Fisher & Paykel WL42T26KW1-96174A, WL42T26DW1-96198A, WL42T26DW1-96178B, WL42T26DW1-96178A Owner’s Manual

E_ectri¢ Shock Hazard

Read a_d follow the IMPORTANT SAFETY INSTRUCTIONS outlined in this
User Guide before operatin 9 this appliance, pages 3 - 5o

Failure to do so can result in death, electric shock, fire or injury to persons°

Please Note: To obtain maximum efficiency, your AquaSmart _washer has the ability to learn
and adapt to the local environment, This may take several wash cycles, therefore maximum
energy efficiency may not be achieved until a number of wash cycles have been completed.

This usually takes about 5 cycles.

Espaflo[ 42 - 77

As an ENERGY S_AR_'_Partner Fisher & Payke[ Limited has determined

that this product meets ENERGY STAR_'guidelines for energy efficiency.

_mportant safety instructions
_nstaHation instructions

Before you do your first wash

Checklist, Water consumption, Capac ty

The first time you turn your washer on
Getting started quickly

D spens ng model
Nomdispens ng model

The unique AquaSmart T'_wash

Sorting and bading

Fabric Softener
Bleach

AquaSmart TM safety features
Choosing your wash cycle
Changing the wash cycle options
Customizing the wash cycles

Changing preoset options

Controlled cold
AquaPlus rinse/End of cycle beeps

Oubof--baiance recovery rout ne/Reset back to factory sett ngs

Caring for your AquaSmart _'_washer

Before you call for service

If you_"AquoSmc:_rt'''_beeps for hep
Solving operat ng prob eros

Solving wash prob eros

Limited warranty

How to get serv ce

3
6

12
12

13
14

14
16

18
19

21
22
23
24
25
26

27
28

28
29

30
31

33
33

35
37

38
4O

SAVE THESEINSTRUCT!ONS

7hemodal shovvr_in his Ilser(}uidc mc_ynot _,_ec_vdJi/c_,_/ein c_//mc_rket_c_ndc_r_
5ubj_,ctro<hc_ng_c_tc_nytim_.fbr currentd_t:_i/ obout modaldmd pedi_cc_tion
d_vdJild_bi/£yinyour country,p/,_dd_visitourIoco/ webs£eIi£edon thebook c.over
or contc_ctyour/#co/fisher &Pc_ykdc/_,d_/e_

Welcome to AquaSmart T'v'

Thank you for buying a Fisher & Paykel AquaSm_rt _clothes washer. We are very proud of this
washer and trust it will serve you well for many years,

At Fisher & Paykel we aim to provide innovative products that are simple to use, ergonomic and
kind to the environment. Thousands of tonnes of washing and 70 years of laundry experience
have been programmed into your clothes washer to help give you the best possible performance.

"..!ourAqu_Sm_rt _ clothes washer works differently from a conventional washer. It is a"High

Efficiency" washer utilizing innovative technology to wash in less water and take great care of

your clothes.

The revolutionary, super water efficient wash action of your AquaSm_rt _ washer means that it

is no longer necessary to wash using a full bowl of water, This innovative wash action relies on
maintaining a small volume of water for the wash load to ensure the best wash results, Please be

aware that the water level for this model is fully automatic, with the machine 'smarts' choosing
the appropriate water volume for you. This means that there is no option to select your

water level,

It is important that you take the time to read these instructions carefully before you begin using
your washer. Like all High Efficiency washers, a little extra care in how you sort your clothes and
choose your cycle and detergent will ensure that you get the best possible wash result.

We hope you enjoy your new washer, we have certainly enjoyed designing it for you.

D spensing model Non--d spensing modal

mportant Safety structions

Read all safety information before using

Many washers are located near a gasdryer or a water heater in the home.

Fire Hazard

For your safety the information in this manua_ must be followed to
minimize the risk of fire or explosion or to prevent property damage,
persona_ injury or _ossof lifeo

Do not store or use gasoline or other flammaMe vapors and Hquids in the
vicinity of this or any other app_ianceo

_nstaHation and service must be performed by a qualified installer, service
agency or the gas supp_iero

What to do if you smell gas

DO NOT try to light any appliance.
DO NOT touch an electrical switch; do not use any phone in your building.
Clear the room, building or area of all occupants.

o Immediately call your gas supplier from your neighbor's phone.

Follow the gas supplier's instructions.
If you cannot reach your gas supplier, call the fire department

Water heater safety

Under certain conditions Hydrogen gas may be produced in awater heater that hasnot been
usedfor two weeks or more.

MYDROGEN GAS CAN BE EXPLOSIVE UNDER THESE CIRCUMSTANCES,

If the hot water has not been used for two weeks or more, prevent the possibility of damage or
injury by turning on all hot water faucets and allowing them to run for several minutes before
using any electrical appliance which is connected to the hot water system. This will allow any
hydrogen gas to escape. Since the gas is flammable, do not smoke or use an open flame or

appliance during this process.

mpo tant Safety structions

E_ectric Shock Nazard

Follow the safety precautions outlined in this User Guide.
Failure to do so can result in death, e_ectric shock,fire or injury to persons,

Read all instructions before using the appliance,
Use this appliance only for its intended puroose as described in this User Guide.
_is washer must be properly installed and located in accordance with the Installation Instructions

before it is used,
This washer must be properly grounded to conform with aff govembg codes and odinances, Foffow

details in the Installation Instructions.
Do not install or store washer where it wiff be exposed to temperatures below freezing or exposed to

the weather.

