The 5520A/5500A
Multi-Product Calibrators
Extended Specifications
December 1997
General Specifications
5520A/5500A
Warmup Time Twice the time since last warmed up, to a maximum of 30 minutes
Settling Time Less than 5 seconds for all functions and ranges except as noted
Standard Interfaces IEEE-488 (GPIB), RS-232, 5725A (5500A only)
Temperature Performance Operating: 0°C to 50°C
Temperature Coefficient Temperature coefficient for temperatures outside tcal ±5°C is 10% of the 90-day specification
Relative Humidity Operating: <80% to 30°C, <70% to 40°C, <40% to 50°C
Altitude Operating: 3,050m (10,000 ft) maximum
Safety Designed to comply with IEC 1010-1 (1992-1); ANSI/ISA-S82.01-1994;
Analog Low Isolation 20V
EMC 5520A: Designed to comply with IEC 61326-1/1997
Line Power Line Voltage (selectable): 100V, 120V, 220V, 240V
Power Consumption 5520A: 600 VA
Dimensions Height:17.8 cm (7 in), standard rack increment, plus 1.5 cm (0.6 in) for feet on bottom of unit
Weight (without options) 5520A: 22 kg (49 lb)
Absolute Uncertainty Definition 5500A and 5520A uncertainty specifications include stability, temperature coefficient, linearity,
Specification Confidence Interval >99%
Calibration (tcal): 15°C to 35°C
Storage: -20°C to 70°C
(or 1-year, as applicable) per °C
Storage: <95%, noncondensing
Non-operating: 12,200m (40,000 ft) maximum
CAN/CSA-C22.2 No. 1010.1-92
5500A: Designed to comply with FCC Rules Part 15
Line Frequency: 47 to 63 Hz
Line Voltage Variation: ±10% about line voltage setting
5500A: 300 VA
Width: 43.2 cm (17 in), standard rack width
Depth: 47.3 cm (18.6 in) overall
5500A: 20 kg (44 lb)
line and load regulation and the traceability of the external standards used for calibration.
You do not need to add anything to determine the total uncertainty of your calibrator for the
temperature range indicated.
2 Fluke Corporation 5520A/5500A Multi-Product Calibrators Extended Specifications
DC V oltage Specifications
5520A
Absolute Uncertainty, tcal ±5°C
±(ppm of output + µV)
Ranges
90 Days 1 Year
0 to 329.9999 mV 20 + 1.5 25 + 1.5 3 + 1 0.1 µV50Ω
0 to 3.299999V 9 + 2 11 + 2 2 + 1.5 1 µV 10 mA
0 to 32.99999V 10 + 15 12 + 15 2 + 10 10 µV 10 mA
30 to 329.9999V 15 + 150 18 + 150 2.5 + 100 100 µV5 mA
100 to 1000V 15 + 1500 18+ 1500 3 + 300 1000 µV5 mA
Auxiliary Output (dual output mode only)
0 to 329.999 mV 300 + 350 400 + 350 30 + 100 1 µV5 mA
0.33 to 3.29999V 300 + 350 400 + 350 30 + 100 10 µV5 mA
3.3 to 7V 300 + 350 400 + 350 30 + 100 100 µV5 mA
TC Output and Measure in Linear 10 µV/°C and 1 mV/°C Modes
0 to 329.999 mV 40 + 3 50 + 3 5 + 2 0.1 µV10Ω
2
5500A
Absolute Uncertainty, tcal ±5°C
±(ppm of output + µV)
Ranges
90 Days 1 Year
0 to 329.9999 mV 50 + 3 60 + 3 5 + 1 0.1 µV50Ω
0 to 3.299999V 40 + 5 50 + 5 4 + 3 1 µV 10 mA
0 to 32.99999V 40 + 50 50 + 50 4 + 30 10 µV 10 mA
30 to 329.9999V 45 + 500 55 + 500 4.5 + 300 100 µV5 mA
100 to 1000V 45 + 1500 55 + 1500 4.5 + 900 1000 µV5 mA
Auxiliary Output (dual output mode only)
0 to 329.999 mV 300 + 350 400 + 350 30 + 100 1 µV5 mA
0.33 to 3.29999V 300 + 350 400 + 350 30 + 100 10 µV5 mA
TC Output and Measure in Linear 10 µV/°C
0 to 329.999 mV 50 + 3 60 + 3 5 + 1 0.1 µV10Ω
1
Remote sensing is not provided. Output resistance is <5 mΩ for outputs ≥0.33V. The AUX output has an output resistance of <1Ω.
