Fluke 1587, 1587 FC, 1577 Data sheet

Page 1

TECHNICAL DATA

Fluke 1587 FC/1577 Insulation Multimeters

The High-Performance 2-in-1 Insulation DMM

The Fluke 1587 FC and 1577 Insulation Multimeters combine a digital insulation tester with a full-featured, true-rms digital multimeter in a single compact, handheld unit, which provides maximum versatility for both troubleshooting and preventative maintenance.

The Fluke 1587 FC Insulation Multimeter adds four powerful new diagnostic functions through the Fluke Connect® Measurements app:

• PI/DAR timed ratio tests with TrendIt

and contaminated insulation problems faster

• Memory storage through Fluke Connect eliminates writing down

results, reduces errors and saves data for historical tracking over time

• Temperature Compensation through app for establishing accu-

rate baselines and relevant historical comparisons

• Historical tracking and trending of assets identifies degradation

over time, allows real-time decisions to be made in the field with Fluke Connect® Assets (sold separately)

™

graphs identifies moisture

FLUKE CONNECT COMPATIBLE (1587 FC ONLY)

Download the free Fluke Connect® app from iTunes or Google Play to enable graphs within the Pi/DAR function, memory storage, and temperature compensation

DISPLAY

Large, 6000-count back-lit display

VFD

Low-pass filter for accurate motor drive measurements (1587 FC only)

INSULATION TEST

1587 FC: 0.01 MΩ to 2 GΩ 1577: 0.1 MΩ to 600 MΩ

INSULATION TEST VOLTAGES

1587 FC: 50 V, 100 V, 250 V, 500 V, 1000 V 1577: 500 V, 1000 V

WARRANTY

Three-year standard warranty; extendable to five-years through product registration within 45 days of purchase*

Store and share data using the Fluke 1587 FC with Fluke Connect Measurements App.

* Two-year add ition al warrant y offer m ay be discontinued w ithout notice

Page 2

Product Highlights

• PI/DAR timed ratio tests (1587 FC only)

• Live circuit detection prevents insulation test if voltage > 30 V is

detected for added user protection

• VFD low-pass filter for accurate motor drive measurements

(1587FC only)

• Auto-discharge of capacitive voltage for added user protection

• Insulation test (1587 FC: 0.01 MΩ to 2 GΩ) (1577: 0.1 MΩ to

600MΩ)

• Insulation test voltages (1587 FC: 50 V, 100 V, 250 V, 500 V,

1000 V),(1577: 500 V, 1000 V) for many applications

• AC/DC voltage, DC millivolts, AC/DC milliamps, Resistance (Ω),

Continuity

• Capacitance, diode test, temperature, Min/Max, frequency (Hz)

(1587 FC only)

• Auto power off to save battery power

• CAT III 1000 V, CAT IV 600 V measurement category

• Large display with backlight

• Rugged, utility hard case allows you to bring everything you

need for the job

• Included accessories: Remote probe, test leads and probes,

alligator clips, (K-type thermocouple, 1587 FC only)

• Accepts optional Fluke TPAK Magnetic Meter Hanger for

convenient hands free operation

• Three-year standard warranty; extendable to five-years through

product registration within 45 days of purchase*

General Specifications

Maximum voltage applied to any terminal and common

Storage temperature -40 °C to 60 °C (-40 °F to 140 °F)

Operating temperature -20 °C to 55 °C (-4 °F to 131 °F)

Temperature coefficient 0.05 x (specified accuracy) per °C for temperatures <18 °C or >28 °C (<64 °F or >82 °F)

Relative humidity Noncondensing

Vibration Random, 2 g, 5-500 Hz per MIL-PRF-28800F, Class 2 instrument

Radio frequency communication 2.4 GHz ISM Band

Radio frequency certification FCC: T68-FBLE, IC: 6627A-FBLE

Electromagnetic compatibility

International IEC 61326-1: Portable Electromagnetic Environment; IEC 61326-2-2 CISPR 11: Group 1, Class A

1000 V

0 % to 95 % @ 10 °C to 30 °C (50 °F to 86 °F)

0 % to 75 % @ 30 °C to 40 °C (86 °F to 104 °F)

0 % to 40 % @ 40 °C to 55 °C (104 °F to 131 °F)

Group 1: Equipment has intentionally generated and/or uses conductively-coupled radio frequency energy that is necessary for the internal function of the equipment itself.

