available for upgrading to Dual-Core Intel® Xeon® 5130 2GHz.

10. In case that SAS Controller installed as standard is used for RAID configuration, only 2 HDDs of same capacity and same rpm can be connected.

11. There are some notes for Windows 2003 SP2. Please refer to Notes of Support Matrix.

12. Regarding supported kernel versions of Linux, please refer to the following list.

13. Quad-Core Intel® Xeon® X5355 (2.66GHz) / E5310 (1.60GHz) are not included.

14. Total number of cores of CPU(s) should be four or more for using VM (Virtual Machine) function.

15. ServerStart doesn't support Linux.

. Noise level is 37dB. ( Noise level is 47dB when Power Supply Conversion kit (PGBRSU104) is applied.

Multi-Processor 1 (max. 2

1333MHz ( Quad-Core Intel® Xeon® X5355 (2.66GHz) / Dual-Core Intel® Xeon® 5160 (3GHz) / 5130 (2GHz) ) /

1066MHz ( Quad-Core Intel® Xeon® E5310 (1.60GHz) / Dual-Core Intel® Xeon® 5110 (1.60GHz) )

Standard

Maximum *1

800x600 do
1024x768 do
1280x1024 do

vailable HDD *3 73.4GB (PG-HDB75A) 15krpm, SAS

Maximum *3 1.8TB ( 2.4TB by applying Internal HDD Unit Bay Conversion kit (PG-BC103) ) *10

PCI Express (x8) [x8] 1
PCI Express (x4) [x8] 1
PCI-X (64bit/100MHz) [3.3V] *4 2 (1 x Full Size)
PCI (32bit/33MHz) [5.0V] 1 (1 x Full Size
PCI-X (64bit/100MHz) [3.3V] 1 ( SAS Controller occupies one slot.

connector

Power consumption 575W / 2070kJ/h (max.
Redundant power suppl

http:

www.fujitsu.com/global/services/computing/server/ia/driver

http://www.fujitsu.com/downloads/PRMRGY/support-matrix.pd

http://www.fujitsu.com/downloads/PRMRGY/linux-os-kernel-compatibility-list.pd

1GB (512MB ECC DDR2 SDRAM Fully Buffered DIMM x 2, PC2 5300F) (SDDC(Single Device Data Correction) supported)

AC 100-127V (50/60Hz) / AC 200-240V (50/60Hz) x 2 when Power Supply Conversion kit (PGBRSU104) is applied.

Rackmount

Windows Server® 2003 R2, Enterprise Edition / Windows Server® 2003 R2, Enterprise Edition (SP2 *11

Windows Server® 2003, Standard Edition (SP1/SP2 *11) / Windows Server® 2003, Enterprise Edition (SP1/SP2 *11

Windows Server® 2003 R2, Standard x64 Edition / Windows Server® 2003 R2, Standard x64 Edition (SP2 *11

Windows Server® 2003 R2, Enterprise x64 Edition / Windows Server® 2003 R2, Enterprise x64 Edition (SP2 *11

Windows Server® 2003, Standard x64 Edition / Windows Server® 2003, Standard x64 Edition (SP2 *11

Windows Server® 2003, Enterprise x64 Edition / Windows Server® 2003, Enterprise x64 Edition (SP2 *11

Red Hat Enterprise Linux AS (v.3 for x86) *12 *13 / Red Hat Enterprise Linux ES (v.3 for x86) *12 *1

Red Hat Enterprise Linux AS (v.4 for x86) *12 / Red Hat Enterprise Linux ES (v.4 for x86) *1

Red Hat Enterprise Linux AS (v.4 for EM64T) *12 / Red Hat Enterprise Linux ES (v.4 for EM64T) *12

Red Hat Enterprise Linux 5 (for x86) *12 *14 / Red Hat Enterprise Linux 5 (for Intel64) *12 *14

byte and 1TB=10004byte.

