Fuji Electric Frenic-Mini Series Catalog
Compact inverter
COMPACT
INVERTER
FRENIC
Compact
And
High
Perfomance
FUJI ELECTRIC
INVERTER
High Perfomance
Compact Body
Welcome to the
NEXT Generation
of Compact Inverters
S
New
NEXT
Generation!
24A1-E-0011d
High Performance
Fully Compatible
Easy Operation
and
Multipurpose
New Compact Inverter
Get Our Most User-Friendly Inverter yet!
with
Existing Products
High Performance Compact Body.
NEXT Generation!
COMPACT
INVERTER
and
Maintenance
FRENIC
FUJI ELECTRIC INVERTERS
High Perfomance Compact Body.
Welcome to the NEXT Generation of Compact Inverter
With its functionality, compact design, simple operation, and global compatibility,
the new FRENIC-Mini elevates the performance of a wide range of devices and equipment--including conveyors,
fans, pumps, centrifugal separators, and food processing machines--to give you the system integration,
energy efficiency, reduced labor, and lower overall costs you're looking for.
Energy
Efficient
2
Network
Capabilities
Global
Compatibility
High Perfomance Compact Body Welcome to the NEXT Generation of Compact Inverters
High Performance and Multipurpose
FUJI ELECTRIC INVERTERS
200
100
0
Output torque [%]
-100
-200
Full Compatibility and User Friendly Design
Current C1 model New C2 model
120
(4.72)
3Hz
5Hz
10Hz
120
(4.72)
Motor
speed
[r/min]
Dynamic Torque Vector Control System
Fuji Electric original dynamic torque vector control system is known for its
top-of-the line performance, delivering stabile torque output even at low
speeds. This feature has a wide range of applications, including conveyors
and high-inertia loads that demand high starting torque.
Slip Compensation shortens setting time
The slip compensation controller works with voltage tuning for even more
accurate speed control at low velocity. This reduces speed control variability
and stabilizing creep speed for more accurate stopping in conveyors and
similar equipment.
Fastest CPU Processor in its Class
Advanced CPU processes data at twice the speed of our current model
External dimensions
Installed dimensions
Number of terminals
Terminal position
Function codes
RS-485 communication
Interchangeable
Interchangeable
Same for both main circuit and controllers
Compatible terminal wire length
Compatible function codes
Shared communications protocol
FeaturesSpecificationsTerminal FunctionsExternal Dimensions
Note: Three-phase 200V 0.1–0.75kW dimensions shown (mm(inch))
80(3.15) 80(3.15)
Easy Operation and Maintenance
Usability
Delivers all the usability of the C1. Provides volume of frequency
and the same ease of operation as the current model.
Improve Maintainability
Function
Mock malfunction
Number of startups
Cumulative motor running time
Total power
Trip history
Select a function to set off a mock alarm
Count the total number of ON/OFF run cycles
Monitor motor run time
Set to measure total power consumption
Saves and displays information on up to four past trips
Description
USB Keypad
Optional USB keypad available. Enhanced PC loader
software (FRENIC Loader) connectivity.
