Fluke 810 Technical Guide

Page 1
Fluke 810 Diagnostic Report
The Fluke 810 Vibration Tester makes tracking machine health easy with Viewer PC software. The included Viewer software helps you quickly generate .PDF-format reports that include your drive train’s setup and diagnostic information, as well as the backup spectra. The software also lets you tell a more complete story by uploading images of your machinery (.JPG or Fluke .IS2 format). This document is a sample Fluke 810 diagnostic report. Actual report appearance will depend on the data captured and images selected for inclusion. To learn more, visit www.fluke.com/viewer-software or email vibration@fluke.com.
Date:10/12/2010 5:50 PM
810 Vibration Tester Diagnostic Report
Device Serial Number : VibrationTester1
M
achine Setup Name : USCC
M
easurement Date/Time : 05/18/2010 11:48:10
D
rive Train
Fault description Fault severity Severity Score Severity Scale
Pump Free End Ball Bearing Wear Moderate 31/100
Pump Drive End Ball Bearing Wear Moderate 30/100
Pump Drive End Looseness Or Bearing
Clearance Problem
Slight 8/100
Image
Recommendations
Recommendations Priority Priority Description
Monitor All Pump Bearings For Increased
Vibration
2 Desirable
Page 2
L
ocation : Location 2
Range : High range
Axis : Axial
X Axis Unit : Orders
Y Axis Unit : mm/sec
Date:10/12/2010 5:50 PM
Location : Location 2
Range : Low range
Axis : Axial
X Axis Unit : Orders
Y Axis Unit : mm/sec
Page 3
L
ocation : Location 2
Range : High range
Axis : Tangential
X Axis Unit : Orders
Y Axis Unit : mm/sec
Date:10/12/2010 5:50 PM
Location : Location 2
Range : Low range
Axis : Tangential
X Axis Unit : Orders
Y Axis Unit : mm/sec
Page 4
L
ocation : Location 2
Range : High range
Axis : Radial
X Axis Unit : Orders
Y Axis Unit : mm/sec
Date:10/12/2010 5:50 PM
Location : Location 2
Range : Low range
Axis : Radial
X Axis Unit : Orders
Y Axis Unit : mm/sec
Page 5
L
ocation : Location 3
Range : High range
Axis : Axial
X Axis Unit : Orders
Y Axis Unit : mm/sec
Date:10/12/2010 5:50 PM
Location : Location 3
Range : Low range
Axis : Axial
X Axis Unit : Orders
Y Axis Unit : mm/sec
Page 6
L
ocation : Location 3
Range : High range
Axis : Tangential
X Axis Unit : Orders
Y Axis Unit : mm/sec
Date:10/12/2010 5:50 PM
Location : Location 3
Range : Low range
Axis : Tangential
X Axis Unit : Orders
Y Axis Unit : mm/sec
Page 7
L
ocation : Location 3
Range : High range
Axis : Radial
X Axis Unit : Orders
Y Axis Unit : mm/sec
Date:10/12/2010 5:50 PM
Location : Location 3
Range : Low range
Axis : Radial
X Axis Unit : Orders
Y Axis Unit : mm/sec
Page 8
L
ocation : Location 4
Range : High range
Axis : Axial
X Axis Unit : Orders
Y Axis Unit : mm/sec
Date:10/12/2010 5:50 PM
Location : Location 4
Range : Low range
Axis : Axial
X Axis Unit : Orders
Y Axis Unit : mm/sec
Page 9
L
ocation : Location 4
Range : High range
Axis : Axial
X Axis Unit : Orders
Y Axis Unit : mm/sec
Date:10/12/2010 5:50 PM
Location : Location 4
Range : Low range
Axis : Axial
X Axis Unit : Orders
Y Axis Unit : mm/sec
Page 10
L
ocation : Location 4
Range : High range
Axis : Radial
X Axis Unit : Orders
Y Axis Unit : mm/sec
Date:10/12/2010 5:50 PM
Location : Location 4
