Fluke 810 Data Sheet

Fluke 810

Vibration Tester

The most advanced troubleshooting tool for mechanical
maintenance teams who need an answer now.
The unique diagnostic technology helps you
quickly identify and prioritize mechanical
problems, putting the expertise of a vibration
analyst in your hands.

You take pride in your facility, your team, and your
work. You do what it takes to keep things up and
running, but sometimes there is not enough time or
resources to keep up with the workload, let alone be
proactive about mechanical maintenance. The Fluke
810 Vibration Tester puts you one step ahead by using
a simple step-by-step process to report on machine
faults the first time measurements are taken, without
prior measurement history. The combination of diag­noses, severity and repair recommendations help you
make informed maintenance decisions and address
critical problems first.

Use the Fluke 810 Vibration Tester to:

• Troubleshoot problem equipment and understand
the root cause of failure

• Survey equipment before and after planned mainte­nance and confirm the repair

• Commission new equipment and ensure proper
installation

• Provide quantifiable proof of equipment condition
and drive investment in repair or replacement

• Prioritize and plan repair activities and operate more
efficiently

• Anticipate equipment failures before they happen
and take control of spare parts inventories

• Train new or less-experienced technicians and build
confidence and skill across the team

Features and benefits

• On-board identification and location of the most

common mechanical faults (bearings, misalign­ment, unbalance, looseness) focus maintenance

efforts on root cause, reducing unplanned downtime

• Fault severity scale with four severity levels help
you prioritize maintenance work

• Repair recommendations advise technicians on
corrective action

• On-board context sensitive help provide real-time
tips and guidance to new users

• 2 GB expandable on-board memory provides
enough space for your machinery’s data

• Self-test function ensures optimal performance and
more time on the job

• Laser tachometer for accurate machine running
speed promotes confident diagnoses

• Tri-axial accelerometer reduces measurement time
by 2/3 over single axis accelerometers

•

Viewer PC Software expands data storage and
tracking capacity

Tester specifications

Diagnostic specifications

Standard faults Unbalance, looseness, misalignment and bearing failures

Analysis for Motors, fans, blowers, belts and chain drives, gearboxes, couplings, centrifugal

Machine rotational speed range 200 rpm to 12000 rpm

Diagnosis details Plain-text diagnosis, fault severity (slight, moderate, serious, extreme), repair

Electrical specifications

Ranging Automatic

A/D converter 4 channel, 24 bit

Usable frequency bandwidth 5 Hz to 20 kHz

Digital signal processing functions Automatically configured anti-alias filter, high-pass filter, decimation, overlap-

Sampling rate 2.56 kHz to 51.2 kHz

Dynamic range 128 dB

Signal to noise ratio 100 dB

FFT resolution 800 lines

Spectral windows Hanning

Frequency units Hz, orders, cpm

Amplitude units in/sec, mm/sec, VdB (US), VdB* (Europe)

Non-volatile memory SD micro memory card, 2 GB internal + user accessible slot for additional 2 GB

General specifications

Dimensions (HxDxW) 18.56 cm x 7.00 cm x 26.72 cm (7.30 in x 2.76 in x 10.52 in)

Weight (with battery) 1.9 kg (4.2 lb)

Display ¼ VGA, 320 × 240 Color (5.7 inch diagonal) TFT LCD with LED backlight

Input/Output Connections

Triaxial sensor connection 4 pin M12 connector

Single axis sensor connection BNC connector

Tachometer Connection Mini DIN 6 pin connector

PC Connection Mini ‘B’ USB (2.0) connector

Battery

Battery type Lithium-ion, 14.8 V, 2.55 Ah

Battery charging time Three hours

Battery discharge time Eight hours (under normal conditions)

AC adapter

Input voltage 100 Vac to 240 Vac

Input frequency 50/60 Hz

Operating system WinCE 6.0 Core

Language Support English, French, German, Italian, Japanese, Portuguese, Simplified Chinese,

Warranty Three-years

pumps, piston pumps, sliding vane pumps, propeller pumps, screw pumps, rotary
thread/gear/lobe pumps, piston compressors, centrifugal compressors, screw
compressors, closed coupled machines, spindles

details, cited peaks, spectra

ping, windowing, FFT, and averaging

storage

Spanish

2 Fluke Corporation Fluke 810 Vibration Tester

Tester specifications continued

Environmental

Operating temperature 0 °C to 50 °C (32 °F to 122 °F)

Storage temperature -20 °C to 60 °C (-4 °F to 140 °F)

Operating humidity 10 % to 95 % RH (non-condensing)

Agency approvals CHINA RoHS, CSA, CE, C TICK, WEEE

Electromagnetic compatibility EN 61326-1:2006, EN 61010:1:2001 2nd ed.