TC output has an output impedance of 10Ω ±1Ω.
2
Two channels of dc voltage output are provided.
Note: Maximum voltage output is 1020V.
2
Stability
24 Hours, ±1°C
±(ppm of output
+ µV)
Stability
24 Hours, ±1°C
±(ppm of output
+ µV)
Resolution
Resolution
Maximum
Burden
Current
Maximum
Burden
Current
1
1
5520A/5500A Multi-Product Calibrators Extended Specifications Fluke Corporation 3
DC Current Specifications
5520A
Absolute Uncertainty, tcal ±5°C
Ranges
0 to 329.999 µA 120 + 0.02 150 + 0.02 1 nA 10V 400 µH
0 to 3.29999 mA 80 + 0.03 100 + 0.03 0.01 µA 10V 400 µH
0 to 32.9999 mA 80 + 0.2 100 + 0.2 0.1 µA 7V 400 µH
0 to 329.999 mA 80 + 2 100 + 2 1 µA 7V 400 µH
0 to 2.99999A 160 + 40 200 + 40 10 µA 6V 400 µH
0 to 10.9999A 380 + 330 500 + 330 100 µA 4V 400 µH
11 to 20.5A
1
At 20°C, full 20.5A output is available continuously for 20 minutes.
1
±(ppm of output + µA)
90 Days 1 Year
800 + 750 1000 + 750 100 µA 4V 400 µH
Resolution
5500A
Absolute Uncertainty, tcal ±5°C
Ranges
0 to 3.29999 mA 0.010 + 0.05 0.013 + 0.05 0.01 µA 4.5V 1 µH
0 to 32.9999 mA 0.008 + 0.25 0.01 + 0.25 0.1 µA 4.5V 200 µH
0 to 329.999 mA 0.008 + 3.3 0.01 + 3.3 1 µA 3.0V 200 µH
0 to 2.19999A 0.023 + 44 0.03 + 44 10 µA 3.4V 200 µH
0 to 10.9999A 0.038 + 330 0.06 + 330 100 µA 2.5V 200 µH
5725A Amplifier
0 to 11A 0.03 + 330 0.04 + 330 100 µA 4V 400 µH
±(% of output + µA)
90 Days 1 Year
Resolution
Compliance
Voltage
Compliance
Voltage
Maximum Inductive
Load
Maximum Inductive
Load
4 Fluke Corporation 5520A/5500A Multi-Product Calibrators Extended Specifications
Resistance Specifications
5520A
Floor
2
Resolution
Allowable Current
Absolute Uncertainty, tcal ±5°C ±(ppm of output + floor)
1
Ranges
ppm of output
90 Days 1 Year
Time, Temperature Since Ω Zero
12 Hours ±1°C 7 Days ±5°C
0 to 10.9999Ω 35 40 0.001Ω 0. 01Ω 0.0001Ω 1 to 125 mA
11 to 32.9999Ω 25 30 0.0015Ω 0.015Ω 0.0001Ω 1 to 125 mA
33 to 1 09.9999Ω 22 28 0.0015Ω 0.015Ω 0.0001Ω 1 to 70 mA
110 to 329.9999Ω 22 28 0.002Ω 0.02Ω 0.0001Ω 1 to 40 mA
330Ω to 1.099999 kΩ 22 28 0.002Ω 0.02Ω 0.001Ω 250 µA to 18 mA
1.1 to 3.299999 kΩ 22 28 0.02Ω 0.2Ω 0.001Ω 250 µA to 5 mA
3.3 to 10.99999 kΩ 22 28 0.02Ω 0.1Ω 0.01Ω 25 µA to 1.8 mA
11 to 32.99999 kΩ 22 28 0.2Ω 1Ω 0.01Ω 25 µA to 0.5 mA
33 to 109.9999 kΩ 22 28 0.2Ω 1Ω 0.1Ω 2.5 µA to 0.18 mA
110 to 329.9999 kΩ 25 32 2Ω 10Ω 0.1Ω 2.5 µA to 0.05 mA
330 kΩ to 1.099999 MΩ 25 32 2Ω 10Ω 1Ω 250 nA to 0.018 mA
1.1 to 3.299999 MΩ 40 60 30Ω 150Ω 1Ω 250 nA to 5 µA
3.3 to 10.99999 MΩ 110 130 50Ω 250Ω 10Ω 25 nA to 1.8 µA
11 to 32.99999 MΩ 200 250 2500Ω 2500Ω 10Ω 25 nA to 500 nA
33 to 109.9999 MΩ 400 500 3000Ω 3000Ω 100Ω 2.5 nA to 180 nA
110 to 329.999 MΩ 2500 3000 100000Ω 100000Ω 1000Ω 2.5 nA to 50 nA
330 to 1100 MΩ 12000 15000 500000Ω 500000Ω 10000Ω 1 nA to 13 nA
1
Continuously variable from 0 to 1.1 GΩ.