Range : Low range
Axis : Radial
X Axis Unit : Orders
Y Axis Unit : mm/sec
Page 11
Date:10/12/2010 5:50 PM
ault description : Pump Free End Ball Bearing Wear
F
Fault severity : Moderate (31)
Cited peak number Bearing Axis Vibration amplitude Order Range
Cited peak1 Location4 Axial 2.36 mm/sec 9.48 High
Cited peak2 Location4 Tangential 1.44 mm/sec 9.31 High
Cited peak3 Location4 Axial 0.46 mm/sec 10.8 High
Cited peak4 Location4 Tangential 0.25 mm/sec 5.32 High
Cited peak5 Location4 Radial 0.20 mm/sec 3.79 Low
Cited peak6 Location4 Radial 0.20 mm/sec 10.3 High
Cited peak7 Location4 Radial 0.18 mm/sec 11.6 High
Page 12
Date:10/12/2010 5:50 PM
ault description : Pump Drive End Ball Bearing Wear
F
Fault severity : Moderate (30)
Cited peak number Bearing Axis Vibration amplitude Order Range
Cited peak1 Location3 Axial 1.06 mm/sec 6.57 High
Cited peak2 Location3 Axial 0.91 mm/sec 9.55 High
Cited peak3 Location3 Radial 0.88 mm/sec 6.8 High
Cited peak4 Location3 Tangential 0.76 mm/sec 10.7 High
Cited peak5 Location3 Radial 0.72 mm/sec 6.45 High
Cited peak6 Location3 Tangential 0.34 mm/sec 5.34 High
Cited peak7 Location3 Radial 0.24 mm/sec 3.65 Low
Page 13
Date:10/12/2010 5:50 PM
ault description : Pump Drive End Looseness Or Bearing Clearance Problem
F
Fault severity : Slight (8)
Cited peak number Bearing Axis Vibration amplitude Order Range
Cited peak1 Location3 Axial 1.08 mm/sec 7 High
Cited peak2 Location3 Axial 1.05 mm/sec 6 High
Cited peak3 Location3 Radial 0.78 mm/sec 6 High
Cited peak4 Location3 Radial 0.70 mm/sec 7 High
Cited peak5 Location3 Tangential 0.34 mm/sec 6 High
Cited peak6 Location3 Axial 0.23 mm/sec 9 High
Cited peak7 Location3 Tangential 0.22 mm/sec 4.67 Low
Cited peak8 Location3 Tangential 0.22 mm/sec 8 High
Cited peak9 Location3 Axial 0.21 mm/sec 4.67 Low
Page 14
M
achine Setup Details
Machine Setup Name : USCC
Setup Field Input
Motor type AC
AC motor with VFD Yes
Speed in RPM 717
Nominal hp 50
Motor mounted Horizontal
Motor has Roller bearing
Motor detached from drive train No
Motor close-coupled No
Coupling between motor and next component Yes
Next component Pump
Date:10/12/2010 5:50 PM
Driven component bearing type Roller bearing
Pump type Centrifugal
Impeller is supported by Overhung
No. of pump vanes or blades [optional]
This document is a sample Fluke 810 diagnostic report. Actual report appearance will depend on the data captured and images selected for inclusion. To learn more, visit www.fluke.com/viewer-software or email vibration@fluke.com.
Fluke. Keeping your world up and running.
Fluke Corporation
PO Box 9090, Everett, WA 98206 U.S.A.
Fluke Europe B.V.
PO Box 1186, 5602 BD Eindhoven, The Netherlands
Modification of this document is not permitted without written permission from Fluke Corporation.
®
For more information call:
In the U.S.A. (800) 443-5853 or Fax (425) 446-5116 In Europe/M-East/Africa +31 (0) 40 2675 200 or Fax +31 (0) 40 2675 222 In Canada (800)-36-FLUKE or Fax (905) 890-6866 From other countries +1 (425) 446-5500 or Fax +1 (425) 446-5116 Web access: http://www.fluke.com
©2010 Fluke Corporation. Specifications subject to change without notice. Printed in U.S.A. 11/2010 3951929A F-EN-N
Loading...