Quad-Core Intel® Xeon® X5355 (2.66GHz) *6 / E5310 (1.60GHz) *7 /

Dual-Core Intel® Xeon® 5160 (3GHz) *8 / 5130 (2GHz) *9 / 5110 (1.60GHz)

2x4MB ( Quad-Core Intel® Xeon® X5355 (2.66GHz) / E5310 (1.60GHz) ) /

4MB ( Dual-Core Intel® Xeon® 5160 (3GHz) / 5130(2GHz) / 5110 (1.60GHz) )

16GB (ECC DDR2 SDRAM Fully Buffered DIMM, PC2 5300F)

8 by applying Internal HDD Unit Bay Conversion kit (PG-BC103) ) (hot plug)

Keyboard (PS/2type Mini DIN 6pins), Mouse (PS/2type Mini DIN 6pins

standard (onboard, Remote Management Controller

optional (hot plug when Power Supply Conversion kit (PGBRSU104) is applied.

Tower : 174 (286 incl. protruding parts)(W) x 755 (D) x 474 (H)

when Rack Conversion kit for TX200 S3 (PG-R1CK20/PGBR1CK20) is applied.

: 483 (W) x 700 (750 incl. protruding parts) (D) x 177 (4U) (H)

Windows® 2000 Server (SP4) / Windows® 2000 Advanced Server (SP4

Dual-Processor Tower Server

PGUT2033

16777216 colors
16777216 colors

65536 colors

256 colors

300.0GB (PG-HDB35A) 15krpm, SAS

standard (SAS Controller

1 port (1000BASE-T/100BASE-TX/10BASE-T

USB x 5 (ver. 2.0) (Internal : x 2,External : x 3

ServerView (Standard

1 port (100BASE-TX/10BASE-T

C 100-127V (50/60Hz) / AC 200-240V (50/60Hz) x 1

SP2 *11

ServerStart (Setup Support tool) *15

PRIMERGY TX200 S3

Configuration Diagram

Power Supply Unit
Power Supply Unit

CPU

*2

Xeon®
X5355 (2.66GHz)/
E5310 (1.60GHz)/
5160 (3GHz)/
5130 (2GHz)/
5110 (1.60GHz)

5 inch Bay 3

*1

5 inch Bay 2
5 inch Bay 1

CD-ROM Drive / FDD

Memory

DIMM Slot 3B
DIMM Slot 2B
DIMM Slot 1B
DIMM Slot 3A
DIMM Slot 2A

DIMM Slot 1A

PCI Slots

PCI5 PCI 32bit/33MHz
PCI4 PCI Express (x4)
PCI3 PCI Express (x8)
PCI2 PCI-X 64bit/100MHz *3
PCI1 PCI-X 64bit/100MHz *3
PCI10 PCI-X 64bit/100MHz

*1. By applying Internal HDD Unit Bay Conversion kit (PG-BC103), 5 inch bay x 2 can be converted
to 3.5 inch bay x 2.
When Internal HDD Unit Bay Conversion kit (PG-BC103) is applied, Internal Backup Device
cannot be mounted on 5inch Bay.
*2. By applying Power Supply Conversion kit (PGBRSU104), non-redundant structure (Power Supply x1,
FAN x2) can be converted to redundant structure (Power Supply x2, FAN x6).
*3. Frequency will be changed by the spec of PCI card and number of cards mounted.

Xeon®
X5355 (2.66GHz)/
E5310 (1.60GHz)/
5160 (3GHz)/
5130 (2GHz)/
5110 (1.60GHz)

3.5 inch HDD Bay 6
(hot plug)

3.5 inch HDD Bay 5
(hot plug)

3.5 inch HDD Bay 4
(hot plug)

3.5 inch HDD Bay 3
(hot plug)

3.5 inch HDD Bay 2
(hot plug)

3.5 inch HDD Bay 1
(hot plug)

When Internal HDD Unit Bay Conversion kit (PG­BC103) is applied. ( HDD x 2ports )
Internal Backup Device cannot be mounted
because 5inch Bay x 2 is used by HDDs.

Bay 8

Bay 7

SAS

Hard Disk 3.5inch Bay (hot plug)
Standard Drive Cage　( HDD x 6ports )

Bay 6

SAS

Bay 5

Bay 4

SAS

Bay 3

Bay 2

SAS

Bay 1

*Components installed as standard configuration marked in grey.

