Dovetail Bits
1/4"
7.5°
# 22-100
# 22-107
Joinery Bits
156
A
Application: Strong, attractive joints for drawers and boxes
• Compatible with popular dovetail jigs, these bits produce smooth, intricate
dovetail joints.
• Cuts all composition materials, plywoods, hardwoods, and softwoods.
• Use on CNC and other automatic routers as well as hand-held and table-mounted
portable routers.
®
H
d
h
D
A
®
NEW
H
d
h
Item Overall Carbide Angle Shank Overall
Number Dia.(D) Height(h) (d) Dia.(A) Length(H)
22-100 1/4" 5/16" 7-1/2° 1/4" 2"
22-101 5/16" 3/8" 9° 1/4" 1-7/8"
22-102 3/8" 3/8" 9° 1/4" 1-7/8"
22-103 3/8" 3/8" 14° 1/4" 2-1/2"
22-104 1/2" 1/2" 14° 1/4" 1-7/8"
22-105 5/8" 7/8" 7° 1/4" 2-1/8"
22-106 3/4" 7/8" 7° 1/4" 2-1/8"
22-119 1/4" 1/4" 8° 1/4" 2"
22-120 3/8" 1/2" 8° 1/4" 2-1/2"
22-121 7/16" 5/8" 8° 1/4" 2-3/8"
22-122 1/2" 13/16" 8° 1/4" 2-3/4"
22-123 5/16" 3/8" 8° 1/4" 1-7/8"
22-124 1/2" 1/2" 14° 1/4" 2-5/8"
22-125 1/2" 5/8" 10° 1/4" 2-3/8"
22-126 9/16" 3/8" 14° 1/4" 2"
22-128 3/4" 7/8" 14° 1/4" 2-3/8"
22-129 1/2" 13/32" 8° 1/4" 2-5/32"
22-107 1/4" 5/16" 7-1/2° 1/2" 2-5/8"
22-108 5/16" 3/8" 9° 1/2" 2-1/8"
22-110 3/8" 3/8" 9° 1/2" 2-1/4"
22-112 1/2" 1/2" 14° 1/2" 2-1/4"
22-113 5/8" 7/8" 7° 1/2" 2-5/8"
22-114 3/4" 7/8" 7° 1/2" 2-5/8"
22-115* 17/32" 25/32" 7° 1/2" 2-3/8"
22-130 11/16" 1" 8° 1/2" 3-1/8"
22-132 13/16" 1-1/4" 8° 1/2" 3-3/8"
22-134 3/4" 3/4" 14° 1/2" 3-1/8"
Top Bearing Dovetail
22-505 5/8" 7/8" 7° 1/4" 2-5/8"
22-506 3/4" 7/8" 7° 1/4" 2-5/8"
22-507 3/4" 7/8" 14° 1/4" 2-5/8"
22-508 9/16" 3/8" 14° 1/4" 2-3/16"
* For use with Porter-Cable®Dovetail Jig #4212.
D
ROUTER BITS & SETS
Example of Dovetail
on drawer sides
# 22-119
# 22-123
8°
1/4"
8°
5/16"
# 22-101
# 22-108
Red Item Numbers Indicate 1/2" ShankAll Profile Drawings 1:1 Scale
9°
5/16"
3/8"
8°
# 22-120
(Continued)
5/8"
7°
# 22-105
# 22-113
14°
Dovetail Bits
9°
8°
# 22-103
# 22-129
# 22-115
14°
8°
7°
3/8"
1/2"
17/32"
# 22-102
# 22-110
# 22-104
# 22-124
# 22-112
# 22-126
14°
14°
14°
3/8"
1/2"
9/16"
# 22-125
7°
10°
# 22-121
7/16"
8°
1/2"
1/2"
# 22-122
8°
157
11/16"
# 22-130
8°
# 22-126
3/4"
# 22-134
7°
9/16"
# 22-106
# 22-114
7°
3/4"
# 22-132
14°
13/16"
14°
ROUTER BITS & SETS Joinery Bits
9/16"
5/8"
# 22-505 Top Bearing
Red Item Numbers Indicate 1/2" Shank All Profile Drawings 1:1 Scale
# 22-506 Top Bearing
3/4"
# 22-507 Top Bearing
# 22-508 Top Bearing
3/4"
Butterfly Spline Bit
Joinery Bits
A
Application: Sturdy, decorative design for exposed joints
• This bit produces a strong, attractive method of joining wood. Use a 14-degree
dovetail bit to produce the mating grooves.
