Supplement
Manual Title: i410/i1010 Instruction Sheet
Part Number: 617677 Supplement Issue: 3
Print Date: Sept. 1996 Issue Date: 7/15
Revision/Date: 2, 6/05 Page Count: 2
This supplement contains information
necessary to ensure the accuracy of the
above manual.
© 2009-2015 Fluke Corporation. All rights reserved.
I410/i1010 Instruction Sheet Supplement
Change #1, 51505, 513
Under Safety Information, add:
• Do not use around explosive gas or vapor.
• Do not use in a damp or wet environment.
• Do not use a current measurement as an
indication that a circuit is safe to touch. A
voltage measurement is necessary to
know if a circuit is hazardous.
• Do not exceed the Measurement Category
(CAT) rating of the lowest rated individual
component of a Product, probe, or
accessory.
• Limit operation to the specified
measurement category, voltage, or
amperage ratings.
• Do not use and disable the Product if it is
damaged.
Under Specifications, replace Safety section with:
Safety
600 V, CAT. III, Pollution Degree 2,
IEC 61010-1, IEC 61010-2-032
7/15 1
Supplement i410/i1010 Instruction Sheet
Change #2, 513
Replace the Symbols table, with:
Symbol Meaning
AC (Alternating Current)
Earth ground
DC (Direct Current)
Product is protected by double insulation.
Application around and removal from
HAZARDOUS LIVE conductors is permitted.
Examined and licensed by TÜV Product
Services.
WARNING - RISK OF DANGER. Consult user
documentation.
WARNING. HAZARDOUS VOLTAGE. Risk of
electric shock.
Conforms to European Union directives.
Certified by CSA Group to North American
safety standards.
This product complies with the WEEE Directive
marking requirements. The affixed label
indicates that you must not discard this
electrical/electronic product in domestic
household waste. Product Category: With
reference to the equipment types in the WEEE
Directive Annex I, this product is classed as
category 9 "Monitoring and Control
Instrumentation" product. Do not dispose of
this product as unsorted municipal waste.
2 7/15
Loading...