C_nnect t_ a pr_pedy mted_ pmtected and sized p_wer supply circuit t_ av_id dectrica_ _vedoad,
Connect to adequate plumbing and drain facilities as described in the Installation Instructions.
_Jrn off water faucets when the washer is not in use to relieve pressure on hoses and valves and to
minimize leakages ira hose or valve should break or rupture.

Do not repair or replace any part of the appliance or attempt any servicbg unbss specifically
recommended in this User Guide or in published user repair instructions that you understand, and
have skiffs to carry out,

When disc_nnecting the app_iance pu_ bythe p_ug mtherthan the c_rd _r juncti_n _f c_d t_ avo_d
damage to the cord or junction of the cord and plug,
MaM sure that the cord is located so that it will not be stepped on, tripped over or otherwise subject
to damage or stress,
Keep aff laundry aids (such as detergents, bleach, fabric softene# etc.) out of the reach of children,
preferably in a locked cabinet, Observe all warnbgs on contaber labels to avoid personal injury.
Do not tamper with the controls,
Keep the area around/underneath your appliance free #ore the accumulation of combustible
materials, such as tint, pape,_,rags, chemicals, etc.
Keep the floor around your appfiance clean and dnv to reduce the possibility of dipping,

o Never reach into the washer if the tub or agitator is moving.
o Beforeloadbg, unloadingoraddingclothes, pressSTART/PAUSEandwaituntffthewasherhas

completely stopped before opening the lid,
dose supervision is necessary if this appliance isused by or near children, Do not allow children to
play inside or on, or with this appliance or any discarded appliance,

mportant Safety nstructions

Disposeof discarded appliancesand shipping/packing materials properly. BeMmdiscarding a
washer,or removing from service remove the washer rid.

Do not leavethe washerrid upduring the cycle.Thewasherwifl not function. Tostart, closerid and
pressSTART/PAUSE
Do not wash or dry articbs that have beencleanedin,washedin, soaMd in, or spotted with
combustibleor explosivesubstancesGuchaswax,oil, pabt, gasolb¢ degreasers,dry<:baning

solvents,kerosene,etc.)which may ignite or exidode.Do not add thesesubstancesto the wash
wate,_Donot usethesesubstancesaround your washerand/or dryer during operation, as they give

off vapors that could ignite or explode.
_e laundry processcan reducethe flame retardancv of fabrics.Toavoidsucha result,the garment

manufacturer,scare instructions shouMbefoflowed very carefufi'y.:

Do not mix chlorine bleachwith ammonia or acid suchas vinegar and/or rust remove,cMixing can
producea toxic gas whichmay causedeath.
Neverclimb on or stand on the washertop or rid.
Do not wash fibmglassarticles inyour washe,_5kin kritation could result from the remaining
particles that may be picked up by clothing during subsequentwasheruse.
R)minimize the possibfiity of ek_ctricshock,unplug this appfianceffom the power supplyor
disconnect the washerat the householddistribution panel byremoving the fuseor switching off the
circuit breaker beforeattempting any maintenance or cleaning,
Note:PressingthePOWERbutton doesNOTdisconnectthe appliance from thepower supply:,even
though thefights are out.

o Do not operate this appliance if it isdamaged malfunctioning, partially disassembledor has

missingor brokenparts, including a damagedcord or plug,

Do not operate this applianceif the lid has beenincorrecdyfitted.
Ifyou are usingan extension cord or a portable electricaloutlet device(eg.multi.-socketoutlet box),
ensurethat it is positioned so that it doesnot come into contact with water or moisture.

SAVE THESE INSTRUCTIONS

nsta ation instructions

Before you begin - read these instructions comp[ete[y and carefu[[yo

Electric Shock Hazard

Read and follow the IMPORTANT SAFETY iNSTRUCTIONS outlined in this
UserGuide before operating this appliance, pages 3 .- 5o

Improper connection of an equipment-grounding conductor can result in a
risk of electric shock° Check with a qualified e_ectrician or serviceman if you

are in doubt as to whether the appliance is propedy grounded°

Do not modi_ the plug provided with the appliance .-if it will not fit the

out_et, have a proper out_et installed by a qualified e_ectdciano

Failure to do socan result in death, e_ectric shock, fire or injury to persons°

Observe aft governing codes and ordinances.

h_stallation Requirements
Location

Your washer must be installed on firm flooring to minimize vibration during spin cycles, Concrete
flooring is best, but a wood base issufficient providing the floor support meets FHAstandards,

Your washer should not be installed on rugs or exposed to the weather,

Water Temperature
",,!ourcold water should not exceed 95°F (35°C) or your hot water exceed 149°F (65°C).

Temperatures above this may damage your washer.

Shut Off Valves
Both hot and cold shuboff valves (faucets) should be available in the laundry area.

Drain

Water may be drained into a standpipe or set tub/s[nL The standpipe must be 1 Y2"(38 ram)

minimum intedor diameter and must be open to the atmosphere.