USB-USB mini-B cable
LAN cable
· FRENIC Loader available as a free download
3
COMPACT INVERTER
Energy Optimization
Optimum Energy Control
Motor tuning minimizes power loss
FRENIC-
Current FRENIC-Mini
Power supply
Optimum
motor control
Way of thinking about the power used
Power supply
PID Control Function
Permits motor operation while controlling temperature,
pressure, and flow rate without the use of a temperature
controller or other external device
Cooling Fan ON/OFF Control Function
The cooling fan can be switched off when the fan or pump is
not running to reduce both noise and energy consumption
Synchronous Motor Control
Use of sensorless synchronous motor control together with
the motor can reduce energy consumption
Optimum control
of overall system
New control system (New FRENIC-Mini)
Network Capabilities Other Features
RS-485 Communications Port as Standard
Communications can be controlled through the standard
RS-485 communications port using the Modbus-RTU or Fuji
Electric inverter protocol
RS-485 Communication Port
Other
Functions for User Applications
V/F (non-linear 3 step)
Two motor parameter sets
Brake signal (brake release signal)
Rotational direction control (prevent forward/reverse movement)
Global Standard
EC Directives (CE making)
UL standard (cUL certification)
4
Variation
FUJI ELECTRIC INVERTERS
High Perfomance Compact Body Welcome to the NEXT Generation of Compact Inverters
Nominal Applied
Motor (kW)[HP]
Standard specifications
Without EMC filter type
0.1 [1/8]
0.2 [1/4]
0.4 [1/2]
0.75 [1]
1.5 [2]
2.2 [3]
3.7 [5]
5.5 [7.5]
7.5 [10]
11 [15]
15 [20]
Destination
Semi-standard specifications
EMC filter built-in type
0.1 [1/8]
0.2 [1/4]
0.4 [1/2]
0.75 [1]
1.5 [2]
2.2 [3]
3.7 [5]
5.5 [7.5]
7.5 [10]
11 [15]
15 [20]
Destination
Three-phase
200V series
FRN0001C2S-2
FRN0002C2S-2
FRN0004C2S-2
FRN0006C2S-2
FRN0010C2S-2
FRN0012C2S-2
FRN0020C2S-2
FRN0025C2S-2
FRN0033C2S-2
FRN0047C2S-2
FRN0060C2S-2
A(Asia), U(USA)
Three-phase
400V series
FRN0001C2S-7
FRN0002C2S-7
FRN0002C2S-4
FRN0004C2S-4
FRN0005C2S-4
FRN0007C2S-4
FRN0011C2S-4
FRN0013C2S-4
FRN0018C2S-4
FRN0024C2S-4
FRN0030C2S-4
A(Asia), C(China), E(Europe), U(USA)
FRN0002C2E-4E
FRN0004C2E-4E
FRN0005C2E-4E
FRN0007C2E-4E
FRN0011C2E-4E
FRN0013C2E-4E
FRN0018C2E-4E
FRN0024C2E-4E
FRN0030C2E-4E
E(Europe)
FRN0004C2S-7
FRN0006C2S-7
FRN0010C2S-7
FRN0012C2S-7
Single-phase
200V series
FRN0001C2E-7E
FRN0002C2E-7E
FRN0004C2E-7E
FRN0006C2E-7E
FRN0010C2E-7E
FRN0012C2E-7E
Single-phase
100V series
FRN0001C2S-6U
FRN0002C2S-6U
FRN0003C2S-6U
FRN0005C2S-6U
U(USA)
FeaturesSpecificationsTerminal FunctionsExternal Dimensions
How To Read Model Number
FRN 0010 C 2 S - 4 A
Code
FRN
Applicable Current Rating
This value shows an amperage rating
CodeCApplication Range
Code
2
Code
S
E
Series Name
FRENIC series
0001〜0060
Compact
Developed Inverter Series
2-series
Enclosure
Standard (IP20) (UL Open Type)
EMC filter built-in type
Caution
The contents of this catalog are provided to help you select the product model that is best for you. Before actual use, be sure to read the User’s Manual
thoroughly to assure correct operation.
Code
A
C
E
U
Code
2
4
6
7
Destination/Manual
Asia/English
China/Chinese
Europe/English
USA/English
Input Power Source
Three-phase 200V
Three-phase 400V
Single-phase 100V
Single-phase 200V
5
COMPACT INVERTER
FRENIC-
Standard Model
Specifications
Three-phase 200V series
Item Specifications
Input power source
Type
(FRN C2S-2 , =A, U)
Nominal applied motor[kW]( =A)
Nominal applied motor[HP]( =U)
Rated capacity[kVA]
Rated voltage[V]
Rated current[A](*1)
Overload capability
Output ratingsInput ratingsBraking
Rated frequency[Hz]
Phases, Voltage, Frequency
Voltage/Frequency variations
Rated current[A]
Required power supply capacity[kVA]
Torque[%]
DC injection braking
Braking transistor
Applicable safety standards
Enclosure (IEC 60529)
Cooling method
Weight / Mass[kg(Ibs)]
*1
The load shall be reduced so that the continuous operating current is the rated current in parenthesis or less if the carrier frequency is set to 3kHz or above or ambient temperature exceeds 40℃ (104℉).
