Fluke 365 True-RMS Operating Manual
Users Manual
365
Detachable Jaw
True-rms
Clamp Meter
PN 3622684
August 2010
© 2010 Fluke Co
change without notice. All product names are trademarks of their respective companies.
rporation. All rights reserved. Printed in China. Specifications are subject to
LIMITED WARRANTY AND LIMITATION OF LIABILITY
This Fluke product will be free from defects in material and workmanship for three years from the
date of purchase. This warranty does not cover fuses, disposable batteries, or damage from
accident, neglect, misuse, alteration, contamination, or abnormal conditions of operation or
handling. Resellers are not authorized to extend any other warranty on Fluke’s behalf. To obtain
service during the warranty period, contact your nearest Fluke authorized service center to obtain
return authorization information, then send the product to that Service Center with a description of
the problem.
THIS WARRANTY IS YOUR ONLY REMEDY. NO OTHER WARRANTIES, SUCH AS FITNESS
FOR A PARTICULAR PURPOSE, ARE EXPRESSED OR IMPLIED. FLUKE IS NOT LIABLE
FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LOSSES,
ARISING FROM ANY CAUSE OR THEORY. Since some states or countries do not allow the
exclusion or limitation of an implied warranty or of incidental or consequential damages, this
limitation of liability may not apply to you
Fluke Corporation
P.O. Box 9090
Everett, WA 98206-9090
U.S.A.
11/99
.
Fluke Europe B.V.
P.O. Box 1186
5602 BD Eindhoven
The Netherlands
Table of Contents
Title Page
Introduction................................................................................................................. 1
Contact Fluke ............................................................................................................. 2
Safety Information ...................................................................................................... 2
The Meter ................................................................................................................... 7
Specifications ............................................................................................................. 14
Electrical Specifications.......................................................................................... 14
Mechanical Specifications ...................................................................................... 15
Environmental Specifications ................................................................................. 16
i
365
Users Manual
ii
Introduction
Warning
Read "Safety Information" before you use the Meter.
The Fluke 365 is a true-rms hand-held, battery-operated clamp meter (the Meter) that features a
detachable Jaw. The Meter measures:
• ac and dc current
• ac and dc voltage
• resistance
• continuity
The Meter ships with:
• TL75 or TL175 test leads
• carrying case
• two AA batteries (installed)
• magnetic hanger
• 365 User Manual
1
365
Users Manual
Contact Fluke
To contact Fluke, call one of the following telephone numbers:
• Technical Support USA: 1-800-44-FLUKE (1-800-443-5853)
• Calibration/Repair USA: 1-888-99-FLUKE (1-888-993-5853)
• Canada: 1-800-36-FLUKE (1-800-363-5853)
• Europe: +31 402-675-200
• Japan: +81-3-3434-0181
• Singapore: +65-738-5655
• China: +86-400-810-3435
• Anywhere in the world: +1-425-446-5500
Or, visit Fluke's website at www.fluke.com
To register your product, visit http://register.fluke.com
To see, print, or download the latest manual supplement, visit
http://us.fluke.com/usen/support/manuals
.
.
.
Safety Information
A Warning identifies conditions and actions that pose hazard(s) to the user. A Caution identifies
conditions and procedures that could cause Meter damage, equipment under test damage, or
permanent loss of data.
Symbols used on the Meter and in this manual are explained in Table 1.
2
Detachable Jaw True-rms Clamp Meter
Safety Information
Warning
To prevent possible electrical shock or personal injury, follow these guidelines:
• Use the Meter only as specified in this manual or the protection provided by the
Meter can be compromised.
• Examine the case before you use the Meter. Look for cracks or missing plastic.
Carefully look at the insulation around the connectors.
• Never measure current while the test leads are inserted into the input jacks.
• Make sure the battery door is closed and latched before operating the Meter.
• Remove the test leads from the Meter before the battery door is opened.
• Examine the test leads for damaged insulation or exposed metal. Check test lead
continuity. Replace damaged test leads before using the Meter.
• Do not use the Meter if it operates incorrectly. Protection can be compromised.
When in doubt, have the Meter serviced.
• Do not use the Meter around explosive gas, vapor or in damp or wet
environments.
• Use only type AA batteries, properly installed in the Meter case, to power the
Meter.
• When measuring, keep fingers behind the Tactile Barrier. See "The Meter" .
• To avoid false readings that can lead to electrical shock and injury, replace the
batteries as soon as the low battery indicator () appears.
• When servicing the Meter, use only specified replacement parts.
3
Loading...