2
Applies for 4-WIRE compensation only. For COMP OFF and 2-WIRE COMP, add 5 µV per amp of stimulus current to the floor specification.
For example, in 2-wire mode, at 1 kΩ, the floor specification within 12 hours of an ohms zero cal for a measurement current of 250 µA
is 0.002Ω + 5 µV/250 µA = 0.022Ω.
5500A
Absolute Uncertainty, tcal ±5°C
Ranges
1
±(% of output + Ω)
90 Days 1 Year
0 to 10.999Ω 0.009 + 0.008
11 to 32.999Ω 0.009 + 0.015
33 to 109.999Ω 0.007 + 0.015
110 to 329.999Ω 0.007 + 0.015
3
3
3
3
330Ω to 1.09999 kΩ 0.007 + 0.06 0.009 + 0.06 0.01Ω 250 µA to 18 mA
1.1 to 3.29999 kΩ 0.007 + 0.06 0.009 + 0.06 0.01Ω 250 µA to 5 mA
3.3 to 10.9999 kΩ 0.007 + 0.6 0.009 + 0.6 0.1Ω 25 µA to 1.8 mA
11 to 32.9999 kΩ 0.007 + 0.6 0.009 + 0.6 0.1Ω 25 µA to 0.5 mA
33 to 109.999 kΩ 0.008 + 6 0.011 + 6 1Ω 2.5 µA to 0.18 mA
110 to 329.999 kΩ 0.009 + 6 0.012 + 6 1Ω 2.5 µA to 0.05 mA
330 kΩ to 1.09999 MΩ 0.011 + 55 0.015 + 55 10Ω 250 nA to 0.018 mA
1.1 to 3.29999 MΩ 0.011 + 55 0.015 + 55 10Ω 250 nA to 5 µA
3.3 to 10.9999 MΩ 0.045 + 550 0.06 + 550 100Ω 25 nA to 1.8 µA
11 to 32.9999 MΩ 0.075 + 550 0.1 + 550 100Ω 25 nA to 500 nA
33 to 109.999 MΩ 0.4 + 5500 0.5 + 5500 1000Ω 2.5 nA to 180 nA
110 to 329.999 MΩ 0.4 + 16500 0.5 + 16500 1000Ω 2.5 nA to 60 nA
1
Continuously variable from 0 to 330 MΩ.
2
Applies for COMP OFF (to the 5500A Calibrator front panel NORMAL terminals) and 2-wire and 4-wire compensation.
3
The floor added is improved to 0.006Ω (0-10.99Ω range) and 0.010Ω (11-329.999Ω range) if the 5500A is zeroed
within 8 hours and temperature is ±1°C of zeroing ambient temperature.