• Cuts all composition materials, plywoods, hardwoods, and softwoods.
• Use on CNC and other automatic routers as well as hand-held and table-mounted
portable routers.
Item Overall Small Carbide Angle Shank Overall
Number Dia.(D) Dia.(n) Height(h) (d) Dia.(A) Length(H)
24-106 1-1/8" 11/16" 1-3/4" 14° 1/2" 3-1/4"
H
14°
h
d
D
# 24-106
158
A
h
BC
D
3/8"
ROUTER BITS & SETS
3/8"
Max.
Rabbeting Bits
Application: Joining boards and letting in back panels
• Produces super smooth cuts on both surfaces of the rabbet.
• Steel pilots can be removed from bits and used with edge guides for wider rabbets.
• Cuts all composition materials, plywoods, hardwoods, and softwoods.
• Use on hand-held and table-mounted portable routers.
Item Overall Bearing Cut Carbide Shank Overall
Number Dia.(D) Dia.(B) Depth(C) Height(h) Dia.(A) Length(H)
32-096 1-1/4" 1/2" 3/8" 3/8" 1/4" 2"
32-098 1-1/4" 1/2" 3/8" 5/8" 1/4" 2-1/4"
32-100 1-1/4" 1/2" 3/8" 1/2" 1/4" 2"
H
32-101 1-3/8" 3/8" 1/2" 1/2" 1/4" 2-1/4"
32-102 1-1/4" 1/2" 3/8" 1/2" 1/2" 2-1/4"
32-106 1-3/8" 3/8" 1/2" 1/2" 1/2" 2-1/4"
32-110 1-3/8" 3/8" 1/2" 3/4" 1/2" 2"
Steel Pilots
32-302 1-1/4" 1/2" 3/8" 3/8" 1/4" 1-7/8"
32-306 1-1/4" 1/2" 3/8" 5/8" 1/4" 2"
3/8"
5/8" Max.
3/8"
1/2" Max.
1/2"
1/2" Max.
1/2"
3/4" Max.
# 32-096
# 32-302
# 32-098
# 32-306
# 32-100
# 32-102
# 32-101
# 32-106
# 32-110
Red Item Numbers Indicate 1/2" ShankAll Profile Drawings 1:1 Scale
Rabbeting Bits with Bearing Set
Application: Joining boards and letting in back panels with
different depths of cut
• With interchangeable bearings to cut rabbets of different depths, these sets produce
super smooth cuts on both surfaces of the rabbet.
• 32-504, 32-524, and 32-526 can also be used as flush cutting trim bits.
• Wrench included.
A
H
• Cuts all composition materials, plywoods, hardwoods, and softwoods.
• Use on hand-held and table-mounted portable routers.
Item Overall Rabbeting Carbide Shank Overall
Number Dia.(D) Depths Height(h) Dia.(A) Lenght(H)
32-502 1-3/8" 5/16",3/8",7/16",1/2" 1/2" 1/4" 2-1/4"
32-504 1-3/8" flush, 1/8",1/4",5/16",3/8",7/16",1/2" 1/2" 1/4" 2-1/4"
32-522 1-3/8" 5/16", 3/8", 7/16", 1/2" 1/2" 1/2" 2-1/4"
32-524 1-3/8" flush, 1/8",1/4",5/16",3/8",7/16",1/2" 1/2" 1/2" 2-1/4"
32-526 1-3/8" flush, 1/8",1/4",5/16",3/8",7/16",1/2" 3/4" 1/2" 2-1/2"
1/8"
h
1/8"
1/4"
1/4"
D
# 32-502
# 32-504
# 32-522
# 32-524
1/2"
# 32-504
# 32-524
5/16"
# 32-502
# 32-504
# 32-522
# 32-524
1/2" Max.
