Fluke i30 Data sheet

Fluke i30
AC/DC Current Clamp
The i30 current clamp is based on Hall effect technology for use in measurement of both dc and ac current. The i30 may be used in conjunction with multimeters, recorders and other suitable recording instruments for accurate non-intrusive current measurement.
Technical Data
Electrical specifications
Specified current range: 30 mA to 30 A DC, 30 mA to 20 A AC rms Usable current range: 5 mA to 30 A DC, 30 mA to 20 A AC rms
Crest factor: 1.4 Output sensitivity: 100 mV/A Accuracy (at +25 °C): ± 1 % of reading ± 2 mA Resolution: ± 1 mA Load impedance: > 10 k Ohms and 100 pF Conductor position sensitivity: ± 1 % relative to
center reading
Frequency range: DC to 20 kHz (- 0.5 dB) Temperature coefficient: ± 0.01 % of reading/°C Power supply: 9 V Alkaline, MN1604/PP3,
30 hours, low battery indicator Working voltage (see Safety Standards section): 300 V ac rms or dc
General specifications
Maximum conductor size: 19 mm (.748 in) diameter Output connection: 4 mm (.157 in) safety connector
Output zero: Manual adjust via thumbwheel Cable length: 1.5 m (4.91 ft) Operating temperature range: 0 °C to +50 °C
(-32 °F to 122 °F)
Storage temperature range (with battery removed): -20 °C to +85 °C (-4 °F to 185 °F) Operating humidity: 15 % to 85 %
(non-condensing)
Weight: 250 g (.55 lb)
Safety standards
BS EN 61010-1: 2001 BS EN 61010-2-032: 2002 BS EN 61010-031: 2002
300 Vrms, Category III, Pollution Degree 2
Use of the probe on uninsulated conductors is limited to 300 V acrms or dc and frequencies below 1 kHz.
EMC Standards
EN 61326: 1998 +A1, A2, & A3
Ordering information
i30 AC/DC Current Clamp
Dimensions (HxWxD)
183 mm x 71 mm x 25 mm (7.2 in x 2.8 in x 1 in)
i30 connected to a Fluke 87V Digital Multimeter.
Fluke. Keeping your world up and running.
Fluke Corporation PO Box 9090, Everett, WA USA 98206
Fluke Europe B.V. PO Box 1186, 5602 BD Eindhoven, The Netherlands
For more information call: In the U.S.A. (800) 443-5853 or Fax (425) 446-5116 In Europe/M-East/Africa +31 (0) 40 2 675 200 or Fax +31 (0) 40 2 675 222 In Canada (800) 36-FLUKE or Fax (905) 890-6866 From other countries +1 (425) 446-5500 or Fax +1 (425) 446-5116 Web access: http://www.fluke.com
©2006 Fluke Corporation. All rights reserved. Specifications subject to change without notice. Printed in U.S.A. 12/2006 2747126 D-EN-N Rev B
Loading...