Sensor specifications

Sensor type Accelerometer

Sensitivity 100 mV/g (± 5 %, 25 °C)

Acceleration range 80 g peak

Amplitude nonlinearity 1 %

Frequency response

Z 2 - 7,000 Hz ± 3dB

X, Y 2 - 5,000 Hz ± 3dB

Power requirement (IEPE) 18 V dc to 30 V dc, 2 mA to 10 mA

Bias output voltage 12 V dc

Grounding Case grounded

Sensing element design PZT ceramic / shear

Case material 316L stainless steel

Mounting 10-32 captive socket head screw, 2-pole rare earth magnet (48 lb pull strength)

Output connector 4-Pin, M12

Mating connector M12 - F4D

Non-volatile memory TEDS 1451.4 compatible

Vibration limit 500 g peak

Shock limit 5000 g peak

Electromagnetic sensitivity, equivalent g 100 μg/gauss

Sealing Hermetic

Temperature range -50 °C to 120 °C (-58 °F to 248 °F) ± 7 %

Warranty One-year

Tachometer specifications

Dimensions (DxW) 2.86 cm x 12.19 cm (1.125 in x 4.80 in)

Weight 96 g (3.4 oz) with cable

Power Powered by 810 Vibration Tester

Detection Laser Diode Class 2

Range 6.0 to 99,999 rpm

Accuracy

6.0 to 5999.9 rpm ± 0.01 % and ± 1 digit

5999.9 to 99999 rpm ± 0.05 % and ± 1 digit

Resolution 0.1 rpm

Effective range 1 cm to 100 cm (0.4 in to 39.27 in)

Response time 1 second (> 60 rpm)

3 Fluke Corporation Fluke 810 Vibration Tester

Tachometer specifications continued

Controls Measure on/off transparent button

Interface 6 Pin Mini DIN

Cable length 50 cm (19.586 in)

Warranty One-year

Tachometer accessories Reflective tape:

1.5 cm x 52.5 cm (0.59 in × 20.67 in)

Viewer PC Software

Minimum hardware requirements 1 GB RAM

Operating system requirements Windows XP, Vista, Windows 7

Viewer PC Software

The Fluke 810 Vibration Tester
includes Viewer PC software,
expanding your data storage and
tracking capability. With Viewer
you can:

• Generate diagnostic reports
and track the severity of your
machine’s condition

• Create machine setups with the
convenience of your keyboard
and mouse, and transfer the data
to your 810 Vibration Tester

• View diagnosis and vibration
spectra in greater detail

• Import and store JPEG images
and Fluke IS2 thermal images for
a more complete view of your
machine’s condition

Industry-leading training…
on your terms

The Fluke 810 Vibration Tester
takes the guesswork out of
diagnosing the most common
mechanical problems, but a better
understanding of vibration and its
impact on your equipment will help
you or your team be more aware
of issues that may come up in the
future. Fluke has partnered with
Mobius Institute, an industry leader
in vibration training, to provide
you with a self-paced DVD train­ing program using award-winning
Mobius Institute interactive training
tools. This DVD is available with
purchase and will help you learn
more about the basics of vibration
and how to fully utilize the features
and functionality of the Fluke 810
Vibration Tester.

Fluke-810 Vibration Tester
Includes:

Vibration Tester with diagnostic technology,
tri-axial TEDS accelerometer, accelerometer
magnet mount, accelerometer mounting pad kit
with adhesive, accelerometer quick-disconnect
cable, laser tachometer and storage pouch, smart
battery pack with cable and adapters, shoulder
strap, adjustable hand strap, Viewer PC software,
mini-USB to USB cable, getting started guide,
illustrated quick reference guide, users manual
CD-ROM, training DVD, and hard carrying case.

Fluke. Keeping your world
up and running.

Fluke Corporation
PO Box 9090, Everett, WA 98206 U.S.A.

Fluke Europe B.V.
PO Box 1186, 5602 BD
Eindhoven, The Netherlands

For more information call:
In the U.S.A. [phone] or
Fax [phone]
In Europe/M-East/Africa [phone] or
Fax [phone]
In Canada (800)-36-FLUKE or
Fax [phone]
From other countries [phone] or
Fax [phone]
Web access: http://www.fluke.com

©2009-2011 Fluke Corporation.
Specifications subject to change without notice.
Printed in U.S.A. 4/2011 3564541B D-EN-N

Modification of this document is not permitted
without written permission from Fluke Corporation.

®

4 Fluke Corporation Fluke 810 Vibration Tester