2
0.012 + 0.008
0.012 + 0.015
0.009 + 0.015
0.009 + 0.015
Resolution
3
3
3
3
0.001Ω 1 to 125 mA
0.001Ω 1 to 125 mA
0.001Ω 1 to 70 mA
0.001Ω 1 to 40 mA
Allowable Current
5520A/5500A Multi-Product Calibrators Extended Specifications Fluke Corporation 5
AC V oltage (Sinewave) Specifications
5520A
Absolute Uncertainty, tcal ±5°C
Ranges
1.0 to 32.999 mV 10 to 45 Hz 600 + 6 800 + 6 1 µV50Ω
33 to 329.999 mV 10 to 45 Hz 400 + 8 500 + 8 1 µV50Ω
0.33 to 3.29999V 10 to 45 Hz 250 + 50 300 + 50 10 µV 10 mA
3.3 to 32.9999V 10 to 45 Hz 250 + 650 300 + 650 100 µV 10 mA
33 to 329.999V 45 Hz to 1 kHz 150 + 2000 190 + 2000 1 mV 5 mA, except
330 to 1000V 45 Hz to 1 kHz 250 + 10000 300 + 10000 10 mV 2 mA, except
Auxiliary Output (dual output mode only)
10 to 329.999 mV 10 to 20 Hz 0.15% + 370 0.2% + 370 1 µV5 mA
0.33 to 3.29999V 10 to 20 Hz 0.15% + 450 0.2% + 450 10 µV5 mA
3.3 to 5V 10 to 20 Hz 0.15% + 450 0.2% + 450 100 µV5 mA
1
Remote sensing is not provided. Output resistance is <5 mΩ for outputs ≥0.33V. The AUX output resistance is <1Ω.
The maximum load capacitance is 500 pF, subject to the maximum burden current limits.
2
There are two channels of voltage output. The maximum frequency of the dual output is 30 kHz for the 5520A.
Note: Maximum voltage output is 1020V.
Frequency
45 Hz to 10 kHz 120 + 6 150 + 6
10 to 20 kHz 160 + 6 200 + 6
20 to 50 kHz 800 + 6 1000 + 6
50 to 100 kHz 3000 + 12 3500 + 12
100 to 500 kHz 6000 + 50 8000 + 50
45 Hz to 10 kHz 110 + 8 130 + 8
10 to 20 kHz 120 + 8 150 + 8
20 to 50 kHz 300 + 8 350 + 8
50 to 100 kHz 600 + 32 800 + 32
100 to 500 kHz 1600 + 70 2000 + 70
45 Hz to 10 kHz 100 + 25 120 + 25
10 to 20 kHz 160 + 50 190 + 50
20 to 50 kHz 250 + 50 300 + 50
50 to 100 kHz 550 + 125 700 + 125
100 to 500 kHz 2000 + 600 2400 + 600
45 Hz to 10 kHz 125 + 200 150 + 200
10 to 20 kHz 220 + 600 240 + 600
20 to 50 kHz 300 + 600 350 + 600
50 to 100 kHz 750 + 1600 900 + 1600
1 to 10 kHz 160 + 6000 200 + 6000 20 mA for
10 to 20 kHz 220 + 6000 250 + 6000 45 to 65 Hz
20 to 50 kHz 600 + 20000 800 + 20000
50 to 100 kHz 1600 + 50000 2000 + 50000
1 to 5 kHz 200 + 10000 250 + 10000 6 mA for
5 to 10 kHz 250 + 10000 300 + 10000 45 to 65 Hz
2
20 to 45 Hz 0.08% + 370 0.1% + 370
45 Hz to 1 kHz 0.08% + 370 0.1% + 370
1 to 5 kHz 0.15% + 450 0.2% + 450
5 to 10 kHz 0.3% + 450 0.4% + 450
10 to 30 kHz 0.6% + 9 00 0.8% + 900
20 to 45 Hz 0.08% + 450 0.1% + 450
45 Hz to 1 kHz 0.07% + 450 0.09% + 450
1 to 5 kHz 0.15% + 1400 0.2% + 1400