(with DCR)
(without DCR)
Three-phase 200V
FRN C2S-2A, FRN C2S-2U
0001
0.1
1/8
0.30
Three-phase 200 to 240V (With AVR)
0.8(0.7)
150% of rated current for 1min
150% of rated current for 1min or 200% of rated current for 0.5s (If the rated current is in parenthesis)
50, 60Hz
Three-phase, 200 to 240V, 50/60Hz
Voltage: +10 to -15% (Voltage unbalance : 2% or less), Frequency: +5 to -5%
0.57
1.1
0.2
150
Starting frequency: 0.0 to 60.0Hz, Braking time: 0.0 to 30.0s Braking level: 0 to 100%
−
UL508C, EN 61800-5-1:2007
IP20 (IEC 60529:1989) / UL open type (UL50)
Natural cooling
0.6(1.3)
0002
0.2
1/4
0.57
1.5(1.4)
0.93
1.8
0.3
0.6(1.3)
0004
0.4
1/2
1.3
3.5(2.5)
1.6
3.1
0.6
100
Built-in
0.7(1.5)
0006
0.75
1
2.0
5.5(4.2)
3.0
5.3
1.1
0.8(1.8)
0010
1.5
2
3.5
9.2(7.0)
5.7
9.5
2.0
50
Fan cooling
1.7(3.7)
0012
2.2
3
4.5
12.0(10.0)
8.3
13.2
2.9
30
1.7(3.7)
0020
3.7
5
7.2
19.1(16.5)
14.0
22.2
4.9
2.5(5.5)
0025
5.5
7.5
9.5
25.0(23.5)
150% of rated current for 1min or
200% of rated current for 0.5s
21.1
31.5
7.4
20
3.1(6.8)
0033
7.5
10
12
33.0(31.0)
28.8
42.7
10
3.1(6.8)
0047
11
15
17
47.0(44.0)
42.2
60.7
15
4.5(9.8)
0060
15
20
22
60.0(57.0)
57.6
80.0
20
4.5(9.8)
Three-phase 400V series
Item Specifications
Input power source
Type
(FRN C2S-4 , =A, C, E, U)
Nominal applied motor[kW]
( =A, C, E)
Nominal applied motor[HP]( =U)
Rated capacity[kVA]
Rated voltage[V]
Rated current[A](*1)
Overload capability
Output ratingsInput ratingsBraking
Rated frequency[Hz]
Phases, Voltage, Frequency
Voltage/Frequency variations
Rated current[A]
Required power supply capacity[kVA]
Torque[%]
DC injection braking
Braking transistor
Applicable safety standards
Enclosure (IEC 60529)
Cooling method
Weight / Mass[kg(Ibs)]
*1
The load shall be reduced so that the continuous operating current is the rated current in parenthesis or less if the carrier frequency is set to 3kHz or above or ambient temperature exceeds 40℃ (104℉).
(with DCR)
(without DCR)
Three-phase 400V
FRN C2S-4A, FRN C2S-4C
FRN C2S-4E, FRN C2S-4U
0002
0.4
1/2
1.3
Three-phase 380 to 480V (With AVR)
1.8(1.5)
150% of rated current for 1min
150% of rated current for 1min or 200% of rated current for 0.5s (If the rated current is in parenthesis)
50, 60Hz
Three-phase, 380 to 480V, 50/60Hz
Voltage: +10 to -15% (Voltage unbalance : 2% or less), Frequency: +5 to -5%
0.85
1.7
0.6
100
Starting frequency: 0.0 to 60.0Hz, Braking time: 0.0 to 30.0s Braking level: 0 to 100%
Built-in
UL508C, EN 61800-5-1:2007
IP20 (IEC 60529:1989) / UL open type (UL50)
Natural cooling
1.2(2.6)
0004
0.75
1
2.3
3.1(2.5)
1.6
3.1
1.1
1.3(2.9)
0005
1.5
2
3.2
4.3(3.7)
3.0
5.9
2.0
50
Fan cooling
1.7(3.7)
0007
2.2
3
4.8
6.3(5.5)
4.4
8.2
2.9
30
1.7(3.7)
0011
3.7( =A, C)
4.0( =E)
5
8.0
10.5(9.0)
7.3
13.0
4.9
2.5(5.5)
0013
5.5
7.5
9.9
13.0
150% of rated current for 1min or
200% of rated current for 0.5s
10.6
17.3
7.4
20
3.1(6.8)
0018
7.5
10
13
18.0
14.4
23.2
10
3.1(6.8)
0024
11
15
18
24.0
21.1
33.0
15
4.5(9.8)
0030
15
20
22
30.0
28.8
43.8
20
4.5(9.8)
6
FUJI ELECTRIC INVERTERS
High Perfomance Compact Body Welcome to the NEXT Generation of Compact Inverters
Specifications
Single-phase 200V/100V series
Item Specifications
Input power source
Type
(FRN C2S- , =A, C, E, U)
Nominal applied motor[kW]
( =A, C, E)
Nominal applied motor[HP]( =U)
Rated capacity[kVA]
Rated voltage[V]
Rated current[A](*1)
Overload capability
Output ratingsInput ratingsBraking
Rated frequency[Hz]
Phases, Voltage, Frequency
Voltage/Frequency variations
Rated current[A]
Required power supply capacity[kVA]
Torque[%]
DC injection braking
Braking transistor
Applicable safety standards
Enclosure (IEC 60529)
Cooling method
Weight / Mass[kg(Ibs)]
*1
The load shall be reduced so that the continuous operating current is the rated current in parenthesis or less if the carrier frequency is set to 3kHz or above or ambient temperature exceeds 40℃ (104℉).