E[ectdca[

This appliance must be supplied with 110V- 120V, 60Hz electrical supply and connected to an

individual, properly grounded branch circuit, protected by a 15 or 20 amp circuit breaker or time

delay fuse.

iiiliiii,I,IIII, ilii,iii'liilii,i_,iliill¸liiil¸liiiliiliiliiilll¸Iililiiil¸Iiliiil¸Iiliiil¸Iiliiil¸II iiiiIiliiiiliiil¸Iiliiil¸Iiliiil¸IIiiiiiliiIIIii}I!!

Insttllttion instructions _ ::i:

= Watersopp_y

Th_swashermustbeplumbed_ntobothahotandcoldwatersuppl;,or_twUlnotwork

correctly. Please ensure that both hot and (::old water are connected to the washer.
If you have an uncontrolled water-heating source (eg. a wet back or solar heatinf_!)you should

have a tempering device fitted. [his will ensure the hot water temperature remains within
safe limits. For the most suitable type of tempering device we recommend you contact a local

plumber or plumbing supply merchant _ i:i

= InletWaterStatic_ressureSpsi(3SkPa)to1S0psi(1MPa)(Ifusinf_aheadertankthenthetopof

the header tank must be at [east 39" (2 m) above the top of your clothes washer), !;

Minimum flow rate from the faucet supplying the clothes washer should be greater than

I V*gallons/rain(6liters/rain)(assumes_9"(12,7ram) diameter pipes).
Minimum heightoffaucetsto clearthe to[]ofthewasher is45" (1150ram).

= ae_u[ar[;,checkthat;,ourstandpipeorsettubJs_nk_sfreefrom[_ntorotherobstructions,which i_ii

may affect how your washer works or may cause flooding.
In mufti-storey apartments or any upper floor, the washer should be installed on a drained floor.

= Drainingmustcomplyw_thlocalby-laws.

Clothes washer safety

supervision, ii

Please superviseyoung children to ensure they do not play with this clothes washer. 1,

I !It

ff you are using an extension cord or a portable e/ectrica/ out/et device (eg° mu/ti-socket outlet
box). ensure that it, positioned so that it does not come ff_to contact with water or mo,ture.

A_essor_esaodspareparts

Available from your Fishe[_ & Paykel Deale_" or Authorized Sewke Center.

DrainHoseExtensionPartNo,42S627p

PowerCord [fthe_owerCordof;,'ourclotheswasher_sdamaged_tmustbe

replaced by a Fisher & Paykel Authorized Service Center, as it
is not a standard power cord. :'

nsta ation instructions

To ensure the best performance from your new Aqu_Fmart _

clothes washer please follow the instructions below.
Removing the packaging

'I

Remove the outer packaging.

2

Tilt the washer backwards and walk it offthe bottom

packer one foot at a time.
Remove the bottom packer from under the washer by
pulling it out the front.

Operating the washer when the bottom packer i.sin

place can re.suit _n damage to the washer°

4 Lift the lid and remove the basket packer from the basket

s Removethe hoses and accessories,

6 Keep the bottom packer and basket packer in case they are required for future transit,

Please ensure that the bottom packer has been removed before operating your washer.

Fig.1Tilt washerbdckward
to removep_s,cker

installation

Inyour clothes washer you will find:
4 rubber inserts for the levelling feet (joined together).
1 hose guide,

2inlet hoses.

° In a basement installation do not exceed a standpipe he@ht of 96" (2438 ram)°

iiiiliiiii

inI,t hos,s iiiiiiiii'iiiiiii

1 Install hoses with the straight end (with filters) fitted to the faucets (refer to Fig,3),

2 Install elbow ends onto clothes washer (inbt vaB,es are marked on the back of the washer

H=hot, C=cok9 (refer to FigA).

'_W] J,, _....

'I,'/'v, ','8' _I }

nsta ation instructions

It is IMPORTANT to level the washer to ensure good spin performance and effective detergent,
softener and bleach dispensing.

1 Separate the 4 rubber foot inserts from the moulding and fit into the feet on the base of

the washer.

2 Move the washer to its final position. (We suggest a minimum clearance of 1" (25 ram) each side).

s Adjust the feet so the washer is level and cannot rock.

"l" (25 ram) I" (25 ram)

II II Il

Adjustable feet

Rubber insert _:_

t

Fig5 Lewd/ling your w_;sher

Fig6 Minimum de:_mnces

4 Use the walls and adjacent counter tops as a sight guide to check to see if washer appears level.

Readjust the feet if necessary.