Mountable I/O Options

Mount

Priority

SAS Controller
(8ports)

High

SAS RAID Ctrl

Eth. Ctrl 1000-BASE-T Cu
Eth. Ctrl 1x1Gbit PCI

1000-BASE-T
Eth. Ctrl 1000-BASE-SX

Fibre LC
Eth. Ctrl 2x1Gbit PCI-X

1000-BASE-T
RAID Ctrl 2-Channel 128MB

w/ BBU

Low

Fibre Channel Controller

High

Eth. Ctrl 2x1Gbit PCI-E
1000-BASE-T

Eth. Ctrl 1x1Gbit PCI-E
1000-BASE-T

Low

Eth. Ctrl 1x1Gbit PCI-E
1000BASE-SX

Mountable Cards Bus

- PCI-X/64bit #

PG-140F /
PGB140F

PG-140G /
PGB140G

PG-1892 /
PGB1892

PG-1853 /
PGB1853

PG-1882 PCI-X/64bit

PG-1863 PCI-X/64bit - [1] [2] - ­PG-142E3 /

PGB142E3
PG-1281 /

PGB1281
PG-FC202 /

PGBFC202
PG-2861 /

PGB2861
PG-289 /

PGB289
PG-288

PCI-X/64bit

PCI-X/64bit - [1] - - -

PCI-X/64bit -

PCI/32bit

PCI/64bit -

PCI/64bit ­PCI Express

(x4)
PCI Express

(x4)
PCI Express

(x1)
PCI Express

(x4)

1012345

PCI-X PCI Express PCI

64bit/

100MHz

3.3V

-

-

-

- - - [1] [2]

---[1]

---[1]

- - [1] [2]

PCI Slot

64bit/

100MHz *1

-

[1] -

[1] [2] -

[1] [2]

[2] [1] - -

[2] [1] - -SCSI Ctrl U160

-

x8

lanex4lane

Full Height

x8 socket

---

---

-

32bit/

33MHz

5.0V

-

-

[3][1] [2] - -

[3]-

-

[3] 2

[3] 2

[3]

[3]

-

[2]

-

[2] 2

- PCI Express Card

- PCI Express Card

Max No.

of Mount

1

1

2

2

2

2

2

2

2

1

2

3

Remarks

Standard, Internal array1

Internal arraySAS RAID Ctrl

Internal array

* No AFT/ALB Support

External array
Internal/External SCSI

Controller
PCI Express Card

PCI Express Card

* [n] : Installation Priority
* # : standard
* - : cannot be installed
*1.Frequency will be changed by the spec of PCI card and number of cards mounted.

Slot

PRIMERGY TX200 S3

Connection Table

Form factor conversion
(Tower to Rackmount)

CPU

Rack Conversion kit for TX200 S3
(Tower to Rackmount (4U))
PG-R1CK20
PGBR1CK20 (for CTO)

CPU

Max: 2 CPU Processor Xeon X5355 2.66GHz/2x4MB

PG-FG405
PGBFG405 (for CTO)
*. This option is available when CPU Conversion Kit:
Xeon 5110(1.60GHz/4MB) -> Xeon X5355(2.66GHz/2x4MB) (PGBFU405) is applied.

Processor Xeon E5310 1.60GHz/2x4MB
PG-FG403
PGBFG403 (for CTO)
*. This option is available when CPU Conversion Kit:
Xeon 5110(1.60GHz/4MB) -> Xeon E5310(1.60GHz/2x4MB) (PGBFU403) is applied.

Processor Xeon 5160 3GHz/4MB
PG-FG30T
PGBFG30T (for CTO)
*. This option is available when CPU Conversion Kit:
Xeon 5110(1.60GHz/4MB) -> Xeon 5160(3GHz/4MB) (PGBFU30T2) is applied.