# 32-526
3/8" Bearing #62-102
1/2" Bearing #62-104
5/8" Bearing #62-113
1/2" Max.
1/2" Max.
# 32-526
# 32-526
3/8"
5/16"
3/4" Max.
3/4" Max.
3/4" Max.
# 32-502
# 32-504
# 32-522
# 32-524
# 32-526
# 32-504
# 32-524
7/16"
1/2" Max.
3/8"
3/4" Max.
Both Sets Include the Wrench and Step Washers
Set of
4
or
# 32-526
1/2" Max.
# 32-502
# 32-504
# 32-522
# 32-524
# 32-526
• Wrench
#62-402
• 1/2" STEP WASHER
#62-313
3/4" Max.
7/16"
1/2" Max.
159
1/2"
3/4" Max.
3/4" Bearing #62-144
7/8" Bearing #62-146
1-1/8" Bearing #62-148
1-3/8" Bearing #62-150
Red Item Numbers Indicate 1/2" Shank All Profile Drawings 1:1 Scale
Set of
7
• 3/8" STEP WASHER
#62-311
3/8"
Supplied 3/8" STEP
WASHER to use when
mounting 3/8" ball
bearing only.
ROUTER BITS & SETS Joinery Bits
Joinery Bits
1/8"
# 62-122
1/4"
23/32"
H
Stacked Slotting Set
Application: Producing grooves 1/8" to 23/32" wide
• By changing the bearings this set will cut three different depths (1/4", 3/8", 1/2").
• Set includes Freud's slotting cutter arbor 60-202, 3 bearings and 4 specially
designed slotting cutters.
• Cuts all composition materials, plywoods, hardwoods, and softwoods.
• Use on hand-held and table-mounted portable routers.
Item Overall Carbide Shank Overall
Number Dia.(D) Height(h) Dia.(A) Length(H)
61-102 2" 1/8"-23/32" 1/2" 3-1/4"
Replacement Bearings
A
Item Bearing Cut
Number Dia.(B) Depth
62-120 1" 1/2"
62-121 1-1/4" 3/8"
62-122 1-1/2" 1/4"
Replacement Cutters
Item Overall Carbide
Number Dia. Height
54-108 2" 1/8"
160
h
23/32"
D
B
# 62-120
( 1" Bearing)
# 62-121
( 1-1/4" Bearing)
23/32"
1/2"
1/8"
# 62-120
3/8"
1/8"
# 62-121
ROUTER BITS & SETS
# 62-122
( 1-1/2" Bearing)
Red Item Numbers Indicate 1/2" ShankAll Profile Drawings 1:1 Scale
Biscuit Joining Set
A
Application: Creating perfect slots for biscuit joining
• Easy and economical way to join wood.
• Cuts all composition materials, plywoods, hardwoods, and softwoods.
• Use on hand-held and table-mounted portable routers.
®
H
D
Item Overall Carbide Shank Overall
Number Dia.(D) Height(h) Dia.(A) Length(H)
99-041 1-27/32" 5/32" 1/2" 3-1/4"
Replacement Cutter
52-154 1-27/32" 5/32" 5/16" –
Bearings
Bearing No. Size Bearing Dia. Cut Depth
62-128 00 30mm 8.5mm
62-124 10 26mm 10.5mm
62-108 20 22mm 12.5mm
h
Examples of various joint configurations
8.5mm
# 62-128
(30mm Bearing)
# 62-124
(26mm Bearing)
# 62-108
(22mm Bearing)
With Bearing
# 62-128
10.5mm
With Bearing
# 62-124
12.5mm
With Bearing
# 62-108
5/32"
5/32"
5/32"
Biscuit Size–00
47mm x 15mm
1-7/8" x 5/8"
Biscuit Size–10
54mm x 19mm
2-1/8" x 3/4"
Biscuit Size–20
59mm x 22mm
2-3/8" x 7/8"
161
ROUTER BITS & SETS Joinery Bits
Red Item Numbers Indicate 1/2" Shank All Profile Drawings 1:1 Scale
Biscuit
Joinery Bits
3/32"
9/16" Max.
