Fluke JR-LEV-1, JR-LEV-1-H, JR-SYS-UNI-1, JR-SYS-UNI-1-H, JR-LEV-2 Technical Data Manual
...
JackRapid™ Termination Tool
Reduces installation time
Introducing the new JackRapid,
jack termination tool – the industry’s
most innovative and time-saving
Easy-to-use tool seats and cuts all •
wires at once
Increases productivity – install jacks •
8 times faster
termination tool. This patented tool
seats and terminates all wires simul-
taneously, with one squeeze of
the ergonomic handle. Get accurate
terminations and clean, consistent
cuts every time.
Accurate, clean and consistent
cuts and terminations
Consistent terminations every time – •
no more wasted jacks
Built-in bed helps hold jack in place•
Eliminates user fatigue
Ergonomic handle•
Convenient, built-in stripper•
Future proof
Replaceable blade heads for use with multiple vendor jack types•
Wall-friendly
Unique design easily accommodates close-to-wall installations•
Ordering Information
Item Model Name Description
3093687 JR-LEV-1
3093756 JR-LEV-1-H
3093808 JR-SYS-UNI-1
3093813 JR-SYS-UNI-1-H
3093693 JR-LEV-2
3093763 JR-LEV-2-H
3093700 JR-SYS-2
3093824 JR-SYS-2-H
3093721 JR-ORT-2
3093774 JR-ORT-2-H
3057463 JR-ERGOHANDLE JackRapid Ergonomic Handle
JR-LEV-1, JackRapid Termination Tool
(for Leviton 41106, 41108, 5G108)
JR-LEV-1-H, JackRapid replacement blade head
(for Leviton 41106, 41108, 5G108)
JR-SYS-UNI-1, JackRapid Termination Tool
(for Systimax MPS100E, C5, M1BH and Uniprise UNJ600/500/300)
JR-SYS-UNI-1-H, JackRapid replacement blade head
(for Systimax MPS100E, C5, M1BH and Uniprise UNJ600/500/300)
JR-LEV-2, JackRapid Termination Tool
(for Leviton 61110, 5G110, 6110G)
JR-LEV-2-H, JackRapid replacement blade head
(for Leviton 61110, 5G110, 6110G)
JR-SYS-2, JackRapid Termination Tool
(for Systimax MGS400, MGS500, MFP420, MFP520)
JR-SYS-2-H, JackRapid replacement blade head
(for Systimax MGS400, MGS500, MFP420, MFP520)
JR-ORT-2, JackRapid Termination Tool
(for Ortronics TJ5E00, TJ600, TJ610)
JR-ORT-2-H, JackRapid replacement blade head
(for Ortronics TJ5E00, TJ600, TJ610)
Technical Data
See how to terminate jacks 8 times faster
Get accurate terminations and clean, consistent cuts every time with the JackRapid Termination Tool.
Distributed by:
All-Spec Industries
5228 US Hwy 421 N
Wilmington, NC 28401
sales@all-spec.com
www.all-spec.com
PH: 800-537-0351
FX: 800-379-9903
1. Strip cable jacket with a
standard cable stripper or
the built-in cable stripper.
4. Ensure jack is completely and
securely inserted in jack holder
bed with IDC slots facing the
blades.
2. Determine wiring scheme. Dress
all 4 pairs (8 wires).
5. Pull trigger completely and
remove excess wire prior to
releasing trigger.
3. Insert jack in JackRapid front
first with IDC slots facing
blades of JackRapid.
6. Wires will be seated and cut for
a solid termination.
7. Release handle and remove jack
from JackRapid tool. Visually
verify proper termination.
NETWORKSUPERVISION
Fluke Corporation
P.O. Box 777, Everett, WA USA 98206-0777
Fluke Networks operates in more than 50 countries
worldwide. To find your local office contact details,
go to www.flukenetworks.com/contact.
©2007 Fluke Corporation. All rights reserved.
Printed in U.S.A. 11/2007 2447816 D-ENG-N Rev E
Loading...