FUJITSU MDFP200-EDK DATA SHEET

Fujitsu is offering an embedded fingerprint solution - a stand-alone fingerprint authentication system with built-in Fujitsu MCU. The MDFP200-EDK integrates fingerprint capturing, processing, verification and storage into one system. In addition to the hardware, the user will receive a development environment including fingerprint algorithm libraries.
With this development kit, Fujitsu offers customers a development tool, as well as a sample hardware design for reference. Coming with a complete bill of material, this solution will enable users to save development costs and ensure faster time-to-market for their products.
Features & Advantages
All-in-one solution, saving
development cost and time
Fujitsu’s capacitive fingerprint
sensor ensures stable operation
independent of lighting conditions
and temperature
Efficient fingerprint matching
algorithm, requiring low process
power and small storage space for
templates
Short matching time achieved,
allowing a fast and convenient
authentication
System Specifications
Authentication time for 1:1 matching
- 1 second
Template size per finger
- Approx. 200Bytes
Fingerprint storage capacity
- 100 templates on module
- Can be extended using an external database
Fingerprint sensor
- MBF200: 500dpi resolution
Power Supply
- Variable 5V-12V
Power consumption
- Operating mode = Typ 1000mW
Hardware interface
- RS-232
Operating temperature - 0-70°C
MDFP200-EDK FACTSHEET
EMBEDDED FINGERPRINT DEVELOPMENT KIT
EDK Contents
MDFP200 EDK module stack
Adjustable Power Supply 3-12V
Two 9-pole SUB-D interface cables
User manual including all schematics of the complete sample design and bill of material
Software CD with complete documentations
FME-MDFP200-EDK-1004
MDFP200-EDK FACTSHEET
Technical Details
Hardware
Fujitsu’s CMOS solid-state single­touch fingerprint sensor MBF200
- 500dpi resolution
- 256x300 pixel array
- Rugged super thin design (0,14cm)
Fujitsu FR series 32bit RISC Processor MB91302
- With built-in hardware multiplier and barrel shifter, 4KB of internal instruction cache
- 68MHz internal operating frequency max
- 3 UART interfaces, several GPIOs and 2 I2C interfaces
- 3 reload timers, 4 input capture channels, 4 PPG timers and a watchdog timer
- 5 channel DMA controller, 16 level interrupt controller, 4 channels of 10-bit ADC
- Power saving mode (stop mode and sleep mode)
- 144-pin QFP package
On board memories: 8 MB SDRAM and 2 MB Flash
Application Software
Fingerprint sensor driver library for capturing images, setup and control
IKENDI’s minutia based software library as fingerprint matching engine
- Can be licensed directly from IKENDI
- Code size approx. 100kByte
- Proprietary template format allowing various kinds of system architecture
- Host matching possible
- Match on card possible on
demand
Flash utilities to download new applications and boot monitor
Low memory consumption
- 10% of on board memory is used
Software Design Tool
Fujitsu Softune Workbench for the platform development
- Complete tool chain, compiler, assembler and linker, after online registration
Interface
2 RS-232 9-pin serial port access for downloading, debugging and user application
Relay: max 125V AC, max 28VA, max 1A
Buzzer for acoustic signalisation
LEDs used to display results of the fingerprint enrolment and verification process
Switch buttons to change between Enrol and Verify, demo and development modes
Applications
Point Of Sales
Access Control
Identification systems for public safety
Computer and Network
Time Attendance Management
Fujitsu Microelectronics Europe
France
Fujitsu Microelectronics Europe GmbH 105 rue Jules Guesde F-92300 Levallois Perret Phone: (01) 55 21 00 40 Fax: (01) 55 21 00 41
x
Fujitsu Microelectronics Europe GmbH Am Siebenstein 6-10 D-63303 Dreieich-Buchschlag Phone: (0 61 03) 69 00 Fax: (0 61 03) 69 01 22
Fujitsu Microelectronics Europe GmbH Frankfurter Ring 211 80807 München Phone: (089) 32 37 87 00 Fax: (089) 32 37 87 22
Italy
Fujitsu Microelectronics Europe GmbH Palazzo Pitagora - Milano 3 City Via Ludovico il Moro 4B I-20080 Basiglio, Milano Phone: 02 90 45 02 1 Fax: 02 90 75 00 87
United Kingdom
Fujitsu Microelectronics Europe GmbH Network House, Norreys Drive Maidenhead Berkshire SL6 4FJ Phone: (0 16 28) 50 46 00 Fax: (0 16 28) 50 46 66
Germany
www.fme.fujitsu.com
Loading...