Fluke 481 Data Sheet

Fluke 481
Radiation Survey Meter
The Fluke 481 Radiation Survey Meter is a portable and practical means for identifying irradiated goods, and for helping remediate contamination and safety issues while minimally impacting operations.
Technical Data
Features Include:
Detects skin-dose (beta particle) and deep-dose (gamma)
and X-ray radiation
Requires no adjustments; simple two button operation
Delivers quickly read, correct value through autoranging capability
Easily visible inside truck trailers and other low-light conditions
with automated backlight
Works reliably indoors or outdoors thanks to sealed case
30 % more accurate than other available meters
Delivers more than one week of continuous operation from two
9-volt alkaline batteries
Proven in use by state and local governmental emergency
response professionals, state inspectors, HAZMAT teams and nuclear power workers
Measures both dose and dose-rate
Useful for contamination-detection, general radiation area surveys,
radiation-level monitoring, and hazardous materials assessment
Ruggedized Fluke design
Fluke 481 Radiation Survey Meter
Detector
End users
Radiation detected
Specifications
Radiation detected
Operating ranges, response time
Accuracy
Detector
Automatic features
Power requirements
Warm-up time
Display LCD analog/digital with backlight
Modes
Environmental
Dimensions
(W x D x H)
Weight
Ion chamber
X-ray manufacturers
State inspectors
Government agencies
Police and fire departments
Emergency response and hazmat teams
Nuclear medicine labs
Hospital radiation safety officers
Nuclear power workers
beta, x-ray, gamma
Beta > 100 keV
Gamma > 7 keV
0 mR/h to 5 mR/h (8 sec) 0 mR/h to 50 mR/h (2.5 sec) 0 mR/h to 500 mR/h (2 sec) 0 R/h to 5 R/h (2 sec) 0 R/h to 50 R/h (2 sec)
Within 10 % of readings between 10 % and 100 % of full scale indication on any range, exclusive of energy response
Chamber (cc volume air
349 cc
ionization)
Chamber wall (phenolic) 246 mg/cm2
Chamber window (mylar) 6.6 mg/cm2
Beta slide 440 mg/cm2
Auto-zeroing, auto-ranging, and auto-backlight
Two 9 V alkaline, 200 hours operation
One minute
Analog 100 element bar graph 6.4 cm long. Bar
graph is divided into 5 major segments, each labeled with the appropriate value for the range of the instrument
Digital 2.5 digit display is followed by a
significant zero digit depending on the operating range of the instrument. The units of measurement are indicated on the display at all times. Digits are 6.4 mm (0.25 in) high. Low battery and freeze indicators are also provided on the display
Integrate mode Operates continuously 30 seconds after
the instrument has been turned on. Integration is performed even if the instrument is displaying in mR/h or R/h
Freeze mode Will place a tick mark on the bar graph
display to hold on the peak displayed value. The unit will continue to read and display current radiation values
Temperature range -4 °F to 122 °F
Relative humidity 0 % to 100 % (at 140 °F)
Geotropism < 1 %
10 cm x 20 cm x 15 cm (4 in x 8 in x 6 in)
1.11 kg (2.5 lb)
Fluke. Keeping your world up and running.
Fluke Corporation
PO Box 9090, Everett, WA 98206 U.S.A.
Fluke Europe B.V.
PO Box 1186, 5602 BD Eindhoven, The Netherlands
For more information call:
In the U.S.A. (800) 443-5853 or Fax (425) 446-5116 In Europe/M-East/Africa +31 (0) 40 2675 200 or Fax +31 (0) 40 2675 222 In Canada (800)-36-FLUKE or Fax (905) 890-6866 From other countries +1 (425) 446-5500 or Fax +1 (425) 446-5116 Web access: http://www.fluke.com
©2011 Fluke Corporation. Specifications subject to change without notice. Printed in U.S.A. 4/2011 4022637A D-EN
Modification of this document is not permitted without written permission from Fluke Corporation.
®
2 Fluke Corporation Fluke 481 Radiation Survey Meter
Loading...