(with DCR)
(without DCR)
Single-phase 200V
FRN C2S-7A, FRN C2S-7C
FRN C2S-7E, FRN C2S-7U
0001
0.1
1/8
0.30
Three-phase 200 to 240V (With AVR)
0.8(0.7)
150% of rated current for 1min
150% of rated current for 1min or 200% of rated current for 0.5s (If the rated current is in parenthesis)
50, 60Hz
Single-phase, 200 to 240V, 50/60Hz
Voltage: +10 to -10%, Frequency: +5 to -5%
1.1
1.8
0.3
150
Starting frequency: 0.0 to 60.0Hz, Braking time: 0.0 to 30.0s, Braking level: 0 to 100%
−
UL508C, EN 61800-5-1:2007
IP20 (IEC 60529:1989) / UL open type (UL50)
Natural cooling
0.6(1.3)
0002
0.2
1/4
0.57
1.5(1.4)
2.0
3.3
0.4
0.6(1.3)
0004
0.4
1/2
1.3
3.5(2.5)
3.5
5.4
0.7
100
Built-in
0.7(1.5)
0006
0.75
1
2.0
5.5(4.2)
6.4
9.7
1.3
0.9(2)
0010
1.5
2
3.5
9.2(7.0)
11.6
16.4
2.4
50
Fan cooling
1.8(4)
0012
2.2
3
4.5
12.0(10.0)
17.5
24.0
3.5
30
2.5(5.5)
Single-phase 100V
FRN C2S-6U
0001
0.1
1/8
0.26
0.7
150% of rated current for 1min
or 200% of rated current for 0.5s
Single-phase 100 to 120V, 50/60Hz
2.2
3.6
0.3
150
−
UL508C
Natural cooling
0.7(1.5)
0002
0.2
1/4
0.53
1.4
3.8
5.9
0.5
0.7(1.5)
0003
0.4
1/2
0.95
2.5
6.4
9.5
0.7
100
Built-in
0.8(1.8)
0005
0.75
1
1.6
4.2
12.0
16.0
1.3
1.3(2.9)
FeaturesSpecificationsTerminal FunctionsExternal Dimensions
7
COMPACT INVERTER
FRENIC-
EMC Filter Built-in Model
Specifications
Three-phase 400V series
Item Specifications
Input power source
Type
(FRN C2E-4E)
Nominal applied motor[kW]
Nominal applied motor[HP]
Rated capacity[kVA]
Rated voltage[V]
Rated current[A](*1)
Overload capability
Output ratingsInput ratingsBraking
Rated frequency[Hz]
Phases, Voltage, Frequency
Voltage/Frequency variations
Rated current[A]
Required power supply capacity[kVA]
Torque[%]
DC injection braking
Braking transistor
Applicable safety standards
Applicable EMC standards
(EN61800-3:2004 +A1:2012)
(in progress)
Enclosure (IEC 60529)
Cooling method
Weight / Mass[kg(Ibs)]
*1
The load shall be reduced so that the continuous operating current is the rated current in parenthesis or less if the carrier frequency is set to 3kHz or above or ambient temperature exceeds 40℃ (104℉).