# 58-106
Three Wing Slotting Cutters
Application: Producing slots and grooves for T-moldings, spline
joints, tongue & groove joints and many other applications
• Should be used with Freud's slotting cutter arbors 60-100 for 1/4" shanks and
60-102 for 1/2" shanks.
• Compatible with 62-108 bearing.
• Cutter 56-109 can be used for biscuit joining.
• Cuts all composition materials, plywoods, hardwoods, and softwoods.
• Use on hand-held and table-mounted portable routers.
Item Overall Number Bore Carbide
®
Number Dia.(D) of Cutters Dia.(n) Height(h)
56-100 2" 3 5/16" 1/16"
56-106 2" 3 5/16" 3/32"
56-108 2" 3 5/16" 1/8"
56-109 2" 3 5/16" 5/32"
56-110 2" 3 5/16" 3/16"
56-112 2" 3 5/16" 1/4"
9/16" Max.
9/16" Max.
9/16" Max.
162
n
h
D
# 56-100
9/16" Max.
# 56-109
1/16"
5/32"
# 56-106
# 56-110
9/16" Max.
3/32"
3/16"
1/8"
# 56-108
9/16" Max.
1/4"
# 56-112
Four Wing Slotting Cutters
Application: Producing slots and grooves for T-moldings, spline
joints, tongue & groove joints and many other applications
• Should be used with Freud's slotting cutter arbors 60-100 for 1/4" shanks and
60-102 for 1/2" shanks.
• Compatible with 62-108 bearing.
• Cuts all composition materials, plywoods, hardwoods, and softwoods.
• Use on hand-held and table-mounted portable routers.
Item Overall Number Bore Carbide
Number Dia.(D) of Cutters Dia.(n) Height(h)
58-100 2" 4 5/16" 1/16"
®
58-106 2" 4 5/16" 3/32"
58-108 2" 4 5/16" 1/8"
58-110 2" 4 5/16" 3/16"
58-112 2" 4 5/16" 1/4"
ROUTER BITS & SETS
n
h
D
# 58-100
9/16" Max.
# 58-110
1/16"
9/16" Max.
3/16"
9/16" Max.
1/8"
# 58-108
9/16" Max.
1/4"
# 58-112
Red Item Numbers Indicate 1/2" ShankAll Profile Drawings 1:1 Scale
Slotting Cutter Arbors
Application: Producing smooth, precise, accurate slots
A
®
H
• For premium performance use with Freud slotting cutters, although compatible with
any slotting cutter with a 5/16" bore.
• Use on hand-held and table-mounted portable routers.
Item Arbor Stud Arbor Shank Overall
Number Dia.(D) Height(h1) Height(h2) Dia.(A) Length(H)
60-100 5/16" 1" 25/64" 1/4" 2-3/8"
60-102 5/16" 1" 25/64" 1/2" 2-3/8"
60-120* 5/16" 1" 25/64" 1/4" 2-3/8"
60-122* 5/16" 1" 25/64" 1/2" 2-3/8"
60-152 5/16" 2-1/4" 5/8" 1/2" 4-1/4"
* Includes bearing # 62-108
D
A
®
22mm
h(2)
h(1)
H
Shims
®
Any 56 Series Three
Wing Slotting Cutter
or
Any 58 Series Four Wing
Slotting Cutter
(X2) Cutters
®
Shims
163
Arbor:
#60-120 and #60-122
include bearing #62-108
Red Item Numbers Indicate 1/2" Shank All Profile Drawings 1:1 Scale
ROUTER BITS & SETS Joinery Bits
Joinery Bits
H
Slotting Cutter Sets
Application: Producing slots and grooves 9/16" deep for T-moldings,
Spline Joints, Tongue & Groove Joints, and other applications
• Includes three wing slotting cutter, arbor and ball bearing.
• Cuts all composition materials, plywoods, hardwoods, and softwoods.
• Use on hand-held and table-mounted portable routers.
