i17XX-FLEX1.5K-12IP
i17XX-FLEX1.5KIP
i17XX-FLEX3KIP
i17XX-FLEX6KIP
Thin-Flexi Current Probe IP65
Safety Information
A Warning identifies conditions and procedures that are
dangerous to the user.
XW Warning
To prevent possible electrical shock, fire, or
personal injury:
• Read all safety information before you use the
Product.
• Do not alter the Product and use only as specified,
or the protection supplied by the Product can be
compromised.
• Comply with local and national safety codes. Use
personal protective equipment (approved rubber
gloves, face protection, and flame-resistant
clothes) to prevent shock and arc blast injury
where hazardous live conductors are exposed.
• Do not use the Product around explosive gas or
vapor.
• Do not touch voltages >30 V ac rms, 42 V ac peak,
or 60 V dc.
• De-energize the circuit or wear personal protective
equipment (PPE) in compliance with local
requirements before you apply or remove the
Flexible Current Probe.
PN 4971042
January 2018
©2018 Fluke Corporation. All rights reserved.
Specifications are subject to change without notification.
Find Quality Products Online at: sales@GlobalTestSupply.com
www.GlobalTestSupply.com
• Do not apply or remove the Product on energized
circuits under wet conditions.
• Do not use the Product if it is altered or damaged.
• Disable the Product if it is damaged.
• Do not use the Product if it operates incorrectly.
• Before each use, examine the Product. Look for
cracks or missing pieces of the clamp housing or
output cable insulation. Also look for loose or
weakened components. Carefully examine the
insulation around the jaws.
• Do not use a current measurement as an
indication that a circuit is safe to touch. A voltage
measurement is necessary to know if a circuit is
hazardous.
• Have an approved technician repair the Product.
• Remove the input signals before you clean the
Product.
Specifications
Safety .................................IEC 61010-1: Overvoltage CAT IV,
Temperature
Operating........................ -25 °C to +70 °C (-13 °F to +158 °F)
Storage........................... -40 °C to +80 °C (-4 °F to +176 °F)
IP Rating............................. IEC 60529:IP65
Altitude
Operating........................ 2000 m
Storage........................... 12 000 m
Measurement 1000 V CAT III /600 V
CAT IV, Pollution Degree 2
Temperature of conductor under test
shall not exceed 80 °C (176 °F)
Find Quality Products Online at: sales@GlobalTestSupply.com
www.GlobalTestSupply.com
Symbols
Symbol Description
W
X
T
-
P
)
WARNING. RISK OF DANGER.
WARNING. HAZARDOUS VOLTAGE. Risk of
electric shock.
Consult user documentation.
Double Insulated
Do not apply around or remove from uninsulated
hazardous live conductors without taking
additional protective measures.
Measurement Category II is applicable to test and
measuring circuits connected directly to utilization
points (socket outlets and similar points) of the
low-voltage MAINS installation.
Measurement Category III is applicable to test and
measuring circuits connected to the distribution
part of the building’s low-voltage MAINS
installation.
Measurement Category IV is applicable to test and
measuring circuits connected at the source of the
building’s low-voltage MAINS installation.
Conforms to European Union directives.
Certified by CSA Group to North American safety
standards.
~
Conforms to relevant Australian Safety and EMC
standards.
This product complies with the WEEE Directive
marking requirements. The affixed label indicates
that you must not discard this electrical/electronic
product in domestic household waste. Product
Category: With reference to the equipment types in
the WEEE Directive Annex I, this product is
classed as category 9 "Monitoring and Control
Instrumentation" product. Do not dispose of this
product as unsorted municipal waste.
Find Quality Products Online at: sales@GlobalTestSupply.com
www.GlobalTestSupply.com
LIMITED WARRANTY AND LIMITATION OF LIABILITY
This Fluke product will be free from defects in material and
workmanship for one year from the date of purchase. This warranty
does not cover fuses, disposable batteries, or damage from accident,
neglect, misuse, alteration, contamination, or abnormal conditions of
operation or handling. Resellers are not authorized to extend any
other warranty on Fluke’s behalf. To obtain service during the
warranty period, contact your nearest Fluke authorized service
center to obtain return authorization information, then send the
product to that Service Center with a description of the problem.
THIS WARRANTY IS YOUR ONLY REMEDY. NO OTHER
WARRANTIES, SUCH AS FITNESS FOR A PARTICULAR
PURPOSE, ARE EXPRESSED OR IMPLIED. FLUKE IS NOT
LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR
CONSEQUENTIAL DAMAGES OR LOSSES, ARISING FROM ANY
CAUSE OR THEORY. Since some states or countries do not allow
the exclusion or limitation of an implied warranty or of incidental or
consequential damages, this limitation of liability may not apply to
you.
11/99
Find Quality Products Online at: sales@GlobalTestSupply.com
www.GlobalTestSupply.com
Loading...