Fluke 1AC-II, 1LAC-II Specifications
1AC-II/1LAC-II VoltAlert
The pocket-sized voltage detector
The next generation VoltAlert™ ac voltage testers from
Fluke are easy to use—just touch the tip to a terminal strip,
outlet, or cord. When the tip glows red and the unit beeps,
you know there’s voltage in the line. Electricians, maintenance, service, safety personnel, and homeowners can
quickly test for energized circuits and defective grounds on
the factory floor, in the shop, or at home.
The 1AC-II continually tests its battery and its circuit integrity
•
with a periodic double flash visual indication using Fluke
Voltbeat™ technology.
The VoltAlert™ Tester (1AC-II and 1LAC-II) is a Category IV —1000 V
•
overvoltage rated product for added user protection, the highest
rated of its kind.
Voltage detection of 90 V to 1000 V ac or 200 V to 1000 V ac
•
depending on model, as well as a 24 V to 1000 V ac control
circuit model.
It is rugged, reliable, and has a two-year warranty.
•
Technical Data
Specifications
Operating principle
Senses the steady state electrostatic field produced by ac
voltage through insulation
without requiring contact to the
bare conductor. A red glow at
the tip and a beeping noise (if
not switched OFF) indicates the
presence of voltage.
Note: Does not respond to random
electrostatic discharge.
Voltage sensing ranges
Nominally, 90 V AC to 1000 V
AC or 200 V AC to 1000 V AC
depending on model, 45 Hz to
405 Hz; also a 20 V to 90 V
control circuit model
Detector tip style
Blade or round, depending
on model
Light source
One high intensity red LED
Agency approvals/listings
c CSA us, CE, C-Tick
Safety rating
1000 V, CAT IV
IP rating
IP 40
Operating temperature
range
-10 °C to 50 °C
Operating humidity ranges
0 % to 95 % (0 °C to 30 °C)
0 % to 75 % (30 °C to 40 °C)
0 % to 45 % (40 °C to 55 °C)
Operating altitude
3000 meters
Batteries
2 AAA alkaline batteries
included
®
USC
Related standards
and regulations for:
Safety
Europe and ROW: Low voltage
directive and related standards as: EN61010 respectively
IEC61010 for international
requirements
EMC
Europe and ROW: EMC directive and related standards as:
EN61326 respectively IEC61326
and their subset for ESD. Not
all EMC standards are necessary due to no contact to mains
voltage.
Environmental
Especially in European markets
with relations to WEEE and
RoHs directive for the used materials and information in the
user documetation (manual)
Ordering Information
Fluke-1AC-A1-II ACV Detector 90-1000V, ENGL/LASPN/CFR
Part Number 2432932
Fluke-1AC-A2-II ACV Detector 90-1000V, BRPORT/JAP/CHIN-T
Part # 2432944
Fluke-1AC-E1-II ACV Detector 200-1000V, ENGL/GER/FREN/DUTCH
Part # 2432967
Fluke-1AC-E2-II ACV Detector 200-1000V, DANSH/NORW/SWED
Part # 2432971
Fluke-1AC-P1-II ACV Detector 200-1000V, KOR/THAI/SPANISH
Part #2433000
Fluke-1LAC-A-II Low Voltage Detector 20-90 VAC AMERICAS PACIFIC
Part # 2433021
FLK-1AC-A1-II-5PK Volt Alert, 5 Pack For USA
Part # 2433042
FLK-1AC-E1-II-5PK Volt Alert, 5 Pack For EUROPE
Part # 2433056
Americas version European version Low volt version
Fluke. Keeping your world
up and running.
Fluke Corporation
PO Box 9090, Everett, WA 98206 U.S.A.
Fluke Europe B.V.
PO Box 1186, 5602 BD
Eindhoven, The Netherlands
Modification of this document is not
permitted without written permission
from Fluke Corporation.
For more information call:
In the U.S.A. (800) 443-5853 or
®
Fax (425) 446-5116
In Europe/M-East/Africa +31 (0) 40 2675 200 or
Fax +31 (0) 40 2675 222
In Canada (800)-36-FLUKE or
Fax (905) 890-6866
From other countries +1 (425) 446-5500 or
Fax +1 (425) 446-5116
Web access: http://www.fluke.com
©2005-2009 Fluke Corporation.
Specifications subject to change without notice.
Printed in U.S.A. 8/2009 2513868B D-US-N
Loading...