Processor Xeon 5130 2GHz/4MB
PG-FG30S
PGBFG30S (for CTO)
*. This option is available when CPU Conversion Kit:
Xeon 5110(1.60GHz/4MB) -> Xeon 5130(2GHz/4MB) (PGBFU30S2) is applied.

Processor Xeon 5110 1.60GHz/4MB
PG-FG30R
PGBFG30R (for CTO)
*. This option is available when the processor of the base unit
is Processor Xeon 5110(1.60GHz/4MB).

*CPU Conversion Kit (available only as a Configure To Order (CTO) option; no separate shipment is possible)

Type Product ID
CPU Conversion Kit:
Xeon 5110(1.60GHz/4MB) Convert the CPU installed as standard in the base unit to the other.

-> Xeon X5355(2.66GHz/2x4MB) (Note: This option can be ordered only as coupled with the base unit.
(for CTO) A separate shipment is not possible.)
CPU Conversion Kit: Dual-Core Intel® Xeon® 5110(1.60GHz/4MB) -> Quad-Core Intel® Xeon® E5310(1.60GHz/2x4MB)
Xeon 5110(1.60GHz/4MB) Convert the CPU installed as standard in the base unit to the other.

-> Xeon E5310(1.60GHz/2x4MB) (Note: This option can be ordered only as coupled with the base unit.
(for CTO) A separate shipment is not possible.)
CPU Conversion Kit: Dual-Core Intel® Xeon® 5110(1.60GHz/4MB) -> Dual-Core Intel® Xeon 5160(3GHz/4MB)
Xeon 5110(1.60GHz/4MB) Convert the CPU installed as standard in the base unit to the other.

-> Xeon 5160(3GHz/4MB) (Note: This option can be ordered only as coupled with the base unit.
(for CTO) A separate shipment is not possible.)
CPU Conversion Kit: Dual-Core Intel® Xeon® 5110(1.60GHz/4MB) -> Dual-Core Intel® Xeon® Xeon 5130(2GHz/4MB)
Xeon 5110(1.60GHz/4MB) Convert the CPU installed as standard in the base unit to the other.

-> Xeon 5130(2GHz/4MB) (Note: This option can be ordered only as coupled with the base unit.
(for CTO) A separate shipment is not possible.)

PGBFU405

PGBFU403

PGBFU30T2

PGBFU30S2

Dual-Core Intel® Xeon® 5110(1.60GHz/4MB) -> Quad-Core Intel® Xeon® X5355(2.66GHz/2x4MB)

PRIMERGY TX200 S3

Memory (PC2 5300F)

Memory

Slot

Memory

Slot

* Notes on installing memory

1. Memory is installed by pairs of FB-DIMMs of the same capacity. Installation of one FB-DIMM or a mixed -capacity pair is impossible.

2. The memory capacities of the slots should be in ascending order in the following sequence:
DIMM slots 1A,1B (Bank 1) -> DIMM slots 2A,2B (Bank 2) -> DIMM slots 3A,3B (Bank 3)

(Available Memory Area)

Windows® 2000 Server (SP4)

Windows® 2000 Advanced

Server (SP4)

Others

Max: 16GB Memory Module-1GB (512MB FB-DIMM x 2)

PG-RM1CE

Standard Memory Module: 1GB (512MB FB-DIMM x 2)

Memory Module-2GB (1GB FB-DIMM x 2)
PG-RM2CE

Memory Module-4GB (2GB FB-DIMM x 2)
PG-RM4CE

Memory Module-8GB (4GB FB-DIMM x 2)
PG-RM8CE

Memory Module Conversion kit (for CTO)

Memory Module Conversion kit-2GB (1GB FB-DIMM x 2)

1GB -> 2GB PGBRU2CE (for CTO)

Memory Module Conversion kit-4GB (2GB FB-DIMM x 2)

Mounted Memory

~3.0GB

4.0GB

~7.0GB

8.0GB

~16.0GB

1GB -> 4GB PGBRU4CE (for CTO)

Available Memory Area

Same as the size of mounted memory
Size of Mounted Memory minus "1.0GB"
Same as the size of mounted memory
Size of Mounted Memory minus "1.0GB"
Same as the size of mounted memory

*. Spare Memory function
In the case of using Spare Memory function, same DIMMs of two or more banks are required to be installed.
Available memory capacity is "installed memory" minus "capacity of Spare Memory ( 1 Bank )".

