Fluke 3502 FC Instruction Manual
3561 FC/3502 FC
Vibration Sensor/Gateway
Getting Started Manual
PN 5020149
July 2018
©2018 Fluke Corporation. All rights reserved. Specifications are subject to change without
notice. All product names are trademarks of their respective companies.
Fluke-Direct.com
1.888.610.7664 info@Fluke-Direct.com
LIMITED WARRANTY AND LIMITATION OF LIABILITY
This Fluke product will be free from defects in material and workmanship for two
years from the date of purchase. This warranty does not cover fuses,
disposable batteries, or damage from accident, neglect, misuse, alteration,
contamination, or abnormal conditions of operation or handling. Resellers are
not authorized to extend any other warranty on Fluke’s behalf. To obtain
service during the warranty period, contact your nearest Fluke authorized
service center to obtain return authorization information, then send the product
to that Service Center with a description of the problem.
THIS WARRANTY IS YOUR ONLY REMEDY. NO OTHER WARRANTIES,
SUCH AS FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSED OR
IMPLIED. FLUKE IS NOT LIABLE FOR ANY SPECIAL, INDIRECT,
INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LOSSES, ARISING
FROM ANY CAUSE OR THEORY. Since some states or countries do not
allow the exclusion or limitation of an implied warranty or of incidental or
consequential damages, this limitation of liability may not apply to you.
11/99
Fluke-Direct.com
1.888.610.7664 info@Fluke-Direct.com
Contents
Introduction ................................................................................................... 3
Before you install .......................................................................................... 4
Step 1: Watch the setup video ............................................................. 4
Step 2: Choose the connectivity option ................................................ 4
Step 3: Setup the network .................................................................... 5
Step 4: Determine asset information .................................................... 6
Step 5: Record the asset information ................................................. 10
In-app Setup ............................................................................................... 11
Step 6: Download and install Fluke Connect ..................................... 11
Step 7: Complete the in-app setup .....................................................12
Sensor Installation ...................................................................................... 14
Step 8: Select the Sensor location ..................................................... 14
Step 9: Confirm the Sensor and Gateway connection ....................... 15
Step 10: Mount the Sensors ............................................................... 16
Step 11: Monitor assets remotely ....................................................... 16
Specifications . ............................................................................................ 17
Fluke-Direct.com
1.888.610.7664 info@Fluke-Direct.com
3561 FC/3502 FC
Getting Started Manual
A Warning identifies conditions and procedures that are dangerous to the user.
Symbols used on the Product and in this manual are explained in Table 1.
XWWarning
To prevent possible electrical shock, fire, or personal injury and for
safe operation of the Product:
• Read all safety information before you use the Product.
• Use the Product only as specified, or the protection supplied by
the product can be compromised.
• Do not use the Product if it operates incorrectly.
• Carefully read all instructions.
• Use this Product indoors only.
• Have an approved technician repair the Product
• Disable the Product if it is damaged.
• Do not use in wet location (Gateway only)
Tab le 1 . S ym bols
Symbol Explanation
W
P
T
~
2
Consult User Documentation.
WARNING. RISK OF DANGER.
Conforms to European Union directives.
Conforms to relevant Australian Safety and EMC standards.
Certified by Underwriters Laboratories to North American safety standards.
Indoor use only. (Gateway)
Double Insulated (Gateway)
This product complies with the WEEE Directive marking requirements. The
affixed label indicates that you must not discard this electrical/electronic
product in domestic household waste. Product Category: With reference to
the equipment types in the WEEE Directive Annex I, this product is classed
as category 9 “Monitoring and Control Instrumentation” product. Do not
dispose of this product as unsorted municipal waste.
Fluke-Direct.com
1.888.610.7664 info@Fluke-Direct.com
Introduction
The Product comprises a Fluke 3561 FC Vibration Sensor (the Sensor) and
3502 FC Gateway (the Gateway). Use the Product to monitor vibration trends
remotely through the Fluke Connect
Unpack the Product
Carefully unpack all items from the box. See Table 2.
Table 2: Inside the box
1
2
Item Description Starter/Expansion kits
Not pictured Software subscription enabled for Sensors (1 year / 3 year)
3502 FC Gateway (In Starter Kit only)
Getting Started Manual
3561 FC Vibration Sensors (4)
Epoxy (2)
Epoxy application instructions
Description Gateway
3502 FC Gateway
Getting Started Manual
VIBRATION SENSOR
®
3561 FC
app.
3
VIBRATION SENSOR
XXXXX
3561 FC
VIBRATION SENSOR
XXXXX
3561 FC
VIBRATION SENSOR
XXXXX
4
3561 FC
5
XXXXX
3
Fluke-Direct.com
1.888.610.7664 info@Fluke-Direct.com
3561 FC/3502 FC
Getting Started Manual
Before you install
Important: For a successful setup, follow the sequence in these
instructions.
Step 1: Watch the setup video
To see the system setup and installation, watch the video
From the Quick Start page, select 3561 FC Vibration Sensor.
Step 2: Choose the connectivity option
Option 1: WiFi connectivity must be available (2.4 GHz) at the installation
location.
OR
Option 2: Use mobile router/hotspot for connectivity. For example: Verizon
Jetpack MiFi, Cradlepoint.
4
Fluke-Direct.com
1.888.610.7664 info@Fluke-Direct.com
Loading...