(with DCR)
(without DCR)
Three-phase 400V
FRN C2E-4E
0002
0.4
1/2
1.3
Three-phase 380 to 480V (With AVR)
1.8(1.5)
150% of rated current for 1min
150% of rated current for 1min or 200% of rated current for 0.5s (If the rated current is in parenthesis)
50, 60Hz
Three-phase, 380 to 480V, 50/60Hz
Voltage: +10 to -15% (Voltage unbalance : 2% or less), Frequency: +5 to -5%
0.85
1.7
0.6
100
Starting frequency: 0.0 to 60.0Hz, Braking time: 0.0 to 30.0s Braking level: 0 to 100%
Built-in
UL508C, EN 61800-5-1:2007
Immunity : Second Environment (Industrial)
Emission : Category C2
IP20 (IEC 60529:1989) / UL open type (UL50)
Natural cooling
1.5(3.3)
0004
0.75
1
2.3
3.1(2.5)
1.6
3.1
1.1
1.6(3.5)
0005
1.5
2
3.2
4.3(3.7)
3.0
5.9
2.0
50
Fan cooling
3.0(6.6)
0007
2.2
3
4.8
6.3(5.5)
4.4
8.2
2.9
30
3.1(6.8)
0011
4.0
5
8.0
10.5(9.0)
7.3
13.0
4.9
3.2(7.1)
0013
5.5
7.5
9.9
13
150% of rated current for 1min or
200% of rated current for 0.5s
10.6
17.3
7.4
20
Immunity : Second Environment (Industrial)
Emission : Category C3
4.6(10.1)
0018
7.5
10
13
18
14.4
23.2
10
4.6(10.1)
0024
11
15
18
24
21.1
33.0
15
6.7(15)
0030
15
20
22
30
28.8
43.8
20
6.7(15)
Single-phase 200V series
Item Specifications
Input power source
Type
(FRN C2E-7E)
Nominal applied motor[kW]
Nominal applied motor[HP]
Rated capacity[kVA]
Rated voltage[V]
Rated current[A](*1)
Overload capability
Output ratingsInput ratingsBraking
Rated frequency[Hz]
Phases, Voltage, Frequency
Voltage/Frequency variations
Rated current[A]
Required power supply capacity[kVA]
Torque[%]
DC injection braking
Braking transistor
Applicable safety standards
Applicable EMC standards
(EN61800-3:2004 +A1:2012)
(in progress)
Enclosure (IEC 60529)
Cooling method
Weight / Mass[kg(Ibs)]
*1
The load shall be reduced so that the continuous operating current is the rated current in parenthesis or less if the carrier frequency is set to 3kHz or above or ambient temperature exceeds 40℃ (104℉).
(with DCR)
(without DCR)
Single-phase 200V
FRN C2E-7E
0001
0.1
1/8
0.30
Single-phase, 200 to 240V, 50/60Hz
0.8(0.7)
150% of rated current for 1min
150% of rated current for 1min or 200% of rated current for 0.5s (If the rated current is in parenthesis)
50, 60Hz
Single-phase, 200 to 240V, 50/60Hz
Voltage: +10 to -10%, Frequency: +5 to -5%
1.1
1.8
0.3
150
Starting frequency: 0.0 to 60.0Hz, Braking time: 0.0 to 30.0s, Braking level: 0 to 100%
−
UL508C, EN 61800-5-1:2007
Immunity : Second Environment (Industrial)
Emission : Category C2
IP20 (IEC 60529:1989) / UL open type (UL50)
Natural cooling
0.7(1.5)
0002
0.2
1/4
0.57
1.5(1.4)
2.0
3.3
0.4
0.7(1.5)
0004
0.4
1/2
1.3
3.5(2.5)
3.5
5.4
0.7
100
Built-in
0.8(1.8)
0006
0.75
1
2.0
5.5(4.2)
6.4
9.7
1.3
1.2(2.6)
0010
1.5
2
3.5
9.2(7.0)
11.6
16.4
2.4
50
Fan cooling
3.0(6.6)
0012
2.2
3
4.5
12.0(10.0)
17.5
24.0
3.5
30
3.0(6.6)
8
Loading...