PRIMERGY TX200 S3

Connecting Internal HDD and Internal Backup Devices

If you would like to order internal HDDs and internal backup devices, please order optional cards/cables according to the following table.

Type of HDD connection

Connection

Standard Drive Cage
(6bays)

SAS /

RAID

RAID

(''1) USB Backup Devices: PG-DT504
(''2) SCSI Wide Backup Devices: PG-LT302/PG-LT201/PGBLT201C1/PG-LT102
(''3) If you order internal backup devices by CTO, SCSI cable is attached with backup devices.

Internal HDD

PCI Bus

When Internal HDD Unit Bay
Conversion kit (PG-BC103) is
applied. (+2bays)

Standard Drive Cage
(6bays)

When Internal HDD Unit Bay
Conversion kit (PG-BC103) is
applied. (+2bays)

SAS / RAID Configuration

Drive Cage

SAS Controller (standard)
*. In case that SAS Controller installed as standard
is used for RAID configuration, only 2 HDDs of same
capacity and same rpm can be connected.

SAS Controller (standard)
*. Only SAS Configuration is supported.

SAS RAID Ctrl (PG-140F/PG-140G)
( SAS Controller (standard) )

SAS RAID Ctrl (PG-140F/PG-140G)
( SAS Controller (standard) )

SAS Controller PG-HDB75A
( installed as standard ) PGBHDB75A (for CTO)

Interface

Internal Backup Devices PRIMERGY TX200 S3

USB (''1) Connection SCSI Wide (''2) Connection

Onboard USB

(internal port)

-

(not connect)

Onboard USB

(internal port)

-

(not connect)

SCSI Card (PG-1281/PGB1281)
SCSI Cable (PG-CBLS025) (''3)

-

(not connect)

SCSI Card (PG-1281/PGB1281)
SCSI Cable (PG-CBLS025) (''3)

-

(not connect)

HDD SAS 15k 73GB hot plug 3.5inch

PCI Bus

*. In case that SAS Controller installed
as standard is used for RAID configuration, HDD SAS 15k 147GB hot plug 3.5inch
only 2 HDDs of same capacity and same Internal HDD Unit Bay PG-HDB45A
rpm can be connected. Conversion kit PGBHDB45A (for CTO)
*. RAID1 configuration can be set. PG-BC103
*. Hot spare disk cannot be set.

RAID Configuration

*. When Internal HDD Unit Bay Conversion kit
SAS RAID Ctrl (PG-BC103) is applied, up to 8 Internal HDDs
(without BBU) can be mounted but internal backup devices
PG-140F cannot be mounted on 5inch Bays.
PGB140F (for CTO)

*. RAID 0/1/5/1+0 configuration can be set.
To set RAID configuration, two or more HDDs
which are same capacity and same rpm
should be connected to SAS Controller
installed as standard.

SAS RAID Ctrl
(with BBU)
PG-140G
PGB140G (for CTO)

HDD SAS 15k 300GB hot plug 3.5inch
PG-HDB35A
PGBHDB35A (for CTO)

*. RAID 0/1/5/1+0 configuration can be set.
To set RAID configuration, two or more HDDs
which are same capacity and same rpm
should be connected to SAS Controller
installed as standard.

PRIMERGY TX200 S3

Internal backup device

PCI Bus

SCSI Ctrl U160 by CTO and can be connected to multiple backup devices. w/ SCSI Cable
PG-1281 *. One internal backup device can be ordered by CTO. PGBLT302C (for CTO)
PGB1281 (for CTO) *. One internal backup device can

*. In case that internal backup device is ordered by CTO,
SCSI Ctrl U160 (PGB1281) should be ordered too.
*. One internal backup device can be ordered by CTO.
*. When internal HDD Unit Bay Coversion kit (PG-BC103) is applied, w/ SCSI Cable
internal backup devices can not be mounted on 5 inch bays. PGBLT102C (for CTO)

Internal backup device (USB)

USB Interface

(internal)

*. One internal backup device(USB) can be ordered by CTO. be mounted.
*. When internal HDD Unit Bay Coversion kit (PG-BC103) is applied,
internal backup devices can not be mounted on 5 inch bays.