5 to 10 kHz 0.3% + 1400 0.4% + 1400
10 to 30 kHz 0.6% + 2800 0.8% + 2800
20 to 45 Hz 0.08% + 450 0.1% + 450
45 Hz to 1 kHz 0.07% + 450 0.09% + 450
1 to 5 kHz 0.15% + 1400 0.2% + 1400
5 to 10 kHz 0.3% + 1400 0.4% + 1400
±(ppm of output + µV)
90 Days 1 Year
Resolution
Maximum
Burden
1
6 Fluke Corporation 5520A/5500A Multi-Product Calibrators Extended Specifications
5500A
Absolute Uncertainty, tcal ±5°C
Ranges
Frequency
±(% of output + µV)
Resolution
90 Days 1 Year
1.0 to 32.999 mV 10 to 45 Hz 0.26 + 20 0.35 + 20 1 µV50Ω
45 Hz to 10 kHz 0.11 + 20 0.15 + 20
10 to 20 kHz 0.15 + 20 0.2 + 20
20 to 50 kHz 0.19 + 20 0.25 + 20
50 to 100 kHz 0.26 + 33 0.35 + 33
100 to 500 kHz 0.75 + 60 1 + 60
33 to 329.999 mV 10 to 45 Hz 0.19 + 50 0.25 + 50 1 µV50Ω
45 Hz to 10 kHz 0.04 + 20 0.05 + 20
10 to 20 kHz 0.08 + 20 0.1 + 20
20 to 50 kHz 0.12 + 40 0.16 + 40
50 to 100 kHz 0.17 + 170 0.24 + 170
100 to 500 kHz 0.53 + 330 0.7 + 330
0.33 to 3.29999V 10 to 45 Hz 0.11 + 250 0.15 + 250 10 µV 10 mA
45 Hz to 10 kHz 0.02 + 60 0.03 + 60
10 to 20 kHz 0.06 + 60 0.08 + 60
20 to 50 kHz 0.1 + 300 0.14 + 300
50 to 100 kHz 0.17 + 1700 0.24 + 1700
100 to 500 kHz 0.38 + 3300 0.5 + 3300
3.3 to 32.9999V 10 to 45 Hz 0.11 + 2500 0.15 + 2500 100 µV 10 mA
45 Hz to 10 kHz 0.03 + 600 0.04 + 600
10 to 20 kHz 0.06 + 2600 0.08 + 2600
20 to 50 kHz 0.14 + 5000 0.19 + 5000
50 to 100 kHz 0.17 + 17000 0.24 + 17000
33 to 329.999V 45 Hz to 1 kHz 0.04 + 6.6 mV 0.05 + 6.6 mV 1 mV
1 to 10 kHz 0.06 + 15 mV 0.08 + 15 mV 20 mA for
10 to 20 kHz 0.07 + 33 mV 0.09 + 33 mV
330 to 1000V 45 Hz to 1 kHz 0.04 + 80 mV 0.05 + 80 mV 10 mV
1 to 5 kHz 0.15 + 100 mV 0.20 + 100 mV 6 mA for
5 to 10 kHz 0.15 + 500 mV 0.20 + 500 mV
5725 Amplifier
10 to 329.999 mV 45 Hz to 1 kHz 0.04 + 80 mV 0.05 + 80 mV 50 mA
1 to 20 kHz 0.06 + 100 mV 0.08 + 100 mV 10 mV 70 mA
20 to 30 kHz 0.08 + 100 mV 0.1 + 100 mV 70 mA
100 to 750V 30 to 100 kHz 0.38 + 500 mV 0.5 + 500 mV 10 µV 70 mA
Auxiliary Output (dual output mode only)
2
10 to 329.999 mV 10 to 20 Hz 0.15 + 370 0.2 + 370 1 µV5 mA
20 to 45 Hz 0.08 + 370 0.1 + 370
45 Hz to 1 kHz 0.08 + 370 0.1 + 370
1 to 5 kHz 0.15 + 450 0.2 + 450
5 to 10 kHz 0.3 + 450 0.4 + 450
0.33 to 3.29999V 10 to 20 Hz 0.15 + 450 0.2 + 450 10 µV5 mA
20 to 45 Hz 0.08 + 450 0.1 + 450
45 Hz to 1 kHz 0.07 + 450 0.09 + 450
1 to 5 kHz 0.15 + 1400 0.2 + 1400
5 to 10 kHz 0.3 + 1400 0.4 + 1400
1
Remote sensing is not provided. Output resistance is <5 mΩ for outputs ≥0.33V. The AUX output resistance is <1Ω.