5 Open the lid and check the washer tub to see that it sits slightly' forward of centre. (See Fig. 7).

Incorrect Correct

adjustment adjustment

Fig.7

6 Turn on the water and check all hose connections for leaks. Make sure there are no kinks in the hoses.

7 Uncoil power cord and plug into wall socket

s Check for leaks, noise, vibration, correct water temperatures and proper operation in spin. Check

that the lid locks dudng spin.

iiiliiii,I=IIII, ilii,iii'liiiililliiil¸Iiliiil¸I ii¸liiil¸Iiliiil¸Iiliiil¸IiIIIIIiii iII¸IIIII¸iiiliiil¸Iiliiil¸Iiliiil¸IiIii¸IIIIIliii'iii_I1ii/i

Installation instructions

Special requirements for alcove or closet installation

The minimum ventilation clearance between the washer and adjacent walls or other surfaces is:

I"(25mm) minimum eithersideand front <:iti:::

minimom

Consideration must be given to providing adequate 60 Sq, In :}{:]i]

dearanceforinsta[[ationandservking, [[iJ I1_(3885q'cm) { {:i:
The minimum vertkal space requiredfrom floor I I H

tO overhead shelves, cabinets, ceilings etc is 59" _ I I

Closet doors must be Iouvered or otherwise N I ! ) :
ventilated and have at least 60 square inches open 60 Sq, In

area for a washer only, or if the closet contains both 388 Sq. era)

awasheranddryer,doorsmus containatleas

square inches of open area equally distributed.

o utJon

Mobile home in stallation

Installation must conform to the STANDARD FOR MOBILE HOMES, ANSI Al19.1 and NATIONAL
MOBILE' HOME CONSTRUCTION & SAFE"T'YSTANDARDS ACT"OF 1974 @L93-383).

6rounding instrlctions

Th_sappliancemustbe_rounded._ntheeventofmalfunctionorbreakdown,_round_ngwU_ _ii

reducetheriskofelectricshockb;,providinr_apathofleastresistanceforelectriccurrent.

This appliance is equipped with a cord that has an equipment-grounding conductor and a
grounding plug. The plug must be plugged into an appropriate outlet that is properly installed }

andgrounded_naccordancew_thalllocalcodesandordinances.

Specifkation subject tO change without notke.

Before you do your first wash

You owe it to yourself and your AquoSmort _ to have it installed correctly by an authorized
service agent.

Before you start, it is a good idea to go through the following checklist;

1 Hasthe basepacker been removed?

2 Is the hot hose connected to the hot valve marked'H'?

Is the cold hose connected to the cold valve marked 'C'?

s Is the drain hose threaded through the'U bend' hose guide

(with no more than sa" extended} and on to your standpipe?

4 Are the rubber inserts secured into the feet on the base of your

washer and is the washer levelled?
Refer to Installation instructions, pages 6 - 11.

AquaSmart T'_'water consumption

15.5 lb (7 kg) 20 G (76 L)

_ReguBr High Efficiency isthe default wash cycle for AquaSmartL
Note: Waterconsumptions are based on the AquoSmort _default settings,

AquaSmaW '_'capacity

Aqu_Smart _offers agenerous 15,5 [b (7 kg) capacity,The list below outlines what is included in

a 15,5 Ib(7 kg) wash load (in accordance with ANS[/AHAM HLW-ol--2002),

SBedsheets (double)
2Tablecloths

4Shirts
6 Bath towels
4]:shirts
4 Pillow cases
6Shorts
6Washcloths
SHandkerchiefs

We recommend for everyday use that you separate out your bed sheets and wash them on the
specially designed SHEETScycle,

The first time you turn your washer on

E_ectri¢ Shock Hazard

Read arid follow the IMPORTANT SAFETY _NSTRUCT[ONSoudined in this
User'Guide before operating this appliance, [}ages 3 - 5o

Failure to do so can result in death, electric shock, fire or injury to persons°

Control Panel Lighting

The panel lighting of your Aqu_Sm_rt _washer can be adjusted to suit the environment that
your washer is located in. For a low lighting situation you may need more lighting contrast and
for installations where there is a lot of ambient light, you may need less.

To adjust the control panem lighting:

1 Turn the washer on.

2 Press and hold the High Efficiency button for 2 seconds until you hear a quick beep. You will

then see a subtle change in the lighting contrast.

s To change the setting again simply repeat the process.

Your AqudSmdrt _washer leaves the factory set For low ambient light conditions.

Getting started quickly - ©ispensin9 mode

Getting started quickly

It is important to sort your clothes, particularly by color, as well as separating out bed sheets and

washing them on the SHEETScycle (refer to page 19 for more details on sorting and loading).

o Close bra clasps, do up zippers and check pockets.

Place your clothes directly into the wash basket.

",,,/ourAquoSmort _ has been designed for use with High Efficiency (HE) detergent. For example
Tidal '_HE liquid or powder, WisM_ HE liquid or powder.
Aqu_Smart _ offers a detergent dispenser for your convenience, located on the front, left hand

side of the top deck.

o For detergent dose, please follow the manufacturers directions, outlined on the detergent

package.
Pour the detergent down the detergent dispenser,
For more information on detergent, fabric softener or bleach please refer to pages 21 - 23_

F-ig.9AquoSmort r_"control p_s,nel (dispensing modal).
For th_ non-disp_nsing modal refer to pog_ l d.

Gettin 9 started quickly

1 PRESSPOWER to activate your Aquc_Smurt _ washer,
2 Select the desired WASH CYCLE that most closely matches your wash load.
3 HIGH EFFICIENCY- this light tells you when'High Efficiency' mode is recommended, and

the button allows you to switch between High Efficiency and Conventional modes (refer to

page 18),
4 Select any additional WASH OPTIONS that you may require (refer to page 26),
s If you wish to use fabric softener, place into Softener dispenser and select FABRIC SOFTENER

to turn the fabric softener option ON,

6 If you wish to use liquid bleach, place into the bleach dispenser and select BLEACH to turn

the bleach option ON,

7 PRESSSTART- your AquaSmurt _ will start to fill with water, and will automatically select the

correct water levd and wash action for your Ioad.Tb pause your AquaSmort _at any time,

simply touch START/PAUSE_

For best Fabric and color care remove your clothes as soon as the cycle has finished.

