Flir CB-3102-01-I, CB-3102-11-I Installation Guide

Quick Install Guide

Ariel Gen II

CB-3102

Bullet IP Camera

A. What's in the Box

Qty

Description

1

CB-3102 mini-bullet camera

1

Bag containing three screws and three plastic anchors

1

T6 Torx wrench

1

Drill template

1

CB-3102 Quick Installation Guide

B. Accessing Camera Documentation and Utility Software from the Web

C. Insert and Configure the MicroSD Card

1. Unscrew the panel cover on the underside of the camera body.

2. Insert a microSDXC card (up to 128GB, Class 10) in the card drive.

3. Screw the panel cover closed.

D. Install the camera

1. Be sure to have the required accessories and tools
available.

2. Refer to the User Guide as necessary.

3. Using the provided template, mark the drill locations

4. Mount the camera.

5. Check that camera orientation covers the required field of
view.

E. Connect the camera

1. Insert a cable in the RJ45

connector to attach to the
network switch for a 10/100
Mbps Ethernet and POE
connection.
Note:
This camera must be connected
to a PoE source.

2. Connect the Audio-IN and Alarm-

IN connectors

Connectors

White - Audio IN
Grey - GND

Purple - Alarm IN
Yellow - GND

F. Discover the Camera

The camera’s web interface can be
accessed by Internet Explorer 10 and higher (32­bit) with the ActiveX plug-in and by browsers that
do not require ActiveX, such as Microsoft Edge,
Chrome or Firefox, on PCs running 64-bit
Windows 7, 8, 8.1, or 10.

Set the Camera's IP address and Video Format

1. Download and install the DNA Utility from the FLIR website as

shown above

2. Attach the unit to the same LAN segment as the computer that is

managing the unit. DNA automatically discovers the unit on the
network and displays the device’s current IP address in the
Discover List.

3. Select the unit from the Discover List.

4. If using a Static IP address (as on a Latitude System), follow the

DNA instructions to set the desired IP address.

5. On a system using DHCP, select the DHCP option in DNA.

6. To select PAL or NTSC, select the device in the Discover list,

right-click to open the context menu and clicking Change Video

Format.

5. Click Update.

G: Completing Camera Setup

1. 1. For Varifocal models ( CB-3102-11) , use the Web Interface to set Zoom and Focus.
Default Username is Admin, password 1234.

2. For SoE recording use the Web interface to check SD card
status, and format it.
a. Verify that the card status is displayed as Mounted in

the System > Events Handler > SD Card screen.
b. Format the card.
c. Configure the camera to store snapshots and recordings from the

System > Events Source screens.

H. Attach to VMS

Once you have completed installation and setup and found the current IP
address with DNA, use your VMS Discovery/Attach procedures to attach the
camera to your VMS.

CC-3102_QIG_v3

FLIR Systems, Inc.

Tel: [phone]

6769 Hollister Ave.

[e-mail]

Goleta, CA 93117

www.flir.com/security