Watch Phone User Manual
1
Safety notice
Before use, Please read the user manual carefully.
Only support the standard battery, charger and accessories
we approved, we won’t take any responsibility for any
consequences caused by the use of third party accessories
Prohibit the unauthorized disassembly of watch phone
No mechanical vibrating and shaking, No kicking the screen
by tool
No using solute to clean the shell, such as benzene,thinner or
alcohol, No touching the watch phone with corrosive
chemicals and so on, but with a clean textile to clean it softly.
No exposing the watch phone under the sunrise or the place
with smog and dust,
Keep the phone in dry. No using in the wet environment such
as bathroom. This watch is not water proof and is strictly
prohibited to rain and moisture.
Please put the watch phone in a safety place out of the reach
of children to avoid any dangerous happenning.
2
1、Introduction
1.1 Key function introduction
1.Speaker
2.USB/earphone port
5.Power on/off/Return
1.2 Removable battery, install Sim card and Micro sd
card Step illustration:
11
• Ple ase t ry it later if the network is busy.
Cannot dial the watch phone
• Please ma ke su re the telephone NO. i s correct a nd pre ss
the call button
• For the internet ca lling , please ch eck t he co untry code
and area code.
• Ple ase make su re th e pho ne with net work and n ot in
busy status
• Please make sure yo ur Sim card ha ve enough mon ey and
did not prohibit the calling
• To inqui ry you r reg ister info rmatio n from you r network
supplier (such as limit, SIM card validity and so on )
• Ple ase make su re di d not set the ca ll limited
• Please check if set the fixed dialing
Music cannot be played
• Ple ase ch eck if the musi c form at is supp ortabl e, su ch as
MMF format
• Ple ase ch eck t he mu sic i s existed withou t del eting: you
can u pdate your playi ng list and make sure it is unde r “my
music ” fil e.
Can not sync SMS
•Please check if have donwload the Apk in your Android
phone(Iphone not support)
•Plea se che ck if you ha ve ac tived the b luetoo th notifica tion
function after installing the Apk
10
If any problems appearred when using the watch phone,
please follow below solution ways. If the problems are
still existed, please contact the distributor or appointted
maintenance personnel
The watch phone can not power on.
• Pre ss “on” but ton t ill startup scree n
• Che ck th e bat tery power
• Chec k if th e battery poo r contact, re move i t and install the
battery again, then power on
No feedback for several minutes
• Pre ss “off” ke y
• Rem ove the battery and install again, the n power on .
Using time is short
• Ple ase make su re ha ve no t closed the screen savers
• Ple ase make su re en ough charg ing time(mo re th an 3
hours)
• After chargin g parts of power, Ba ttery level i ndicator mig ht
be inaccurate. Please wait about 20minutes to get the
accurate indication after removing the battery charger.
Cannot connect the network
• Ple ase t ry in anoth er pl ace
• Ple ase co nfirm the net se rvice plac e from your netw ork
supplier
• Ple ase make su re yo ur SI M card is e ffecti ve fr om your
network supplier
• Try to select th e network by han d
3
2、Phone function
Function introduction
This watch phone can support GSM quad bands sim
card(850MHZ,900MHZ,1800MHZ,1900MHZ) and
Expand TF memory card. It is not only a watch phone, also can use its
smart bluetooth to sync your another Iphone&Android phone’s music
player, calls, call history, phonebook, also can sync Android phone’s
SMS, Email, Facebook, Skype, Twitter, weather ect notification.
It also has build-in bluetooth(connect with bluetooth headset), FM,
U-disk, Alarm, Calendar, Mp3,Mp4, Voice recorder, Calculator, Sleep
monitor, Pedometer, Remote shooting and so on.
2.1 Standby Clock
Common Troubleshooting
4
2.2 Main Memu
1.Display the time and Date
2.The three menuat the botton are: Missed calls, Pedometer and
Phone settings
2.3 Function menu
9
4.Click “Notification APP”, can choose which APP notifications need to
push to the watch:
8
*you can click to choose open and closed about the push
notification service to the watch. ICON means” Open”.
5
PS: Looking phone, Reminding, Pedometer, Sleep monitor use the
same sensor, so can not use them together at the same time.
3: Click “Accessibility settings” To activate the bluetooth notice. “ ON”
means activated state.
6
3 Settings
3.1 Bluetooth setting
Option
Instructions
Active bluetooth
Can turn on/off the bluetooth
Search handfree
devices
After the activation, it can search
the devices to communicate with it
My device
The searched device name
Connecting device
Display the connected device name
3.2 Restore factory setting
The phone will be restored factory default setting after select
this function. But it needs to insert the password, default
password is“1122”
3.3 Audio player
The inner music player can play music, and set the music to
be the ring. But attention: The MP3 files only can be played
after saved to the Root directory“my music”
Choosing the suitable volume when listening the music as it
may harm your hearing in continued high volume.
3.4 FM radio
Using the phone to listen the broadcast, please insert the
7
earphone to the usb port. The earphone line is same as the
antenna of radio, so please let it hanging freely
3.5 Apk install for smart phone
1: APK must be installed first in your Smart Phone , then the Sync
service can work .
Scan QC code in watch to get “APK “, download this APK, install it in
the phone.
2: When you want to sync the phone’s Push Notification to the watch,
click this APK ICON, open this software. ( before this step, please
make sure your phone have connect with the watch via bluetooth.)
Then you will enter the below interface:
Loading...