3

Failure to follow the advice in this User Guide may re.suit in damage to your garments, and
your expectations of wash pert:ormance may not be met.

Getting started quickly- Hen-dispensing mode

Note:This model DOESNOThave detergent, fabric softener or bleach dispensing abilities, Fabric

softener and bleach should not be used,

It is important to sort your clothes, particularly by color, as well as separating out bed sheets and

washing them on the SHEETScycle (refer to page 19 for more details on sorting and loading),
Close bra clasps, do up zippers and check pockets,

o ",/our AquaSmart _has been designed for use with High Efficiency (HE) liquid detergent, For

example, Tidal '_HE, Wisk _ HE,

For detergent dose, please follow the manufacturers directions, outlined on the detergent

package.

Pour the liquid detergent onto the outer edge of the basket before adding your clothes, For

more information on detergent please refer to page 21,
o Place your clothes directly into the wash basket,

Fig. 10 Aqua3mart r,_ con rYol pc_nel (non--dispensing model).
For the di pen ing mode/refer to poge 14.

Getti 9 started quickly

1 PRESSPOWER to activate your Aquc_Smurt _ washer,
2 Select the desired WASH CYCLE that most closely matches your wash load.
3 HIGH EFFICIENCY- this light tells you when 'High Efficiency' mode is recommended, and the

button allows you to switch between High Efficiency and Conventional modes on selected

cycles (refer to page 18),
4 Select any additional WASH OPTIONS that you may require eg. spin speed,
5 PRESSSTART- your AquaSmurt _ wi[[ start to fi[[ with water, and wi[[ automatically select the

correct water [evd and wash action for your Ioad,Tb pause your Aquc_Smart _at any time,

simply touch START/PAUSE,

For best Fabric and color care remove your clothes as soon as the cycle has finished,

3 5

Failure to foltow the edvice ir_this User Guide may resutt it_ damage to your garments, and

your expectations of wosh pert:ormance may not be met.

'[heuniqueAquaSmart wash

The AquaSmart _ washer has two modes of washing, High Efficiency and ConventionaJ. Both

modes start the same way, with a Detergent Activating wash.

Detergent Activating wash
Aqu_Smart _ fills the basket at the selected water temperature,
with just enough water so the clothes are saturated. This small
amount of sudsy water flows through the clothes, up a specially

designed portal and back onto the clothes in a waterfall effect.
This thoroughly dissolves and activates the detergent.

(_) High Efficiency mode

In the High EfFiciency mode the Aqu_Sm_rt_then fills with just
enough water to lift the clothes off the low profile agitator so when

it rotates, the clothes gently roll over each other. This wash uses

similar quantities of water to most Front Loaders and so, not only
do you get the benefits of water savings but the higher detergent
concentrations give you optimum soil removal.

Conventiona_ mode
The Conventional mode is the immersion wash all Tbp Loader users

are familiar with. After the Detergent Activating wash the AquaSmart _
fills with cooler water until the clothes are submerged, and gently

turns the clothes over. We recommend this mode when the dilution
effect of water can solve or prevent common wash problems. For

example, when dye or color run can be a problem, or when washing

sandy towels. The SHEETS cycle uses the Conventional mode.

Fig 11 Detergent Actiwting wash

Fig 12 High Efficiency wa h

Fig 13Convenrioncffw(;sh

Somecyclescan be used in both modes, whilst others work in only one.

Regular /
Heavy / v"

Delicate / /
Sheets /

Whites / /

Bulky /
Easy Iron V"

These two wash modes mean that your AquaSmart _washer gives you the best of both worlds,
to suit any hundry situation.

Sorting and oadin9

Fully automatic water level

You may notice that your AquaSmart '_clothes washer behaves differently from your previous
washer.

",/our AquaSmart% like all High Efficiency washers, has a fully automatic water level, This means
that, like Front Loaders, the selection of the water level is left entirely up to the washer, This

ensures optimum wash performance and water savings,

Should you wish to use more water, simply select a Conventional cycle (refer to Conventional

mode page 18).

Sorting and loading explained

it isimportant to sort your wash load to ensure optimum wash performance,

BED SHEETS - Separate out bed sheets and comforter covers and use the SHEETScycle

which has been especially designed for these items, Ensure that comforter covers are

buttoned or zipped up, To get the best possible wash for bed sheets, drop these items

directly into the washer, do not wrap them around the low profile agitator.