( In case that internal backup device is ordered by CTO. )

*. One SCSI cable is attached with backup device ordered Tape Drv LTO3 Ultrium3/Ultrium2 400GB

( In case that internal backup device is ordered without CTO. )

SCSI Cable 1.7m PGBLT201C1 (for CTO)
PG-CBLS025 *. One internal backup device can
*. One SCSI cable can be connected to multiple backup devices. be ordered by CTO.

2 slots / Max: 2

Tape Drv LTO3 Ultrium3/Ultrium2 400GB
PG-LT302

be ordered by CTO.

Tape Drv LTO2 Ultrium2 200GB
PG-LT201
Tape Drv LTO2 Ultrium2 200GB
w/ SCSI Cable

Tape Drv LTO Ultrium1 100GB
PG-LT102
Tape Drv LTO Ultrium1 100GB

*. One internal backup device can
be ordered by CTO.

Tape Drv DAT72 36GB internal
PG-DT504
PGBDT504 (for CTO)
*. One internal backup device can

Internal DVD-RAM

Onboard IDE

Controller

Internal backup device (PRIMERGY SX10)

*PRIMERGY SX10 is available for rack install type.

PCI Bus

SCSI Ctrl U160 SCSI Cable HDCI 1.5m PRIMERGY SX10
PG-1281 PG-CBLS001 PG-R1BC4
PGB1281 (for CTO) SCSI Cable HDCI 5m

*Please find more information on the internal backup devices for PRIMERGY SX10
in Rackmount[Internal Backup Devices with PRIMERGY SX10 ]

Power Supply Units/ Fan (CTO only)

Power Supply Slot/ Fan

PG-CBLS002

DVD-RAM Conversion kit (CD-ROM Drive -> DVD-RAM Drive)
PGBDVAU104 (for CTO)

Power Supply Conversion kit

PGBRSU104 (for CTO)

( non-redundant structure (Power Supply x1, FAN x2)

-> redundant structure (Power Supply x2, FAN x6) )

PRIMERGY TX200 S3

LAN Card (Standard PCI Slot)

PCI Express Bus

PCI Bus

On-board LAN

Eth. Ctrl 2x1Gbit PCI-E 1000-BASE-T
PG-2861
PGB2861 (for CTO)
* Dual Port

Eth. Ctrl 1x1Gbit PCI-E 1000-BASE-T
PG-289
PGB289 (for CTO)

Eth. Ctrl 1x1Gbit PCI-E 1000BASE-SX
PG-288

Eth. Ctrl 2x1Gbit PCI-X 1000-BASE-T
PG-1863
* Dual Port

Eth. Ctrl 1000-BASE-T Cu
PG-1892
PGB1892 (for CTO)

Eth. Ctrl 1x1Gbit PCI 1000-BASE-T
PG-1853
PGB1853 (for CTO)
* No AFT/ALB Support

Twist Pair Cable ( Category 5e)

Multi Mode Fibre Channel Cable

Twist Pair Cable ( Category 5e)

Server Management (Remote Management Controller)

LAN interface for Remote

Management Controller

Parallel Port Option

Back-side Panel

Eth. Ctrl 1000-BASE-SX Fibre LC
PG-1882

Remote Management Ctrl Upgrade kit
PG-RMCU1

Parallel Port Option

PG-PP04

Multi Mode Fibre Channel Cable

Twist Pair Cable ( Category 5e)

Specifications are subject to change without notice. For the latest detailed information, contact your local representative.
All brand names and product names are trademarks and registered trademarks of their respective holders.
©2006 Fujitsu Limited. All rights reserved. Printed in Japan.

Global Business Development & Marketing
Business Strategy & Planning
System Products
URL http://primergy.fujitsu.com