Class A: Equipment is suitable for use in all establishments other than domestic and those directly connected to a low-voltage power supply network that supplies buildings used for domestic purposes. There may be potential difficulties in ensuring electromagnetic compatibility in other environments due to conducted and radiated disturbances.

Emissions that exceed the levels required by CISPR 11 can occur when the equipment is connected to a test object. The equipment may not meet the immunity requirements of this standard when test leads and/or test probes are connected.

2 Fluke Corporation 1587 FC/1577 Insulation Multimeters

Page 3

General specifications cont.

Korea (KCC) Class A Equipment (Industrial Broadcasting & Communication Equipment)

Class A: Equipment meets requirements for industrial electromagnetic wave equipment and the seller or user should take notice of it. This equipment is intended for use in business environments and not to be used in homes.

USA (FCC) 47 CFR 15 subpart B. This product is considered an exempt device per clause 15.103.

Enclosure protection IEC 60529: IP40 (non-operating)

Safety IEC 61010-1 Pollution Degree 2

IEC 61010-2- 0 33 CAT IV 600 V/CAT III 1000 V

Batteries Four AA batteries (NEDA 15A or IEC LR6)

Battery life Meter use 1000 hours; Insulation test use: Meter can perform at least 1000 insulation

tests with fresh alkaline batteries at room temperature. These are standard tests of 1000 V into 1 MΩ with a duty cycle of 5 seconds on and 25 seconds off.

Size 5.0 cm H x 10.0 cm W x 20.3 cm L (1.97 in H x 3.94 in W x 8.00 in L)

Weight 550 g (1.2 lb)

Altitude Operating 2000 m

Storage 12,000 m

Over-Range capability 110 % of range except for capacitance which is 100 %

Frequency overload protection <107 V-Hz

Fuse Protection for mA input 0.44A, 1000 V, IR 10 kA

Electrical specifications

AC voltage measurement

Accuracy (1587 FC only)

Range Resolution 50 Hz to 60 Hz

± (% of Rdg + counts)

60 0.0 mV 0.1 mV ± (1 % + 3) ± (2 % + 3)

6.000 V 0.001 V ± (1 % + 3) ± (2 % + 3)

60.00 V 0.01 V ± (1 % + 3) ± (2 % + 3)

600.0 V 0.1 V ± (1 % + 3) ± (2 % + 3)

1000 V 1 V ± (2 % + 3) ± (2 % + 3)

1 kHz bandwidth

Low-Pass Filter Voltage (1587 FC only)

Range Resolution 50 Hz to 60 Hz

± (% of Rdg + Counts)

60 0.0 mV 0.1 mV ± (1 % + 3) + (2 % + 3) - (6 % - 3)

6.000 V 0.001 V ± (1 % + 3) + (2 % + 3) - (6 % - 3)

60.00 V 0.01 V ± (1 % + 3) + (2 % + 3) - (6 % - 3)

600.0 V 0.1 V ± (1 % + 3) + (2 % + 3) - (6 % - 3)

1000 V 1 V ± (2 % + 3) + (2 % + 3) - (6 % - 3)

60 Hz to 5000 Hz ± (% of Rdg + counts)

60 Hz to 400 Hz ± (% of Rdg + Counts)

3 Fluke Corporation 1587 FC/1577 Insulation Multimeters

Page 4

1577 accuracy

Range Resolution 50 Hz to 60 Hz

± (% of Rdg + Counts)

600.0 mV 0.1 mV ± (2 % + 3)

6.000 V 0.001 V ± (2 % + 3)

60.00 V 0.01 V ± (2 % + 3)

600.0 V 0.1 V ± (2 % + 3)

1000 V 1 V ± (2 % + 3)

AC Conversion Inputs are ac coupled true-rms responding and specified from 5 % to 100 % of range. Input

signal crest factor can be up to 3 up to 500 V, decreasing linearly to a crest factor ≤1.5 at 1000 V. For non-sinusoidal waveforms add ± (2 % reading + 2 % FS) typical, for a crest factor up to 3.