The maximum load capacitance is 500 pF, subject to the maximum burden current limits.
2
There are two channels of voltage output. The maximum frequency of the dual output is 10 kHz for the 5500A.
Note: Maximum voltage output is 1020V.
Maximum
1
Burden
5 mA, except
45 to 65 Hz
2 mA, except
45 to 65 Hz
5520A/5500A Multi-Product Calibrators Extended Specifications Fluke Corporation 7
AC Current (Sinewave) Specifications
5520A (LCOMP Off)
Ranges
29.00 to 329.99 µA 10 to 20 Hz 0.16% 0.1 µA 0.2% 0.1 µA 200 µH
0.33 to 3.2999 mA 10 to 20 Hz 0.16% 0.15 µA 0.2% 0.15 µA 200 µH
3.3 to 32.999 mA 10 to 20 Hz 0.15% 2 µA 0.18% 2 µA 50 µH
33 to 329.99 mA 10 to 20 Hz 0.15% 20 µA 0.18% 20 µA 50 µH
0.33 to 2.99999A 10 to 45 Hz 0.15% 100 µA 0.18% 100 µA 2.5 µH
3 to 10.9999A 45 to 100 Hz 0.05% 2000 µA 0.06% 2000 µA1 µH
11 to 20.5A
1
At 20°C, full 20.5A output is available continuously for 20 minutes.
2
For compliance voltages greater than 1V, add 1 mA/V to the floor specification from 1 to 5 kHz.
3
For compliance voltages greater than 1V, add 5 mA/V to the floor specification from 5 to 10 kHz.
1
Frequency
20 to 45 Hz 0.12% 0.1 µA 0.15% 0.1 µA
45 Hz to 1 kHz 0.1% 0.1 µA 0.125% 0.1 µA
1 to 5 kHz 0.25% 0.15 µA 0.3% 0.15 µA
5 to 10 kHz 0.6% 0.2 µA 0.8% 0.2 µA
10 to 30 kHz 1.2% 0.4 µA 1.6% 0.4 µA
20 to 45 Hz 0.1% 0.15 µA 0.125% 0.15 µA
45 Hz to 1 kHz 0.08% 0.15 µA0.1% 0.15 µA
1 to 5 kHz 0.16% 0.2 µA 0.2% 0.2 µA
5 to 10 kHz 0.4% 0.3 µA 0.5% 0.3 µA
10 to 30 kHz 0.8% 0.6 µA 1.0% 0.6 µA
20 to 45 Hz 0.075% 2 µA 0.09% 2 µA
45 Hz to 1 kHz 0.035% 2 µA 0.04% 2 µA
1 to 5 kHz 0.065% 2 µA 0.08% 2 µA
5 to 10 kHz 0.16% 3 µA 0.2% 3 µA
10 to 30 kHz 0.32% 4 µA 0.4% 4 µA
20 to 45 Hz 0.075% 20 µA 0.09% 20 µA
45 Hz to 1 kHz 0.035% 20 µA 0.04% 20 µA
1 to 5 kHz 0.08% 50 µA 0.10% 50 µA
5 to 10 kHz 0.16% 100 µA 0.2% 100 µA
10 to 30 kHz 0.32% 200 µA 0.4% 200 µA
45 Hz to 1 kHz 0.05% 100 µA 0.06% 100 µA
1 to 5 kHz
5 to 10 kHz
100 to 1 kHz 0.08% 2000 µA 0.10% 2000 µA
1 to 5 kHz 2.0% 2000 µA 2.5% 2000 µA
45 to 100 Hz 0.1% 5000 µA 0.12% 5000 µA1 µH
100 Hz to 1 kHz 0.13% 5000 µA 0.15% 5000 µA
1 to 5 kHz 2.0% 5000 µA 2.5% 5000 µA
2
3
0.5% 1000 µA 0.6% 1000 µA
2.0% 5000 µA 2.5% 5000 µA
Absolute Uncertainty, tcal ±5°C ±(% of output + µA)
90 Days 1 Year
Maximum
Inductive Load
8 Fluke Corporation 5520A/5500A Multi-Product Calibrators Extended Specifications
Loading...