Item Overall Carbide Cut Shank Overall
Number Dia.(D) Height(h) Depth Dia.(A) Length(H)
63-100 2" 1/16" 9/16" 1/4" 2-3/8"
63-104 2" 5/64" 9/16" 1/4" 2-3/8"
63-106 2" 3/32" 9/16" 1/4" 2-3/8"
63-108 2" 1/8" 9/16" 1/4" 2-3/8"
63-109 2" 5/32" 9/16" 1/4" 2-3/8"
63-110 2" 3/16" 9/16" 1/4" 2-3/8"
A
®
63-111 2" 15/64" 9/16" 1/4" 2-3/8"
63-112 2" 1/4" 9/16" 1/4" 2-3/8"
63-150 2" 1/16" 9/16" 1/2" 2-3/8"
63-154 2" 5/64" 9/16" 1/2" 2-3/8"
63-156 2" 3/32" 9/16" 1/2" 2-3/8"
63-158 2" 1/8" 9/16" 1/2" 2-3/8"
63-159 2" 5/32" 9/16" 1/2" 2-3/8"
63-160 2" 3/16" 9/16" 1/2" 2-3/8"
63-161 2" 15/64" 9/16" 1/2" 2-3/8"
63-162 2" 1/4" 9/16" 1/2" 2-3/8"
164
22mm
D
# 63-106
# 63-156
9/16"
3/32"
h
# 63-100
# 63-150
# 63-108
# 63-158
9/16"
9/16"
1/16"
1/8"
# 63-109
# 63-159
# 63-104
# 63-154
9/16"
5/64"
9/16"
5/32"
# 63-110
# 63-160
9/16"
3/16"
ROUTER BITS & SETS
# 63-111
# 63-161
9/16"
15/64"
# 63-112
# 63-162
Red Item Numbers Indicate 1/2" ShankAll Profile Drawings 1:1 Scale
9/16"
1/4"
Canoe Joint Bits
Fence
Table
Center of Material
Thickness
Centerline
of Bit
Application: Producing joints for projects such as circular planters
A
®
H
and canoes
• Bit 99-017 cuts the flute and 99-018 cuts the mating bead.
• Cuts all composition materials, plywoods, hardwoods, and softwoods.
• Use on CNC and other automatic routers as well as table-mounted portable routers.
Item Overall Carbide Large Shank Overall
Number Dia.(D) Height(h) Radius(R) Dia.(A) Length(H)
99-017 1-1/2" 1/4" 1/8" 1/2" 1-11/16"
99-018 1-1/2" 3/8" 1/8" 1/2" 1-7/8"
# 99-017
R
h
D
# 99-018
R
A
R 1/8"
®
h
D
# 99-018
H
R 1/8"
# 99-017
Reversible Glue Joint Bit
Application: Providing a stronger joint by increasing the surface
A
®
area for glue
• Plane boards to a uniform thickness; align bit to the center of the board, then
reverse each board for a perfect glue joint.
• Cuts all composition materials, plywoods, hardwoods, and softwoods.
• Use on CNC and other automatic routers, as well as table-mounted
portable routers.
Item Overall Small Carbide Angle Shank Overall
Number Dia.(D) Dia.(n) Height(h) (d) Dia.(A) Length(H)
99-031 1-1/2" 1-3/16" 1-1/4" 30° 1/2" 2-3/4"
165
n
H
d
h
D
Red Item Numbers Indicate 1/2" Shank All Profile Drawings 1:1 Scale
# 99-031
ROUTER BITS & SETS Joinery Bits
Opposing Grain Direction
Drawer Lock Bits
Fence
Table
Router
Bit Position
Above Router
Table Should Be:
3/8" for #99-240
15/32" for #99-239
Fence
Table
Router
Bit Position
Above Router
Table Should Be:
3/8" for #99-240
15/32" for #99-239
Application: Forming a strong joint between the sides and front of a drawer
A
®
• Drawer fronts are formed horizontally, flat on the table surface.
• Drawer sides are formed vertically against the fence of the table.
• Cuts all composition materials, plywoods, hardwoods, and softwoods.
• Use on table-mounted portable routers.
