Fujitsu RE19-1 DE, A17-2, A17-2 DVI, A19-1 DVI, A19-1 User Manual
...
Monitor
Operating Manual
English
SCENICVIEW A17-2 / A19-1 / A17-2 DVI / A19-1 DVI / RE17-1 DE / RE19-1 DE
Are there ...
... any technical problems or other questions which you would like to be clarified?
Please contact
our help desk (see Warranty Booklet).
The latest information on our products, tips, updates, etc., can be found on the internet at:
www.fujitsu-siemens.com
This manual was produced by
cognitas. Gesellschaft für Technik-Dokumentation mbH – www.cognitas.de
Published by
Fujitsu Siemens Computers GmbH
Order No.: A26361-K1063-Z121-1-7619
Edition 1
AG 0106 01/06
SCENICVIEW
A17-2 / A19-1 /
A17-2 DVI / A19-1 DVI /
RE17-1 DE / RE19-1 DE
Operating Manual
January 2006 edition
VESA, DDC and DPMS are registered trademarks of Video Electronics Standards
Association.
All rights, including rights of translation, reproduction by printing, copying or similar methods,
in part or in whole, are reserved.
Offenders will be liable for damages.
All rights, including rights created by patent grant or registration of a utility model or design,
are reserved.
Delivery subject to availability. Right of technical modification reserved.
This manual was produced by
cognitas. Gesellschaft für Technik-Dokumentation mbH
www.cognitas.de
Copyright © Fujitsu Siemens Computers GmbH 2006
Contents
Introduction........................................................................................................................................... 1
Notational conventions ................................................................................................................. 2
Important notes..................................................................................................................................... 2
Safety notes.................................................................................................................................. 2
Cleaning ....................................................................................................................................... 3
Transport ...................................................................................................................................... 4
Power cable.................................................................................................................................. 4
Energy Star Guidelines................................................................................................................. 4
CE marking................................................................................................................................... 4
FCC Class B Compliance Statement ........................................................................................... 5
Declaration of Conformity............................................................................................................. 5
Disposal and recycling ................................................................................................................. 6
Checking the contents of the consignment........................................................................................... 6
Installing an ergonomic video workstation............................................................................................ 7
Mounting and removing the monitor base ............................................................................................ 8
Mounting monitor base................................................................................................................. 8
Removing monitor base ............................................................................................................... 9
Connecting the monitor ...................................................................................................................... 10
Connecting cables to the monitor............................................................................................... 10
Connecting cables to the computer............................................................................................ 11
Operation of the monitor..................................................................................................................... 12
Adjusting rake............................................................................................................................. 12
Switching the monitor on/off ....................................................................................................... 12
Notes on power management .................................................................................................... 13
Changing the monitor settings.................................................................................................... 14
Notes on ergonomic colour adjustment.............................................................................................. 19
Troubleshooting.................................................................................................................................. 20
Notes regarding the DIN EN ISO 13406-2 standard .......................................................................... 22
Technical data .................................................................................................................................... 23
VESA-DDC-compatible VGA interface....................................................................................... 24
Preset operating modes ............................................................................................................. 24
Pin assignment D-SUB............................................................................................................... 25
Monitor port DVI-D...................................................................................................................... 25
A26361-K1063-Z121-1-7619, edition 1
Introduction
Your new LCD (Liquid Crystal Display) monitor offers numerous features and functions, for example:
● TFT display (Thin Film Transistor; active matrix)
● minimal space requirements thanks to slim casing
● optimum ergonomic characteristics (totally distortion-free, excellent picture definition and colour
purity right into the corners)
● high degree of brightness and good contrast
● presentation of up to 16.2 million colours (in conjunction with an appropriate graphics card)
● automatic scanning of horizontal frequencies from 31 to 81 kHz and refresh rates (vertical
frequencies) from 56 to 75 Hz (absolutely flicker-free)
● digital screen controller with microprocessor for storing 18 different display modes
● freely adjustable colour alignment for matching the screen colours to the colours of various
input and output devices
● convenient operation via integrated OSD (On-Screen-display) menu
● VESA-DDC compatibility
● VESA-FPMPMI compatibility (Flat Panel Monitor Physical Mounting Interface) - mechanical
interface to swivel arm and wall bracket)
● plug&play capability
● power management for reducing power consumption when the computer is not in use
● compliance with the recommendations in accordance with TCO’03
In normal screen mode (dark characters against a light background) the monitor satisfies the
ergonomic requirements for the GS symbol.
This operating manual contains important information you require to start up and run your LCD
monitor.
A screen controller with VGA interface is required to control the SCENICVIEW A17-2 / A19-1 / A17-2
DVI / A19-1 DVI / RE17-1 DE / RE19-1 DELCD monitor. The monitor processes the data supplied to
it by the screen controller. The screen controller/the associated driver software is responsible for
setting the modes (resolution and refresh rate).
When putting the monitor into operation for the first time, the screen display should be optimally
adapted to the screen controller used and adjusted in accordance with your needs (see Changing
the monitor settings.
Target group
You don't need to be an "expert" to perform the operations described here. Do, however, read the
"Important notes" chapter in the operating manual of the computer and in this operating manual.
In the event of any problems occurring, please contact your sales outlet or our help desk.
Additional information
Details of how you set the resolution and refresh rate are provided in the documentation on your
screen controller/the associated driver software.
A26361-K1063-Z121-1-7619, edition 1 1
Notational conventions
The meanings of the symbols and fonts used in this manual are as follows:
► Text which follows this symbol describes activities that must be performed in the order shown.
"Quotation marks" indicate names of chapters or terms.
Texts in italics indicate filenames and menu items.
Pay particular attention to text marked with this symbol. Failure to observe this warning
endangers your life, destroys the device, or may lead to loss of data.
!
Supplementary information, remarks, and tips follow this symbol.
i
Important notes
In this chapter you will find information regarding safety which is essential to take note of
with your monitor.
!
Safety notes
This device complies with the relevant safety regulations for data processing equipment, including
electronic office machines for use in an office environment. If you have any questions, contact your
sales outlet or our help desk.
● The display surface of the LCD monitor is sensitive to pressure and scratches. You should
therefore be careful with the display surface so as to avoid lasting damage (Newton rings,
scratches).
● If the device is brought into the installation site from a cold environment, condensation can
form. Before operating the device, wait until it is absolutely dry and has reached approximately
the same temperature as the installation site.
● During installation and before operating the device, please observe the instructions on
environmental conditions in the "Technical data" chapter as well as the instructions in the
"Installing an ergonomic video workstation" chapter.
● To ensure sufficient ventilation, the intake and exhaust air openings of the monitor must never
be blocked.
● The monitor automatically sets itself to a mains voltage in the range of 100 V to 240 V. Ensure
that the local mains voltage lies within these limits.
● Ensure that the power socket on the device or the grounded mains outlet is freely accessible.
● The ON/OFF switch does not disconnect the device from the mains voltage. To completely
disconnect the mains voltage, remove the power plug from the socket.
● The monitor is equipped with a power cable that complies with safety standards.
2 A26361-K1063-Z121-1-7619, edition 1
Loading...