Fluke 360 AC Data Sheet

Fluke 360

AC Leakage Current Clamp Meter

The Fluke 360, a rugged and accurate
solution for leakage current measurement

Ideally designed for non-invasive checks of insulation
condition, the Fluke 360 allows you to perform tests without
powering down the installation or disconnecting equipment ­saving you time, without compromising on quality or safety.
The unique jaw design of the Fluke 360 eliminates the
influence of adjacent current conductors, and minimizes the
effects of external magnetic fields, even at low currents.
This allows you to perform accurate and reliable tests in
today’s crowded electrical environments. The tough and
high-quality clamp design of the Fluke 360 guarantees high
stability for long-term repeatability.

Technical Data

• Measurement of leakage current with 3 mA range and 1 µA of

resolution, for accurate monitoring of insulation erosion

• Broad range of measurement, from 1 µA up to 60 A, for all installation

needs

• Advanced shielding to ensure accurate results when measuring near

other conductors

• The high durability clamp construction can withstand over 50,000

operations - added ruggedness that extends the life of your clamp.

• Easy-to-carry, pocket-sized clamp with wide 40 mm (1.5 in) jaw size

• Handy “Display-Hold” button for capturing readings in hard-

to-reach places

• Auto power-off, with warning buzzer, saves battery life

• Conformance to IEC1010 and EMC standard for confident

measurements

• Meets all of the applications and performance classes in safety

standard VDE0404-4 and VDE0702 for leakage current and differential
current measurement of electrical appliances

Special Features

IEC 61010 and EMC Conformance

IEC 61010 safety features including a tactile barrier and
special jaw design provide the user with confidence
when making measurements in hazardous voltage areas.

High Accuracy

Advanced jaw design means that the Fluke 360 accuracy
is little affected by external magnetic fields even at low

currents. Typical external current rejection is 200,000:1.
Conformance to EMC standards ensures high reliability
through reduced susceptibility to electromagnetic interference.
The Fluke 360 also meets the latest safety standard
VDE0404-4 and the new VDE0702 requirements.

General Specification

Method of detection Mean value
Display Digital display: 3200 counts

Bar-graph display: 32 segments, LCD

Measurement cycle 2 times/second (Digital display), 12 times/second (Bar-graph display)
Range switching Auto-range
Ambient temperature and humidity 0 °C to 50 °C, 80 % R

Temperature coefficient 0.05 % of range/°C or less (within the ranges of 0 °C to 18 °C and

28 °C to 50 °C for measurement of 0-50 A)

Influence of external magnetic field 0.0005 % typical 1 (on current value of adjacent cable)
Influence of conductor position Within accuracy

Circuit voltage
Safety standard EN 61010-1, EN 61010-2-032. 300 V CAT II, Pollution Degree 2
Withstanding voltage 3.7 kV ac for one minute
Battery type 1 x 3 V Lithium battery (button cell) CR2032
Battery life Approx. 90 hours (when continuously used)
Auto power-off Approx. 10 minutes
Diameter of measurable conductor 40 mm max.
Weight 200 g (0.441 lb)
Dimension 176 mm x 70 mm x 25 mm (6.9 in x 2.8 in x 1 in)
Operating altitude 2000 m (6,562 ft)

≤ 300 Vrms

or less (no condensation)

H

Electrical Specification

Specifications at 23 ± 5 °C. 80 % R

max

H

Accuracy: ± (% rdg + dgt) = ± (% readout + value of least significant digit)

AC Current Measurement

Measuring range Resolution Accuracy Max Permissible current

3 mA 0.001 mA

30 mA 0.01 mA

30 A 0.01 A
60 A 0.1 A

Mean value detection and rms-value calibration.
Accuracy specified at 50/60 Hz
Frequency range 15 Hz to 150 Hz

2 Fluke Corporation Fluke 360 AC Leakage Current Clamp Meter

1 % + 5

1 % + 5 (0~50 A)

5 % + 5 (50~60 A)

60 A rms

Fluke. The Most Trusted Tools
in the World.

Fluke Corporation
PO Box 9090, Everett, WA USA 98206

Fluke Europe B.V.
PO Box 1186, 5602 BD
Eindhoven, The Netherlands

For more information call:
In the U.S.A. [phone] or
Fax [phone]
In Europe/M-East/Africa [phone] or
Fax [phone]
In Canada (800)-36-FLUKE or
Fax [phone]
From other countries [phone] or
Fax [phone]
Web access: http://www.fluke.com

©2012, 2006 Fluke Corporation. All rights reserved.
Specifications subject to change without notice.
Printed in U.S.A. 10/2012 2791021 D-EN-N Rev B