Input Impedance 10 MΩ (nominal), <100 pF, ac-coupled

Common mode rejection ratio

>60 dB at dc, 50 or 60 Hz

(1 kΩ unbalanced)

DC voltage measurement

Range Resolution Accuracy 1587 FC

± (% of Rdg + Counts)

Accuracy 1577

± (% of Rdg + Counts)

6.000 V dc 0.001 V ± (0.09 % + 2) ± (0.2 % + 2)

60.00 V dc 0.01 V ± (0.09 % + 2) ± (0.2 % + 2)

600.0 V dc 0.1 V ± (0.09 % + 2) ± (0.2 % + 2)

1000 V dc 1 V ± (0.09 % + 2) ± (0.2 % + 2)

Accu racies apply to ± 100% of range.

Input Impedance: 10 MΩ (nominal), <100 pF Normal mode rejection ratio: >60 dB @ 50 Hz or 60 Hz Common mode rejection ratio: >120 dB @ dc, 50 Hz or 60 Hz (1 k unbalanced)

DC millivolts measurement

Range Resolution Accuracy 1587 FC

± (% of Rdg + Counts)

Accuracy 1577

± (% of Rdg + Counts)

600.0 mV dc 0.1 mV ± (0.1 % + 1) ± (0.2 % + 1)

DC and AC current measurement

Range Resolution Accuracy 1587 FC

± (% of Rdg+Counts)

AC 45Hz to 1000Hz

400 mA 0.1 mA ± (1.5 % + 2)

60 mA 0.01 mA ± (1.5 % + 2)

Accuracy 1577

± (% of Rdg+Counts)

± (2 % + 2)

Burden voltage

(Typical)

2 mV/mA

DC 400 mA 0.1 m A ± (0.2 % + 2) ± (1.0 % + 2) 2 mV/m A

60 mA 0.01 m A ± (0.2 % + 2) ± (1.0 % + 2)

1 kHz bandwidth

Overload: 600 mA for 2 minutes maximum Fuse protection for mA Input: 0.44 mA, 1000 V, IR 10 kA AC conversion: Inputs are ac coupled true-rms responding and specified from 5 % to 100 % of range. Input signal crest factor can be up to 3 up to 300 mA, decreasing linearly to crest factor ≤1.5 at 600 mA. For non-sinusoidal waveforms add +(2 % reading + 2 % FS) typical, for a crest factor up to 3.

4 Fluke Corporation 1587 FC/1577 Insulation Multimeters

Page 5

Ohms measurement

Range Resolution Accuracy 1587 FC1

+ (% of Rdg+Counts)

Accuracy 15771

+ (% of Rdg+Counts)

600.0 Ω 0.1 Ω

6.000 kΩ 0.0 01 kΩ

60.00 kΩ 0.01 k Ω

± (0.9 % + 2) ± (1.2 % + 2)

600.0 kΩ 0.1 K Ω

6.000 MΩ 0.001 M Ω

50.0 MΩ [2] 0.01 M Ω ± (1.5 % + 3) ± (2.0 % + 3)

Accu racies apply fr om 0 % to 100 % of range. 2Up to 80 % rel ative hu midity.

Overload protection: 1000 V rms or dc Open circuit test voltage: <8.0 V dc Short circuit current: <1.1 mA

Diode test (1587 FC only)

Diode test indication Display voltage drop: 0.6 V at 1.0 mA nominal test current:

Accuracy ± (2 % + 3)

Continuity test

Continuity indication Continuous audible tone for test resistance below 25 Ω and off above 100 Ω.