COLORED ITEMS - Dye or color run can be a problem with High Efficiency washers,
so separate highly colored garments (especially when they are new) and choose a
conventional cycle, Most dye transfer occurs when clothes are [eft too long in the

machine at the completion of the cycle, so try not to leave your colored clothes lingering

in the washer,

BULKY ITEMS - Comforter inners, sleeping bags, ski jackets, blankets and throws are all
items which tend to behave unusually in a clothes washer, The lighter ones can float,
while a large blanket can get very heavy and make spinning difficult. 'four Aqu_Smort M
offers a BULKY cycle designed to take care of these washing challenges,

ITEMS THAT WRINKLE - When you are concerned about creasing or wrinkling we

recommend you use the EASY IRONcycle, Alternatively select one of the Conventional
cycles, The extra water used by these cycles will help to reduce wrinkling, Reducing the
spin speed of the wash may also help,

SOIL - Very dirty, sandy, or linty loads are best washed separately to prevent transfer
onto other garments, It may be that you have new towels that create lots of lint or very

sandy beach gear. We suggest using the Conventional mode in this circumstance, eg. on
a heavy cycle.

DELICATES - To take extra special care of delicate items, we suggest using the DELICATE
cycle.

Setting and eading

Care Labeb
Care labels will tell you about the fabric of the

garment and how it should be washed.

Soil
Sort clothes according to the type and amount

of soil. Some soils suit warmer washes eg. oily

soils, while others are best washed in cold water

eg. mud, blood.

Co,or

Sort whke fabrics from colored fabrics_
Lint

Wash lint givers and lint collectors separately.
Where possible, turn lint collectors inside out

Hand Wash

Do not bleach

Do not dry

Medium iron

ExampJesof care labd symboJs

tumble

Before you load

Check pockets

Loose items can damage both your

AquoSmort _ and your clothes.
Close zippers, hooks and eyes

This is to make sure that these items do not snag on other clothes. We recommend putting

lingerie in a lingerie bag prior to washing for best care of these items.

Mend any torn garments or loose buttons
Tears or holes may become larger during washing. Remove any loose bra wires as they can
damage your washing machine and/or dryer.

Pretreat any stains

Use an appropriate sud:ace to apply treatments. Please do not use the lid of the washer as
damage may occur.

For a balanced bad

Place items dkectly into the basket.

Do not wrap large items, such as bed sheets, around the low profile agitator. Drop them straight

into the washer.

A mixture of small and large items will wash the best (remember to separate out bed sheets and

select the SHEETScycle for these).
When washing a single large item, add a large beach towel to the wash to ensure that the load

is balanced for an effective spin.

]bwels
Chenille Corduroy

Nappies

Socks

Ptease do not, under any circumstances, attempt to wash an dectric blanket in your AquaSmart TM

washer° We do not recommend washing curtains in your washer, Sunlight makes them britde so

they may disintegrate during washing,

Detergent

Choosing the right detergent

",,fourAquaSmart_ is a High Efficiency clothes washer and needs Low Sudsing Detergent to

prevent oversudsing problems, This isthe sametype of detergent Front Loadersuse and is

labelled "High Efficiency" (HE),

We recommend the use of liquid detergent for best results, If you wish to use powdered
detergent, dissolve in water first before adding to the dispenser,

There are both liquid and powdered Low Sudsing detergents. Someexamples are:
Tidal'_HEliquid or powder
WisW'_HEliquid or powder

When washing woollens usea wool detergent but use it sparingly asthese are usually very high
foaming. Do not usesoap flakes or soap powders,

How much detergent?

Use the instructions on the back of the detergent packet as a guide to the correct amount to use.
The correct amount of detergent will vary depending on the amount of soil in your clothes and
the size of your load, Jeans and work clothes may need more and towels less.

As a starting point:

Use one cap full for a large load and reduce or increase
the dosage as required,

For a small load (eg, 4 - St--shirts) use _t cap,

If you have oversudsing problems reduce your dosage.

If your clothes are not clean enough, try using a bit more,

Where do mput my detergent?

Note: Only dispensing models have detergent
dispensing ability,

For models with dispensing ability, pour your detergent into the detergent dispenser

located on the left side of the washer, We recommend that you measure your detergent first.

If you use powdered detergent, we recommend that you dissolve it in water before adding it to
the dispenser,

You will notice that most of the detergent placed in the dispenser will fall into the machine, It
will remain in an area separated from your clothes until the machine begins to fill, As the washer
fills, the dispenser will be flushed of any residue, The detergent is then mixed with water, and

specially designed ribs at the bottom of the outer tub help to rapidly dissolve the detergent to
ensure optimum wash performance,

When washing in very cold water or on the quicker cycles (eg, DELICATE) dissolving the
detergent in warm water before pouring it down the dispenser will improve wash performance,

When needed, wipe out the detergent dispenser with a damp cloth.

ff you have a nomdLspensing modal of washer we strongty recommend you use fiquid detergent
onlyo Pour the detergent onto the outer edge of the basket before adding your clothes.

£g. 14 Adding dete_gen t to
the detergent dispenser

Fabdc Softener

OMy dispensing modds have softener d_spendng abifityo Fabric softener should NOT be used

unless your machine has fabric softener dispensing abifityo

Choosing the fight cycle

Ifyou wish to usefabric softener you will need to select the FABRICSOFTENERoption which will
give you a deep rinse, If FABRKISOFTENERis not selected, the softener will not be dispensed.To

havefabdc softener dispensed select the FABRICSOFTENERoption to ON.

Adding the fabric softener

Measurethe fabric softener out into the cap and pour into
the Fabric Softener Dispenser,It will remain in the top of the
dispenser until the deep rinsewhen water flushes it into the tub.