Item Overall Small Carbide Minor Angle Shank Overall
Number Dia.(D) Dia.(n) Height(h) Height(m) (d) Dia.(A) Length(H)
99-239 1-1/4" 1-1/64" 1/2" 13/64" 30° 1/4 1-3/4"
99-240 2" 1-3/4" 33/64" 5/32" 30° 1/2" 2"
Joinery Bits
166
H
m
1
n
h
d
D
# 99-239
# 99-240
2
Drawing not to scale
Drawer lock bits should be positioned above the router table as shown above for optimal performance.
ROUTER BITS & SETS
Drawing not to scale
Example of Drawer Lock
Red Item Numbers Indicate 1/2" ShankAll Profile Drawings 1:1 Scale
Lock Miter Bits
Simple Joint
90° Miter Joint
Simple Joint
45° Miter Joint
®
D
A
h
H
22.3°
®
Fence
Table
Center of Material
Thickness
Centerline
of Bit
90°
Fence
Table
Center of
Material
Thickness
Centerline
of Bit
Application: Creating interlocking corner joints
• Run one board vertically and the piece to be joined horizontally.
• 99-035 cuts thinner panels for projects such as humidors and jewelry boxes.
• Cuts all composition materials, plywoods, hardwoods, and softwoods.
• Use on CNC and other automatic routers, as well as table-mounted portable
routers.
Item Overall Carbide Angle Shank Overall
Number Dia.(D) Height(h) Dia.(A) Length(H)
99-034 2-3/4" 1-5/32" 45° 1/2" 2-5/8"
99-035 2-11/64" 7/8" 45° 1/2" 2-3/8"
NEW
99-043 1-15/32" 7/8” 22-1/2° 1/2” 2-3/8"
A
®
1"
1/2"
Max.
Min.
H
# 99-034
h
45°
D
# 99-035
3/8"
Min.
3/4"
Max.
167
22-1/2 Degree Set
# 99-043
NEW
3/8"
3/4"
Min.
# 99-043
45°
Max.
Red Item Numbers Indicate 1/2" Shank All Profile Drawings 1:1 Scale
ROUTER BITS & SETS Joinery Bits
170
ROUTER BITS & SETS
Joinery Bits
Raised Panel “V” Joint Bit
• Mating surfaces are at an angle, not vertical, so the dark lines like those created by
standard finger joint bits arenot visible.
• Bit does not have to be centered in the wood.
• Simply raise or lower the bit 3/32" to route the mating edge.
• Cuts all composition materials, plywoods, hardwoods, and softwoods.
• Use on table-mounted portable routers.
Application: Producing strong, attractive glue joint raised panels
Red Item Numbers Indicate 1/2" ShankAll Profile Drawings 1:1 Scale
Item Overall Carbide Minor Angle Shank Overall
Number Dia.(D) Height(h) Height (d) Dia.(A) Length(H)
99-038 1-3/8" 1-37/64" 3/16" 80° 1/2" 3-1/16"
Opposing Grain Direction
Example of “V” Jointed Panel
A
®
H
3/16"
5/32"
D
h
d
# 99-038
Adjustable Tongue & Groove Bit Set
7/32"
3/8"
7/32"
3/8"
Application: Producing perfectly fitted tongue and groove joints for
projects such as Shaker style cabinet doors
• Exclusive Freud design features a tongue cutter with opposing shear angles
to ensure a flawless finish.
• Adjustable at .002 inch increments for stock thickness of 1/2" to 1-1/4" and groove
widths of 7/32" to 3/8".
• Cuts all composition materials, plywoods, hardwoods, and softwoods.
• Use on table-mounted portable routers.
Item Bit Overall Bearing Carbide Shank Overall
Number Type Dia.(D) Dia.(B) Height(h) Dia.(A) Length(H)
99-036 Tongue Bit 1-3/4" 7/8" 7/32" ~ 3/8" 1/2" 3-1/4"
Groove Bit 1-3/4" 7/8" 13/16" ~ 1-11/32" 1/2" 2-11/16"
A
®
U.S. Pat. No. 6,367,524
A
®
H
h
B
D
H
Breadboard Ends
h
B
D
169
Red Item Numbers Indicate 1/2" Shank All Profile Drawings 1:1 Scale
Tongue & Groove Joints
Shaker Style Doors
ROUTER BITS & SETS Joinery Bits
Joinery Bits
Raised Panel “V” Joint Bit
Application: Producing strong, attractive glue joint raised panels
• Mating surfaces are at an angle, not vertical, so the dark lines like those created by
standard finger joint bits arenot visible.