Maximum reading; 1000 Ω

Open circuit voltage <8.0 V

Short circuit current 1.0 mA typical

Overload protection 1000 V rms

Response time >1 m sec

Frequency measurement (1587 FC only)

Range Resolution Accuracy ± (% of Rdg+Counts)

99.99 Hz 0.01 Hz ± (0.1 % + 1)

999.9 Hz 0.1 Hz ± (0.1 % + 1)

9.999 kHz 0.001 kHz ± (0.1 % + 1)

99.99kHz 0.01 kHz ± (0.1 % + 1)

Frequency counter sensitivity

Input range V ac Sensitivity (RMS Sine Wave)

DC trigger levels to 20 kHz

5 Hz to 20 kHz 20 kHz to 100 kHz

600.0 mV ac 100.0 mV 150.0 mV NA

6.0 V 1.0 V 1.5 V -400.0 mV and 2.5 V

60.0 V 10.0 V 36.0 V 1.2 V and 4.0 V

600.0 V 100.0 V 12.0 V and 40.0 V

1000.0 V 300.0 V 12.0 V and 40.0 V

Maximum i nput for sp ecif ied accuracy = 10x range (1000 V max). Noise at low freq uencie s and amplitudes may af fect accuracy.

Usable to 100 kHz with f ull scale input.

Capacitance (1587 FC only)

Range Resolution Accuracy ± (% of Rdg+Counts)

1000 nF 1 nF

10.00 μF 0.01 μ F

100.0 μF 0.1 μ F

9999 μF 1 μF

± (1.2 % + 2)

± (1.2 % + 90 counts)

Temperature measurement (1587 FC only)

Range Resolution Accuracy1 ± (% of Rdg+Counts)

-40 ° C to 537 ° C 0.1 °C ± (1 % + 10 counts)

-40 ° F to 998 ° F 0.1 °F ± (1 % + 18 counts)

Accu racies apply fol lowi ng 90 mi nutes settli ng time after a change in the a mbient temperat ure of t he instru ment.

5 Fluke Corporation 1587 FC/1577 Insulation Multimeters

Page 6

Insulation specifications

Measurement range Model 1587 FC: 0.01 MΩ to 2 GΩ

Test voltages Model 1587 FC: 50, 100, 250, 500, 1000 V

Test voltage accuracy +20 %, -0 %

Short-Circuit test current 1 mA nominal

Auto discharge Discharge time <0.5 second for C = 1 μF or less

Live circuit detection Inhibit test if terminal voltage > 30 V prior

Maximum capacitive load Operable with up to 1 μF load

Model 1587 FC

Output voltage Display range Resolution Test current Resistance accuracy

50 V (0 % to +20 %)

100 V (0 % to +20 %)

250 V (0 % to +20 %)

500 V (0 % to +20 %)

1000 V (0 % to +20 %)

Mo del 1577

500 V (0 % to +20 %)

1000 V (0 % to +20 %)

0.01 to 6.00 MΩ 0.01 M Ω

6.0 to 50.0 MΩ 0.1 M Ω

0.01 to 6.00 MΩ 0.01 M Ω

60 to 100 MΩ 1 MΩ

0.1 to 60.0 MΩ 0.1 MΩ

60 to 250 MΩ 1 MΩ

0.1 to 60.0 MΩ 0.1 M Ω

60 to 500 MΩ 1 MΩ

0.1 to 60.0 MΩ 0.1 MΩ

60 to 600 MΩ 1 MΩ

0.6 to 2.0 GΩ 100 M Ω ± (10 % + 3 counts)

0.1 to 60.0 MΩ 0.1 M Ω

60 to 500 MΩ 1 MΩ

0.1 to 60.0 MΩ 0.1 M Ω

60 to 600 MΩ 1 MΩ

Model 1577: 0.1 MΩ to 600 MΩ

Model 1577: 500, 1000 V

to initialization of test

± (% of Rdg + Counts)

1 mA @ 50 kΩ ± (3 % + 5 counts)

1 mA @ 100 kΩ ± (3 % + 5 counts)6.0 to 60.0 MΩ 0.1 M Ω

1 mA @ 250 kΩ ± (1.5 % + 5 counts)