Note: Ifyou fill beyond the MAX mark, the overflow will pour
fabric softener into the basket prematurely and contribute to

scrud (refer below).

Cleaning the dispenser

The funnel of the fabric softener (the top) clicks off easily. Simply place a finger down the center
and lift. The remaining siphon tube and Fabric Softener well is not removable and needs to be

wiped clean periodically with hot water and an old toothbrush. If the siphon tube looks partially

blocked use a cotton bud to clean.

Fig 15Adding softener into

MeFobric Softener dispen er

Scrud

Scrud is the name given to the waxy build-up that can occur within any washer when fabric

softener comes into contact with detergent, This build-up is not brought about by a fault in the
washer, If scrud builds up in the washer it can result in stains on the clothes or an unpbasant

smell in your washer,

If you wish to use fabric softener we recommend you:

Use it sparingly,

Measure it carefully to ensure you do not fill above the MAX level,
Clean the dispenser as soon as the cycle has finished,
Clean your washer regularly using the CLEAN ME cycle (see page 32),

Cold water washing increases the chance of this build-oup occurring. We recommend a warm or

hot wash at regular intervals, eg. every 5th wash.

Fig. l d Removing the F_bric Softener funnel

4%Bleach

OMy dLspendng models have Bleach dispendng ability, Bleach should NOT be used unless your
machine has bleach dispendng ability,

Choosing the right cyde

Remember to check clothing labels before you begin to ensure that garments are bleach
compatible,

If you wish to use bleach please select the BLEACH option to ON, The bleach will be diluted and
automatically released into the wash at the correct point in the cycle, This ensures maximum

bleach efficiency and optimum clothes care, If the Bleach option is not selected, bleach will not

be dispensed into the wash and will drain safely away,

When washing white items select the WHITES cycle for best performance with bleach, When
washing colors use color--safe bleach.

Note: For best clothes care, the Bulky cycle does not offer a bleach dispensing option,

Now much bleach do Juse and where do Jput it?

Liquid B_each
",/our AquaSmart _ washer requires less bleach than traditional top

loading washers, no more than 100 ml, Pour bleach into a measuring cup
with a spout, then carefully pour this into the bleach dispenser ensuring
that it does not fill higher than the MAX levek Adjust the amount of

bleach you use to the load size, eg, for smaller loads use less bleach.
Cleaning the dispenser

The funnel of the bleach dispenser clicks off easily, Simply place a
finger down the center and lift, The remaining siphon tube and bleach

receptacle is not removable and needs to be wiped dean periodically
with hot water and an old toothbrush. If the siphon tube looks partially

blocked use a cotton bud to clean.

Fig. 17 Adding bleach into
the bleach di pen er

Do not fill the bleach dispenser beyond the MAX fill mark,

Do not pour undilute4 liquid cMorine bleach directly onto clothes,

Use only h'quM chlork_e bleach _n this dLspensea

To avoid splashing and spills we recommend the use of a cup with a pouring spout.

Note: Both liquid and powdered color-safe bleach can be used in your AquaSmart _ washer.

If you use a powdered detergent, use a powdered color-safe bleach (however add this to the
detergent dispenser NOT the bleach dispenser, Follow the manufacturers instructions),

If you are using liquid detergent, use a liquid color--safe bleach (add the bleach to the bleach
dispenser, Follow the manufacturers instructions),

Failure to follow the instructions above could result in damage to clothing,

Aq uaSma rt safety featu

Auto Drain

Unsupervised clothes washers filled with water can present a drowning hazard to small children.

In order to minimize any risk of this type of accident, your AquaSmart _ has been

pre--programmed to know when this hazard is created, and drain the wash water to a safe level.

If you pause your Aqu_Sm_rt_at any time during the wash cycle when there is water in the

basket, the machine will activate the AUTO DRAIN function after 3 minutes, This will drain the
water in the wash basket to an acceptable level, removing any potential hazard.

Your washer will beep to warn you prior to AUTO DRAIN being activated.

Ifyou wish to soakclothing items during the wash process please select the SOAKoption.This
will provide you with a two hour soaL

Lid Lock

",,!ourAquaSmart _washer is able to lock its lid during the wash cycle, to provide extra safety for
you and your family while it is operating,

The Lid Lock symbol _ appears illuminated in the left hand side of the control

know at a glance if you can open the lid or not,

To unlock the lid at any time press START/PAUSE.

If the lid is left open, your AquaSmart _ washer will be unable to lock the lid, and the cycle will

be halted. The machine will beep and the Lid Lock symbol will flash to alert you. If this occurs,
ensure that the lid is closed and press S]7\RT/PAUSE.

Do not put anythfng down the Lid Lock slot in the top deck.
Do not try to disable the Lid Lock.

panel, letting

you

Wash cycles explained

Choosing you_ wash cyde

©

0 0

&

S

i i

_ 0

c_ o

m

m m

2

_ T

::c d

_ s

N N o

> _ u

0 0 _

0 0 _4"

_ s8

_ _o

_ 0 _

Changing the wash cycle options

AquaSmart _ offers five wash temperatures.

Coid Wa m,'Co dWarm W m,,HOt Hot

TempoFatuFe Warm

Cold

Hot

incoming water 91°F 102°F "l15°C Incom ng water

from faucet (33°C) (39°C) (4d'C) from faucet

Simply increase or decrease your wash temperature by pressing the
TEMPERATURE button to scroll through the options available.