• Bit does not have to be centered in the wood.
• Simply raise or lower the bit 3/32" to route the mating edge.
• Cuts all composition materials, plywoods, hardwoods, and softwoods.
• Use on table-mounted portable routers.
Item Overall Carbide Minor Angle Shank Overall
A
®
H
Number Dia.(D) Height(h) Height (d) Dia.(A) Length(H)
99-038 1-3/8" 1-37/64" 3/16" 80° 1/2" 3-1/16"
3/16"
170
5/32"
D
ROUTER BITS & SETS
h
d
# 99-038
Example of “V” Jointed Panel
Opposing Grain Direction
Red Item Numbers Indicate 1/2" ShankAll Profile Drawings 1:1 Scale
Finger Joint Bit
Application: Joining wood edge-to-edge or end-to-end
• Produces a joint that is stronger than the wood itself.
• Tips on each side of the bit are offset, cutting twice as many fingers as you see
tips on each side of the bit.
• Cuts all composition materials, plywoods, hardwoods, and softwoods.
• Use on CNC and other automatic routers as well as table-mounted portable router.
Item Overall Cut Carbide Minor Shank Overall
Number Dia.(D) Depth Height(h) Height(m) Dia.(A) Length(H)
99-037 1-3/8" 5/16" 1-9/16" 21/64" 1/2" 3"
A
®
H
# 99-037
m
h
14°
171
5/16"
D
Red Item Numbers Indicate 1/2" Shank All Profile Drawings 1:1 Scale
ROUTER BITS & SETS Joinery Bits
Joinery Bits
# 52-104
h
# 52-108
h
Variable Height Finger Joint Bit
Application: Adjustable to produce finger joints up to 1-25/32" thick
• Ideal for joining wood edge-to-edge or end-to-end, because the joint produced is
stronger than the wood itself.
• Replacement cutters available and uses arbor #60-152.
• Allows you complete freedom when producing finger joints.
A
®
B
H
• Cuts all composition materials, plywoods, hardwoods, and softwoods.
• Use on hand-held and table-mounted portable routers.
Item Overall Cut Bearing Carbide Shank Overall
Number Dia.(D) Dia.(C) Dia.(B) Height(h) Dia.(A) Length(H)
99-039 2" 5/16" 1-3/8"(35mm) 1-9/16" 1/2" 4-1/4"
Replacement Cutters
Item Overall Bore Carbide
Number Dia. Dia. Height
52-104 2" 5/16" 7/32"
52-108 2" 5/16" 21/64"
Replacement Bearing
Item# Outside Dia. Inside Dia. Height
62-109 35mm 15mm 11mm
C
h
172
D
ROUTER BITS & SETS
# 99-039
®
d
D
®
d
D
Red Item Numbers Indicate 1/2" ShankAll Profile Drawings 1:1 Scale
“V” Panel Bit Set
Application: Creating attractive “V” Groove paneling
• Set includes spacers that allow you to produce “V” paneling from 1/2", 3/4", or
1" thick stock.
• Cuts all composition materials, plywoods, hardwoods, and softwoods.
• Use on table-mounted portable routers.
Item Overall Small Carbide Minor Minor Angle Shank Overall
Number Dia.(D) Dia.(n) Height(h) Height(m1) Height(m2) Dia.(A) Length(H)
99-191 1-11/64" 1-37/64" 1-1/8" 5/32"~5/16" 25/64" 45° 1/2" 3-3/8"
AA
®
®
H
d
m 2
m 1
n
D D
n
h
173
1/2"
3/4"
# 99-191
Red Item Numbers Indicate 1/2" Shank All Profile Drawings 1:1 Scale
1"
ROUTER BITS & SETS Joinery Bits
Loading...