1 mA @ 500 kΩ ± (1.5 % + 5 counts)

1 mA @ 1 MΩ

1 mA @ 500 kΩ ± (2.0 % + 5 counts)

1 mA @ 1 MΩ ± (2.0 % + 5 counts)

± (1.5 % + 5 counts)

6 Fluke Corporation 1587 FC/1577 Insulation Multimeters

Page 7

Comparison chart

PI/DAR timed ratio measurements with TrendIt™ graphs through Fluke Connect Measurements app

Memory storage through Fluke Connect Measurements app

Temperature Compensation through Fluke Connect Measurements app

VFD low-pass filter for accurate motor drive measurements

Insulation test voltages 50 V, 100 V, 250 V, 500 V, 1000 V

Insulation test voltages 500 V, 1000 V

Insulation test: 0.01 MΩ to 2.0 GΩ

Insulation test: 0.1 MΩ to 600 MΩ

Auto-discharge of capacitive voltage

Insulation test smoothing reading

Frequency

Capacitance

Diode test

Temperature

Min/Max

AC/DC Voltage

DC Millivolts

AC/DC Milliamps

Resistance (0.1 Ω to 50 MΩ)

Continuity

Three-year warranty

Remote probe, test leads, alligator clips

K-type thermocouple

Rugged, utility hard case

Auto power off

1587 FC 1577

•

• •

•

• •

•

• •

7 Fluke Corporation 1587 FC/1577 Insulation Multimeters

Page 8

Ordering information

Fluke-1577 Insulation Multimeter Fluke-1587 FC Insulation Multimeter Fluke-1587/MDT FC 2-IN-1 ADV Motor & Drive Kit w/9040, i400 1587KIT/62MAX+ FC 2-IN-1 ADV Elec Kit w/62MAX+ i400

Included

Remote probe, test leads, alligator clips, K-type thermocouple (1587 FC only), hard case, user documentation

Optional accessories

TPA K Magnetic Tool Hanger i400 AC Current Clamp C25 Soft Case

See it. Save it. Share it. All the facts, right in the field.

Fluke Connect® with ShareLive™ video call is the only wireless measurement system that lets you stay in contact with your entire team without leaving the field*. The Fluke Connect mobile app is available for iPhone models 4S and up running iOS 8.0 or higher, iPad Air and iPad Mini (2nd generation) in an iPhone frame on iPad and iPod Touch (5th generation) HTC One and One M8 running Android 4.4.x or higher LG G3 and Nexus 5 running Android 4.4.x or higher Samsung Galaxy S4 running Android 4.3.x or higher Samsung Galaxy S5 running Android 4.4.x or higher and works with over 20 different Fluke products—the largest system of connected test tools in the world. And more are on the way. Go

to the Fluke website to find out more.

*Within provider’s wireless service area.

Download the app at:

All t radema rks are the property of their respective owner s. WiF i or cellular serv ice req uir ed to sha re data . Smar tphone, wireless service and data plan not included wit h purchase. F irst 5 GB of storage is free. Phone suppor t details ca n be vie wed at fluke.com/phones.

Smart phone wireless service and data plan not included w ith purchase. Fluke Connect is not available in all countries.

Fluke. Keeping your world up and running.

Fluke Corporation PO Box 9090, Everett, WA 98206 U.S.A.

Fluke Europe B.V. PO Box 1186, 5602 BD Eindhoven, The Netherlands

For more information call: In the U.S.A. (800) 443-5853 or Fax (425) 446-5116 In Europe/M-East/Africa +31 (0) 40 2675 200 or Fax +31 (0) 40 2675 222 In Canada (800)-36-FLUKE or Fax (905) 890-6866 From other countries +1 (425) 446-5500 or Fax +1 (425) 446-5116 Web access: http://www.fluke.com

Modification of this document is not permitted without written permission from Fluke Corporation.

8 Fluke Corporation 1587 FC/1577 Insulation Multimeters