Note: Some temperatures are not available on some cycles for best clothes care
(e.g DELICATE cycle).

The temperature option selects the temperature of the first phase of the two-opart
wash system, the Detergent Activating Wash.

Hint: If a hot wash is required, where both phases of the wash system are hot,
select SHEETS cycle, and "hot"temperature.

Controlled Co_d (Co_d+)
The temperature of cold water varies, depending on your location and the season.
The lower the water temperature, the less effective the wash becomes. To help

with this issue we have developed Controlled Cold asa secondary option, which
adds a small amount of warm water, when necessary, to raise your cold water

wash to 60°F (15.6°C). ]o access this secondary option please refer to page 28.

Bleach

F_sl

S/ow
Hold

Spin Speed
"..!ourAqu_Smart _washer offers three spin speeds: Fast (lO00rpm), Medium

(700rpm) and Slow (300rpm), plus an additional Spin Hold option.

Simply increase or decrease your spin speed by pressing the SPIN button to scroll
through the options available. When Spin Hold is selected the washer will stop

the cycle before the final spin. This option is ideal for drip dry items.

Fabric Softener (available on dispensing models only)
If you wish to use fabric softener in your AquaSmarH _ clothes washer, please

Off

select the FABRIC SOFTENER option. Press the FABRIC SOFTENER button to turn
this option to ON. This will adjust the wash to ensure that the fabric softener is

dispensed correctly.

Bleach (available on dispensing models only)
If you wish to use bleach in your AquaSmarH _clothes washer, please select the

Off

BLEACH option. Press the BLEACH button to turn this option to ON. This will
adjust the wash to ensure that the bleach is dispensed correctly.

Changing the wash cyde options

Soak

Soak

Advance

Note: If you wish to change any of the wash options while your AquaSmart _ is running please

press START/PAUSE then change the required option.

The Soak option adds a 2 hour soak into the middle of the wash phase of the
c.vc[e. Dunng the soak, the washer will agitate for a few seconds every' mk_ute,
At the completion of the soak period the AquaSm_rt _ will then complete the

rest of the wash cycle.T:o select Soak, press the SOAK button once to select

Soak ON.

Note: Once the Soak is under way you can exit out at any time by pressing
the SOAK button. This does not apply to BULKY cycle. For BULKY cycle to exit
SOAK press ADVANCE.

Wash

Wash Advance

Rinse

There may be times when you wish to usethe rinse and spin or spin only

portions of the wash cycle,The Advance option allows you to fast forward
your cycle to the desired location, Pressthe AD\Z&NCEbutton repeatedly to
advance the cycleto the desired position, then pressSTART.

Customizing the wash cycles

To customize a cyde

You can program your Aqu_Sm_rt _to remember the wash options you prefer for each wash
cycle. For instance, you may want to set the Regular cycle to a cold wash.

1 Press POWER.

2 Press the wash cycle button.
s Select your wash options (eg. cold wash).
4 Press and hold down the wash cycle button for 2 seconds, until you hear a beep. This will store

your customized cycle for future washes.

To change your customized wash cycle simply repeat the steps above. Note: You will be unable
to customize a wash cycle to start at the rinse or spin stage.

i i,i

Heavy Delicate Sheets /ky Easy Iron

Fig 18Cu tomizing the w(_shcycle

Changing pre-set options

Option Adjustment mode

After using your AquaSm_rt _you may want to fine tune some of the options to suit your
wash needs. There are a number of preset options, which can be altered. (Note: not all options
are available on the non-dispensing model).

The rinse option.
Changing the cold wash to Controlled Cold.

The number of beeps at the end of the cycle.
The Out of Balance recovery routine.

Resetting the washer back to the settings it left the factory with.

To enter Option Adjustment mode

1 Turn machine on at the wall but do not press POWER.

Press START/PAUSE and hold down, then press POWER.
You will hear three quick beeps and the machine will show an

unusual pattern of lights. Pages 28 -30 explain the different
options in more detail.

2 Use the buttons on the panel to make your changes to the pre--set

options.

s Press POWER to return to normal mode.
4 AquaSmart _will automatically remember your changes.

Controlled Cold

Fig 19Pres 5TAR_PAUSEond

hold down, thenpressPOlXI_£

The temperature of cold water varies widely, depending on your location and the season, The

lower the water temperature, the less effective the wash becomes, ]:o help with this issue we

have developed Controlled Cold. This adds a small amount of warm water, when necessary, to

raise your cold water wash to 60°F (15.6°C), This will ensure that you receive the most effective
wash in cold water,

1 Enter Option Adjustment mode (refer above),

2 Select COLD wash temperature,
s The wash cycle buttons show the temperature adjustment possible.

4 When the REGULAR cycle light is on, the machine will fill with cold water only,
s Press the SHEETScycle button and your Aqu_Sm_rt _will control the temperature to

approximately 60°F (15,6°C),

Note: If you always use cold or controlled cold water, we recommend that a warm or hot wash is

used regularly, eg. every 5th wash should be at least a warm one,

Hot

Temperature Wum

Fig20 Select Cold W{_sh temperature